The effect of molecular weight of polymer matrix on properties of polymer-dispersed liquid crystals

The electro-optical properties and memory effects are important characters of polymer-dispersed liquid crystal (PDLC) devices. Molecular weight of polymer matrix influences the morphology of liquid crystal droplets in PDLC film and the performance of PDLC devices. In this letter, PDLC films were doped with a small amount of chain transfer agent (CTA), in order to control the molecular weight of polymer matrix. It is observed that the addition of CTA induces a reduction of threshold voltage. In addition, the effect of molecular weight on memory effects of PDLC devices was also discussed. It is found that the entanglement between polymer and liquid crystal molecule increased with the molecular weight, which reduces the memory effect.     

Sieving polymer synthesis by reversible addition fragmentation chain transfer polymerization

Replaceable sieving polymers are the fundamental component for high‐resolution nucleic acids separation in CE. The choice of polymer and its physical properties play significant roles in influencing separation performance. Recently, reversible addition fragmentation chain transfer (RAFT) polymerization has been shown to be a versatile polymerization technique capable of yielding well‐defined polymers previously unattainable by conventional free‐radical polymerization. In this study, a high molecular weight poly‐(N,N‐dimethylacrylamide) (PDMA) at 765 000 gmol^?1 with a polydispersity index of 1.55 was successfully synthesized with the use of chain transfer agent—2‐propionic acidyl butyl trithiocarbonate in a multistep sequential RAFT polymerization approach. This study represents the first demonstration of RAFT polymerization for synthesizing polymers with the molecular weight range suitable for high‐resolution DNA separation in sieving electrophoresis. Adjustment of pH in the reaction was found to be crucial for the successful RAFT polymerization of high molecular weight polymer as the buffered condition minimizes the effect of hydrolysis and aminolysis commonly associated with trithiocarbonate chain transfer agents. The separation efficiency of 2‐propionic acidyl butyl trithiocarbonate PDMA was found to have marginally superior separation performance compared to a commercial PDMA formulation, POP?‐CAP, of similar molecular weight range.     

Isoprene polymerization via reversible addition fragmentation chain transfer polymerization

Until recently, the primary living radical polymerization method available for preparing polyisoprene was nitroxide‐mediated radical polymerization, with reversible addition‐fragmentation chain transfer polymerization being applied only in a few cases within the last couple of years. We report here the preparation of polyisoprene by RAFT in the presence of the trithiocarbonate transfer agent S‐1‐dodecyl‐S′‐(r,r′‐dimethyl‐r′′‐acetic acid)trithiocarbonate and t‐butyl peroxide as the radical initiator. The kinetics of this polymerization at an optimized temperature of 125 °C and radical initiator concentration of 0.2 equiv relative to transfer agent have been studied in triplicate and demonstrate the living nature of the polymerization. These conditions resulted in polymers with narrow polydispersity indices, on the order of 1.2, with monomer conversions up to 30%. Retention of chain‐end functionality was demonstrated by polymerizing styrene as a second block from a polyisoprene macrotransfer agent, resulting in a block copolymer presenting a unimodal gel permeation chromatogram, and narrow molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4100–4108, 2007     

The future of reversible addition fragmentation chain transfer polymerization

We examine the reversible addition fragmentation chain transfer (RAFT) process with regard to its potential and limits in future industrial applications (including those conducted on a larger scale) as well as materials science. The outlook for the RAFT process is bright: Its unrivaled inherent process simplicity coupled with a wide tolerance to monomer classes and functionalities makes it a prime candidate for the use in large reactors. At the same time, it allows for ready access to complex macromolecular architectures of variable shape and size. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5715–5723, 2008     

Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

Modification of electro-optical properties of polymer dispersed liquid crystal films by iniferter polymerization

In this letter, iniferter polymerization was employed to prepare polymer dispersed liquid crystal (PDLC) films. Polystyrene (PS) was prepared as a macro-iniferter (MI). With the addition of MI in PDLC films, poly(methyl acrylate)-b-polystyrene was prepared in situ and used as polymer matrix in photopolymerization induced phase separation (PIPS). A reduction in driving voltages and an improvement in the ON state transmittance were observed for the sample prepared with a small amount of MI; while a poor electro-optical performance was obtained for that without any MI. Moreover, molecular weight and refractive index of the polymer matrix could be easily adjusted by the concentration of MI, and the matrix seems to be a prospective material for the PDLC devices.     

