Effect of additives on the amination of 2-oxoglutaric acid by gamma-radiation

The effect of added substances was studied on the yield of glutamic acid produced by gamma-ray irradiation of 2-oxoglutaric acid and ammonia in aqueous solution. The contents of amino acids in the irradiated solutions were determined with amino acids analyzer. Sodium nitrate, allyl alcohol or sodium formate was used as an added substance. The yield of glutamic acid significantly decreased by the addition of nitrate, and it was little affected by the addition of allyl alcohol. In the presence of formate the yield increased from G = 0.4 (2-oxoglutaric acid 0.05M and ammonium hydroxide 2M) to G = 1.1. As a result, it was found that hydrated electron contributes on the formation of glutamic acid, but hydroxyl radical does not. The yield showed a maximum at ca. 0.1 M ammonium hydroxide concentration. These facts indicate that NH2 radical does not contribute to the formation of glutamic acid. As a reaction mechanism, it can be explained that 2-oxoglutaric acid which had been reduced by hydrated electron reacts with ammonia.     

2-difluoromethylene-4-methylenepentanoic acid, a paradoxical probe able to mimic the signaling role of 2-oxoglutaric acid in cyanobacteria

2-Difluoromethylene-4-methylenepentanoic acid (DFMPA), a seemingly deviated analog of 2-oxoglutaric acid (2-OG), could surprisingly mimic its signaling function in cyanobacteria. Computer modeling revealed the favorable binding of DFMPA toward the 2-OG receptor, NtcA, via mutual conformational changes, suggesting that structural alteration of 2-OG is tolerated for it to exercise its signaling role. This extremely useful finding could be exploited for the design of affinity probes with which to study new 2-OG receptors in related signaling pathways.     

High-speed liquid chromatographic determination of phenylpyruvic acid.

A high-speed liquid chromatographic method has been developed for the determination of urinary phenylpyruvic acid. This acid is converted by treatment with naphthalene-2,3-diamine into 3-benzyl-2-hydroxybenzoquinoxaline, which is extracted into carbon tetrachloride for separation. 2-Mercaptoethanol is a useful stabilizer, and 2-chlorothioxanthone is a suitable internal standard. The method is specific, and the results are not affected by the presence of such 2-oxo-acids as pyruvic acid, 2-oxobutyric acid, 2-oxoglutaric acid, and 4-hydroxphenylpyruvic acid.     

Organic syntheses based on 2-oxoglutaric acid. V. Syntheses of novel 2H-1,4-benzothiazines and a 2,5-dihydro-1,5-benzothiazepine

Syntheses aimed on the incorporation in heterocycles of segments originating in the precursor 2-oxoglutaric acid are described. Cylocondensation of dimethyl 2-oxoglutarate 1 , dimethyl 3-bromo-2-oxoglutarate 2 , and dimethyl (E)-2-oxoglutaconate 3 with 2-aminobenzenethiol gave rise to the novel 2H-1,4-benzothiazines 4 and 5 , and the 2,5-dihydro-1,5-benzothiazepine 6 , respectively, by incorporation of either the segments C-1/C-2 or C-2/C-3 or C-3/C-4/C-5 of the precursor.     

Chemoenzymatic synthesis of glutamic acid analogues: substrate specificity and synthetic applications of branched chain aminotransferase from Escherichia coli

A new route to alpha-keto acids is described, based on the ozonolysis of enol acetates obtained from alpha-substituted beta-keto esters. Escherichia coli branched chain aminotransferase (BCAT) activity toward a variety of substituted 2-oxoglutaric acids was demonstrated analytically. BCAT was shown to have a broad substrate spectrum, complementary to that of aspartate aminotransferase, and to offer access to a variety of glutamic acid analogues. The usefulness of BCAT was demonstrated through the synthesis of several 3- and 4-substituted derivatives.     

