Preparation of composites and nanocomposites based on bentonite and poly(sodium acrylate). Effect of amount of bentonite on the swelling behaviour

A series of composite and nanocomposite hydrogels were synthesized by copolymerization reaction of partially neutralized acrylic acid (SA) on bentonite micropowder (BT) using N,N′-methylenebisacrylamide (MBA) as a crosslinker and potassium persulfate (I) as an initiator in aqueous solution. The influences of Na⁺-BT, organoBT (O-BT), and the content of the BT in the copolymeric gels on the swelling behaviour in deionized water and saline solution (0.2 wt.% NaCl_(aq)) were investigated. Results showed that the equilibrium swelling (W_∞) was decreased by adding a small amount of the BT, however, at higher BT contents, the W_∞ increased with the increase of the amount of clay. It was found that a concentration of 14 wt.% Na⁺-BT gave the best results absorption (955 g/g). Moreover, the amount of swelling for these absorbents in saline solution was smaller than that in deionized water. These hydrogels were characterized by X-ray diffraction and scanning electron microscopy. Finally, the thermogravimetric analysis indicated that introduction of clay to the polymer network resulted in an increase in thermal stability.     

Structural characterization of temperature-sensitive hydrogels by field emission scanning electron microscopy (FESEM)

The submicrometer structure of the temperature-sensitive hydrogels was observed by field emission scanning electron microscopy (FESEM), using synthesized hydrogels of different outer size and shape. The hydrogel structure strongly depends on the homogeneity of the polymer chains during the crosslinking process. A porous structure of the poly(vinyl-methyl-ether) (PVME) bulkgel, synthesized by electron beam irradiation of a concentrated polymer solution, was observed in the swollen state because the phase transitions temperature is acquired through the crosslinking process. Photo-crosslinking reaction of the poly(N-isopropylacrylamide) (PNIPAAm) copolymer in the dry state to form PNIPAAm thin films leads to a rather homogeneous structure. In the shrunk state both gels possess structure being more compact than in the swollen state. We also synthesized PVME and PNIPAAm gels with small outer dimensions in the range of some 100 nm. Heating of the thermo-sensitive polymer in diluted solutions collapses the polymer chains or aggregates. The crosslinking reaction (initiated by electron beam or UV irradiation) of these phase separated structures produces thermo-sensitive microgels. These microgel particles of PVME and PNIPAAm are spherical shape having diameters in the range of 30 - 500 nm.     

High water content clay–nanocomposite hydrogels incorporating guanidinium‐pendant methacrylamide: Tuning of mechanical and swelling properties by supramolecular approach

Novel clay–polymer composite hydrogels with high water content (up to 98 wt %) are developed, in which mechanical properties are reinforced by the formation of multiple ion‐pairs between the polymer chains and clay nanosheets (CNS). When a small amount of guanidinium‐pendant methacrylamide (0.1–0.2 wt %) is copolymerized with a neutral monomer (0.5–2.0 wt %) in an aqueous dispersion of CNS (1.0–3.0 wt %), a self‐standing hydrogel with satisfactory mechanical toughness and elasticity results, despite its high water content (95–98 wt %). The mechanical properties and swelling behaviors of the hydrogels can be tuned by the amount of the guanidinium‐pendant acrylamide. A systematic study indicates that the ion pairs, formed between the guanidinium groups in the polymer chains and the oxyanions on the surfaces of the CNS, serve as crosslinking points in the three‐dimensional network developed in these hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 839–847     

Rapid swelling and deswelling in cryogels of crosslinked poly(N-isopropylacrylamide-co-acrylic)

Thermally sensitive hydrogels of poly[N-isopropylacrylamide (NIPA)-co-acrylic(AA)] hydrogels with N,N-methylene bisacrylamide (BIS) as crosslinker have been synthesised via a two-step procedure in which, the initial polymerisation is conducted for various times at 18 °C, this step being followed by polymerisation for one fixed time at −22 °C. The gravimetrically determined rates of swelling/deswelling for these materials termed “cryogels” prepared by this two-step polymerisation are much higher than those for the same type of hydrogel prepared via conventional methods (30 °C for 24 h). For example the time for the former xerogel to take up 70% of its final water content at 25 °C is just 18 min, compared with a time 300 min for the latter to attain the same uptake of water. During deswelling (shrinking) at 50 °C, which is above the lower critical temperature, the hydrogel loses 60 and 90 wt.% water in 1 and 10 min respectively, compared to a timescale for the corresponding crosslinked copolymers prepared by conventional methods of about 100 min for 50 wt.% water loss. A third type of hydrogel was made by a cold treatment (CT), for which the hydrogel prepared by conventional polymerisation was stored in the frozen state. The swelling rate of these CT xerogels was the same as that for xerogels prepared by conventional polymerisation, but the deswelling rate of the former was higher than that of the latter; for example, during deswelling, a loss of 90% water is attained within a few minutes.Scanning electron microscopy, digital photographs and flotation experiments together with swelling ratio studies reveal that the polymeric network of cryogel produced by the two-step polymerisation method is characterised by an open structure with more pores and higher swelling ratio but lower mechanical strength compared to the conventional hydrogels. The polymerisation was taking place on moderate freezing condition and the hydrogel was stored in a frozen state and subsequent thawing of polymer to be very useful the acceleration the response rate of this kind hydrogels. Such rapid response hydrogels have potential applications in separation and drug release technologies for example.     

