P(MMA-M12-BPMA)乳液的合成及紫外吸收性能

以甲基丙烯酸甲酯(MMA)、可聚合乳化剂马来酸酐衍生物磺酸钠(M12)和可聚合紫外线吸收剂2-羟基-4-(3-甲基丙烯酰氧基-2-羟基丙氧基)苯甲酮(BPMA)为原料,采用乳液聚合方法制备了P(MMA-M12-BP-MA)共聚物乳液。通过转化率、红外光谱、以及紫外吸收光谱测定,分别研究了M12含量对聚合反应速率的影响、所得共聚产物的结构、以及共聚物乳液和共聚物紫外吸收特性。结果表明,随M12含量增大,聚合反应速率增加;BPMA含量增大有利于提高共聚物乳液和共聚物紫外吸收性能。     

Studies on UV‐stability of poly(MMA‐co‐M12‐co‐BPMA)/TiO2composite particles prepared by ultrasonically initiated emulsion polymerization

In this paper, poly(methyl methacrylate‐co‐sodium sulfopropyl lauryl maleate‐co‐2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylpropoxy) benzophenone)/TiO₂ (i.e., poly(MMA‐co‐M12‐co‐BPMA)/TiO₂) composite particles were prepared by ultrasonically initiated emulsion polymerization. To study the dispersion and UV‐stability of the composite particles, laser diffraction particle size analyzer (LDPSA), ultraviolet‐visible absorption spectroscopy (UV‐vis), UV‐vis diffuse reflectance spectroscopy (DRS), differential scanning calorimeter (DSC), and the weight loss measurement were used. The results indicate that the dispersion of the poly(MMA‐co‐M12‐co‐BPMA)/TiO₂ composite particles prepared by ultrasonically initiated emulsion polymerization is good. And the composite particles can absorb UV light; the ultraviolet absorption strength of poly(MMA‐co‐M12‐co‐BPMA) grafted onto the surface of TiO₂ has not changed after UV irradiation while that of PMMA changed significantly. The UV absorption strength, weight loss, and Tg changes are in the order PMMA> poly(MMA‐co‐M12‐co‐BPMA) >PMMA grafted onto TiO₂> poly(MMA‐co‐M12‐co‐BPMA) grafted onto TiO₂. These results show that the ultrasonically initiated emulsion polymerization will enhance the UV stability of composite particles, and the UV‐stability of PMMA can be enhanced by the introduction of the organic UV‐stabilizer BPMA and the inorganic UV‐stabilizer titanium dioxide into the PMMA chains by covalent bond, and the effect of the BPMA and the TiO₂ used together is better than that used, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

大分子紫外线吸收剂的制备及其在聚偏氟乙烯中的应用

通过原子转移自由基聚合(ATRP)方法,将反应型紫外线吸收剂2-羟基-4-(3-甲基丙烯酸酯基-2-羟基丙氧基)二苯甲酮(BPMA)与甲基丙烯酸甲酯(MMA)共聚合成紫外线吸收剂P(MMA-co-BPMA),然后共混涂膜制备出具有紫外线吸收性能的聚偏氟乙烯(PVDF)复合膜。 通过核磁共振谱(NMR)、凝胶渗透色谱(GPC)、差示扫描量热仪(DSC)等技术手段对BPMA及P(MMA-co-BPMA)的结构和性能进行表征,通过紫外-可见光谱(UV-Vis)对制备的复合膜的紫外线吸收性能进行表征。 结果表明,大分子紫外线吸收剂P(MMA-co-BPMA)相对分子量分布较窄,为1.11。 当BPMA质量分数为0.68%时,P(MMA-co-BPMA)/PVDF复合膜在200~345 nm范围内透过率可降至0.4%以下,能够实现对紫外线的完全吸收。 抽提实验表明紫外线吸收剂大分子化可有效地防止外迁移。     