Ru-catalyzed asymmetric hydrogenation of 3-oxoglutaric acid derivatives via solvent-assisted pinpoint recognition of carbonyls in close chemical propinquity

Upon comparison of hydrogenation rates of various β-ketocarboxylic acid derivatives, β-ketoamides were found to be hydrogenated slightly faster than β-ketoesters in EtOH in the presence of [RuCl(benzene)(S)-SunPhos]Cl at 70 °C with 20 bar of hydrogen. In THF these differences were so sharpened that β-ketoamides were hydrogenated even faster than in EtOH while the esters were extremely slow. Based on these findings, a series of 3-oxoglutaric acid derived with ester and amide moieties on the two ends were hydrogenated to 3-hydroxyl products with high enantioselectivities.     

Hydrogen—deuterium exchange at non-labile sites: A new reaction facet with broad implications for structural and dynamic determinations

Hydrogen-deuterium exchange at non-labile sites is reported. The conjugate bases of isophthalic acid (m-C6H4(CO2H)2), 2-oxoglutaric acid (HO2CCOCH2CH2CO2H), and 2-methylisophthalic acid (2-CH3-1,3-C6H4(CO2H)2) undergo scrambling with 1, 2, and 3 carbon-centered hydrogens under a variety of conditions. Likewise, protonated 2-(m-methoxyphenyl)-ethylamine ((m-CH3OC6H4)CH2CH2NH2) undergoes up to 5 H/D exchanges upon gentle activation whereas the conjugate acid of 2-phenylethylamine (C6H5CH2CH2NH2) requires the presence of ammonia-d3 in order to be pushed to undergo up to 8 H/D exchanges. The very act of electrospraying ions can result in extensive movement of deuterium to carbon centers and, in some cases, could not be prevented. These findings offer great promise for future exploitation but also suggest that the interpretation of many H/D exchange experiments using mass spectrometry as the analytical tool could be in error.     

Potentiometric detection of organic acids in liquid chromatography using polymeric liquid membrane electrodes incorporating macrocyclic hexaamines

Potentiometric detection employing coated-wire electrodes was applied to the determination of organic acids in liquid chromatography (LC). Poly(vinyl chloride)-based liquid membranes, incorporating lipophilic macrocyclic hexaamines as neutral ionophores were used as electrode coatings. The selectivity and sensitivity of the macrocycle-based electrodes were found to be superior to an electrode based on a lipophilic anion exchanger (a quaternary ammonium salt). Sensitive detection was obtained for the di- and tricarboxylic acids tartaric, malonic, malic, citric, fumaric, succinic, pyruvic, 2-oxoglutaric and maleic acids after separation in reversed-phase LC. Detection limits (signal/4sigmanoise=3) of 6 pmol for malonic acid and 2 pmol for maleic acid were attained. The detection was explained using a molecular recognition model. The hexaamine-based potentiometric electrodes had a 1-s response time at 1 ml min(-1) flow-rates. They were stable for at least 4 months, with an intra-electrode variation of 3.2% (n=5).     

Development of an HPLC-fluorescence determination method for carboxylic acids related to the tricarboxylic acid cycle as a metabolome tool

We report the simultaneous determination of the carboxylic acids related to the tricarboxylic acid (TCA) cycle, which plays an important role in producing adenosine triphosphate (ATP) and generating energy in mitochondria. Seven carboxylic acids from the TCA cycle, and pyruvic acid and 2-methylsuccinic acid, as an internal standard, were derivatized with a fluorescent reagent for carboxyl groups, 4-N,N-dimethylaminosulfonyl-7-piperazino-2,1,3-benzoxadiazole (DBD-PZ), in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and 4-N,N-dimethyaminopyridine as the coupling reagents, at 60 degrees C for 120 min. Subsequently, the excess DBD-PZ was removed efficiently using a cation-exchange cartridge, SDB-RPS (Empore). These fluorescent derivatives were separated well from each other on an octadecyl silica column (TSKgel ODS-80Ts, 250 x 4.6 mm, i.d.) with an eluent of acetonitrile-water containing 1% formic acid at a flow rate of 0.8 mL/min, and were detected fluorometrically at 560 nm, with excitation at 450 nm. The validation data were satisfactory in the range of 2.5-100 microm citric acid, isocitric acid, 2-oxoglutaric acid, succinic acid and fumaric acid. The detection limit (S/N = 3) for citric acid was 2 fmol on the column. The structures of these derivatives were confirmed by high-performance liquid chromatography-mass spectrometry, which proved that their carboxylic groups were completely labeled with DBD-PZ, except for oxaloacetic acid. This HPLC method was successfully applied to the analysis of TCA cycle metabolites in rat urine. The method will also be useful for metabolome research, such as for target analyses of metabolites with carboxyl groups, not only in urine but also in cells and organs.     