Synthetic and characterization aspects of dimethylaminoethyl methacrylate reversible addition fragmentation chain transfer (RAFT) polymerization

2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) mediated RAFT polymerization of dimethylaminoethyl methacrylate (DMAEMA) was carried out in dioxane at 90 °C. The influence of several parameters, such as the monomer to CPDB molar ratio (100 to 500), the monomer concentration (2 mol·L^?1 to 5.9 mol·L^?1), and CPDB to initiator molar ratio (1 to 10), was evaluated with regards to conversion and polymerization duration, as well as control of molar mass and molar mass distributions. Number average molar masses from 10,000 to 70,000 g·mol^?1 can be targeted. The determination of the molar masses has been carried out by size exclusion chromatography (SEC) with a refractometer detector with poly(methyl methacrylate) (PMMA) standards. The experimental values were lower than the expected ones. Then, SEC in aqueous medium with an online laser light scattering detector was used both to get absolute molar masses and to recalibrate the SEC column in THF. Characterization of well‐controlled PDMAEMA samples has been performed by proton NMR spectroscopy and matrix assisted laser desorption ionization time of flight mass spectrometry. Finally, a chain extension experiment was evaluated with regard to living features. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3551–3565, 2005     

Functionalization and patterning of reactive polymer brushes based on surface reversible addition and fragmentation chain transfer polymerization

We present the synthesis of reactive polymer brushes prepared by surface reversible addition–fragmentation chain transfer polymerization of pentafluorophenyl acrylate. The reactive ester moieties can be used to functionalize the polymer brush film with virtually any functionality by simple post‐polymerization modification with amines. Dithiobenzoic acid benzyl‐(4‐ethyltrimethoxylsilyl) ester was used as the surface chain transfer agent (S‐CTA) and the anchoring group onto the silicon substrates. Reactive polymer brushes with adjustable molecular weight, high grafting density, and conformal coverage through the grafting‐from approach were obtained. Subsequently, the reactive polymer brushes were converted with amino‐spiropyrans resulting in reversible light‐responsive polymer brush films. The wetting behavior could be altered by irradiation with ultraviolet (UV) or visible light. Furthermore, a patterned surface of polymer brushes was obtained using a lithography technique. UV irradiation of the S‐CTA‐modified substrates leads to a selective degradation of S‐CTA in the exposed areas and gives patterned activated polymer brushes after a subsequent RAFT polymerization step. Conversion of the patterned polymer brushes with 5‐((2‐aminoethyl)amino)naphthalene‐1‐sulfonic acid resulted in patterned fluorescent polymer brush films. The utilization of reactive polymer brushes offers an easy approach in the fabrication of highly functional brushes, even for functionalities whose introduction is limited by other strategies. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of a novel quercetin magnetic molecularly imprinted polymer via reversible addition fragmentation chain transfer strategy

Molecularly imprinted polymer (MIP) will be modified on the surface of the core-shell structure silica magnetic nanoparticles, during which quercetin is used as a template molecule, acrylamide as a functional monomer, azo-bisisobutyronitrile as an initiator and ethylene glycol dimethacrylate as a cross-linker, to synthesize highly efficient and selective quercetin magnetic molecularly imprinted nanoparticles via Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization. FT-IR and X-ray diffraction (XRD) patterns are used to monitor the reaction and show the characteristic groups of each reaction step. Compared with the conventional bulk polymerization (2.7029 mg/g), the adsorption test showed that the MMIP by RAFT activity controlled polymerization had better absorption capacity for quercetin which the saturated adsorption amount was 4.8471 mg/g. Kinetic studies indicate that pseudo first order model is suitable to describe the adsorption mechanism. Thermodynamics experiment revealed that Langmuir model was more applied for explains the adsorption of quercetin onto magnetic molecularly imprinted polymer.     

Kinetic model of reversible addition fragmentation chain transfer polymerization of styrene in seeded emulsion

A detailed model describing the kinetics of living polymerization mediated by reversible addition‐fragmentation chain transfer (RAFT) in seeded emulsion polymerization is developed. The model consists of a set of population balance equations of the different radical species in the aqueous phase and in the particle phase (accounting for radical segregation) as well as for the dormant species in the particle phase. The entire population of radicals was divided into several distinguished species, based on their length and their chain end group. The model results are helpful in understanding inhibition and retardation phenomena that are typical for RAFT emulsion polymerizations. While inhibition is due to the radical loss in form of the RAFT leaving group, retardation is mostly caused by a small amount of short dormant chains in the particle phase, leading to a slight increase of radical loss via RAFT exchange with radicals entering a particle. The model results are compared to a series of experiments, using cumyl dithiobenzoate as a RAFT agent in polymerizations of styrene. The agreement between experimental and model results is good and, notably, the only parameters considered adjustable were the RAFT exchange rate coefficients. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6114–6135, 2006     

