Novel orange-red light-emitting polymers with cyclometaled iridium complex grafted in alkyl chain

Novel poly(fluorene-alt-carbazole) (PFCz) based copolymers with 3,6-carbazole-N-alkyl grafted iridium complex using 2,3-diphenylpyrazine as ligand (IrBpz) were synthesized by Suzuki polycondensation. The emission of host polymer, PFCz, was completely quenched when the copolymer with 1 mol% of iridium complex. An orange-red emission with CIE coordinate of (0.56, 0.42) was observed from Phosphorescent polymer light-emitting diodes (PhPLEDs). The PhPLEDs made by this copolymer-iridium complex showed a maximum luminous efficiency (LE) of 5.58 cd/A and a maximal luminance of 8625 cd/m². White light with CIE coordinate of (0.33, 0.27) was observed from white PhPLEDs (WPhPLEDs) made by the copolymer containing 0.4 mol% iridium complex. A LE of 2.30 cd/A with luminance of 2068 cd/m² was observed from WPhPLEDs.     

Simultaneous determination of herbicide mefenacet and its metabolites residues in river water by solid phase extraction and rapid resolution liquid chromatography-mass spectrometry with pre-column derivatization

A procedure based on solid phase extraction (SPE) has been developed for the simultaneous pre-concentration of herbicide mefenacet (MN) and its three photolysis degradation products. Three metabolites studied were hydroxylbenzothiazole (HBT), N-methylaniline (N-MA) and 2-benzothiazoloxyacetic acid (2-BAA). A trimethylsilylation derivatization method was applied for the analysis of HBT and 2-BAA which were derivatized to be corresponding derivatives D-1 and D-2, respectively, and a rapid resolution liquid chromatography-electrospray ionization mass spectrometry (RRLC-ESI-MS) system was used for the separation, identification and quantification of these four analytes. In the SPE pre-concentration step, three types of cartridges and four kinds of eluents were investigated. The mean recoveries of these four analytes were between 78.6% and 101.2% and relative standard deviations were between 3.2% and 9.2%. The limits of detection (LODs) obtained were 0.02 ng l⁻¹ for MN and N-MA and 0.1 ng l⁻¹ for HBT and 2-BAA which were less than the maximum residue limits (MRLs) in drinking water established by European legislation (0.1 μg l⁻¹). The proposed method was applied to evaluate the presence and evolution with time of herbicide mefenacet and its degradation products in samples of Songhuajiang River of Heilongjiang province, China. The analyses, conducted from April to July of 2008, pointed to the presence of MN, 2-BAA, HBT and N-MA at maximum levels 1.0, 0.08, 0.1 and 0.3 μg l⁻¹.     

Application of heteroleptic iridium complexes with fluorenyl-modified 1-phenylisoquinoline ligand for high-efficiency red polymer light-emitting devices

A series of new heteroleptic iridium complexes bearing fluorenyl-modified 1-phenylisoquinoline as the first ligand and different ancillary ligands has been prepared and characterized. These complexes bis(1-(3-(9,9-dimethyl-fluoren-2-yl)phenyl)isoquinoline-C2,N′)iridium(III)acetylacetonate(Ir(DMFPQ)₂acac)), bis(1-(3-(9,9-dimethyl-fluoren-2-yl)phenyl)isoquinoline-C2,N′)iridium(III)(3-(pyridin-2-yl)-1,2,4-triazolate)(Ir(DMFPQ)₂pt) and bis(1-(3-(9,9-dimethyl-fluoren-2-yl)phenyl)isoquinoline-C2,N′)iridium(III)(2-(2-pyridyl)benzimidazolate)(Ir(DMFPQ)₂pbi) showed red phosphorescent emissions of 615-630 nm in dichloromethane solution. The device fabricated with these complexes doped into a host polyfluorene (PFO) blend with 30% of an electron transport material 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) showed high device efficiencies. Ir(DMFPQ)₂acac exhibited red emission with an external quantum efficiency(η_ext) of 14.3% and luminous efficiency(η_c) of 7.8 cd/A at 1.2 mA/cm² and the maximum brightness reached 10 006 cd/m² (Commission Internationale de I’Eclairage(CIE) chromaticity coordinates: (0.67, 0.32)) at 412 mA/cm². Ir(DMFPQ)₂pt showed a η_ext of 13.0% and η_c of 9.2 cd/A at 17 mA/cm², 1532 cd/m², and the maximum brightness reached 15085 cd/m² (CIE: 0.64, 0.34) at 360 mA/cm².     

