STM study of morphology and electron transport features in cytochrome c and nanocluster molecule monolayers.

The morphology and electron tunneling through single cytochrome c and nanocluster Pt(5)(CO)(7)[P(C(6)H(5))](4) molecules organized as monolayer Langmuir-Blodgett (LB) films on graphite substrate have been studied experimentally using scanning tunneling microscopy (STM) and spectroscopy techniques with sub-nanometer spatial resolution in a double barrier tunnel junction configuration STM tip-monomolecular film-conducting substrate at ambient conditions. STM images of the films revealed globular structures with characteristic diameters (approximately 3.5 nm for the protein molecule and approximately 1.2 nm for the nanocluster). The spectroscopic study by recording the tunneling current-bias voltage (I-V) curves revealed tunneling I-V characteristics with features as steps of different width and heights that are dependent on the STM tip position over the molecule in the monolayer, giving evidence for sequential discrete electron-tunneling effects with the combination of the single electron Coulomb-charging energy and the electronic energy level separation (molecular spectrum) in such immobilized metalloprotein and nanocluster structures that can be of interest for the development of bioelectronic and hybrid functional nanosystems.     

Molecular Dissociation on the SiC(0001) 3×3 Surface

In the framework of density functional theory, the adsorption of the halogenated polycyclic aromatic hydrocarbon 2,11‐diiodohexabenzocoronene (HBC‐I₂) on the SiC(0001) 3×3 surface has been investigated. Nondissociative and dissociative molecular adsorption is considered, and simulated scanning tunneling microscopy (STM) images are compared with the corresponding experimental observations. Calculations show that dissociative adsorption is favorable and reveal the crucial importance of the extended flat carbon core on molecule–surface interactions in dissociative adsorption; the iodine atom–surface interaction is of minor importance. Indeed, removing iodine atoms does not significantly affect the STM images of the central part of the molecule. This study shows that the dissociation of large halogenated polycyclic aromatic hydrocarbon molecules can occur on the SiC surface. This opens up interesting perspectives in the chemical reactivity and functionalization of wide band gap semiconductors.     

In situ wiring of single molecules into an electrical circuit via electrochemical distance tunneling spectroscopy

The electrical conductance of single n-alkanethiol and alpha,omega-alkanedithiol molecules was measured via in situ distance tunneling spectroscopy in aqueous 0.1 M KOH solution. The statistical analysis of the conductance values show that the alpha,omega-alkanedithiol molecule trapped in the STM break junction can adopt two distinct geometries that result in "lower" and "higher" conductivity values. In contrast, n-alkanethiol molecules trapped in the junction show only a single conductivity value characteristic for a particular molecule. Furthermore, the "lower" conductivity value determined for alpha,omega-alkanedithiol is virtually identical to the electrical conductivity of the n-alkanethiol containing the same number of atoms in the backbone. Moreover when the STM tip is polarized to electrochemical potential preventing a chemical reaction between the terminal -SH group and Au, only "lower" conductivity values are observed for alpha,omega-alkaneditiols.     

Synthesis of a giant 222 carbon graphite sheet

In this paper we present the synthesis and characterization of the so far largest polycyclic aromatic hydrocarbon (PAH), containing 222 carbon atoms or 37 separate benzene units. First a suitable three-dimensional oligophenylene precursor molecule is built up by a sequence of Diels-Alder and cyclotrimerization reactions and then planarized in the final step by oxidative cyclodehydrogenation to the corresponding hexagonal PAH. Structural proof is based on isotopically resolved MALDI-TOF mass spectra and electronic characteristics are studied by UV/Vis spectroscopy.     

Regularities in the retention of nonsubstituted polynuclear aromatic hydrocarbons in liquid chromatography on polar adsorbents

Summary The retention of polynuclear aromatic hydrocarbons (PAH) is studied in liquid chromatography, using columns packed with silica gel with a hydroxylated surface and the same silica gel with surface-bonded amine and nitrile groups. A linear relationship was found between retention and the number of π-electrons in the molecule, the size of the molecule and the different types of carbon atoms in the molecule. The different carbon atoms in a PAH molecule contribute differently to the retention and this contribution depends on the nature of the polar functional groups on the adsorbent's surface and on the nature and concentration of a polar modifier present in a non-polar eluent.     

Electric field effect on the vibration of single CO molecules in a scanning tunneling microscope junction

A low-temperature scanning tunneling microscope (STM) and ab initio calculations were used to study the electric field effect on the vibration of single CO molecules in an STM junction at 13 K. The vibrational energy of CO molecules adsorbed on silver atoms, measured by STM-based inelastic electron tunneling spectroscopy, depends on the direction of the electric field applied between the STM tip and the silver species. This characteristic can be explained by the charge separation model. The electric field modifies the binding characteristics of CO on silver as a result of a change in the charged states of the species, which leads to an increase (or a decrease) of the energies of the hindered rotation and the CO stretch on silver.     

