Exfoliated high-impact polystyrene/MMT nanocomposites prepared using anchored cationic radical initiator-MMT hybrid

High-impact polystyrene (HIPS)/montmorillonite (MMT) nanocomposites were prepared via in-situ polymerization of styrene in the presence of polybutadiene, using intercalated cationic radical initiator-MMT hybrid. Incomplete exfoliation of the silicate layers in the HIPS nanocomposites was observed when a bulk polymerization was employed. On the other hand, the silicate layers were efficiently exfoliated in the PS matrix during a solution polymerization, due to the low extra-gallery viscosity, which can facilitate the diffusion of styrene monomers into the clay layers. The resulting exfoliated HIPS/MMT nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis, particle size analysis, gel permeation chromatography, and dynamic mechanical analysis. The nanocomposites exhibited significant improvement in thermal and mechanical properties. For example, about 50% improvement in Young’s modulus was achieved with 5 wt% of clay, compared to the unmodified polymer counterpart.     

Shear‐induced change of exfoliation and orientation in polypropylene/montmorillonite nanocomposites

For the improved dispersion of montmorillonite (MMT) in a polypropylene (PP) matrix, PP/MMT nanocomposites prepared via direct melt intercalation were further subjected to oscillating stress achieved by dynamic packing injection molding. The shear‐induced morphological changes were investigated with an Instron machine, wide‐angle X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The original nanocomposites possessed a partly intercalated and partly exfoliated morphology. A transformation of the intercalated structure into an exfoliated structure occurred after shearing, and a more homogeneous dispersion of MMT in the PP matrix was obtained. However, the increase of the exfoliated structure was accompanied by the scarifying of the orientation of MMT layers along the shear direction. Some bended or curved MMT layers were found for the first time by TEM after shearing. However, the orientation of PP chains in the PP/MMT nanocomposites became very difficult under an external shear force; this indicated that the molecular motion of PP chains intercalated between MMT layers was highly confined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1–10, 2003     

Fire retardancy and biodegradability of poly(methyl methacrylate)/montmorillonite nanocomposite

The poly(methyl methacrylate) (PMMA)/montmorillonite (MMT) nanocomposite was prepared by emulsifier-free emulsion technique and its structure and properties were characterized with infra red, X-ray diffraction, transmission electron microscopy, thermogravimetric analysis, and cone calorimetry. The highly exfoliated MMT layers with dimension 1-2 nm in thickness were randomly dispersed in the polymer matrix containing MMT lower than 5% w/v, whereas the intercalated structure was predominant with MMT content higher than 5% w/v. Consequently, the fine dispersion of the MMT and the strong interactions between PMMA and MMT created significant improvement of the thermo-stability and fire retardancy of the nanocomposite. The combustion behavior has been evaluated using oxygen consumption cone calorimetry. In addition, a scheme was proposed to describe fire retardancy of PMMA and MMT as well as the correlation between the interaction and structure in polymer/clay systems. The biodegradability of the nanocomposite fire-retardant was tested for its better commercialization.     

乳液聚合法制备剥离型PS/MMT纳米复合材料

以阳离子表面活性剂十八烷基三甲基氯化铵(OTAC)和烯丙基十八烷基二甲基氯化铵(ATAC)为插层处理剂改性蒙脱土(MMT),原位乳液聚合分别制备了PS/C18MMT和PS/AC18MMT两种纳米复合材料.XRD和TEM分析表明,MMT均被剥离成单个或几个片层无规的分散在PS基体中,TGA分析表明,MMT的加入提高了材料的耐热性能,当PS基体与有机化处理的MMT片层发生一定的化学连接后,PS/AC18MMT纳米复合材料表现出更好的耐热性能.动态力学分析表明,MMT的加入提高了PS的玻璃态储能模量,降低了材料的动态损耗;PS/AC18MMT纳米复合材料的玻璃化温度较PS有所提高,而PS/C18MMT的玻璃化温度与PS相比略有降低.     

Electrospinning of polyurethane/organically modified montmorillonite nanocomposites

Polyurethane/organically modified montmorillonite (PU/O‐MMT) nanocomposites were electrospun and the effect of O‐MMT on the morphology and physical properties of the PU/O‐MMT nanofiber mats were investigated for the first time. The average diameters of the PU/O‐MMT nanofibers were ranged from 150 to 410 nm. The conductivities of the PU/O‐MMT solutions were linearly increased with increasing the content of O‐MMT, which caused a decrease in the average diameters of the PU/O‐MMT nanofibers. The as‐electrospun PU and PU/O‐MMT nanofibers were not microphase separated. The exfoliated MMT layers were well distributed within the PU/O‐MMT nanofibers and oriented along the fiber axis. When the PU/O‐MMT nanofibers were annealed, the exfoliated MMT layers hindered the microphase separation of the PU. The electrospinning of PU/O‐MMT nanocomposites resulted in PU nanofiber mats with improved Young's modulus and tensile strength. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3171–3177, 2005     