Novel cyclopenta[def]phenanthrene based blue emitting oligomers for OLEDs

Novel blue emitters, oligo-MCPPs (tri-MCPP, tetra-MCPP, and penta-MCPP), have been synthesized and characterized. The introduction of cyclopenta[def]phenanthrene (CPP) units into the structure of oligo-MCPPs gave LEDs with high efficiency and pure blue emission. UV-visible absorption spectra of the thin films of these compounds appear at 333-354 nm, and their maximum PL emission at 416-447 nm. Multilayer organic EL devices with oligo-MCPPs as an emitting layer showed the turn-on voltage of about 4.8 V, the maximum brightness of 1076 cd/m² (at 8.2 V), the maximum luminescence efficiency of 0.81 cd/A, and the CIE coordinates of (0.17, 0.14) with blue color.     

New platinum(II) complexes as triplet emitters for high-efficiency monochromatic pure orange electroluminescent devices

New multi-component orange phosphorescent platinum complexes [Pt(L)(acac)] (Hacac = acetylacetone, HL = (9,9-diethyl-7-pyridin-2-ylfluoren-2-yl)diphenylamine 1, (9,9-diethyl-7-pyridin-2-ylfluoren-2-yl)di(p-tolyl)amine 2) were prepared and characterized by spectroscopic and X-ray crystallographic methods. We report the redox and photophysical properties of 1 and 2 and compare these results with the unsubstituted analogue [Pt(L)(acac)] (HL = 9,9-diethyl-2-pyridin-2-ylfluorene 3). Efficient pure orange-emitting organic light-emitting devices (OLEDs) based on 1 were fabricated. The device performance with 3,5-dicarbazolylbenzene (mCP) as the host can furnish maximium external quantum, current and power efficiencies of 4.65%, 11.75 cd/A and 5.27 lm/W at 7 V, respectively. The device with 4,4′-N,N′-dicarbazolebiphenyl (CBP) as the host can perform better with peak external quantum and current efficiencies of 6.64% and 15.41 cd/A at 7.5 V and a power efficiency of 7.07 lm/W at 6.5 V. Unlike the OLEDs made from other cyclometalated Pt(β-diketonato) complexes in which the electroluminescence spectra generally displayed both the monomeric and excimeric emissions with different relative intensities upon variation of dopant concentration, our devices emit a strong pure orange light with stable CIE color coordinates. From a steric point of view, no evidence of low-energy aggregate emission is observed for a doping level up to 12 wt.%. The present work confers a good platform for the realization of robust triplet emitters in the fabrication of highly efficient monochromatic OLEDs through the design of multifunctional chelating ligands.     

Effects of low-level gamma irradiation on the characteristics of fermented pork sausage during storage

The effect of gamma irradiation (0.5, 1, 2, and 4 kGy) on the quality of vacuum-packaged dry fermented sausages during refrigerated storage was evaluated. At Day 0 of irradiation, the pH, redness (CIE a^?), yellowness (CIE b^?), 2-thiobarbituric acid-reactive substances (TBARS) and volatile basic nitrogen (VBN) values of samples irradiated at 2 and 4 kGy were higher (p<0.05), but the CIE L^? values (lightness) were lower than those of the non-irradiated control (p<0.05). At<1 kGy irradiation, however, the pH, CIE L^?, CIE a^? and CIE b^?-value of samples were not significantly influenced by irradiation. The CIE a^?, and CIE b^?-values of samples irradiated at 2 and 4 kGy decreased with the increase of storage time. The VBN, TBARS, and CIE L^?-values of samples irradiated at 4 kGy were not changed significantly during refrigerated storage for 90 days (p>0.05). The total plate counts (TPC) and lactic acid bacteria (LAB) in the samples irradiated at 4 kGy were significantly lower (p<0.01) than those with lower irradiation doses. At the end of storage, the TPC, coliform, and LAB in the samples were not increased after irradiation at 1, 0.5 and 1 kGy, respectively. TPC and LAB were not detected in samples irradiated at 4 kGy at Day 90. In addition, no coliform bacteria were found in samples irradiated at 1 kGy during refrigerated storage. Sensory evaluation indicated that the rancid flavor of samples irradiated at 4 kGy was significantly higher, but aroma and taste scores were lower than those of the control at Day 3 of storage. Irradiation of dry fermented sausages at 2 kGy was the best conditions to prolong the shelf-life and decrease the rancid flavor without significant quality deterioration.     