Single-molecule chemistry and analysis: mode-specific dehydrogenation of adsorbed propene by inelastic electron tunneling

A single propene molecule, located in the junction between the tip of a scanning tunneling microscope (STM) and a Cu(211) surface can be dehydrogenated by inelastic electron tunneling. This reaction requires excitation of the asymmetric C-H stretching vibration of the ═CH(2) group. The product is then identified by inelastic electron tunneling action spectroscopy (IETAS).     

隧道结电场辅助下叔丁胺分子在Cu(111)表面跳跃(英文)

采用扫描隧道显微镜(STM)于78 K研究了单个叔丁胺分子在Cu(111)表面的横向跃迁现象.研究发现叔丁胺分子的跳跃几率随隧道电流的增加而线性增加,这表明该过程是单电子激发过程;在不同极性的隧道结电场作用下,叔丁基胺分子跳跃行为发生的几率不同,这种现象可以用电场辅助的扩散过程解释.在不同极性电场作用下叔丁胺分子在Cu(111)表面的吸附能和扩散势垒不同,从而表现出不同的跳跃几率.     

The growth of silver on an ordered alumina surface

The growth of Ag on an ordered Al2O3 surface was studied by low energy ion scattering spectroscopy (LEIS), scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and temperature programmed desorption (TPD). Three-dimensional (3D) growth of Ag clusters was observed with STM and LEIS, with the cluster size increasing with Ag coverage. The XPS core level binding energies and the Auger parameters indicate a weak interaction between the Ag clusters and the Al2O3 support. Final state effects are determined to be the primary contribution to the Ag core level binding energy shift. Nonzero order kinetics was observed for Ag desorption in TPD with the Ag sublimation energy decreasing with decreasing cluster size.     

Cr掺杂ZnO(10(¯1)0)表面的原子结构和电子性质研究

多相催化中ZnO基催化剂广泛应用于甲醇合成、水汽变换和合成气转化等诸多领域.近期发展的ZnCrOx-分子筛双功能催化剂(OX-ZEO)打破了传统合成气转化的ASF分布,能够高选择性地实现CO加氢转化为低碳烯烃.其中CO在ZnCrOx表面活化被认为是OX-ZEO催化的关键基元过程,但是ZnCrOx表面的活性位组成和结构目...     

A core-shell strategy for constructing a single-molecule junction

Understanding the effects of intermolecular interactions on the charge-transport properties of metal/molecule/metal junctions is an important step towards using individual molecules as building blocks for electronic devices. This work reports a systematic electron-transport investigation on a series of "core-shell"-structured oligo(phenylene ethynylene) (Gn-OPE) molecular wires. By using dendrimers of different generations as insulating "shells", the intermolecular π-π interactions between the OPE "cores" can be precisely controlled in single-component monolayers. Three techniques are used to evaluate the electron-transport properties of the Au/Gn-OPE/Au molecular junctions, including crossed-wire junction, scanning tunneling spectroscopy (STS), and scanning tunneling microscope (STM) break-junction techniques. The STM break-junction measurement reveals that the electron-transport pathways are strongly affected by the size of the side groups. When the side groups are small, electron transport could occur through three pathways, including through single-molecule junctions, double-molecule junctions, and molecular bridges between adjacent molecules formed by aromatic π-π coupling. The dendrimer shells effectively prohibit the π-π coupling effect, but at the same time, very large dendrimer side groups may hinder the formation of Au-S bonds. A first-generation dendrimer acts as an optimal shell that only allows electron transport through the single-molecule junction pathway, and forbids the other undesired pathways. It is demonstrated that the dendrimer-based core-shell strategy allows the single-molecule conductance to be probed in a homogenous monolayer without the influence of intermolecular π-π interactions.     

Supramolecular staircase via self-assembly of disklike molecules at the solid-liquid interface.

A series of soluble hexabenzocoronene (HBC) derivatives with pendant optically active (S)-3,7-dimethyloctanyl and (R,S)-3,7-dimethyloctanyl (mixture of stereoisomers) hydrocarbon side chains with and without a phenylene spacer were assembled into differently ordered arrays at the interface between a solution and the basal plane of highly oriented pyrolytic graphite (HOPG). Molecularly resolved scanning tunneling microscopy (STM) images revealed that all derivatives self-assemble into oriented crystals in quasi-two dimensions. However, while for the alkyl-substituted HBCs (1,4) all of the single aromatic cores within a monolayer exhibit the same contrast in the STM, the single aromatic cores with a phenylene group between the alkyl side chains and the aromatic core (2a,2b,3) exhibit different contrasts within a monolayer. For the disks carrying racemic branched or n-alkyl side chains (2b,3) a random distribution of the two different contrasts within the 2D-crystal is observed, while the optically active phenylene-alkyl-substituted HBC (2a) exhibits a periodical distribution of three contrasts within the monolayer. We attribute the different contrasts of the aromatic cores in the presence of the phenylene groups to a loss of the planarity of the whole molecule and different conformations, which allow the conjugated disks to attain different equilibrium positions above the surface of HOPG. In the case of the optically active side chains a regular superstructure with three distinctly different positions such as in a staircase is attained. The self-assembly processes are governed by the interplay of intramolecular as well as intermolecular and interfacial interactions. In the present case, the interactions may induce both the molecules to acquire well distinct positions along the z axis and to adopt different conformations. The reported results open new avenues of exploration. For instance, the different couplings of conjugated molecules with the substrate at different separations can be investigated by means of scanning tunneling spectroscopy (STS). Furthermore, experiments on the STM tip-induced switching of single molecules embedded in a monolayer appear feasible.     