Immobilization of poly(fluorene) within clay nanocomposite: an easy way to control keto defect

Blue light emitting cationic polyfluorene polymer(PF)/montmorillonite (MMT) nanocomposites were prepared by solution intercalation and exfoliation method to evaluate the effect of MMT on the nanocomposite structures, properties and morphologies. The properties of PF-MMT composites, containing 1-50 mass% MMT, were characterized unambiguously with the help of multiple analytical techniques, with focus on the keto defect and photostability of PF in the nanocomposites. XRD and HRTEM studies reveal both exfoliation of MMT galleries at lower content of MMT in composites and intercalation of PF chains into the MMT galleries at higher MMT content. The nanocomposites show higher thermal stability than pristine PF as anchorage of nanoclay in PF matrix occur through the electrostatic interaction between nanoclay and polymer. The decrease in Si-O-Si stretching frequency during exfoliation is much higher than in intercalation, as Si-O-Si experience lesser hindrance to vibrate in exfoliated MMT galleries. The gradual redshift of π-π(*) transition peak of PF with increasing MMT content in composites confirms the uncoiling of PF in clay galleries. The photoluminescence characteristics reveal interruption of interchain interaction in this intercalated and exfoliated organic/inorganic hybrid system, which reduces the low-energy emission that results from keto defect. Due to very high aspect ratio of MMT, it can act as an efficient exciton blocking layer and a barrier to oxygen diffusion, which may lead to a device with high color purity and enhanced photostability. Again current-voltage characteristics of nanocomposite films confirm the retention of LED properties after nanocomposite formation.     

插层聚合制备聚丙烯/蒙脱土纳米复合材料及其结构性能表征

将插层聚合的概念引入烯烃聚合,制备了聚丙烯／蒙脱土（PP／MMT）纳米复合材料。X射线衍射和TEM分析结果表明,蒙脱土在聚丙烯基体中达到了纳米级的分散,动态力学性能研究结果表明,在高于Tg的温度区域内PP／MMT纳米复合材料的储能模量（E′）成倍增加,加入8％的蒙脱土（MMT）,PP／MMT的E′提高近3倍。PP／MMT的玻璃化转变温度Tg有一定程度的提高,随蒙脱土含量的增加,PP／MMT的热分解温度和热变形温度（HDT）都有大幅度提高。     

Preparation of polystyrene/montmorillonite nanocomposites using a new radical initiator-montmorillonite hybrid via in situ intercalative polymerization

Polystyrene/montmorillonite (PS/MMT) nanocomposites were prepared by in situ free radical intercalative polymerization, using 1, 3 and 5 wt% of a new cationic radical initiator-MMT hybrid. The corresponding nanocomposites were designated as PS/MMT-1, PS/MMT-3 and PS/MMT-5, respectively. The silicate layers were well exfoliated and randomly dispersed in the PS/MMT-1 and PS/MMT-3, but were less exfoliated in the PS/MMT-5, due to the predominant extra-gallery polymerization over the intra-gallery polymerization. The unique properties of nanocomposites resulted from the strong interactions between the nano-sized silicate layer surfaces and the polymer chains. The onset temperature of thermal degradation, and the glass transition temperature, increased with increasing hybrid content, up to 3 wt%. The molecular weights of the PS in the PS/MMT-1 and PS/MMT-3 were less than those calculated theoretically, due to the predominant intra-gallery polymerization.     

Structure and mechanical properties of poly(l-lactide)/layered silicate nanocomposites

Poly(ε-caprolactone) (PCL) masterbatches with the intercalated and the exfoliated morphology were prepared by ring opening polymerization of ε-caprolactone in the presence of organomodified montmorillonite (MMT) Cloisite 30B. Poly(l-lactide) (PLLA) nanocomposites with Cloisite 30B or PCL masterbatches were prepared by melt blending. The effects of the silicate type, MMT content and the nanocomposite morphology on thermal and mechanical properties of PLLA nanocomposites were examined. The montmorillonite particles in PLLA/Cloisite 30B and PLLA/intercalated masterbatch nanocomposites were intercalated. In contrary to expectations, the exfoliated silicate layers of exfoliated masterbatch were not transferred into the PLLA matrix. Due to a low miscibility of PCL and PLLA, MMT remained in the phase-separated masterbatch domains. The stress-strain characteristics of PLLA nanocomposites, Young modulus E, yield stress σ_y and yield strain ε_y, decreased with increasing MMT concentration, which is associated with the increase in PCL content. The expected stiffening effect of MMT was low due to a low aspect ratio of its particles and was obscured by both plastifying effects of PCL and low PLLA crystallinity. Interestingly, in contrast to the neat PLLA, ductility was enhanced in all PLLA/Cloisite 30B materials and in PLLA/masterbatch nanocomposites with low MMT concentrations.     

Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

The Role of Organomodified Different LDHs on Recycled Poly(ethylene terephthalate) Nanocomposites

Recycled poly(ethylene terephthalate)/organomodified‐layered double hydroxide (PET /organo‐LDH ) nanocomposites were successfully synthesized via a melt‐extrusion method. In an attempt to improve the compatibility with PET , LiAl , MgAl , and ZnAl LDH surfaces were modified with sulfanilic acid (SAS ) via electrostatic interaction with LDH cationic layers. In PET nanocomposites containing SAS ‐modified LDH , the (00l ) X‐ray diffraction (XRD ) peaks originating from organo‐LDH were not observed, indicating that the organomodified LDH layers were fully exfoliated and homogeneously dispersed within the PET matrix, which was also confirmed by transmission electron microscopy analysis. However, PET nanocomposites containing SAS ‐modified LiAl , MgAl , and ZnAl LDH showed broad (00l ) XRD peaks, indicating that the organo‐LDH was partially exfoliated. Thermogravimetric analysis confirmed that the thermal stability of PET/SAS‐modified LDH was significantly improved, depending on the type and loading content of SAS‐modified LDH compared to that of pristine PET . PET nanocomposites containing well‐dispersed SAS‐modified LDH showed substantial enhancement of the storage modulus.     

PREPARATION AND CHARACTERIZATION OF SOY PROTEIN ISOLATE(SPI)/MONTMORILLONITE(MMT) BIONANOCOMPOSITES

 The bionanocomposites of soy protein isolate (SPI)/montmorillonite (MMT) have been prepared successfully via simple melt mixing, in which MMT was used as nanofiller and glycerol was used as plasticizer. Their structures and properties were characterized with X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), thermogravimetric analysis and tensile testing. XRD、TEM and SEM results indicated that the MMT layers could be easily intercalated by the SPI matrix even by simple melt processing. The exfoliated MMT layers were randomly dispersed in the protein matrix as MMT content was low (less than 5 wt%), an incomplete exfoliation was evident from SEM results, and some primary particles were observed as the MMT content was high (from 5 wt% to 9 wt%). A significant improvement of the mechanical strength and thermal stability of SPI/MMT nanocomposites has been achieved. Our work suggests that simple melt processing is an efficient way to prepare SPI/MMT nanocomposites with exfoliated structure.     

In situ preparation of hetero-polymers/clay nanocomposites by CUAAC click chemistry

A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N₃) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using ¹H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/intercalated morphologies. In addition, the increase of MMT-N₃ loading not only improved the onset and maximum degradation temperatures of the nanocomposites but also their char yields. Furthermore, the incorporation of MMT-N₃ in the polymer matrix did not significantly influence the crystallization behavior of both PEG and PCL segments.     

Isothermal crystallization behavior of exfoliated‐PP/IMMT nanocomposites via in situ polymerization

Highly exfoliated isotactic‐polypropylene/alkyl‐imidazolium modified montmorillonite (PP/IMMT) nanocomposites have been prepared via in situ intercalative polymerization. TEM and XRD results indicated that the obtained composites were highly exfoliated PP/IMMT nanocomposites and the average thickness of IMMT in PP matrix was less than 10 nm, and the distance between adjacent IMMT particles was in the range of 20–200 nm. The isothermal crystallization kinetics of highly exfoliated PP/IMMT nanocomposites were investigated by using differential scanning calorimeter(DSC) and polarized optical microscope (POM). The crystallization half‐time t_1/2, crystallization peak time t_max, and the Avrami crystallization rate constant K_n showed that the nanosilicate layers accelerate the overall crystallization rate greatly due to the nucleation effect, and the crystallization rate was increased with the increase in MMT content. Meanwhile, the crystallinity of PP in nanocomposites decreased with the increase in clay content which indicated the PP chains were confined by the nanosilicate layers during the crystallization process. Although the well‐dispersed silicate layers did not have much influence on spherulites growth rate, the nucleation rate and the nuclei density increased significantly. Accordingly, the spherulite size decreased with the increase in MMT content. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2215–2225, 2009     

Multiple melting and crystallization of nylon‐66/montmorillonite nanocomposites

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with organically modified montmorillonite (MMT). The organic MMT layers were exfoliated in a nylon‐66 matrix as confirmed by wide‐angle X‐ray diffraction (WAXD) and transmission electron microscopy. The presence of MMT layers increased the crystallization temperature of nylon‐66 because of the heterogeneous nucleation of MMT. Multiple melting behavior was observed in the nylon‐66/MMT nanocomposites, and the MMT layers induced the formation of form II spherulites of nylon‐66. The crystallite sizes L₁₀₀ and L₀₁₀ of nylon‐66, determined by WAXD, decreased with an increasing MMT content. High‐temperature WAXD was performed to determine the Brill transition in the nylon‐66/MMT nanocomposites. Polarized optical microscopy demonstrated that the dimension of nylon‐66 spherulites decreased because of the effect of the MMT layers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2861–2869, 2003     