Synthesis of regio- and stereoselective alkoxy-substituted spirobifluorene derivatives for blue light emitting materials

Three new octyloxy substituted spirobifluorenes, 2,7-diphenyl-3′,6′-bis(octyloxy)-9,9′-spirobifluorene (DPBSBF, 1a), 2,7-dibiphenyl-3′,6′-bis(octyloxy)-9,9′-spirobifluorene (DBBSBF, 1b) and 2,7-diterphenyl-3′,6′-bis(octyloxy)-9,9′-spirobifluorene (DTBSBF, 1c) were prepared. All the compounds had been fully characterized by ¹H and ¹³C NMR, UV-Vis, DSC, mass spectrometry and gave satisfactory elemental analyses. They possessed good solubility in common organic solvents and good homogeneous film formation. The optical energy band gap of DBBSBF was 3.27 eV between the HOMO energy level, 5.85 eV, measured by UPS and the LUMO, 2.58 eV, calculated from absorption spectrum. A blue organic light emitting diode (OLED) based on the structure of ITO/TPD (60 nm)/DBBSBF (40 nm)/Alq₃ (20 nm)/LiF (1 nm)/Al (100 nm) showed good performance. The luminance of 3125 cd/m² was observed at a drive voltage of 12.8 V and the colour coordinate in CIE chromaticity was (0.14, 0.12). The external quantum efficiency was obtained to be 2.8% at 100 cd/m².     

Novel iridium complexes as high-efficiency yellow and red phosphorescent light emitters for organic light-emitting diodes

A series of novel biscyclometallated iridium complexes based on spirobifluorene ligands and acetyl acetonate (acac) ancillary ligands have been synthesized and characterized. Their electrochemical properties were investigated by cyclic voltammetry (CV). HOMO, LUMO, and energy band gaps of all the complexes were calculated by the combination of UV-vis absorption spectra and CV results. TGA and DSC results indicated their excellent thermal stability and amorphous structure. All the iridium complexes were fabricated into organic light-emitting devices with the device configuration of ITO/PEDOT:PSS (50 nm)/PVK (50 wt %):PBD (40 wt %):Ir complex (10 wt %) (45 nm)/TPBI (40 nm)/LiF (0.5 nm)/Ca (20 nm)/Ag (150 nm). Yellow to red light emission has been achieved from the iridium complexes guest materials. Complex C1 (yellow light emission) achieved an efficiency of 36.4 cd/A (10.1%) at 198 cd/m² and complex C4 (red light emission) reached external quantum efficiency of 4.6%. The slight decrease of external quantum efficiency at high current density revealed that the triplet-triplet (T₁-T₁) annihilation was effectively suppressed by the new developed complexes.     

Oligofluorene-based push-pull type functional materials for blue light-emitting diodes

A series of new oligofluorene-based push-pull type blue light-emitting functional materials, namely, 2-(9H-carbazole-9-yl)-7-(4-cyanophenyl)-9,9-dihexylfluorene (F1), 7-(9H-carbazol-9-yl)-7′-(4-cyanophenyl)-2,2′-bi(9,9-dihexylfluorene) (F2), 7-(9H-carbazole-9-yl)-7″-(4-cyanophenyl)-2,2′:7′,2″-ter(9,9-dihexylfluorene) (F3), and 7-(9H-carbazole-9-yl)-7″′-(4-cyanophenyl)-2,2′:7′,2″:7″,2″′-quarter(9,9-dihexylfluorene) (F4) were synthesized and characterized. Their onset decomposition temperatures for the thermal bond cleavage and the glass-transition temperatures were in general increased with increasing number of fluorene units. In dilute toluene solution, the oligofluorenes exhibited main absorption peaks in the range of 343-370 nm, photoluminescence maxima from 403 to 410 nm, and absolute quantum yields (Φ_PLs) of higher than 87%. In contrast, the absorption spectra of these compounds in the thin films had no large differences from those in the solutions except for the slight peak red-shifts (2-8 nm). The main emission maxima of F1, F2, and F3 in the thin films were located at 418-420 nm, while the main emission of F4 was found to be shifted to 446 nm, followed by a shoulder peak at 421 nm. The Φ_PLs of these thin films were estimated in the range of 59.2-68.7%. The existence of the electron-pull and -push end groups could effectively tune the energy levels of the oligofluorenes. By using the organic light emitting device (OLED) configuration of ITO/PEDOT:PSS/oligofluorenes/TPBi/LiF/Al by solution-process, F4 displayed the best performance: the lowest turn-on voltage (4.1 V) and highest maximum luminance (2180 cd/m²) with maximal current efficiency of 1.17 cd/A. When F4 was fabricated into the optimized device of ITO/MoO₃/NPB/CBP:F4(1:4)/TPBi/LiF/Al by vapor deposition, highest brightness of 5135 cd/m² and current efficiency of 1.76 cd/A were achieved with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.16, 0.09).     