The initiation and characterization of single bimolecular reactions with a scanning tunneling microscope

A scanning tunneling microscope (STM) operating at 9 K in ultrahigh vacuum was used to initiate a bimolecular reaction between isolated hydrogen sulfide and dicarbon molecules on the Cu(001) surface. The reaction products ethynyl (CCH) and sulfhydryl (SH) were identified by inelastic electron tunneling spectroscopy (STM-IETS) and by sequentially removing hydrogen atoms from an H2S molecule using energetic tunneling electrons. For comparison, the thermal diffusion and reaction of H2S and CC at 45 K and H2O and CC at 9 K were also observed.     

Correlation of reaction sites during the chlorine extraction by hydrogen atom from ClSi(100)-2x1

The Cl abstraction by gas-phase H atoms from a Cl-terminated Si(100) surface was investigated by scanning tunneling microscopy (STM), high-resolution core level photoemission spectroscopy, and computer simulation. The core level measurements indicate that some additional reactions occur besides the removal of Cl. The STM images show that the Cl-extracted sites disperse randomly in the initial phase of the reaction, but form small clusters as more Cl is removed, indicating a correlation between Cl-extracted sites. These results suggest that the hot-atom process may occur during the atom-adatom collision.     

Metal-molecule-metal junctions in Langmuir-Blodgett films using a new linker: trimethylsilane

Herein trimethylsilane (TMS) is demonstrated to be an efficient binding group suitable for construction of metal-molecule-metal (M-mol-M') junctions, in which one of the metal contacts is an atomically flat gold surface and the other a scanning tunnelling microscopy (STM) tip. The molecular component of the M-mol-M' devices is an oligomeric phenylene ethynylene (OPE) derivative Me(3)Si C≡C{C(6)H(4)C≡C}(2)C(6)H(4)NH(2), featuring both Me(3)SiC≡C and NH(2) metal contacting groups. This compound can be assembled into Langmuir-Blodgett (LB) films on Au--substrates by surface binding through the amine groups. Alternatively, low coverage (sub-monolayer) films are formed by adsorption from solution. In the case of condensed monolayers top electrical contacts are formed to STM tips through the TMS end group. In low coverage films, single molecular bridges can be formed between the gold surface and a gold STM tip. The similarity in the I-V response of a one-layer LB film and the single molecule conductance experiments reveals several points of critical importance to the design of molecular components for use in the construction of M-mol-M' junctions. Firstly, the presence of neighbouring π systems does not have a significant effect on the conductance of the M-mol-M' junction. Secondly, in the STM configuration, intermolecular electron hopping does not significantly enhance the junction transport characteristics. Thirdly, the symmetric behaviour of the I-V curves obtained, despite the different metal-molecule contacts, indicates that the molecule is simply an amphiphilic electron-donating wire and not a molecular diode with strong rectifying characteristics. Finally, the conductance values obtained from the amine/TMS-contacted OPE described here are of the same order of magnitude as thiol anchored OPEs, making them attractive alternatives to the more conventionally used thiol-contacting chemistry for OPE molecular wires.     

Inelastic tunneling spectroscopy of gold-thiol and gold-thiolate interfaces in molecular junctions: The role of hydrogen

It is widely believed that when a molecule with thiol (S-H) end groups bridges a pair of gold electrodes, the S atoms bond to the gold and the thiol H atoms detach from the molecule. However, little is known regarding the details of this process, its time scale, and whether molecules with and without thiol hydrogen atoms can coexist in molecular junctions. Here, we explore theoretically how inelastic tunneling spectroscopy (IETS) can shed light on these issues. We present calculations of the geometries, low bias conductances, and IETS of propanedithiol and propanedithiolate molecular junctions with gold electrodes. We show that IETS can distinguish between junctions with molecules having no, one, or two thiol hydrogen atoms. We find that in most cases, the single-molecule junctions in the IETS experiment of Hihath et al. [Nano Lett. 8, 1673 (2008)] had no thiol H atoms, but that a molecule with a single thiol H atom may have bridged their junction occasionally. We also consider the evolution of the IETS spectrum as a gold STM tip approaches the intact S-H group at the end of a molecule bound at its other end to a second electrode. We predict the frequency of a vibrational mode of the thiol H atom to increase by a factor ～2 as the gap between the tip and molecule narrows. Therefore, IETS should be able to track the approach of the tip towards the thiol group of the molecule and detect the detachment of the thiol H atom from the molecule when it occurs.     

