Stepwise dansyl grafting on the kaolinite interlayer surface

A block copolymer (PS-b-poly(l-Glu)) composed of polystyrene and poly(l-glutamic acid) was used as a stabilizer for dispersion polymerization of styrene. When dispersion polymerization of styrene was conducted at 70 °C in 80% dimethylformamide-water with 0.5 wt% PS-b-poly(l-Glu), spherical polystyrene particles with D_n = 0.72 μm and narrow size distribution were obtained. Whereas AIBN concentration did not have any effects on particle size, molecular weight of the polystyrene particles was strongly dependent on the initiator concentration. As concentration of the PS-b-poly(l-Glu) increased from 0.2 to 1.0 wt%, particle size decreased from D_n = 0.91 to 0.69 μm with keeping surface area occupied by one poly(l-glutamic acid) chain about S = 50 nm². On the other hand, an increase in initial concentration of styrene from 2 to 20 wt% caused an increase in particle size from D_n = 0.48 to 1.36 μm and a decrease in surface area per poly(l-glutamic acid) block from S = 91 to 45 nm². Colloidal stability of the polystyrene particles in aqueous solution was responsive to pH due to the surface-grafted poly(l-glutamic acid). For dispersion polymerization of styrene, the PS-b-poly(l-Glu) functions as both a stabilizer and a surface modifier.     

Micelle-mediated cloud point extraction and spectrophotometric determination of rhodamine B using Triton X-100

A new micelle-mediated cloud point extraction method is described for sensitive and selective determination of trace amounts of rhodamine B by spectrophotometry. The method is based on the cloud point extraction of rhodamine B from aqueous solution using Triton X-100 in acidic media. The extracted surfactant rich phase is diluted with water and its absorbance is measured at 563 nm by a spectophotometer. The effects of different operating parameters such as concentration of surfactant and salt, temperature and pH on the cloud point extraction of rhodamine B were studied in details and a set of optimum conditions were obtained. Under optimum conditions a linear calibration graph in the range of 5-550 ng mL⁻¹ of rhodamine B in the initial solution with r = 0.9991 (n = 15) was obtained. Detection limit based on three times the standard deviation of the blank (3S_b) was 1.3 ng mL⁻¹ (n = 10) and the relative standard deviation (R.S.D.) for 50 and 350 ng mL⁻¹ of rhodamine B was 2.40 and 0.87% (n = 10), respectively. The method was applied for the determination of rhodamine B in soft pastel, hand washing liquid soap, matches tip and textile dyes mixture samples.     

Aggregation and solubilization of organic solvents and petrol/gasoline in water mediated by block copolymers

A series of AB and ABA block copolymers of pDEGMEMA-b-pCHMA and pCHMA-b-pDEGMEMA-b-pCHMA cyclohexyl methacrylate (CHMA) and di(ethylene glycol) methyl ether methacrylate (DEGMEMA) with M_n ranging between 18,000 and 50,000 g mol⁻¹ and PDI = 1.09-1.32 were prepared via copper(I) mediated living radical polymerization with pyridylmethanimine ligands. Aggregation properties were investigated using a combination of ¹H NMR, dynamic and static light scattering. For comparative purposes poly(CHMA) and poly(DEGMEMA) homopolymers were prepared. The CAC values estimated for the di- and triblock copolymers soluble in cyclohexane are lower than 0.005 g L⁻¹ whereas the values found for block copolymers in methanol solutions are less than 0.070 g L⁻¹. DLS analysis showed the presence of micellar aggregates with diameters ranging from 25 to 40 nm with particle polydispersity indexes between 0.003 and 0.183. The pCHMA-b-pDEGMEMA-b-pCHMA micelles solubilized the aqueous phase in petrol/gasoline. The block copolymer-based micelles incorporate water within their hydrophilic domains, potentially overcoming a number of practical problems such as the formation of biphasic mixtures in solvent blends due to undesired water accumulation.     