Synthesis, characterization and electrophosphorescent properties of mononuclear platinum(II) complexes based on 2-phenylbenzoimidazole derivatives

The rational design, synthesis and characterization of five phosphorescent platinum complexes [(C^N)Pt(acac)] [Hacac = acetylacetone, HC^N = 1-methyl-2-(4-fluorophenyl)benzoimidazole (H-FMBI), 1-methyl-2-phenylbenzoimidazole (H-MBI), 1,2-diphenyl-benzoimidazole (H-PBI), 1-(4-(3,6-di-t-butylcarbazol-9-yl))phenyl-2-phenylbenzoimidazole (t-BuCz-H-PBI), and 1-(4-(3,6-di-(3,6-di-t-butyl-carbazol-9-yl))carbazol-9-yl)phenyl-2-phenylbenzoimidazole (t-BuCzCz-H-PBI)] have been discussed. The crystal structure of (MBI)Pt(acac) shows a nearly ideal square planar geometry around Pt atom and the weak intermolecular interactions with π-π spacing of 3.55 Å. All of the complexes emit green phosphorescence from the metal-to-ligand charge-transfer (MLCT) excited state with high quantum efficiency (0.08-0.17) at room temperature. A multilayer organic light-emitting diode (OLED) with (MBI)Pt(acac) as phosphorescent dopant was fabricated using the method of high-vacuum thermal evaporation, which gives a maximum brightness, luminous and power efficiency of 13 605 cd/m², 15.1 cd/A and 4.3 lm/W, respectively. In contrast, the comparable performance can be achieved in the solution-processed OLED based on (t-BuCzPBI)Pt(acac) with a peak brightness, luminous and power efficiency of 13 606 cd/m², 17.5 cd/A and 8.4 lm/W, respectively. The better device efficiency results from the good square plane of central Pt coordination unit and the inhibition of the aggregates due to bulky and rigid t-butylcarbazole dendrons.     

Synthesis of a highly phosphorescent emitting iridium(III) complex and its application in OLEDs

A rigid ligand benzo[de]benzo[4,5]imidazo[2,1-α]isoquinolin-7-one (biio) was designed and conveniently synthesized, and the corresponding bis-cyclometalated iridium complex (biio)₂Ir(acac) (acac = acetylacetone) was prepared. The light emitting and electrochemical properties of this complex were studied. The complex has the characters of simply synthetic procedure and strong phosphorescence. The electroluminescent device using this complex as dopant was fabricated. The device had the structure of ITO/NPB (40 nm)/Ir complex:CBP (7%, 30 nm)/BCP (15 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al (100 nm). The maximum emission of the device was at 496 nm. The maximum brightness of the device can reach 79640 cd m⁻² with an external quantum efficiency of 12.1% and a maximum current efficiency of 31.7 cd A⁻¹.     

Highly efficient phosphorescent iridium (III) diazine complexes for OLEDs: Different photophysical property between iridium (III) pyrazine complex and iridium (III) pyrimidine complex

The synthesis and luminescence of four new iridium (III) diazine complexes (1-4) were investigated. HOMO and LUMO energy levels of the complexes were estimated according to the electrochemical performance and the UV-Vis absorption spectra, showing the pyrimidine complexes have a larger increase for the LUMO than the HOMO orbital in comparison with the pyrazine complexes. Several high-efficiency yellow and green OLEDs based on phosphorescent iridium (III) diazine complexes were obtained. The devices emitting yellow light based on 1 with turn-on voltage of 4.1 V exhibited an external quantum efficiency of 13.2% (power efficiency 20.3 lm/W), a maximum current efficiency of 37.3 cd/A. The electroluminescent performance for the green iridium pyrimidine complex of 3 is comparable to that of the iridium pyridine complex (PPY)₂Ir(acac) (PPY = 2-phenylpyridine), which is among the best reported.     