Thermo- and pH-sensitive comb-type grafted poly(N,N-diethylacrylamide-co-acrylic acid) hydrogels with rapid response behaviors

Poly(N,N-diethylacrylamide) with a terminal hydroxyl end group (PDEA-OH) was synthesized by radical telomerization of N,N-diethylacrylamide (DEA) monomer using 2-hydroxyethanethiol as a chain transfer agent. Macromonomer of thermo-sensitive PDEA was synthesized by condensation reaction of PDEA-OH with acryloyl chloride. The macromonomer was characterized by FTIR and ¹H NMR, and the molecular weight was determined by GPC. Thermo- and pH-sensitive comb-type grafted poly(N,N-diethylacrylamide-co-acrylic acid) (PDEA-co-AA) hydrogels (GHs) were successfully prepared by grafting PDEA chains with freely mobile ends onto the backbone of a cross-linked (PDEA-co-AA) network. The results showed that the deswelling behavior of the hydrogels was dependent on the test temperature. At 45 °C (beneath the VPTT of the hydrogels), both the normal-type hydrogels (NHs) and comb-type grafted P(DEA-co-AA) hydrogels had lower deswelling rates. While at 60 °C (far beyond the VPTT of the hydrogels), the deswelling rates of the GHs were faster than that of the NHs. Furthermore, pulsatile stimuli-responsive studies indicated that the GHs had excellent thermo-reversibility and were superior to the NHs in the magnitude of their swelling ratios to temperature changes. However, the reversibility to pH changes was poor for both the NHs and the GHs.     

Investigation of the structure and swelling of poly(N-isopropyl-acrylamide-acrylamide) and poly(N-isopropyl-acrylamide-acrylic acid) based copolymer and composite hydrogels

We synthesized, thermo- and pH-sensitive gels and tested them as skin extenders. Our aim is the development of copolymer and composite hydrogels that, when implanted under the human skin, swell osmotically and thereby induce skin growth. In the course of the polymerization reaction, we produced copolymers with variable compositions, starting from different acrylic compounds [N-isopropyl-acrylamide (NIPAAm), acrylamide (AAm), and acrylic acid (AAc)]. The mechanical strength and the swelling stability of the gels are enhanced by the addition of fillers [Na-montmorillonite and Na-montmorillonites organophilized with alkylammonium ions (C_n-m.), n?=?4, 12, 18]. With this method we synthesized composite hydrogels. We observed that in the case of composites synthesized with the addition of fillers, relatively low filler contents (1–5 wt.%) resulted in more extensive swelling and stronger gel structure. During the experiments, the monomer composition (0/100–100/0 mol% NIPAAm/AAm or AAc) and the cross-link density (50–1500 mol%) of the gels (M/C ratio) and, in the case of composites, the quality and quantity of fillers are varied. The filler content of composites varies between 1 and 25 wt.%. The extent of swelling and the viscoelastic properties can be manipulated through the ratios of these parameters. In the case of certain copolymer and composite gels, values of desorption enthalpy (ΔH _m) corresponding to the actual water contents were also determined by thermoanalytical measurements (differential scanning calorimetry, DSC). Swelling values determined by gravimetry and enthalpies calculated from DSC measurements were found to be in good correlation. Even in the case of the relatively hydrophobic poly(NIPAAm)-based gels, an enthalpy value of 98.41 kJ/mol was obtained, which is twice the value measured in pure water (41.74 kJ/mol). Evaluation and comparison of the rheological and DSC results also allowed conclusions to be drawn concerning the types of interaction operating among the three components of the system, i.e., the polymer skeleton and the filler and water molecules.     

