Novel cyclopenta[def]phenanthrene based blue emitting oligomers for OLEDs

Novel blue emitters, oligo-MCPPs (tri-MCPP, tetra-MCPP, and penta-MCPP), have been synthesized and characterized. The introduction of cyclopenta[def]phenanthrene (CPP) units into the structure of oligo-MCPPs gave LEDs with high efficiency and pure blue emission. UV-visible absorption spectra of the thin films of these compounds appear at 333-354 nm, and their maximum PL emission at 416-447 nm. Multilayer organic EL devices with oligo-MCPPs as an emitting layer showed the turn-on voltage of about 4.8 V, the maximum brightness of 1076 cd/m² (at 8.2 V), the maximum luminescence efficiency of 0.81 cd/A, and the CIE coordinates of (0.17, 0.14) with blue color.     

Synthesis and characterization of poly(1,4-phenylenevinylene-alt-2,5-thienylenevinylene) derivatives for organic light-emitting diodes

A new series of alternating copolymers composed of 1,4-phenylenevinylene and 2,5-thienylenylvinylene repeating units with various side chain substituents were synthesized via the Heck coupling reaction for use in light-emitting diodes (LEDs). The resulting copolymers were characterized using ¹H- and ¹³C-NMR, DSC, and TGA. These polymers were found to be soluble in common organic solvents and are easily spin-coated onto glass substrates, producing high optical quality thin films without defects. The electro-optical properties of ITO/PEDOT/Polymer/Al devices were investigated using UV-VIS, PL and EL spectroscopy. The turn-on voltages of these devices were found to be in the range 4-16 V, with a maximum brightness of about 2900 cd/m² at 12 V.     

Novel orange-red light-emitting polymers with cyclometaled iridium complex grafted in alkyl chain

Novel poly(fluorene-alt-carbazole) (PFCz) based copolymers with 3,6-carbazole-N-alkyl grafted iridium complex using 2,3-diphenylpyrazine as ligand (IrBpz) were synthesized by Suzuki polycondensation. The emission of host polymer, PFCz, was completely quenched when the copolymer with 1 mol% of iridium complex. An orange-red emission with CIE coordinate of (0.56, 0.42) was observed from Phosphorescent polymer light-emitting diodes (PhPLEDs). The PhPLEDs made by this copolymer-iridium complex showed a maximum luminous efficiency (LE) of 5.58 cd/A and a maximal luminance of 8625 cd/m². White light with CIE coordinate of (0.33, 0.27) was observed from white PhPLEDs (WPhPLEDs) made by the copolymer containing 0.4 mol% iridium complex. A LE of 2.30 cd/A with luminance of 2068 cd/m² was observed from WPhPLEDs.     

Synthesis and electroluminescence properties of carbazole-containing 2,6-naphthalene-based conjugated polymers

Three types of carbazole containing 1,5-disubstituted poly(2,6-naphthalene) derivatives, i.e., 2,6-naphthalene homopolymer that has a carbazolyl side chain at 1,5-positions, random copolymers and alternating copolymers consisting of 1,5-dialkoxynaphthalene-2,6-diyl and N-phenylcarbazole-2,7-diyl were newly synthesized by Ni-mediated Yamamoto polycondensation and Pd-catalyzed Suzuki coupling reaction. The number-average molecular weights (M_n) of the polymers and their polydispersity indices (M_w/M_n) were 5.4-8.2 × 10³ and 1.4-1.7, respectively. These polymers exhibited blue photoluminescence in the film states and high fluorescence quantum efficiencies in CHCl₃ (?_fl = 0.70-1.00). The electroluminescence properties of these polymers were investigated by fabricating a PLED device that has a configuration of ITO/PEDOT(PSS)/polymer/CsF/Al. The device fabricated with the random copolymer exhibited highest performances showing a maximum brightness of 8370 cd/m² at 13 V and a maximum efficiency of 2.16 cd/A at 7 V.     

Synthesis, photophysics and electroluminescence of new vinylene-copolymers with 2,4,6-triphenylpyridine kinked segments along the main chain

Two new vinylene alternating copolymers F and C that contained 2,4,6-triphenylpyridine as a common moiety and fluorene or carbazole, respectively, as an alternating moiety were prepared by Heck coupling. They showed an outstanding thermal stability being stable up to approximately 350 °C and had relatively high glass transition temperatures (140 and 111 °C). The existence of the 2,4,6-triphenylpyridine kinked units along the polymer backbone caused a partial interruption of the π-conjugation. The copolymers emitted blue-green light with emission maximum at 446-464 nm and quantum yields of 0.52 and 0.28 in THF solution. The electrochemical properties of copolymers F and C, including HOMO and LUMO levels, were estimated from their cyclic voltammograms. Their electroluminescence (EL) emission maxima (greater than 500 nm) showed significant red-shifts relative to the PL maxima, which has been explained by the direct cross recombination transition between electrons and holes trapped on carbazole or triphenylpyridine subunits. Moreover, the emission colors transform gradually with increasing bias and approach to white color at about 30 ∼ 35 V. The maximal luminance (maximal luminance efficiency) of the EL devices (ITO/PEDOT:PSS/F or C/Ca/Al) were 647 cd/m² (0.13 cd/A) or 615 cd/m² (0.10 cd/A), respectively.     