An in-tube SPME device for the selective determination of chlorophyll a in aquatic systems

We report a new device for the estimation of the content of chlorophyll a pigment in water samples as an indicator of water quality. The extraction of the pigment from water was also optimized. 10 mL of water was filtered through a nylon filter (45 μm pore size and 13 mm of diameter), after the chlorophylls were dissolved by immersing the filter in 1 mL of a low non-hazardous solvent as ethanol. An in-valve in-tube SPME device coupled to capillary liquid chromatography with diode array detection was designed. A capillary column of 70 cm in length (0.32 mm i.d. coated with 5% diphenyl-95% polydimethylsiloxane, 3 μm coating thickness) was used as the loop of the injection valve for preconcentration and a Zorbax SB C₁₈ (SiO₂-based) 150 mm × 0.5 mm i.d., 5 μm column (Agilent) was used as analytical column. The achieved detection limit was 0.05 μg L⁻¹ and the working range of concentrations was 0.1-1 μg L⁻¹. % RSD values between 2 and 11 were obtained. Chlorophyll a in several water matrices was determined with good results in presence of other pigments such as chlorophyll b, pheophytin a and pheophytin b.     

Synthesis and investigation on the interaction with calf thymus deoxyribonucleic acid of a novel fluorescent probe 7-oxobenzo[b][1,10]phenanthroline-12(7H)-sulfonic acid

In this paper, the synthetic route of a potential antitumor reagent, benzo[b][1,10] phenanthrolin-7(12H)-one (BPO), was improved. A sulfonic group was introduced to BPO to form a new compound, 7-oxobenzo[b][1,10]phenan-throline-12(7H)-sulfonic acid (OPSA), in order to enhance its water-solubility. The molecular structure of OPSA has been confirmed by IR, UV, MS, ¹H NMR and elements analysis. It was proved in our experiments that DNA could quench the fluorescence of OPSA and the maximum quenched intensity appeared at 408 nm (λ_ex = 284 nm). The quenched fluorescence intensity was proportional to the concentration of DNA. Based on this phenomenon, OPSA had been used as the fluorescent probe for detection of calf thymus DNA (ct-DNA) and the corresponding linear response range was from 1.0 to 150.0 μg mL⁻¹ and the limit of detection (LOD) was 3.8 ng mL⁻¹. Its interaction with ct-DNA was investigated by fluorescence, absorption and viscosity measurements. When binding to ct-DNA, OPSA showed obvious fluorescence quenching and the quenched intensity was stable with the presence and absence of NaCl. The absorption spectra of OPSA had no evidence of increasing or decreasing when ct-DNA was added. The viscosity of OPSA and ct-DNA mixture showed no obvious change comparing with the viscosity of ct-DNA along. The results suggested that the interaction between OPSA and ct-DNA was groove binding in nature. Scatchard plots constructed from fluorescence titration data gave a binding constant of 8.9 × 10⁵ L mol⁻¹ and a binding site size of 0.35 base pairs per bound drug molecule.     

New star-shaped molecules derived from thieno[3,2-b]thiophene unit and triphenylamine

A series of new substituted triphenylamine (TPA) derivatives with alkyl thieno[3,2-b]thiophene and thiophene units were synthesized in a combinatorial manner. Suzuki coupling of a dioxaborolane TPA derivative and 2-bromo-3-nonylthieno[3,2-b]thiophene or Stille coupling of fresh stannyl thieno[3,2-b]thiophene was used. All compounds were characterized by ¹H and ¹³C NMR, HRMS, UV-vis spectrometry and DSC measurements. It was demonstrated that the optical and thermal properties of these materials can be tuned by varying both the conjugation length and thienothiophene and thiophene combination on the TPA branches. Moreover, the measured molar extinction coefficients were increasing from 63,000 (λ_max = 354 nm) to 131,000 L mol⁻¹ cm⁻¹ (λ_max = 428 nm) for TPA-thienothiophenes and TPA-bithiophene thienothiophenes, respectively. Some of them showed molecular glass behavior.     