Analysis of carboxylic acid metabolites from the tricarboxylic acid cycle in Bacillus subtilis cell extract by capillary electrophoresis using an indirect photometric detection method

With a growing interest in metabolome analysis, there is a need for developing robust methods for analysis of intracellular metabolites profiles in real samples like e.g., bacteria cell. Due to their weak absorbance properties, tri- and dicarboxylic acids from TCA cycle (citric, isocitric, 2-oxoglutaric, succinic, fumaric, malic) as well as carboxylic acid metabolites from glycolysis pathway, urea cycle and metabolism of amino compounds (formic, pyruvic, lactic, acetic, glutamic) were analyzed by capillary electrophoresis (CE) with indirect UV detection. Using 4 mM 2,6-pyridinedicarboxylic acid as a highly UV absorbing carrier electrolyte, 0.2 mM cetyltrimethylammonium bromide, 10% ethylene glycol and 10% acetonitrile, pH 3.5, carboxylic acids metabolites were analyzed in Bacillus subtilis cell extract from two different cultures: glucose and malate. CE with an electrokinetic injection mode achieved limits of detection in the range of 13-54 ppb (1.12-10(-7) - 5.96-10(-7) M). The reproducibility and linearity of method was investigated with RSD for migration time less than 1.3% and acceptable correlation coefficients. The optimized CE method was used to compare metabolome content of cell extract derived from two different culture media containing either glucose or malate as a carbon source. The changes in carboxylic acid metabolites profile were observed depending from used culture medium. Carboxylic acid concentrations ranged: in cell extract from malate culture from 59 to 0.5 microM for lactate and citrate, respectively, and in cell extract from glucose culture from 133 to 0.5 microM for glutamate and citrate, respectively. Appropriate concentrations of carboxylic acid in the single bacterium cell were estimated at mM and sub-mM levels.     

Purification of Two Novel Sugar Acid-binding Lectins from <Emphasis Type="Italic">Haplomitrium Mnioides</Emphasis> (bryophyte,Plantae) and their Preliminary Characterization

Two novel sugar acid-binding lectins were purified from Haplomitrium mnioides (Lindb.) Schust. using a procedure consisting of ammonium sulfate precipitation, G-50 gel filtration, hydroxyapatite chromatography, and HW-50 gel filtration. We reported their partial physicochemical properties: molecular weight, affinity for carbohydrates and organic acids, pH stability, and dependence of their hemagglutination activity on metal ions. We also determined their N-terminal amino acid sequences. H. mnioides lectins (HMLs) were monomers (one with a molecular weight of approximately 27 kDa, and the other with a molecular weight of approximately 105 kDa) under both nonreducing and reducing conditions. They were named HML27 and HML105, respectively. Both HMLs had an affinity for N-acetylneuraminic acid, d-glucuronic acid, d-glucaric acid, bovine submaxillary mucin, heparin, and organic acids, such as citrate, 2-oxoglutaric acid, and d-2-hydroxyglutarate. Furthermore, HML27 had an affinity for α-d-galacturonic acid, d-malate, l-malate, and pyruvate, while HML105 had an affinity for d-gluconic acid. HML27 and HML105 are novel plant lectins: they have an affinity for sugar acids and organic acids and specifically recognize the carboxyl group, and there is no homology between their N-terminal amino acid sequences and those of the previously described lectins and agglutinins.     