Speciation analysis of mercury in sediments, zoobenthos and river water samples by high-performance liquid chromatography hyphenated to atomic fluorescence spectrometry following preconcentration by solid phase extraction

A high-pressure microwave digestion was applied for microwave-assisted extraction (MAE) of mercury species from sediments and zoobenthos samples. A mixture containing 3 mol L⁻¹ HCl, 50% aqueous methanol and 0.2 mol L⁻¹ citric acid (for masking co-extracted Fe³⁺) was selected as the most suitable extraction agent. The efficiency of proposed extraction method was better than 95% with R.S.D. below 6%. A preconcentration method utilizing a “homemade” C18 solid phase extraction (SPE) microcolumns was developed to enhance sensitivity of the mercury species determination using on-column complex formation of mercury-2-mercaptophenol complexes. Methanol was chosen for counter-current elution of the retained mercury complexes achieving a preconcentration factor as much as 1000. The preconcentration method was applied for the speciation analysis of mercury in river water samples. The high-performance liquid chromatography-cold vapour atomic fluorescence spectrometric (HPLC/CV-AFS) method was used for the speciation analysis of mercury. The complete separation of four mercury species was achieved by an isocratic elution of aqueous methanol (65%/35%) on a Zorbax SB-C18 column (4.6 mm × 150 mm, 5 μm) using the same complexation reagent (2-mercaptophenol). The limits of detection were 4.3 μg L⁻¹ for methylmercury (MeHg⁺), 1.4 μg L⁻¹ for ethylmercury (EtHg⁺), 0.8 μg L⁻¹ for inorganic mercury (Hg²⁺), 0.8 μg L⁻¹ for phenylmercury (PhHg⁺).     

Potentialities of two solventless extraction approaches—Stir bar sorptive extraction and headspace solid-phase microextraction for determination of higher alcohol acetates, isoamyl esters and ethyl esters in wines

A stir bar sorptive extraction with liquid desorption followed by large volume injection coupled to gas chromatography-quadrupole mass spectrometry (SBSE-LD/LVI-GC-qMS) was evaluated for the simultaneous determination of higher alcohol acetates (HAA), isoamyl esters (IsoE) and ethyl esters (EE) of fatty acids. The method performance was assessed and compared with other solventless technique, the solid-phase microextraction (SPME) in headspace mode (HS). For both techniques, influential experimental parameters were optimised to provide sensitive and robust methods. The SBSE-LD/LVI methodology was previously optimised in terms of extraction time, influence of ethanol in the matrix, liquid desorption (LD) conditions and instrumental settings. Higher extraction efficiency was obtained using 60 min of extraction time, 10% ethanol content, n-pentane as desorption solvent, 15 min for the back-extraction period, 10 mL min⁻¹ for the solvent vent flow rate and 10 °C for the inlet temperature. For HS-SPME, the fibre coated with 50/30 μm divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) afforded highest extraction efficiency, providing the best sensitivity for the target volatiles, particularly when the samples were extracted at 25 °C for 60 min under continuous stirring in the presence of sodium chloride (10% (w/v)). Both methodologies showed good linearity over the concentration range tested, with correlation coefficients higher than 0.984 for HS-SPME and 0.982 for SBES-LD approach, for all analytes. A good reproducibility was attained and low detection limits were achieved using both SBSE-LD (0.03-28.96 μg L⁻¹) and HS-SPME (0.02-20.29 μg L⁻¹) methodologies. The quantification limits for SBSE-LD approach ranging from 0.11 to 96.56 μg L⁻and from 0.06 to 67.63 μg L⁻¹ for HS-SPME. Using the HS-SPME approach an average recovery of about 70% was obtained whilst by using SBSE-LD obtained average recovery were close to 80%. The analytical and procedural advantages and disadvantages of these two methods have been compared.Both analytical methods were used to determine the HAA, IsoE and EE fatty acids content in “Terras Madeirenses” table wines. A total of 16 esters were identified and quantified from the wine extracts by HS-SPME whereas by SBSE-LD technique were found 25 esters which include 2 higher alcohol acetates, 4 isoamyl esters and 19 ethyl esters of fatty acids. Generally SBSE-LD provided higher sensitivity with decreased analysis time.     