Characterization of a new non-centrosymmetric polymorph of diphenyl-1,3,4-oxadiazole

Diphenyl-1,3,4-oxadiazole (DPO) crystallization experiments from solutions clearly reveal the polymorphism of the substance. Besides the formerly known centrosymmetric monoclinic structure with space group P2₁/c (DPO I) a new monoclinic structure with the non-centrosymmetric space group Cc is found (DPO II): a=2.4134(4) nm, b=2.4099(3)  nm, c=1.2879(2) nm, β=110.048(3)°, and V=7.0363(17) nm³. The asymmetric unit contains six independent molecules in a complex packing motif. A re-determination of the crystal structure of DPO I at room temperature gives lattice parameters a=0.51885(6) nm, b=1.8078(2) nm, c=1.21435(14) nm, β=93.193(3)°, and V=1.1373(2) nm³. X-ray measurements at 363 K show a significant increase of the unit cell volume by 1.6%. Differences between both structures concerning morphology and characteristic Raman bands are outlined in detail. DSC investigations show an irreversible transition from DPO I to DPO II at 97 °C. DPO II does not show any transition in the temperature range up to the melting point at 141 °C. The non-centrosymmetric DPO II structure shows triboluminescence.     

Crystal structure and luminescence of Sr0.99Eu0.01AlSiN3

Strontium europium aluminum silicon nitride, Sr_0.99Eu_0.01AlSiN₃, was synthesized by heating a mixture of binary nitrides at 2173 K and a N₂ gas pressure of 190 MPa. Single crystals of Sr_0.99Eu_0.01AlSiN₃ approximately 30 μm were obtained. The structure was confirmed to be an isotypic structure of CaAlSiN₃ in the orthorhombic space group Cmc2₁, analyzed by single-crystal X-ray diffraction. The lattice parameters are a=9.843(3), b=5.7603(16), c=5.177(2) Å, cell volume=293.53(17) Å³. It shows an orange-red photoluminescence by 5d→4f transition of Eu²⁺ at around 610 nm under excitation ranging from ultraviolet to 525 nm. The photoluminescence intensity, temperature characteristics, and oxidative stability were comparable or superior to those of CaAlSiN₃:Eu²⁺ phosphor.     

X-ray diffraction study on the thermal expansion behavior of cellulose Iβ and its high-temperature phase

Oriented films of cellulose prepared from algal cellulose were hydrothermally treated to convert them into highly crystalline cellulose Iβ. The lateral thermal expansion behavior of the prepared cellulose Iβ films was investigated using X-ray diffraction at temperatures from 20 to 300 °C. Cellulose Iβ was transformed into the high-temperature phase when the temperature was above 230 °C, allowing the lateral thermal expansion coefficient of cellulose Iβ and its high-temperature phase to be measured. For cellulose Iβ, the thermal expansion coefficients (TECs) of the a- and b-axes were α_a = 9.8 × 10⁻⁵ °C⁻¹ and α_b = 1.2 × 10⁻⁵ °C⁻¹, respectively. This anisotropic thermal expansion behavior in the lateral direction is ascribed to the crystal structure and to the hydrogen-bonding system of cellulose Iβ. For the high-temperature phase, the anisotropy was more conspicuous, and the TECs of the a- and b-axes were α_a = 19.8 × 10⁻⁵ °C⁻¹ and α_b = −1.6 × 10⁻⁵ °C⁻¹, respectively. Synchrotron X-ray fiber diffraction diagrams of the high-temperature phase were also recorded at 250 °C. The cellulose high-temperature phase is composed of a two-chain monoclinic unit cell, a = 0.819 nm, b = 0.818 nm, c (fiber repeat) = 1.037 nm, and γ = 96.4°, with space group = P2₁. The volume of this cell is 4.6% larger than that of cellulose Iβ at 30 °C.     