Quantitative evaluation of the biosynthetic pathways leading to δ-aminolevulinic acid from the Shemin precursor glycine via the C5 pathway in Arthrobacter hyalinus by analysis of 13C-labeled coproporphyrinogen III biosynthesized from [2-13C]glycine, [1-13C]acetate, and [2-13C]acetate using 13C NMR spectroscopy

The biosynthetic pathways leading to δ-aminolevulinic acid (ALA) from the Shemin precursor glycine via the C5 pathway in Arthrobacter hyalinus were quantitatively evaluated by means of feeding experiments with [2-¹³C]glycine, sodium [1-¹³C]acetate, and sodium [2-¹³C]acetate, followed by analysis of the labeling patterns of coproporphyrinogen III (Copro’gen III) (biosynthesized from ALA) using ¹³C NMR spectroscopy. Two biosynthetic pathways leading to ALA from glycine via the C5 pathway were identified: i.e., transformation of glycine to l-serine catalyzed by glycine hydroxymethyltransferase, and glycine synthase-catalyzed catabolism of glycine to N ⁵,N ¹⁰-methylene-tetrahydrofolic acid (THF), which reacts with another molecule of glycine to afford l-serine. l-Serine is transformed to acetyl-CoA via pyruvic acid. Acetyl-CoA enters the tricarboxylic acid cycle, affording 2-oxoglutaric acid, which in turn is transformed to l-glutamic acid. The l-glutamic acid enters the C5 pathway, affording ALA in A. hyalinus. A ¹³C NMR spectroscopic comparison of the labeling patterns of Copro’gen III obtained after feeding of [2-¹³C]glycine, sodium [1-¹³C]acetate, and sodium [2-¹³C]acetate showed that [2-¹³C]glycine transformation and [2-¹³C]glycine catabolism in A. hyalinus proceed in the ratio of 52 and 48 %. The reaction of [2-¹³C]glycine and N ⁵,N ¹⁰-methylene-THF, that of glycine and N ⁵,N ¹⁰-[methylene-¹³C]methylene-THF generated from the [2-¹³C]glycine catabolism, and that of [2-¹³C]glycine and N ⁵,N ¹⁰-[methylene-¹³C]methylene-THF transformed the fed [2-¹³C]glycine to [1-¹³C]acetyl-CoA, [2-¹³C]acetyl-CoA, and [1,2-¹³C₂]acetyl-CoA in the ratios of 42, 37, and 21 %, respectively. These labeled acetyl-CoAs were then incorporated into ALA. Our results provide a quantitative picture of the pathways of biosynthetic transformation to ALA from glycine in A. hyalinus.     

Zur Bildung der „roten Kohle”

Zusammenfassung Es wird die Induktionsphase bei der sogenannten Polymerisation von Kohlensuboxid zur roten Kohle sowie die rote Kohle selbst IR- bzw. UV-spektroskopisch untersucht. Dabei werden Ketencarbonsäure bzw. deren Derivate und Acetondicarbonsäureanhydrid (=3-Oxoglutarsäure-anhydrid) als Polymerisationsstarter nachgewiesen und eine Polypyronostruktur der Polymeren—im Gegensatz zu den Arbeiten vonDiels ¹ undWojtczak et al.²—bestätigt.

---

Formation of red coal

The induction phase of carbon suboxide polymerization to red coal has been investigated by IR-and UV-spectroscopy. It is shown that ketene carboxylic acid, or its derivatives, and 3-oxoglutaric anhydride are the polymerization initiators, and that the polymer has a polypyrone structure. This latter finding conflicts with results obtained byDiels ¹ andWojtczak ².

---

---

Herrn Prof. Dr.R. Tschesche, Bonn, zum 65 Geburtstag gewidmet.     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

Different modes of aggregation in organoaluminium and -gallium hydroxylamides

The organoaluminium and -gallium hydroxylamides (Me2GaONMe2)2, (tBu2AlONMe2)2, (tBu2GaONMe2)2 and (Me2AlONiPr2)2 have been prepared by the reaction of the hydroxylamines Me2NOH and iPr2NOH with the trialkylmetal compounds trimethylgallium, tri-tbutylaluminium and tri-tbutylgallium, respectively. All compounds have been characterised by NMR spectroscopy (1H, 13C, 15N, 17O and 27Al), by mass spectrometry and elemental analyses. The crystal structures of the four compounds have been determined, showing that they all form dimers but with different modes of aggregation: (Me2GaONMe2)2 has a Ga2O2N2 six-membered ring, (tBu2AlONMe2)2 and (Me2AlONiPr2)2 have Al2O2 four-membered rings, (tBu2GaONMe2)2 forms a Ga2O2N five-membered ring.     