Synthesis and Properties of Polypyrrole/Chitosan Composite Hydrogels

Conducting polymer hydrogels consisting of polypyrrole (PPy) and chitosan (CS) are prepared by static polymerization of pyrrole using methyl orange (MO) as the dopant and Fe₂(SO₄)₃ as the oxidant in the CS aqueous solution. PPy/CS composite hydrogels not only have good electrical conductivities, but also exhibit excellent swelling/deswelling behaviors due to the participation of one-dimensional conducting PPy blocks in the hydrogel network. The effects of the amount of the oxidant and ionic strength on the physical properties of PPy/CS composite hydrogels are studied in detail. The results show that PPy/CS composite hydrogels have improved water absorbencies in saline solutions compared with the conventional polyelectrolyte hydrogel.     

Poisson's ratio of polyacrylamide (PAAm) gels

Poisson's ratio (μ₀) of polyacrylamide (PAAm) gels was estimated. The value of μ₀ for PAAm gels was found to be 0.457, which is close to that for poly (vinyl alcohol) (PVA) gels swollen in the mixture of dimethylsulfoxide (DMSO) and water, but is higher than the value for PVA hydrogels.     

Switchable friction of stimulus-responsive hydrogels

Poly(N-isopropylacrylamide) (pNIPAAm) gels are stimulus-responsive hydrogels that exhibit large reversible changes in their volume and surface physicochemical properties near the lower critical solution temperature (LCST) in response to external stimuli, such as a change in temperature or solvent composition. Here we report how different phase states, induced isothermally by changes in the solvent composition, affect the tribological properties of pNIPAAm hydrogels. Our measurements indicate that gels in a collapsed conformation (above the LCST) exhibit significantly more friction than swollen gels (below the LCST) at low shear rates. These differences arise from changes in the surface roughness, adhesive interactions, and chain entanglements of the gel surfaces associated with the phase transition. Importantly, we show that the changes in friction, triggered by an external stimulus, are reversible. These reversible and possibly tunable changes in friction may have a significant impact on the design of coatings for biosensors and for actuation devices based on stimulus-responsive hydrogels.     

Stimuli-responsive nanocomposite gels

A new class of polymer hydrogels, nanocomposite hydrogels (NC gels), consisting of a unique organic (polymer)/inorganic (clay) network structure, was synthesized by in situ free-radical polymerization in the presence of exfoliated clay nanoparticles in an aqueous system. The resulting NC gels overcame most of the disadvantages associated with chemically cross-linked hydrogels, such as mechanical fragility, structural heterogeneity, and slow de-swelling rate. By using thermo-sensitive poly(N-isopropylacrylamide) (PNIPA) as a constituent polymer, NC gels with remarkable mechanical, optical, and swelling properties as well as thermo-sensitivity were obtained. The various properties of NC gels, such as transparency, gel volume, cell culturing, and surface friction changed significantly in response to the temperature and surrounding conditions. All the excellent properties and new stimuli-responsive characteristics of NC gels are attributed to the unique PNIPA/clay network structure. The thermo-sensitivities and the transition temperature can largely be controlled by varying the clay content and by the addition of solutes.     

Comparative rheological study of ionic semi-IPN composite hydrogels based on polyacrylamide and dextran sulphate and of polyacrylamide hydrogels

Ionic semi-interpenetrating polymer networks composite hydrogels were synthesized by free-radical polymerization using dextran sulphate (DxS), acrylamide as monomer and N,N′-methylene(bis)acrylamide as cross-linking agent. The viscoelastic properties of these composite hydrogels were investigated by oscillatory shear measurements under small deformation conditions comparative with those of polyacrylamide gels. Changes of the rheological properties of composite hydrogels have been studied in terms of polymerization temperature, cross-linker ratio, initial monomer concentration and molar mass of DxS. The results showed that the stability of the composite hydrogels obtained at room temperature (22?°C) was relatively low because the storage modulus (G′) was only eight times higher than the loss modulus (G″), while for those obtained by cryopolymerization (?18?°C), the stability was improved, the G′ values being about 30 times higher than those of G″. This behaviour indicated that, by conducting the synthesis of hydrogels below the freezing point of the reaction solutions, an enhancement of the hydrogels elasticity was achieved. The network parameters, i.e. the average molecular weight between two cross-links and the cross-link density of the composite hydrogels prepared at ?18?°C, were estimated from rheological data.     