Facile, sensitive and selective fluorescence turn-on detection of HSA/BSA in aqueous solution utilizing 2,4-dihydroxyl-3-iodo salicylaldehyde azine

A novel fluorescence turn-on detection method of human serum albumin (HSA) and bovine serum albumin (BSA) in aqueous solution is investigated using 2,4-dihydroxyl-3-iodo salicylaldehyde azine (DISA). Upon the addition of DISA to HSA/BSA solution, a fluorescence turn-on effect at 529 nm can be observed with a large stokes shift of ∼129 nm based on hydrophobic binding-mode between protein and dye. Under the optimal condition, the linear ranges of fluorescence intensity for HSA and BSA are 0.1-30 μg mL⁻¹ with the relative correlation coefficient of R² = 0.991 (n = 10) and 0.3-50 μg mL⁻¹ with R² = 0.997 (n = 10); and the detection limits for HSA and BSA based on IUPAC (C_DL = 3S_b/m) are 20 ng mL⁻¹ and 50 ng mL⁻¹, respectively.     

Efficient photoluminescence of Dy at low concentrations in nanocrystalline ZrO2

Nanocrystalline ZrO₂:Dy³⁺ were prepared by sol-gel and the structural and photoluminescence properties characterized. The crystallite size ranges from 20 to 50 nm and the crystalline phase is a mixture of tetragonal and monoclinic structure controlled by dopant concentration. Strong white light produced by the host emission band centered at ∼460 nm and two strong Dy³⁺ emission bands, blue (488 nm) and yellow (580 nm), under direct excitation at 350 nm were observed. The highest efficiency was obtained for 0.5 mol% of Dy³⁺. Emission is explained in terms of high asymmetry of the host suggesting that Dy³⁺ are substituted mainly into Zr⁴⁺ lattice sites at the crystallite surface. Luminescence quenching is explained in terms of cross-relaxation of intermediate Dy³⁺ levels.     

In situ photopolymerization-coated pellets for pH-dependent drug delivery

An in situ photopolymerization-coating technique was applied to wrap the pellets surface with a pH-sensitive hydrogel layer made from acrylic acid and hydrophobic acrylate monomers. Powdered cellulose (Elcema^® P100) and poly(vinylpyrrolidone) (Kollidon^® 30) pellets containing theophylline were prepared by extrusion-spheronization, sprayed with an ethanol:water 50:50 v/v solution of the monomers, the cross-linker (N,N′-methylenebis(acrylamide)) and the initiator (Irgacure^® 2959), and immediately irradiated at 366 nm. The composition of coating mixture and the time of irradiation were optimized using oscillatory rheometry and analyzing the swelling and the drug release behaviour of the resultant hydrogels. When acrylic acid:lauryl acrylate 88:12 molar ratio was used, the coating did not significantly change the shape, size, or friability of the pellets, but remarkably modified theophylline release profiles. The thicker the coating layer, the better the pH-dependent control of drug release.     

Solid phase extraction-spectrophotometric determination of fluoride in water samples using magnetic iron oxide nanoparticles

A new, sensitive, fast and simple method using magnetic iron oxide nanoparticles (MIONs), as an adsorbent has been developed for extraction, preconcentration and determination of traces of fluoride ions. The determination method is based on the discoloration of Fe(III)-SCN complex with extracted fluoride ions which was subsequently monitored spectrophotometrically at λ_max = 458 nm. Various parameters affecting the adsorption of fluoride by the MIONs have been investigated, such as pH of the solution, type, volume and concentration of desorbing reagent, amount of adsorbent and interference effects. A linear response for the determination of fluoride was achieved in the concentration range of 0.040-1.250 μg mL⁻¹. The limit of detection (LOD) and limit of quantification (LOQ) for fluoride based on 3 times and 10 times the standard deviation of the blank (3S_b, 10S_b) were 0.015 and 0.042 μg mL⁻¹ (n = 20) for fluoride ion, respectively. A preconcentration factor of 50 was achieved in this method. The proposed procedure has been applied for determination of fluoride concentration in various water samples. The results obtained from this method were successfully compared with those provided by standard SPADNS method.     