Synthesis and characterization of cyclometalated iridium(III) complexes containing pyrimidine-based ligands

New pyrimidine derivatives (pyr) have been synthesized using palladium-catalyzed Suzuki coupling reaction. These compounds can undergo cyclometalation with iridium trichloride to form bis-cyclometalated iridium complexes, (pyr)₂Ir(acac) (acac = acetylacetonate; pyr = cyclometalated pyr). The substituents at the both cyclometalated phenyl ring and pyrimidine ring were found to affect both electrochemical and photophysical properties of the complexes. Computation results on these complexes are consistent with the electrochemical and photophysical data. The complexes are green-emitting with good solution quantum yields at ∼0.30. Light-emitting devices using these complexes as dopants were fabricated, and the device performance at 100 mA/cm² are moderate: 9 (17 481 cd/m², 4.8%, 18 cd/A, 5.1 lm/W); 10 (18 704 cd/m², 4.9%, 18.9 cd/A, 4.7 lm/W); 13 (20 942 cd/m², 5.4%, 21.0 cd/A, 6.1 lm/W).     

Vinyl copolymers containing pendant 1,4‐distyrylbenzene and 1,3,4‐oxadiazole chromophores: Preparation and optoelectronic properties

We prepared two vinyl copolymers P1 and P2 containing pendant distyrylbenzene and aromatic 1,3,4‐oxadiazole derivatives, respectively, from their precursor poly(styrene‐ran‐4‐vinylbenzyl chloride) (M_w = 11,400, PDI = 1.18), which had been prepared by the controlled radical polymerization (RAFT). Two main chain polymers containing similar isolated distyrylbenzene ( P3) and aromatic 1,3,4‐oxadiazole ( P4 ) chromophores were also synthesized for comparative study. The resulted copolymers ( P1 – P4 ) are soluble in common organic solvents and are basically amorphous materials with 5% weight‐loss temperature higher than 360 °C. The PL spectral results reveal that the architecture of P1 prevents the formation of inter‐ or intramolecular interaction. The HOMO and LUMO levels of P2 , estimated from cyclic voltammetric data, are ?5.96 and ?3.81 eV, respectively, which are much lower than those of P1 (?5.12 and ?3.11 eV). The emission of blend from P1 and P2 are contributed mainly from distyrylbenzene fluorophore (～450 nm) owing to efficient energy transfer. Moreover, the blend exhibits three kinds of redox behavior depending on their weight ratios. The luminance and current efficiency of the EL device lpar;ITO/PEDOT/ MEH ‐ PPV + P2 /Al) are 503 cd/m² and 0.11 cd/A, which can be improved to 1285 cd/m² and 0.44 cd/A, respectively, as the weight ratio of P2 increases from 0 to 20%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5362–5377, 2006     

Two novel triphenylamine-substituted poly(p-phenylenevinylene) derivatives: synthesis, photo- and electroluminescent properties

Two novel triphenylamine-substituted poly(p-phenylenevinylene) derivatives, P1 and P2, have been successfully synthesized through the Witting-Horner reaction. The structures and properties of the monomers and the resulting polymers were characterized by using ¹H NMR, FT-IR, GPC, TGA, UV-vis absorption spectroscopy, cyclic voltammetry (CV) and electroluminescence (EL) spectroscopy. The obtained polymers exhibited good thermal stability and high photoluminescence quantum yield (0.42-0.90). The polymer light-emitting diodes (PLEDs) with the configuration of ITO/PEDOT/polymers/Ca/Al were fabricated. The single-layer device based on P1 and P2 emitted stable blue and yellow light with the turn-on voltage of 4 and 6 V, respectively. The maximum luminance of 3003 cd/m² at 10 V was obtained for device P2.     