Preparation and characterization of poly(MMA-M12-BPMA)/TiO2 composite particles

In this paper, poly(MMA-M12-BPMA)/TiO₂ composite particles were prepared by the copolymerization of a reactive surfactant sodium sulfopropyl-laurylmaleate (M12) and a reactive UV-stabilizer 2-hydroxy-4-(3-methacryloxy-2-hydroxylpropoxy) benzophenone (BPMA) with methyl methacrylate (MMA) in the presence of TiO₂. The structure and performance of composite particles were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, gel permeation chromatography, ultraviolet–visible absorption spectroscopy, differential scanning calorimeter, and scanning electron microscope.The measurement results indicate that the percentage of grafting and the grafting efficiency can reach 336.87% and 36.38%, respectively, and the glass transition temperature of poly(MMA-M12-BPMA)/TiO₂ composite particles is higher than that of poly(MMA-M12-BPMA); the size of the composite particles is about 130–200 nm. The poly(MMA-M12-BPMA) grafted from the surface of TiO₂ keeps the excellent characteristic of BPMA that possesses high absorbance of ultraviolet light, which is very important for improving UV-resistant performance of the polymethyl methacrylate. These research results are very useful for preparing polymethyl methacrylate with resistance to UV light.     

窄能隙共轭聚合物:聚[(3-烷基)噻吩-2,5]-取代苯甲烯衍生物的合成与表征

合成了3-丁基噻吩和3-辛基噻吩,并分别与对硝基苯甲醛和对二甲氨基苯甲醛进行聚合反应得到了具有极低能隙的聚(3-丁基噻吩)对硝基苯甲烯(PBTNBQ)、聚(3-丁基噻吩)对二甲氨基苯甲烯(PBTDMABQ)和聚(3-辛基噻吩)对二甲氨基苯甲烯(POTDMABQ).采用红外光谱、核磁共振氢谱和紫外-可见吸收光谱确认了产物的结构,发现中间产物聚(3-烷基)噻吩取代苯甲烷衍生物中存在部分醌化产物.根据E_g与入射光子能量hν的关系,采用2种模型计算了3种聚合物薄膜的光学禁带宽度为PBTNBQ1.63,1.84eV;PBTDMABQ1.44,1.75eV和POTDMABQ1.32,1.69eV,属窄能隙共轭聚合物.     

Characterization of amphiphilic hydrocarbon modified Poly(ethylene glycol) synthesized through ring-opening reaction of 2-(1-octadecenyl)succinic anhydride

Poly(ethylene glycol) (PEG) triblock and diblock amphiphilic block copolymers were synthesized from poly(ethylene glycol) and poly(ethylene glycol) monomethyl ether, respectively. The hydroxyl groups of PEG readily react with 2-(1-octadecenyl) succinic anhydride (OSA) at 140 °C through ring-opening reaction of the succinic anhydride. Both the PEG-OSA diblock and triblock copolymers are produced without use of any solvent or catalyst. The molecular structure of the copolymers was characterized by ¹H NMR and FTIR spectroscopy, and the thermal properties by DSC. The behavior of the copolymers in selective and nonselective solvents was studied by ¹H NMR spectroscopy in deuterium oxide and d-chloroform. The aggregation of the polymers in water was studied with a particle size analyzer and a transmission electron microscope (TEM) in bright field mode. The results show that the hydrophobic C₁₈ chain with intramolecular succinic anhydride linker can be attached to the hydrophilic PEG chain, an ester bond forming between the blocks. The copolymers exhibit flexible, liquid-like hydrophobic blocks even in water, which is a nonsolvent for OSA. PEG-OSA block copolymers self-organize in water, forming micellar polymer aggregates in nanoscale.     