A novel magnetic poly(aniline-naphthylamine)-based nanocomposite for micro solid phase extraction of rhodamine B

A novel Fe₃O₄–poly(aniline-naphthylamine)-based nanocomposite was synthesized by chemical oxidative polymerization process as a magnetic sorbent for micro solid phase extraction. The scanning electron microscopy images of the synthesized nanocomposite revealed that the copolymer posses a porous structure with diameters less than 50 nm. The extraction efficiency of this sorbent was examined by isolation of rhodamine B, a mutagenic and carcinogenic dye, from aquatic media in dispersion mode. Among different synthesized polymers, Fe₃O₄/poly(aniline-naphthylamine) nanocomposite showed a prominent efficiency. Parameters including the desorption solvent, amount of sorbent, desorption time, sample pH, ionic strength, extraction time and stirring rate were optimized. Under the optimum condition, a linear spiked calibration curve in the range of 0.35–5.00 μg L⁻¹ with R² = 0.9991 was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.10 μg L⁻¹ and 0.35 μg L⁻¹ (n = 3), respectively. The relative standard deviation for water sample with 0.5 μg L⁻¹ of RhB was 4.2% (n = 5) and the absolute recovery was 92%. The method was applied for the determination of rhodamine B in dishwashing foam, dishwashing liquid, shampoo, pencil, matches tips and eye shadows samples and the relative recovery percentage were in the range of 94–99%.     

Spectroscopic,structure and DFT studies of copper(II) and palladium(II) complexes of pyridine-2-carboxaldehyde-2-pyridylhydrazone: A chromogenic agent for palladium(II)

A heterocyclic hydrazone ligand, pyridine-2-carboxaldehyde-2-pyridylhydrazone, HL, 1, was investigated as a new chromogenic agent for selective detection of Pd²⁺. The ligand HL, 1, undergoes 1:1 complexation with Pd²⁺ and Cu²⁺ to form complexes [Pd(L)Cl], 1a and [Cu(HL)Cl₂], 1b respectively. The complex 1a gives a characteristic absorption peak at 536 nm with distinct reddish-pink coloration. The change in color can easily be distinguished from other metal complexes by the naked eye. No obvious interference was observed in the presence of other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Al³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Pb²⁺). The association constants, K_ass (UV–Vis), were found to be 5.52 ± 0.004 × 10⁴ for 1a and 4.94 ± 0.006 × 10⁴ for 1b at 298 K. On excitation at 295 nm, the ligand HL, 1 strongly emits at 372 nm due to an intraligand ¹(π–π^∗) transition. Upon complexation the emission peaks are blue shifted (λ_ex 295 nm, λ_em 358 nm for 1a and λ_ex 295 nm, λ_em 367 nm for 1b) along with a quenching (F/F₀ 0.32 for 1a and 0.88 for 1b) in the emission intensity. DFT and TDDFT calculations were highly consistent with the spectroscopic behavior of the ligand and complexes. The molecular structure of the complex 1b has been determined by single crystal X-ray diffraction studies.     

Two different spectrofluorimetric methods for simultaneous determination of gemfibrozil and rosiglitazone in human plasma