Synthesis and characterization of thermoresponsive isopropylacrylamide-acrylamide hydrogels

In this study, hydrogels of poly(N-isopropylacrylamide-co-acrylamide) having a thermoresponsive character were prepared by a redox polymerization method. NIPAM-co-AAm hydrogels with different thermoresponsive properties were obtained by changing the initial NIPAM/AAm mole ratio and crosslinker concentration.Equilibrium-swelling ratio, dynamic swelling ratio and dynamic deswelling ratio were evaluated for all hydrogel systems. The fast shrinking was observed with all gels. The time required for equilibrium shrinking increased with the increase of acrylamide content in the gel.     

A novel sodium carboxymethylcellulose/poly(N‐isopropylacrylamide)/Clay semi‐IPN nanocomposite hydrogel with improved response rate and mechanical properties

A novel semi‐IPN nanocomposite hydrogel (CMC/PNIPA/Clay hydrogel) based on linear sodium carboxymethylcellulose (CMC) and poly(N‐isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was prepared. The structure and morphology of these hydrogels were investigated and their swelling and deswelling kinetics were studied in detail. TEM images showed that the clay was substantially exfoliated to form nano‐dimension platelets dispersed homogeneously in the hydrogels and acted as a multifunctional crosslinker. The CMC/PNIPA/Clay hydrogels swell faster than the corresponding PNIPA/Clay hydrogels at pH 7.4, whereas they swell slower than the PNIPA/Clay hydrogels at pH 1.2. The CMC/PNIPA/Clay nanocomposite hydrogels showed much higher deswelling rates, which was ascribed to more passway formed in these hydrogels for water to diffuse in and out. The deswelling process of the hydrogels could be approximately described by the first‐order kinetic equation and the deswelling rate decreased with increasing clay content. The mechanical properties of the CMC/PNIPA/Clay nanocomposite hydrogels were analyzed based on the theory of rubber elasticity. It was found that with increasing clay content, the effective crosslink chain density, v_e, increased whereas the molecular weight of the chains between crosslinks M_c decreased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1546–1555, 2008     

Effects of counter ions of clay platelets on the swelling behavior of nanocomposite gels

The effects of replacing the native Na(+) counter ions associated with the clay platelets by various other cations on the swelling behavior of nanocomposite (NC) gels consisting of an organic (polymer)/inorganic (clay) network were investigated. The negative surface charge of the clay platelet conferred an ionic nature on the NC gels making them a type of polyelectrolyte gel; consequently, the swelling behavior of the NC gels was strongly influenced by the valence of the co-existing counter ions. NC gels containing monovalent cations such as Na(+), K(+) and Li(+) exhibited large swellings and subsequent deswelling in water after attaining maximum degrees of swelling. In contrast, introduction of multivalent cations such as Ca(2+), Mg(2+), and Al(3+) into NC gels depressed markedly both the swelling and subsequent deswelling. The decreased swelling and suppressed deswelling with multivalent ions were strongly influenced by the initial gel state and result from the formation of additional cross-links through ionic interactions between the clay platelets and the multivalent cations. Also, the similar swelling behaviors were observed for all NC gels with different clay concentration. Further, reversible absorption/desorption and selective absorption of multivalent cations were observed for the NC gels examined.     

Non-Gaussian elasticity of swollen poly(N-isopropylacrylamide) gels at high charge densities

Modulus of elasticity of highly charged N-isopropylacrylamide (NIPA) based hydrogels (PNIPA) are measured at various swelling degrees in water. The sodium salt of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) was used as the ionic comonomer of NIPA in the hydrogel preparation. The mole fraction of AMPS in the comonomer feed was varied between 0 and 1, while the crosslinker ratio was fixed at 1/85. The elasticity data show that the equilibrium swollen PNIPA hydrogels are in the non-Gaussian regime. Equations were derived based on the inverse Langevin function for the swelling ratio and the modulus of highly charged PNIPA hydrogels and checked by experiments. Results of calculations show good agreement to the swelling and elasticity data of highly swollen PNIPA gels.     