Synthesis of a dipyrromethane functionalized monomer and optoelectrochromic properties of its polymer

A dipyrromethane functionalized monomer; 5-(4-tert-butylphenyl)dipyrromethane (BPDP) was synthesized. The structure of the monomer was characterized by nuclear magnetic resonance (¹H NMR and ¹³C NMR) and Fourier transform infrared (FTIR) spectroscopies. Electrochemical polymerization of BPDP was performed in acetonitrile (AN)/LiClO₄. The resulting conducting polymer was characterized by FTIR spectroscopy and electrical conductivity measurements. Spectroelectrochemical behavior and switching ability of P(BPDP) film were investigated by UV-Vis spectroscopy. P(BPDP) revealed color changes between yellow and blue in the reduced and oxidized states, respectively. In order to investigate electrochromic properties and stability of the P(BPDP) in electrochromic device (ECDs) application, dual type polymer ECD based on P(BPDP) and poly(ethylene dioxythiophene) (PEDOT) were constructed. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-Vis spectroscopy and cyclic voltammetry.     

Schiff base substitute polyphenol and its metal complexes derived from o‐vanillin with 2,3‐diaminopyridine: synthesis,characterization, thermal,and conductivity properties

Poly‐2,3‐bis[(2‐hydroxy‐3‐methoxyphenyl)methylene]diamino pyridine (PHMPMDAP) that a new Schiff base polymer has been synthesized and characterized by spectroscopy, elemental, and thermal analyses techniques. This azomethine polymer was found to form complexes readily with Cu(II), Zn(II), Co(II), Pb(II), and Fe(II). From IR and UV‐Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the polymer to be more stable than the monomer. The structure of the polymer obtained was confirmed by FT‐IR, UV‐Vis, ¹³C‐NMR, and ¹H‐NMR. Characterization was undertaken by TGA, size exclusion chromatography (SEC), and solubility tests. Also, electrical conductivities of PHMPMDAP and polymer–metal complexes are measured by four probe technique. Copyright © 2008 John Wiley & Sons, Ltd.     

Condensation polymers containing silicon and germanium in the main chain

Poly(carbonates), poly(thiocarbonates) and poly(esteres) containing silicon and/or germanium in the main chain were obtained under phase transfer conditions. Polymers were synthesized in a biphasic system NaOH/CH₂Cl₂ at 20°C using several phase transfer catalysts, and characterized by IR and ¹H and ¹³C NMR. The results were evaluated by the yields and the inherent viscosity values. The process was effective observing an increase of both parameters in comparison with the essays without catalyst. The increases depended of the nature of the polymer and the catalyst. In poly(ester) synthesis there was an increase of these parameters when the NaOH concentration was increased due to a salting out effect of the diphenolate from the aqueous phase to the organic one. Also poly(amides) containing silicon or germanium were synthesized by solution polymerization.     

Preparation and characterization of cyclic poly(oxypropylene)

Poly(propylene glycol) [α-hydro-ω-hydroxypoly(oxypropylene)] of number-average molar mass M̄_n ≈ 2000 g · mol⁻¹ (PPG2000) was cyclised with high conversion (ca. 75%) by reaction with dichloromethane in the presence of powdered KOH. The cyclic product was separated from chain extended polymer by preparative GPC, giving an overall yield of polymer (M̄_n ≈ 2000 g · mol⁻¹, narrow molar mass distribution) in excess of 50%. Characterisation by analytical GPC and ¹³C NMR spectroscopy confirmed cyclisation. DEPT and ¹H-coupled NMR spectra were used to show that the links in cyclic poly(oxypropylene) were 77% single acetal, 12% double acetal and 11% triple acetal (or higher). This complexity probably results from competitive reaction with water introduced with KOH.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

一种含噁二唑基甲壳型聚合物的合成与表征

电荷传输材料(空穴或电子传输)广泛应用于电致发光、有机光电池、非线性光学等领域．有机电荷传输材料可分为有机小分子和聚合物两类．有机小分子构建传输层时存在(1)与成膜性聚合物的相容性;(2)容易出现析出、结晶或团聚;(3)热稳定性差及机械强度欠佳．克服这些不足的途径之一是制备有电荷传输性能的聚合物,这种聚合物可以通过在主链或侧链接入含有电荷传输功     

Preparation and properties of alkylated poly(styrene-graft-ethylene oxide)