One-pot, novel chemical modification of glycidyl methacrylate copolymers with very bulky organosilicon side chain substituents

Glycidyl methacrylate (GM) random copolymers with styrene and methylstyrene (in a 1:1 and 1:3 mole ratio) were synthesized by solution free radical polymerizations at 70 ± 1 °C using α,α′-azoisobutyronitrile as an initiator. The copolymer compositions were obtained using related ¹H NMR spectra and the polydispersity indices of the copolymers determined using gel permeation chromatography (GPC). Both types of polymer could be modified by incorporation of the highly sterically demanding tris(trimethylsilyl)methyl substituent (Me₃Si)₃C-(Tsi = trisyl) through the ring opening reaction of the epoxy groups in copolymers. Chemical modification was determined by ¹H NMR and infrared spectroscopies. The glass transition temperature T_g of all copolymers was determined by differential scanning calorimetry (DSC). The T_g value of the copolymers containing bulky trisyl groups was found to increase with incorporation of trisyl groups in polymer structures. The presence of trisyl groups in the polymer side chain created new macromolecules with novel modified properties and potential use as membranes for fluid separation.     

H NMR and IR study of temperature-induced phase transition of negatively charged poly(N-isopropylmethacrylamide-co-sodium methacrylate) copolymers in aqueous solutions

¹H NMR and IR spectroscopies were used to investigate the temperature-induced phase transition behaviour of poly(N-isopropylmethacrylamide-co-sodium methacrylate) [P(IPMAAm/MNa)] copolymers, containing in aqueous solutions negatively charged MNa units (i = 1-10 mol%), and the obtained results were compared with those obtained for poly(N-isopropylmethacrylamide) (PIPMAAm) homopolymer. For PIPMAAm/H₂O solution, IR spectra indicate that the transition temperatures for the hydrophilic CO groups are slightly higher (by ∼ 2 K) in comparison with hydrophobic CH₃ groups. The decreasing values of phase-separated fraction p_max and the decrescent hysteresis during gradual heating and cooling, both with increasing content of MNa units i in the copolymer, show that for copolymers with i ? 5 mol% the globular-like structures formed at temperatures above the respective LCST are rather porous and disordered with relatively low degree of polymer-polymer hydrogen bonding. While for P(IPMAAm/MNa) copolymers with i ? 5 mol% most water molecules are expelled from globular structures, for i < 5 mol% a certain portion of water (HDO) molecules is rather tightly bound in globular structures; at the same time no releasing process was detected for the bound water even for 90 h.     

Thermotropic polyesters. 2: Synthesis, characterization and thermal transitions of copolyesters containing 4,4′-bis (ω-alkyloxy) biphenyl isophthalate units

Thermotropic copolyesters containing an isophthalate unit and mesogenic 4, 4′-bis (ω-hydroxyalkyloxy) biphenyls (n = 3, 4, 6) with different numbers of methylene units have been synthesized by melt polymerization. The number-average molar mass (M_n) was estimated from end group analysis by ¹H NMR. The copolymer compositions were also obtained from ¹H NMR. The thermal behavior of the copolymers containing even-even (n = 4, 6) and odd-even (n = 3, 4) pairings has been investigated and is also compared with that of the analogous homopolymers. The copolymers exhibit reduced melting point and extending liquid crystalline range identified using polarizing microscopy and DSC. All of the obtained compounds were characterized by conventional spectroscopic methods.     

Surface structure of thin asymmetric PS-b-PMMA diblock copolymers investigated by atomic force microscopy

Asymmetric poly(styrene-b-methyl methacrylate) (PS-b-PMMA) diblock copolymers of molecular weight M_n = 29,700 g mol⁻¹ (M_PS = 9300 g mol⁻¹M_PMMA = 20,100 g mol⁻¹, PD = 1.15, χ_PS = 0.323, χ_PMMA = 0.677) and M_n = 63,900 g mol⁻¹ (M_PS = 50,500 g mol⁻¹, M_PMMA = 13,400 g mol⁻¹, PD = 1.18, χ_PS = 0.790, χ_PMMA = 0.210) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Atomic force microscopy (AFM) was used to investigate the surface structure of thin films, prepared by spin-coating the diblock copolymers on a silicon substrate. We show that the nanostructure of the diblock copolymer depends on the molecular weight and volume fraction of the diblock copolymers. We observed a perpendicular lamellar structure for the high molar mass sample and a hexagonal-packed cylindrical patterning for the lower molar mass one. Small-angle X-ray scattering investigation of these samples without annealing did not reveal any ordered structure. Annealing of PS-b-PMMA samples at 160 °C for 24 h led to a change in surface structure.     