Diboraperylene Diborinic Acid Self-Assembly on Ag(111)—Kagome Flat Band Localized States Imaged by Scanning Tunneling Microscopy and Spectroscopy

Replacement of sp²-hybridized carbon in polycyclic aromatic hydrocarbons (PAHs) by boron affords electron-deficient π-scaffolds due to the vacant p_z-orbital of three-coordinate boron with the potential for pronounced electronic interactions with electron-rich metal surfaces. Using a diboraperylene diborinic acid derivative as precursor and a controlled on-surface non-covalent synthesis approach, we report on a self-assembled chiral supramolecular kagome network on an Ag(111) surface stabilized by intermolecular hydrogen-bonding interactions at low temperature. Scanning tunneling microscopy (STM) and spectroscopy (STS) reveal a flat band at ca. 0.33 eV above the Fermi level which is localized at the molecule center, in good agreement with tight-binding model calculations of flat bands characteristic for kagome lattices.     

Self-assembly of small polycyclic aromatic hydrocarbons on graphite: a combined scanning tunneling microscopy and theoretical approach

Self-assembled monolayers of chrysene and indene on graphite have been observed and characterized individually with scanning tunneling microscopy (STM) at 80 K under low-temperature, ultrahigh vacuum conditions. These molecules are small, polycyclic aromatic hydrocarbons (PAHs) containing no alkyl chains or functional groups that are known to promote two-dimensional self-assembly. Energy minimization and molecular dynamics simulations performed for small groups of the molecules physisorbed on graphite provide insight into the monolayer structure and forces that drive the self-assembly. The adsorption energy for a single chrysene molecule on a model graphite substrate is calculated to be 32 kcal/mol, while that for indene is 17 kcal/mol. Two distinct monolayer structures have been observed for chrysene, corresponding to high- and low-density assemblies. High-resolution STM images taken of chrysene with different bias polarities reveal distinct nodal structure that is characteristic of the molecular electronic state(s) mediating the tunneling process. Density functional theory calculations are utilized in the assignment of the observed electronic states and possible tunneling mechanism. These results are discussed within the context of PAH and soot particle formation, because both chrysene and indene are known reaction products from the combustion of small hydrocarbons. They are also of fundamental interest in the fields of nanotechnology and molecular electronics.     

Closed-shell polycyclic aromatic hydrocarbon cations: a new category of interstellar polycyclic aromatic hydrocarbons

Density functional theory has been employed to calculate the harmonic frequencies and intensities of a range of polycyclic aromatic hydrocarbon (PAH) cations that explore both size and electronic structure effects on the infrared spectroscopic properties of these species. The sample extends the size range of PAH species considered to more than 50 carbon atoms and includes several representatives from each of two heretofore unexplored categories of PAH cations: (1) fully benzenoid PAH cations whose carbon skeleton is composed of an odd number of carbon atoms (C(odd) PAHs); and (2) protonated PAH cations (HPAH+). Unlike the radical electronic structures of the PAH cations that have been the subject of previous theoretical and experimental work, the species in these two classes have a 'closed'-shell electronic configuration. The calculated spectra of circumcoronene, C54H18, in both neutral and (radical) cationic form are also reported and compared with those of the other species. Overall, the C(odd) PAHs spectra are dominated by strong CC stretching modes near 1600 cm(-1) and display spectra that are remarkably insensitive to molecular size. The HPAH+ species evince a more complex spectrum consistent with the added contributions of aliphatic modes and their generally lower symmetry. Finally, for both classes of closed-shell cations, the intensity of the aromatic CH stretching modes is found to increase with molecular size far out of proportion with the number of CH groups, approaching a value more typical of neutral PAHs for the largest species studied.     

金属/分子/金属结的电子输运机理与表征

金属/分子/金属结是分子电子学中的基本单元.根据电子的相位是否发生改变,分子结中的电子输运可以分为相干输运和非相干输运两类.在实验上,分子结的表征方法可以分为电学性质表征和非电学性质表征两类.本文借助能级图,首先对分子结的电子输运机理作了简明解释.在此基础上,结合文献报道和本课题组此前的工作,对分子结的一些常用电学表征方法,包括电流-电压特性曲线、电流-时间曲线、电导统计柱状图、转变电压谱、散粒噪声测试、非弹性电子隧道谱和热电效应法进行了介绍.