Determination of 16 polycyclic aromatic hydrocarbons in environmental water samples by solid-phase extraction using multi-walled carbon nanotubes as adsorbent coupled with gas chromatography–mass spectrometry

A solid-phase extraction (SPE) using multi-walled carbon nanotubes (MWCNTs) as adsorbent coupled with gas chromatography–mass spectrometry (GC–MS) method was developed for the determination of 16 polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. Several condition parameters, such as extraction adsorbents, elution solvents and volumes, and sample loading flow rate and volume were optimized to obtain high SPE recoveries and extraction efficiency. 150 mg MWCNTs as sorbent presented high extraction efficiency of 16 PAHs due to the large specific surface area and high adsorption capacity of MWCNTs compared with the commercial C18 column (250 mg/2 mL). The calibration curves of 16 PAHs extracted were linear in the range of 20–5000 ng L⁻¹, with the correlation coefficients (r²) between 0.9848 and 0.9991. The method attained good precisions (relative standard deviation, RSD) from 1.2% to 12.1% for standard PAHs aqueous solutions; method recoveries ranged in 76.0–125.5%, 74.5–127.0%, and 70.0–122.0% for real spiked samples from river water, tap water and seawater, respectively. Limits of detection (LODs, S/N = 3) of the method were determined from 2.0 to 8.5 ng L⁻¹. The optimized method was successfully applied to the determination of 16 PAHs in real environmental water samples.     

Synthesis and photovoltaic performances of donor-π-acceptor dyes utilizing 1,3,5-triazine as π spacers

A series of new-type of donor-π-acceptor dyes (TCT-1-6) utilizing 1,3,5-triazine as π spacers were synthesized. These dyes were characterized by ¹H NMR, ESI-MS, EA, and X-ray crystallography. Their photovoltaic performances were also investigated. An overall photon-to-electron conversion efficiency of 1.8% was achieved with the DSSC based on the dye TCT-1(J_sc = 3.33 mA/cm², V_oc = 757 mV, FF = 71.8%) under AM 1.5G illumination (100 mW/cm²).     

Solid phase microextraction using new sol–gel hybrid polydimethylsiloxane-2-hydroxymethyl-18-crown-6-coated fiber for determination of organophosphorous pesticides

A new sol–gel hybrid coating, polydimethylsiloxane–2-hydroxymethyl-18-crown-6 (PDMS–2OHMe18C6) was prepared in-house for use in solid phase microextraction (SPME). The three compositions produced were assessed for its extraction efficiency towards three selected organophosphorus pesticides (OPPs) based on peak area extracted obtained from gas chromatography with electron capture detection. All three compositions showed superior extraction efficiencies compared to commercial 100 μm PDMS fiber. The composition showing best extraction performance was used to obtain optimized SPME conditions: 75 °C extraction temperature, 10 min extraction time, 120 rpm stirring rate, desorption time 5 min, desorption temperature 250 °C and 1.5% (w/v) of NaCl salt addition. The method detection limits (S/N = 3) of the OPPs with the new sol–gel hybrid material ranged from 4.5 to 4.8 ng g⁻¹, which is well below the maximum residue limit set by Codex Alimentarius Commission and European Commission. Percentage recovery of OPPs from strawberry, green apple and grape samples with the new hybrid sol–gel SPME material ranged from 65 to 125% with good precision of the method (%RSD) ranging from 0.3 to 7.4%.     

Development and application of immunoaffinity column chromatography for atrazine in complex sample media

A rabbit antibody immunoaffinity (IA) column procedure was evaluated as a cleanup method for the determination of atrazine in soil, sediment, and food. Four IA columns were prepared by immobilizing a polyclonal rabbit anti-atrazine antibody solution to HiTrap Sepharose columns. Atrazine was bound to the IA columns when the loading solvents were either 100% water, 2% acetonitrile in water, or 10% methanol in phosphate buffered saline (PBS). Quantitative removal of atrazine from the IA columns was achieved with elution solvents of either 70% ethanol in water, 70% methanol in water, or 100% methanol. One control column was prepared using nonspecific rabbit IgG antibody. This control column did not retain any applied atrazine indicating atrazine did not bind indiscriminately to protein or the Sepharose support. The four IA columns showed reproducible coupling efficiency for the immobilization of the atrazine antibody and consistent binding and releasing of atrazine. The coupling efficiency (4.25 mg of antibody in 1 mL of resin bed) for the four IA columns ranged from 93 to 97% with an average of 96 ± 2% (2.1%). Recoveries of the 500, 50, and 5 ng mL⁻¹ atrazine standard solutions from the four IA columns were 107 ± 7% (6.5%), 122 ± 14% (12%), and 114 ± 9% (8.0%) respectively, based on enzyme-linked immunosorbent assay (ELISA) data. The maximum loading was approximately 700 ng of atrazine for each IA column (∼0.16 μg of atrazine per mg of antibody). The IA columns could withstand 100% methanol as the elution solvent and could be reused more than 50 times with no change in performance. The IA columns were challenged with soil, sediment, and duplicate-diet food samples and effectively removed interferences from these various matrices for subsequent gas chromatography/mass spectrometry (GC/MS) or ELISA analysis. The log-transformed ELISA and GC/MS data were significantly correlated for soil, sediment and food samples although the ELISA values were slightly higher than those obtained by GC/MS. The IA column cleanup procedure coupled with ELISA analysis could be used as an alternative effective analytical method for the determination of atrazine in complex sample media such as soil, sediment, and food samples.     