Poly(styrene-graft-ethylene oxide), having alkyl chains (C₁₂ or C₁₈) on the polystyrene main chain or on the poly(ethylene oxide) (PEO) side chains, were synthesized. The main chain was alkylated by first ionizing amide groups in a styrene/acrylamide copolymer with tert-butoxide, and then using the amide anions as sites for reactions with 1-bromoalkanes. An excess of amide anions was used in the reaction, and the remaining anions were subsequently utilized as initiator sites for the anionic polymerization of ethylene oxide (EO). Synthesis of poly(styrene-graft-ethylene oxide) with alkylated side chains was accomplished by polymerization of EO onto the ionized styrene/acrylamide copolymer, followed by an alkylation of the terminal alkoxide anions with 1-bromoalkanes. The alkylated graft copolymers were structurally characterized by using elemental analysis, ¹H NMR, GPC, and IR spectroscopy. DSC analysis showed that only graft copolymers with PEO contents exceeding about 50 wt % and side chain crystallinities comparable to those of homo-PEO. Main chain alkylated graft copolymers generally had higher crystalinities, as compared to nonalkylated and side chain alkylated samples. The graft copolymers absorbed water corresponding to one water molecule per EO unit at low PEO contents. The water absorption increased progressively at PEO contents above 30 wt % for main chain alkylated samples and above 50 wt % for non-alkylated samples. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of azo–bisbenzylidene‐based polymers for second order nonlinear optics

Main chain polymers containing azo and bisbenzylidene moiety were synthesized by polycondensation method. The successful polymerization reaction was characterized by UV–vis absorption, FT‐IR and NMR spectroscopy. The resulting polymers were soluble in polar solvents like dimethyl formamide (DMF) and showed good thermal stability up to 250 °C. These polymers were blended with poly methyl methacrylate (PMMA) and corona poled for characterizing second harmonic generation (SHG) property. Temperature stability study of SHG intensity of poled polymer showed that it is stable up to 80 °C. To improve temperature stability further the crosslinking of polymer under UV light is proposed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4317–4324     

Synthesis of poly(spiropyran)s by polycondensation and their photoisomerization behaviors

Poly(spiropyran)s were synthesized by polycondensation of a bis(indoline) monomer with bis(o-positioned formyl and hydroxy)-substituted aromatic monomers in alcoholic solvents. The structures of the products and their molecular weights were determined by the ¹H NMR and GPC measurements, respectively. Furthermore, photoisomerization behaviors of the poly(spiropyran)s were analyzed by the UV–Vis and ¹H NMR measurements of their solutions in dichloromethane upon the UV and visible light irradiations.     

Poly(β-Amino acids). VI. Synthesis and conformational properties of poly[(r)-3-pyrrolidinecarboxylic acid]

Racemic and optically active 3-pyrrolidinecarboxylic acids (β-proline) were synthesized, and their polymers, poly[(RS)-β-proline] and poly[(R)-β-proline], were prepared by the polycondensation reaction of the p-nitrophenyl esters. Model compounds, N-cyclopentylcarboxylic acid pyrrolidide and N-cyclopentylcarbonyl-(R)-3-pyrrolidinecarboxylic acid pyrrolidide, were synthesized to elucidate the conformation of the polymer. The solution properties of poly[(R)-β-proline] and the model compounds were investigated by means of circular dichroism (CD) and NMR spectroscopy. The spectral patterns of the polymer and model compounds were similar in various solvents. Poly[(R)-β-proline] and poly[(RS)-β-proline] showed identical NMR spectra. These results suggest that poly[(R)-β-proline] may exist in a random conformation consisting of mixtures of cis and trans amide bonds. The conformational study of cyclopentanecarboxylic acid pyrrolidide by NMR spectroscopy with a shift reagent, Eu(fod)₃, in CDCl₃ implied that the plane containing the amide group bisects the cyclopentane ring. This suggests that each amide plane in the polymer in chloroform may also bisect the pyrrolidine ring.     