Synthesis, characterization and photophysics of fluorene-alt-oxadiazole copolymers containing pendent iridium (III) complex moiety

A series of fluorene-alt-oxadiazole copolymers containing a pendent phosphor chromophore of the (piq)₂Ir(pic) complex were synthesized via the palladium-catalyzed Suzuki coupling reaction, where piq is 1-phenylisoquinoline and pic is picolinic acid. These copolymers exhibited a similar absorption spectrum with a peak at about 330 nm and a typical emission peak at 408 nm in CH₂Cl₂ from the fluorene-alt-oxadiazole backbone. However, a significantly red-shifted emission peak at about 625 nm was observed in the neat films of these copolymers, which are attributed to the pendent iridium (III) complex unit. Using these copolymers as single emission layer, the polymer light-emitting devices with a configuration of ITO/PEDOT:PSS/copolymers/LiF/Al exhibited a saturated red emission with a peak at 632 nm. Significant influence of the attached iridium (III) complex ratio on EL performance was presented. A maximum current efficiency of 1.2 cd/A at 63 mA/cm² and a maximum luminance of 1125 cd/m² at 12 V were achieved from the device with the copolymer containing iridium (III) complex in a 3% molar ratio.     

Synthesis and phase separation of amine-functional temperature responsive copolymers based on poly(N-isopropylacrylamide)

Free radical copolymerizations of N-isopropyl acrylamide (NIPAM) and cationic N-(3-aminopropyl) methacrylamide hydrochloride (APMH) were investigated to prepare amine-functional temperature responsive copolymers. The reactivity ratios for NIPAM and APMH were evaluated in media of different ionic strength (r_NIPAM = 0.7 and r_APMH = 0.7-1.2). Phase separation behavior of the random copolymers with only 5 mol% of the APMH was found to be suppressed in pure water at temperatures up to 45 °C due to electrostatic repulsion among the cationic amine groups randomly distributed along the copolymer chain. Alternate sequential addition of PNIPAM/APMH mixtures and pure NIPAM was used to provide increased control of the location of APMH units along the chain. Consequently (close to) homo-PNIPAM block(s) were formed as evidenced by its characteristic phase transition at 33 °C. The influences of the monomer feeding time and feeding interval time to the APMH distribution were investigated to prepare copolymers with thermo-induced phase separation under physiologically relevant temperature and to determine the extent of conjugation to poly(ethylene oxide).     

Synthesis and photovoltaic properties of fluorene-based copolymers with narrow band-gap units on the side chain

A series of novel polyfluorene copolymers are developed by covalently attaching narrow band gap aryl-heterocycle units of Th-BT-TPA to the side chain of polyfluorene with an alkyl phenyl spacer through Pd-catalyzed Suzuki coupling reactions. The resulting copolymers are soluble in common organic solvents. The electrochemical, optical, and photovoltaic properties of the copolymers are studied. Electrochemical and optical analysis reveal that these polymers exhibit relatively low band gaps from 1.95 to 2.00 eV and exhibit strong absorption in the 300-620 nm region. BHJ solar cells blending copolymers PF-MR15-DBT35 with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) (1:1 weight ratio) as the active layer present a high open-circuit voltage (V_oc∼1.0 V) and a power conversion efficiency of 0.7% under simulated solar light AM1.5G (80 mW/cm²). Further investigations of other polyfluorene copolymers with narrow band gap aryl-heterocycle units on the side chain are in progress.     

New rod-coil block copolymers consisting of terfluorene segments and electron transporting units as the flexible blocks

A series of new rod-coil block copolymers having a well-defined terfluorene unit as the rigid segment with three different electron transporting moieties as the flexible part, such as side chain oxadiazole (TFPOXD), side chain quinoline (TFPQN) and a molecule containing two oxadiazole rings in the side chain (TFPDOXD), were synthesized using the atom transfer radical polymerization (ATRP) technique. All the synthesized copolymers were extensively examined with respect to their optical properties as pristine films, upon thermal annealing (200 °C for 30 min in air) and photo-oxidation treatment in air. Thermal annealing of the block copolymers resulted in stable blue light emission from TFPOXD and TFPDOXD while TFPQN showed the appearance of the undesired 520 nm emission band. In addition, TFPOXD does not exhibit the low-energy emission band at 520 nm after photo-oxidation under prolonged diffuse UV radiation at ambient atmosphere, despite the fluorenone formation on the terfluorene segment, in contrast to all the other copolymers.     