辐照法制备PVAc/蒙脱土纳米复合材料及其表征

蒙脱土有机化后 ,片层结构间距离增大 ,对有机物的亲和性有所增强 .采用VAc单体渗入有机化蒙脱土层间 .经γ 射线辐照引发原位插层聚合 ,使蒙脱土片层结构发生剥离 ,形成无机 有机纳米复合材料 .并用X衍射、红外光谱、扫描电镜以及透射电镜等现代测试手段对复合材料进行了表征     

A novel method for preparation of exfoliated UV-curable polymer/clay nanocomposites

The half adduct of isophorone diisocyanate and 2-hydroxyethyl acrylate (IPDI-HEA), as a reactive organic modifier, was used to functionalize Na-montmorillonite (Na-MMT) clay. Unlike the electronic interaction in the conventional cation-exchange method, the driving force for the organic modification came from the chemical reaction between IPDI-HEA and framework hydroxyl groups on the surface of clay. With high degree of organic modification (48%), the d-spacing of clay layer was greatly enlarged to 3.32 nm, and the clay became more organophilic. After in situ photopolymerization among the IPDI-HEA grafted MMT clay, monomers and oligomers, the exfoliated polymer/clay nanocomposites were obtained. X-ray diffraction and transmission electron microscopy were used to detect the structure and morphology of the clay dispersed in the polymer matrix. Compared with the pure polymer materials, the exfoliated polymer/clay nanocomposites exhibited enhancements in mechanical and thermal properties.     

蒙脱土负载型引发剂的制备及在苯乙烯乳液聚合中的应用

通过正离子交换将引发剂AIBA负载在蒙脱土上制得负载型引发剂V50-MMT.进而采用原位乳液聚合方法引发苯乙烯聚合制备PS/MMT纳米复合材料.采用XRD、TGA、DSC、TEM和抽提等方法对负载型引发剂和纳米复合材料进行了表征.结果表明,负载过程中引发剂AIBA进入了MMT的片层之间;聚合过程中介于片层间的引发剂因发生分解一方面产生自由基引发St聚合,另一方面MMT发生了剥离分散;由此法制备的PS/MMT纳米复合材料,MMT片层无规、均匀地分散于PS基体中,片层厚度在几个纳米至十几个纳米之间,长度为几十至几百个纳米不等;大量的PS链段以化学键接枝在MMT的片层上,接枝在MMT片层上的PS的分子量及其分布与游离的PS不同.     

Poly(styrene‐b‐tetrahydrofuran)/clay nanocomposites by mechanistic transformation

Synthesis of poly(styrene‐block‐tetrahydrofuran) (PSt‐b‐PTHF) block copolymer on the surfaces of intercalated and exfoliated silicate (clay) layers by mechanistic transformation was described. First, the polystyrene/montmorillonite (PSt/MMT) nanocomposite was synthesized by in situ atom transfer radical polymerization (ATRP) from initiator moieties immobilized within the silicate galleries of the clay particles. Transmission electron microscopy (TEM) analysis showed the existence of both intercalated and exfoliated structures in the nanocomposite. Then, the PSt‐b‐PTHF/MMT nanocomposite was prepared by mechanistic transformation from ATRP to cationic ring opening polymerization (CROP). The TGA thermogram of the PSt‐b‐PTHF/MMT nanocomposite has two decomposition stages corresponding to PTHF and PSt segments. All nanocomposites exhibit enhanced thermal stabilities compared with the virgin polymer segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2190–2197, 2009     

Non-isothermal crystallization kinetics of exfoliated and intercalated polyethylene/montmorillonite nanocomposites prepared by in situ polymerization

Polyethylene/montmorillonite (PE/MMT) nanocomposites, one intercalated sample with higher MMT content and one exfoliated sample with lower MMT content, were prepared by in situ polymerization using MMT-supported metallocene as catalyst. Non-isothermal crystallization behaviors of these two nanocomposites were investigated and compared. The exfoliated sample exhibits higher crystallization temperature (T_c) than the neat PE, showing nucleation effect of MMT. The intercalated sample has lower T_c than the neat PE due to the confinement of MMT. It is observed that the intercalated sample has longer induction period and faster overall crystallization rate, indicating co-existence of suppression and nucleation effects in this sample. The Avrami plots show that the crystal growth of PE in the intercalated sample is two-dimensional, while it is three-dimensional in the exfoliated sample. The crystallization activation energy of the intercalated sample is slightly smaller than that of the exfoliated sample.