Synthesis,Characterization and Photocrosslinking Properties of Poly(1‐(4‐Methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one)

The phenylmethacrylamide monomer, 1‐(4‐methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one (MPNP) containing a photosensitive group was synthesized by reacting 4‐nitrocinnamoylaniline with methacryloyl chloride in the presence of triethylamine at 0–5°C. The functional monomer, MPNP was polymerized in ethyl methyl ketone (EMK) under nitrogen atmosphere at 70°C using benzoyl peroxide (BPO) as the initiator. The synthesized polymer was characterized by UV, IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by radical recombination than disproportionation. The thermal studies of the polymer were obtained from thermogravimetric analysis. The glass transition temperature of the polymer was determined by differential scanning calorimetry. The solubility of the polymer was tested in various organic solvents at room temperature. The photosensitivity of the polymer was investigated in various solvents in the presence and absence of triplet photosensitizers. The effect of the different solvents nature and concentration on the rate of photocrosslinking of the polymer were also examined for using the polymer as negative photoresist materials.     

Synthesis of a novel water-soluble polymeric UV-absorber for cotton

A water-soluble polymeric UV-absorber with polyvinylamine as backbone and benzotriazole type UV absorber as anti-UV functional group was synthesized by grafting brominated(2’-acetoxy-5’-methylphenyl)-2H-benzotriazole onto polyvinylamine. The intermediates and synthesized polymeric UV absorber were characterized by ~1H NMR,MS,IR and UV spectroscopy.The finishing properties of the polymeric UV absorber on cotton were investigated to show good UV protection property and wash fastness.     

Synthesis and properties of comb polymers with semirigid mesogen‐jacketed polymers as side chains

A series of novel comb polymers, poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}‐g‐polystyrene (PMPCS‐g‐PS), with mesogen‐jacketed rigid side chains were synthesized by the “grafting onto” method from α‐yne‐terminated PMPCS (side chain) and poly(vinylbenzyl azide) (backbone) by Cu(I)‐catalyzed 1,3‐dipolar cycloaddition click reaction. The α‐yne‐terminated PMPCS was synthesized by Cu(I)‐catalyzed atom transfer radical polymerization initiated by a yne‐functional initiator. Poly(vinylbenzyl azide) was prepared by polymerizing vinylbenzyl chloride using nitroxide mediated radical polymerization to obtain poly(vinylbenzyl chloride) as the precursor which was then converted to the azide derivative. The chemical structure and architectures of PMPCS comb polymers were confirmed by ¹H NMR, gel permeation chromatography, and multiangle laser light scattering. Both surface morphologies and solution behaviors were investigated. Surface morphologies of PMPCS combs on different surfaces were investigated by scanning probe microscopy. PMPCS combs showed different aggregation morphologies when depositing on silicon wafers with/without chemical modification. The PMPCS comb polymers transferred to polymer‐modified silicon wafers using the Langmuir‐Blodgett technique showed a worm‐like chain conformation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and the investigation of its electrochemical and photoluminescent characteristics of organic-inorganic hybrid multilayers containing europium-substituted heteropolytungstate

Photoluminescent multilayers were fabricated by layer-by-layer deposition between europium-substituted heteropolytungstate K₁₃[Eu(SiW₁₁O₃₉)₂]·28H₂O (denoted ESW) and a cationic polymer of quaternized poly(4-vinylpyridine) partially complexed with osmium bis(2,2′-bipyridine) (denoted as QPVP-Os) on glassy carbon and quartz substrates. The resulting photoluminescent organic-inorganic hybrid multilayers were characterized by electrochemical impedance spectroscopy, UV-Vis absorption spectrometry, cyclic voltammetry and photoluminescence spectra. Electrochemical impedance spectroscopy, UV-Vis absorption spectrometry and cyclic voltammetry results demonstrated that the multilayers were regular growth each layer adsorption. The photoluminescent properties of the films at room temperature were investigated to show the characteristic Eu³⁺ emission pattern of ⁵D₀→⁷F_j.