Self‐assembly of H‐bonded side‐chain and cross‐linking copolymers containing diblock‐copolymeric donors and single/double H‐bonded light‐emitting acceptors

A series of diblock‐copolymers were synthesized through anionic polymerization of styrene and tert‐butyl methacrylate (tBuA) with different monomer ratios, and analogous block‐copolymeric derivatives (PS‐b‐PAA)s with monofunctional carboxylic acid groups were obtained by further hydrolyzation as hydrogen‐bonded (H‐bonded) proton donors. Via H‐bonded interaction, these diblock‐coplymeric donors (PS‐b‐PAA)s were incorporated with luminescent mono‐pyridyl/bis‐pyridyl acceptors to form single/double H‐bonded supramolecules, that is, H‐bonded side‐chain/cross‐linking copolymers, respectively. The supramolecular architectures formed by donor polymers and light‐emitting acceptors were influenced by the ratio of acid blocks in the diblock copolymeric donors and the type of single/double H‐bonded light‐emitting acceptors. Their thermal and luminescent properties can be adjusted by H‐bonds, and more than 100 nm of red‐shifted photoluminescence (PL) emissions were observed, which depend on the degrees of the H‐bonding interactions. Self‐assembled phenomena of amphiphilic dibolck copolymers and their H‐bonded complexes were confirmed by TEM micrographs, and supramolecular microphase separation of spherical micelle‐like morphology was demonstrated to affect the photophysical properties. Polymer light‐emitting diode (PLED) devices containing H‐bonded complexes showed electroluminescence (EL) emissions of 503–560 nm under turn‐on voltages of 7.5–9.0 V, maximum power efficiencies of 0.23–0.37 cd/A (at 100 mA/cm²), and maximum luminances of 318–519 cd/m² (around 25 V). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4685–4702, 2009     

Synthesis of poly(styrene-b-dimethylsiloxane) multi-block copolymers via polyhydrosilylation reaction

Poly(styrene-b-siloxane) multi-block copolymers have been prepared by polyhydrosilylation reaction. Four copolymers have been synthesized by the reaction of α,ω-bis silane polydimethylsiloxanes with α,ω-bis allyl polystyrene. The latter has been obtained by the reaction of carboxy-telechelic polystyrene with allyl glycidyl ether. ¹H NMR and FT-IR analyses show that the polyhydrosilylation reaction is quantitative. The copolymer molecular weights were determined by SEC to be about 25,000 g/mol. The properties of these copolymers were characterized by DSC and DMA analyses. The rubbery plateaus of these copolymers are in the range of −115 °C to 85 °C.     

DNA binding and cleavage behaviors of copper(II) complexes with amidino-O-methylurea and N-methylphenyl-amidino-O-methylurea,and their antibacterial activities

The two designed copper(II) complexes, [Cu(L^1m)₂]Cl₂ (1) (L^1m = amidino-O-methylurea) and [Cu(L^2m)₂]Cl₂ (2) (L^2m = N-methylphenyl-amidino-O-methylurea), have been investigated for their interaction with calf thymus DNA by utilizing the absorption titration method, viscometric studies and thermal denaturation. The cleavage reaction on pBR322 DNA has been monitored by agarose gel electrophoresis. The results suggest that the two complexes can bind to DNA by non-intercalative modes and exhibit nuclease activities in which supercoiled plasmid DNA is converted to the linear form. Complex 2, with an intrinsic binding constant (K_b) of 1.16 × 10⁵ M⁻¹, shows a higher binding efficiency and a better nuclease activity than complex 1, with a K_b value of 5.67 × 10⁴ M⁻¹. Their DNA cleavage potential can be significantly enhanced by hydrogen peroxide, indicating an oxidative cleavage process. Further examination of the antibacterial activities against Campylobacter has revealed inhibition zones of 9.0 (for 1) and 14.5 mm (for 2), which are in agreement with their minimum inhibitory concentration (MIC) values of 1.56 and 0.78 mg mL⁻¹, respectively. The substantially better reactivity of 2 results from the aromatic moieties on the side chain of the L^2m ligand which act as an additional binding site.     

Carbazole-oxadiazole containing polyurethanes as phosphorescent host for organic light emitting diodes

New types of polyurethanes (PUs) were prepared from condensation polymerization of isophorone diisocyanate (IPDI) with various combination of 9-butyl-3,6-bis(4-hydroxyphenyl)carbazole (Cz) and 2,5-bis(4-hydroxyphenyl)-1,3,4-oxadiazole (OXD), and end-capped with 4-tert-butyl phenol. The Cz-OXD PUs can also be used as host for phosphorescent dye. Red EL emission was obtained when Ir(btp)₂(acac) or Ir(2-phq)₂(acac) was used as the phosphorescent dyes in Cz-OXD (3:1) PU. Maximum brightness of 394 cd/m² and EL efficiency of 1 cd/A were achieved for the Ir(2-phq)₂(acac) base device. In addition, white light PLED was demonstrated when co-dopant of Ir(btp)₂(acac) and Firpic were used.