Two accurate, reliable, and highly sensitive spectrofluorimetric methods were developed for simultaneous determination of binary mixture gemfibrozil and rosiglitazone in human plasma without prior separation steps. The first method is based on synchronous fluorescence spectrometry using double scans. At Δλ = 27 nm, gemfibrozil yields detectable signal that is independent of the presence of rosiglitazone. Similarly, at Δλ = 120 nm the signal of rosiglitazone is not influenced by the presence of gemfibrozil. Signals at two wavelengths, 301 (Δλ = 27 nm) and 368 nm (Δλ = 120 nm) vary linearly with gemfibrozil and rosiglitazone concentrations over the range 100-700 ng mL⁻¹ (for gemfibrozil) and 20-140 ng mL⁻¹ (for rosiglitazone), respectively. The limits of detection (LOD) were 2.3 and 2.72 ng mL⁻¹ for gemfibrozil and rosiglitazone, respectively. The second method is based on the technique of simultaneous equations (Vierodt's method), in which 258 nm was selected as the excitation wavelength. Two equations are constructed based on the fact that at (λEm₂=302 nm of gemfibrozil) and (λEm₂=369 nm of rosiglitazone) the fluorescence of the mixture is the sum of the individual fluorescence of gemfibrozil and rosiglitazone. The limits of detection (LOD) were 28.1 and 23.63 ng mL⁻¹ for gemfibrozil and rosiglitazone, respectively. The proposed methods were successfully applied for the determination of the two compounds in synthetic mixtures and in human plasma with a good recovery.     

Flow injection determination of aluminium by spectrofluorimetric detection after complexation with N-o-vanillidine-2-amino-p-cresol: the application to natural waters

An on-line flow injection spectrofluorimetric method for the direct determination of aluminium in water samples is described. The method is based on the reaction of aluminium with N-o-vanillidine-2-amino-p-cresol (OVAC) in acidic medium at pH 4.0 to form a water-soluble complex. The excitation and emission wavelengths were 423.0 and 553.0 nm, respectively, at which the OVAC-Al complex gave the maximum fluorescence intensity at pH 4.0 in a 50% methanol-50% water medium at 50 °C. An interference from fluoride ions was minimised by the addition of Be²⁺. Other ions were found not to interfere at the concentrations likely to be found in natural waters. The proposed methods were validated in terms of linearity, repeatability, detection limit, accuracy and selectivity. Under these conditions, the calibration was linear up to 1000 μg L⁻¹ (r = 0.999). The limit of detection (3σ) for the determination of Al(III) was 0.057 μg L⁻¹ and the precision for multiple determinations of 3 ng mL⁻¹ Al(III) prepared in ultra-pure water was found to be 0.62% (n = 10).The Schiff base ligand could be used to determine ultra-trace aluminium from natural waters. Analysis of environmental certified reference materials showed good agreement with the certified values. The procedure was found to be equally applicable to both freshwater and saline solutions, including seawater.     

Preparation and lithium doping of gallium oxynitride by ammonia nitridation via a citrate precursor route

Gallium oxynitride, isostructural to hexagonal gallium nitride (h-GaN), was obtained by ammonia nitridation of a precursor prepared from the addition of citric acid to an aqueous solution of gallium nitrate. Gallium oxynitride produced at 750 °C had a small amount of gallium vacancies, and was formulated as (Ga_0.89□_0.11) (N_0.66O_0.34) where the symbol □ stands for gallium vacancy. Both the gallium vacancies and oxygen substituted for nitrogen were randomly distributed within the structure. The amount of vacancies decreased with nitridation temperatures in the range of 750-850 °C. Approximately, 10 at% Li⁺ was doped into the gallium oxynitride, using a similar preparation with the additional presence of lithium nitrate, resulted in the random substitution of Ga³⁺ in an atomic ratio of Li/Ga<1 at 750 °C. Oxygen was codoped with lithium and substituted nitrogen in the wurtzite-type crystal lattice. These substitutions reduced the electrical conductivity in the gallium oxynitride semiconductor. A new oxynitride, Li₂Ga₃NO₄, was also obtained with Li₂CN₂ impurity using similar preparations from a mixture of Li/Ga?1. The crystal structure was isostructural with h-GaN, and was refined as P6₃mc with a=0.31674(1) nm, and c=0.50854(2) nm. The Ga and Li occupancies at the 2b site were refined to be 0.6085 and 0.3915, respectively, assuming that the other 2b site was randomly occupied with 1/5O and 4/5N. When the new compound was washed for over 1 min for the removal of Li₂CN₂ impurities, it was decomposed to a mixture of α-GaOOH and α-LiGaO₂. The as-prepared product with Li/Ga=1 showed the highest intensity in yellow luminescence among the products under excitation at 254 nm.     