Synthesis and characterization of surface‐initiated polymer brushes on silicon substrates by reversible addition fragmentation chain transfer polymerization

Polymer brushes were prepared by using the reversible addition fragmentation chain transfer (RAFT) technique. The silicon substrates (Si (111) surface) were modified with ethyl xanthate groups which were introduced by the treatment of Si (111) surface with sodium ethyl xanthate. The polymer brushes were then prepared under RAFT conditions from the Si (111) wafer. Its “living” characteristics were determined by a series of characterizations including gel permeation chromatography (GPC), ellipsometry, and contact angle measurements. The results showed a well‐defined graft layer consisting of polymer brushes with low‐polydispersity could be prepared directly on Si (111)‐X surface (where X represents an ethyl xanthate groups). The structure of the polymer brushes was characterized and confirmed with the surface sensitive techniques such as X‐ray photoelectron spectroscopy (XPS) and scanning probe microscopy (SPM). Copyright © 2007 John Wiley & Sons, Ltd.     

Simultaneous reversible addition fragmentation chain transfer and ring‐opening polymerization

The simultaneous ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) and 2‐hydroxyethyl methacrylate (HEMA) polymerization via reversible addition fragmentation chain transfer (RAFT) chemistry and the possible access to graft copolymers with degradable and nondegradable segments is investigated. HEMA and ε‐CL are reacted in the presence of cyanoisopropyl dithiobenzoate (CPDB) and tin(II) 2‐ethylhexanoate (Sn(Oct)₂) under typical ROP conditions (T > 100 °C) using toluene as the solvent in order to lead to the graft copolymer PHEMA‐g‐PCL. Graft copolymer formation is evidenced by a combination of size‐exclusion chromatography (SEC) and NMR analyses as well as confirmed by the hydrolysis of the PCL segments of the copolymer. With targeted copolymers containing at least 10% weight of PHEMA and relatively small PHEMA backbones (ca. 5,000–10,000 g mol^?1) the copolymer grafting density is higher than 90%. The ratio of free HEMA‐PCL homopolymer produced during the “one‐step” process was found to depend on the HEMA concentration, as well as the half‐life time of the radical initiator used. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3058–3067, 2008     

Dendrimer‐star polymer and block copolymer prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization with dendritic chain transfer agent

A new reversible addition‐fragmentation chain transfer (RAFT) agent, dendritic polyester with 16 dithiobenzoate terminal groups, was prepared and used in the RAFT polymerization of styrene (St) to produce star polystyrene (PSt) with a dendrimer core. It was found that this polymerization was of living characters, the molecular weight of the dendrimer‐star polymers could be controlled and the polydispersities were narrow. The dendrimer‐star block copolymers of St and methyl acrylate (MA) were also prepared by the successive RAFT polymerization using the dendrimer‐star PSt as macro chain transfer agent. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6379–6393, 2005     

Reverse-mode polymer dispersed liquid crystal films prepared by patterned polymer walls

This article proposes a methodology to prepare polymer dispersed liquid crystal (PDLC) films working in the reverse-mode operation, where the ion-doped nematic liquid crystals (NLCs) with negative dielectric anisotropy (Δε) were locked by polymer walls. On-state and off-state of films were controlled by an electric field. In the absence of an electric field, it appears to be transparent. In the field, the homogeneous alignment NLCs form dynamic scattering, giving rise to opaque. The effect of the cylindrical holes with different diameters of photo masks and liquid crystal Δε on the electro-optical properties and transmittance wavelength range of 400–3000 nm light of samples were investigated. It was found that it exhibited very good electro-optical characteristics, high contrast ratio and excellent infrared energy-efficient of films used as switchable windows.     

The effect of the resultant microphase-separated structures of polymer matrices on the electro-optical properties of polymer dispersed liquid crystal films by Iniferter polymerization

Iniferter polymerization was employed to prepare polymer dispersed liquid crystal (PDLC) films and an additional photoinitiator was introduced to induce the phase separation of polymer matrices themselves on the process of preparing the PDLC. The effect of the polymerization kinetics and the resultant microphase-separated structures of polymer matrices on the electro-optical properties of PDLC films were studied. It was found that the bigger length scale of phase separation of polymer matrices induced strong light-scattering resulting in low ON-state transmittance. And faster polymerization kinetic induced higher threshold and saturation voltages.