Approach for rapid extraction and speciation of mercury using a microtip ultrasonic probe followed by LC-ICP-MS

A fast method for mercury extraction from biological samples based on the use of HCl leaching plus different enzymatic hydrolysis (with and without mercury complexing agents), and the use of focussed ultrasounds (2-mm microtip) is here proposed. Total mercury content in several biological samples was determined by FI-ICP-MS using a carrier solution consisting of 0.1% (v/v) HCl, 0.1% (v/v) 2-mercaptoethanol, to avoid memory effect, and 0.15% (w/v) KCl. For mercury speciation a RP18 chromatographic column coupled to ICP-MS was used. A mobile phase consisting of 0.1% (v/v) formic acid, 0.1% (v/v) HFBA, 2% (v/v) methanol, and 0.02% (w/v) mM l-cysteine at pH 2.1 was used for chromatographic separation of the mercury species in the sample extracts. Extraction procedures were validated by using 50 mg of tuna fish tissue CRM-463 (2.85 ± 0.16 mg kg⁻¹ for methylmercury). The recoveries obtained were 99 ± 3% and 93 ± 1% after acid leaching (HCl 7 M) and enzymatic extraction (15 mg protease type XIV in 2.5% (v/v) 2-mercaptoethanol), respectively. The optimal sonication conditions (5 min of exposure time and 40% of ultrasound amplitude) were applied to 5 mg of CRM-463 (88 ± 5%), 5 mg of mussel tissue (81 ± 11%) and to 2 mg of zebra fish embryos (90 ± 10%) obtaining good recoveries in all cases. Methylmecury was found to be the most abundant Hg specie in all samples. The developed method is simple and rapid (5 min sample treatment); it is suitable for very small samples and does not alter the original form of the mercury species. Thus, it is of special interest in those cases in which validation of the results may often be hampered by lack of sample availability.     

Taguchi OA16 orthogonal array design for the optimization of cloud point extraction for selenium determination in environmental and biological samples by tungsten-modified tube electrothermal atomic absorption spectrometry

Orthogonal array design (OAD) was applied for the first time to optimize cloud point extraction (CPE) conditions for Se(IV) determination by electrothermal atomic absorption spectrometry (ETAAS) in environmental and biological samples. Selenium was reacted with o-phenylenediamine to form piazselenol in an acidic medium (pH 2). Using Triton X-114, as surfactant, piazselenol was quantitatively extracted into small volume (about 30 μL) of the surfactant-rich phase after centrifugation. Five relevant factors, i.e. surfactant concentration, pH, ionic strength, equilibrium time and temperature were selected and the effects of each factor were studied at four levels on the extraction efficiency of Se(IV) and optimized. The statistical analysis revealed that the most important factors contributing to the extraction efficiency are ionic strength, pH and percent of surfactant. Based on the results obtained from the analysis of variance (ANOVA), the optimum conditions for extraction were established as: pH 6; vial temperature = 50 °C; extraction time = 7 min and 0.3% (w/v) of Triton X-114. The method was permitted to obtain a detection limit of 0.09 ng mL⁻¹ and two linear calibration ranges from 0.6 to 1.0 and 1.0 to 80.0 ng mL⁻¹ Se. The precision (%RSD) of the extraction and determination for the six replicates of Se at 20 ng mL⁻¹ was better than 3.6% and the enrichment factor of 63.5 was achieved. The studied analyte was successfully extracted and determined with high efficiency using cloud point extraction method in water and biological matrices.