Novel nucleotide‐responsive hydrogels designed from copolymers of boronic acid and cationic units and their applications as a QCM resonator system to nucleotide sensing

Hydrogels comprised of boronic acid monomer (3), cationic monomer (4), and crosslinker monomer (5) were prepared by radical copolymerization. These hydrogels could efficiently bind nucleotides such as AMP and ATP by a cooperative action of the boronic acid‐cis‐diol complexation and the electrostatic interaction between the cationic unit and the phosphate group. The binding processes were conveniently monitored by the swelling and deswelling behaviors of these hydrogels in aqueous solution. For the hydrogel with the specific monomer composition an interesting “charge inversion” was observable: with increasing AMP or ATP concentration, the cation‐rich hydrogel was gradually charge neutralized, once shrunken at the neutral stage, and then swollen again because of the anion‐rich charge state. These nucleotide‐induced swelling and deswelling phenomena were reproduced on the gold surface of a QCM resonator. Therefore, the present system is not only interesting to consider nucleotide‐induced mechanochemical properties, but also applicable as a sensor to the nucleotide detection. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1302–1310, 2000     

Superfast Responsive Ionic Hydrogels: Effect of the Monomer Concentration

A series of strong polyelectrolyte gels were prepared in aqueous solution, using the sodium salt of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) as the monomer and N,N'‐methylene(bis)acrylamide (BAAm) as a crosslinker. The gels were both prepared below (?22°C) and above (25°C) the bulk freezing temperature of the water, producing cryogels and hydrogels, respectively. The crosslinker (BAAm) content was set at 17 mol%, while the initial monomer concentration C_o was varied over a wide range. It was found that, at ?22°C, a macroscopic network starts to form at an initial monomer concentration of as low as 0.1 w/v%. In contrast to the conventional hydrogels formed at 25°C, the cryogels have a discontinuous morphology consisting of polyhedral pores of sizes 10⁰–10² μm. The cryogels exhibit superfast swelling properties, as well as reversible swelling–deswelling cycles in water and acetone. An increase in the initial monomer concentration from 2.5 to 10% further increases the response rate of the cryogels due to the simultaneous increase of the porosity of the networks.     

Change in Young’s modulus of poly(N-isopropylacrylamide) gels by volume phase transition

Mechanical properties of poly(N-isopropylacrylamide) (PNIPA) gels were examined both in swollen and collapsed state. Stress–strain curve of the gel in the swollen state was linear and the collapsed gel also showed almost linear stress–strain behavior. The initial Young’s modulus (E₀) in the collapsed state was much higher than that in the swollen state. The number of cross-links increased largely by the introduction of the physical cross-links due to collapse of the gels.     

Radiation synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) hydrogels

In this study, radiation synthesis and characterization of swelling behavior and network structure of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) (P(DMAEMA-co-VP)), hydrogels were investigated. PDMAEMA and P(DMAEMA-co-VP) hydrogels in the rod forms were prepared by irradiating the ternary mixtures of DMAEMA/VP/cross-linking agent, ethyleneglycol dimethacrylate (EGDMA), by gamma rays at ambient temperature. In composition ranges where the three components were completely miscible, water was also added to the ternary mixture to provide the formation of homogeneous polymerization and gelation. The influence of irradiation dose, comonomer, VP, and cross-linking agent, EGDMA, content on the total percentage gelation and monomer conversion were investigated. The effect of pH and temperature on the swelling behavior of hydrogels have also been examined. Hydrogels showed typical pH response and temperature responses, such as low-pH and low temperature swelling and high-pH and high temperature deswelling. Polymer-solvent interaction parameter (χ) and enthalpy and entropy changes appearing in the χ parameter for the P(DMAEMA-co-VP)-water system were determined by using Flory-Rehner theory of swelling equilibrium. The negative values for ΔH and ΔS indicate that prepared pure PDMAEMA and P(DMAEMA-co-VP) hydrogels have lower critical solution temperature (LCST) and Flory-Rehner theory of swelling equilibrium provides a satisfactory agreement to the experimental swelling data of the hydrogels.     

Effect of montmorillonite on gelation and swelling behavior of sulfonated polyacrylamide nanocomposite hydrogels in electrolyte solutions

Nanocomposite hydrogels were prepared by cross-linking of aqueous solutions of sulfonated polyacrylamide/sodium montmorillonite with chromium triacetate. The gelation process and effects of clay content and ionic strength on swelling behavior were investigated. X-ray diffraction patterns indicated that exfoliated type of microstructure was formed. Study of the gelation behavior using dynamic rheometery showed that the limiting storage modulus of the nanocomposite (NC) gels decreased with increasing clay content up to 1000 ppm, but it increased by further increase of Na⁺-montmorillonite concentration. It was also found that with increasing the clay content, the viscous energy dissipation properties of the nanocomposite gels increased. The swelling ratio of nanocomposite gels in tap water decreased as the concentration of the clay increased. However, nanocomposite gels showed higher resistance against syneresis in electrolyte solutions as compared with unfilled gels. Therefore, they are potentially good candidates for enhanced oil recovery applications.