Determination of nateglinide in human plasma by high-performance liquid chromatography with pre-column derivatization using a coumarin-type fluorescent reagent

A sensitive and selective high-performance liquid chromatographic method has been developed and validated for the determination of nateglinide in human plasma. Nateglinide and the internal standard, undecylenic acid, were extracted from plasma by liquid-liquid extraction using a mixture of ethyl acetate-diethyl ether, 50:50 (v/v). Pre-column derivatization reaction was performed using a coumarin-type fluorescent reagent, N-(7-methoxy-4-methyl-2-oxo-2H-6-chromenyl)-2-bromoacetamide. The derivatization proceeded in acetone in the presence of potassium carbonate and catalyzed by 18-crown-6 ether. The fluorescent derivatives were separated under isocratic conditions on a Hypersil BDS-C8 analytical column (250.0 mm × 2.1 mm i.d., particle size 5 μm) with a mobile phase that consisted of 65% acetonitrile in water and pumped at a flow rate of 0.50 mL min⁻¹. The excitation and emission wavelengths were set at 345 and 435 nm, respectively. The assay was linear over a concentration range of 0.05-16.00 μg mL⁻¹ for nateglinide with a limit of quantitation of 0.05 μg mL⁻¹. Quality control samples (0.05, 4.50 and 16.00 μg mL⁻¹) in five replicates from five different runs of analysis demonstrated intra-assay precision (%coefficient of variation <6.8%), inter-assay precision (%coefficient of variation <1.6%) and an overall accuracy (%relative error) less than −3.4%. The method can be used to quantify nateglinide in human plasma covering a variety of pharmacokinetic or bioequivalence studies.     

The absorption and thermal behaviors of PET-SiO2 nanocomposite films

In this paper, to improve properties of Poly(ethylene terephthalate) (PET) in thermal stability and barrier to water, the films of PET, PET with micronmeter Silica/Polystyrene (SiO₂/PS) composites (SPET) and PET with nano-SiO₂/PS composites (SNPET) are prepared and their water absorption and thermal stable behaviors are investigated.In the samples, silica load is optimized as 2 wt%, at which silica not only disperses well but also forms the tough morphology in PET as investigated by SEM. The nanoeffect and thermal degradation behaviors of SNPET are firstly presented.The water absorption experiments for the samples show that the maximum absorption water weight percentage (C_∞) and the pseudo-diffusion coefficient (D) of water reduce with SiO₂ particle size varying from 440 nm to 40 nm, and the barrier property to water of SNPET is superior to those of pure PET and SPET. At the minimum silica size of 40 nm, the C_∞ and D of SNPET approach the minimum values that are 0.946% and 7.075 × 10⁻¹³ m² s⁻¹, respectively. Fixing SiO₂ size at 40 nm, with un-modified SiO₂ and modified SiO₂, the core-shell SiO₂/PS nanocomposite particles are more effective on keeping PET from absorbing water. With the increase in nano-SiO₂ load, the C_∞ and D of SNPET films reduce, proving that the nano-SiO₂ particles can inhibit water absorption. When amorphous SNPET films are annealed at 130 °C, their C_∞ and D quickly decrease with the increase in annealing time, stating that the crystallized SNPET also retards the water absorption or diffusion in PET. Under oversaturated oxygen atmosphere, the C_∞ and D of amorphous PET and SNPET, and crystallized SNPET samples are higher than those of corresponding samples without flowing oxygen, showing that oxygen promotes the films to absorb water.TGA results show that SNPET keeps similar thermal degradation behavior under the conditions of with and without both water and oxygen. But SNPET is more thermally stable than PET.