Synthesis and catalytic epoxidation activity with TBHP and H2O2 of dioxo-, oxoperoxo-, and oxodiperoxo molybdenum(VI) and tungsten(VI) compounds containing monodentate or bidentate phosphine oxide ligands: crystal structures of WCl2(O)2(OPMePh2)2, WCl2(O)(O2)(OPMePh2)2, MoCl2(O)2dppmO2.C4H10O, WCl2(O)2dppmO2, Mo(O)(O2)2dppmO2, and W(O)(O2)2dppmO2

The dioxo tungsten(VI) and molybdenum(VI) complexes WCl2(O)2(OPMePh2)2, WCl2(O)2dppmO2, and MoCl2(O)2dppmO2, the oxoperoxo compounds WCl2(O)(O2)(OPMePh2)2, WCl2(O)(O2)dppmO2, and MoCl2(O)(O2)dppmO2, and the oxodiperoxo complexes, W(O)(O2)2dppmO2 and Mo(O)(O2)2dppmO2 have been prepared and characterized by IR spectroscopy, 31P NMR spectroscopy, elemental analysis, and X-ray crystallography. The structural and X-ray crystallographic data of compounds WCl2(O)2(OPMePh2)2, WCl2(O)(O2)(OPMePh2)2, MoCl2(O)2dppmO2.4H10O, WCl2(O)2dppmO2, Mo(O)(O2)2dppmO2, and W(O)(O2)2dppmO2 are also detailed. All complexes were studied as catalysts for cis-cyclooctene epoxidation in the presence of tert-butyl hydroperoxide (TBHP) or H2O2 as an oxidant. The Mo-based catalysts showed a superior reactivity over W-based catalysts in the TBHP system. On the other hand, in the H2O2 system, the W-based catalysts (accomplishing nearly 100% epoxidation of cyclooctene in 6 h) are more reactive than the Mo catalysts (<45% under some conditions). Various solvent systems have been investigated, and ethanol is the most suitable solvent for the H2O2 system.     

Binuclear iron-sulfur complexes with bidentate phosphine ligands as active site models of Fe-hydrogenase and their catalytic proton reduction

The displacement of CO in a few simple Fe(I)-Fe(I) hydrogenase model complexes by bisphosphine ligands Ph2P-(CH2)n-PPh2 [with n = 1 (dppm) or n = 2 (dppe)] is described. The reaction of [{mu-(SCH2)2CH2}Fe2(CO)6] (1) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)6] (2) with dppe gave double butterfly complexes [{mu-(SCH2)2CH2}Fe2(CO)5(Ph2PCH2)]2 (3) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5(Ph2PCH2)]2 (4), where two Fe2S2 units are linked by the bisphosphine. In addition, an unexpected byproduct, [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5{Ph2PCH2CH2(Ph2PS)}] (5), was isolated when 2 was used as a substrate, where only one phosphorus atom of dppe is coordinated, while the other has been converted to P=S, presumably by nucleophilic attack on bridging sulfur. By contrast, the reaction of 1 and 2 with dppm under mild conditions gave only complexes [{mu-(SCH2)2CH2}Fe2(CO)5(Ph2PCH2PPh2)] (6) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5(Ph2PCH2PPh2)] (8), where one ligand coordinated in a monodentate fashion to one Fe2S2 unit. Furthermore, under forcing conditions, the complexes [{mu-(SCH2)2CH2}Fe2(CO)4{mu-(Ph2P)2CH2}] (7) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)4{mu-(Ph2P)2CH2}] (9) were formed, where the phosphine acts as a bidentate ligand, binding to both the iron atoms in the same molecular unit. Electrochemical studies show that the complexes 3, 4, and 9 catalyze the reduction of protons to molecular hydrogen, with 4 electrolyzed already at -1.40 V versus Ag/AgNO3 (-1.0 V vs NHE).     

Film growth precursor development for metal nitrides. Synthesis, structure, and volatility of molybdenum(VI) and tungsten(VI) complexes containing bis(imido)metal fragments and various nitrogen donor ligands

The molybdenum and tungsten complexes W2(NtBu)4(pz)4(pzH).(C6H14)0.5 (pz = pyrazolate), M(NtBu)2(Me2pz)2(Me2pzH)2 (Me2pz = 3,5-dimethylpyrazolate), M(NtBu)2(tBu2pz)2 (tBu2pz = 3,5-di-tert-butylpyrazolate), M2(NtBu)4(Me2pz)2Cl2, W(NtBu)2(C2N3(iPr)2)2py2, M(NtBu)2-(CN4CF3)2py2, and W(NtBu)2(PhNNNPh)2 were prepared by various synthetic routes from the starting materials Mo(NtBu)2Cl2, W(NtBu)2(NHtBu)2, and W(NtBu)2Cl2py2. These new complexes were characterized by spectral and analytical methods and by X-ray crystal structure determinations. The volatilities and thermal stabilities were evaluated to determine the potential of the new complexes for use in thin film growth of metal nitride films. Mo(NtBu)2(tBu2pz)2 and W(NtBu)2(tBu2pz)2 were found to have the optimum combination of volatility and thermal stability for application in atomic layer deposition thin film growth procedures.     

Rare tetranuclear mixed-valent [Mn(II)2Mn(IV)2] clusters as building blocks for extended networks

We report the synthesis of a series of mixed valence Mn(II/IV) tetranuclear clusters [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(EtOH)(6)Br(2)]Br(2) (), [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(H(2)O)(2)Cl(4)].2EtOH.H(2)O (.2EtOH.H(2)O), [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(heedH(2))(2)](ClO(4))(4) (), [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(MeCN)(2)(H(2)O)(2)(bpy)(2)](ClO(4))(4) () and [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(bpy)(2)Br(4)].2MeOH (.2MeOH). Clusters are constructed from the tripodal ligand N,N-bis(2-hydroxyethyl)ethylene diamine (heedH(2)) and represent rare examples of tetranuclear Mn clusters possessing the linear trans zig-zag topology, being the first Mn(II/IV) mixed-valent clusters of this type. The molecular clusters can then be used as building blocks in tandem with the (linear) linker dicyanamide ([N(CN)(2)](-), dca(-)) for the formation of a novel extended network {[Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(H(2)O)(2)(MeOH)(2)(dca)(2)]Br(2)}(n) (), which exhibits a rare form of the 2D herring bone topology.     

Side-on bound dinitrogen complex of zirconium supported by a P2N2 macrocyclic ligand

Reduction of [P 2N 2]ZrCl 2 (where P 2N 2 = PhP(CH 2SiMe 2NSiMe 2CH 2) 2PPh) by KC 8 under N 2 generates the dinuclear dinitrogen complex ([P 2N 2]Zr) 2(mu-eta (2):eta (2)-N 2) and impurities in varying yields depending on the solvent and temperature. The toluene complex [P 2N 2]Zr(eta (6)-C 7H 8) along with a dinuclear species with bridging PC 6H 5 groups is observable. Also observable in the crude reaction mixtures is the mu-oxodiazenido derivative, ([P 2N 2]Zr) 2(mu-eta (2):eta (2)-N 2H 2)(mu-O), due to reaction with trace H 2O. This paper reports the full details of the preparation of ([P 2N 2]Zr) 2(mu-eta (2):eta (2)-N 2) including an improved method that involves reduction at low temperatures in a tetrahydrofuran solvent. Also reported is a reproducible synthesis of the oxodiazenido complex along with the X-ray structures of the dinitrogen complex and the oxodiazenido derivative.