Synthesis,characterization, thermal, and optical properties of conjugated copolymers derived from phenanthrene-9,10-dione- and dibenzo[f,h]quinoxaline

Donor–acceptor (D-A) conjugated polymers bearing phenanthrene-9,10-dione and dibenzo[f,h]quinoxaline as the acceptor units were synthesized via an optimized Suzuki cross-coupling reaction. Each of the aforementioned acceptors was reacted with three different donor comonomers, namely, fluorene, carbazole, and silafluorene derivatives, bearing long alkyl chains. The resulting copolymers display excellent solubility in common organic solvents with high chemical stability, allowing for the determination of their structural, thermal, and optical properties by various analytical techniques.     

Synthesis,characterization, and thermal properties of piezoelectric polyimides

Three amorphous piezoelectric polyimides have been synthesized and characterized to analyze their utility for high‐temperature applications. The studied polyimides have been prepared from 4,4′‐oxydiphthalic anhydride and the diamines 2,4‐di(3‐aminophenoxy)benzonitrile (poly2‐4), 2,6‐bis(3‐aminophenoxy)benzonitrile (poly2‐6), and 1,3‐bis‐2‐cyano‐3‐(3‐aminophenoxy)phenoxybenzene (poly2CN). These polyimides differ in the position of the dipolar groups ? CN in the aromatic ring (poly2‐4 and poly2‐6) and in the number of these groups in the repetitive unit (poly2‐6 and poly2CN). The imidization degree has been studied by Fourier transform infrared (FTIR) and thermogravimetry‐mass spectrometry (TG‐MS) and thermal properties by differential scanning calorimetry (DSC) and thermogravimetry (TG). The piezoelectric behavior has been analyzed from remnant polarization measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 722–730, 2009     

Synthesis, characterization, and thermal properties of new silarylene-siloxane-acetylene polymers

New silarylene-siloxane-acetylene polymers have been synthesized by coupling reactions employing 1,3-bis(p-ethynylphenyl)-1,1,3,3-tetraphenyldisiloxane (3) as the key monomer. Their thermal properties have been evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). All of the new polymers showed good thermal stability, with their temperatures at 5% weight loss (T_d5) being higher than 540 °C under nitrogen and higher than 460 °C in air. Their char yields at 1000 °C under N₂ were above 80%. Broad exothermic peaks, attributable to reaction of the acetylenic units, were observed by DSC analysis in the temperature range 270-450 °C.     

Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel aromatic polymers from benzaldehyde and triphenylamine derivatives: Synthesis,electrochromic, and photochemical properties

A series of novel triphenylamine‐based polymers were synthesized from benzaldehyde and triphenylamine derivatives. All the polymers having high molecular weight are readily soluble in many organic solvents and could be solution‐cast into amorphous films. They had glass transition temperatures (T_gs) in the range of 193–217 °C, and 10% weight loss temperatures in excess of 475 °C. Cyclic voltammograms of all polymers showed reversible oxidation redox peaks and E_onset around 0.42–0.90 V, indicating that the polymers are electrochemically active and stable. In addition, all these polymers revealed photochemical characteristics in conformity with their electrochromic characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2118–2131, 2009     

新型含噻吩基8-羟基喹啉锌配合物的合成及光电性能简

设计合成了含噻吩基的新型配体(E)-2-[2-(3-噻吩基)乙烯基]-8-羟基喹啉(4)及相应的锌配合物5,产物结构经核磁共振、红外光谱和元素分析进行表征. 利用X射线单晶衍射仪测定了中间体(E)-2-[2-(3-噻吩基)乙烯基]-8-乙酰氧基喹啉(3)和配体4的单晶结构,结果表明中间体3晶体分子间并无明显的氢键作用,分子间呈交错堆叠;配体4分子之间由硫氢氧键弱作用相互排列形成网状结构. 通过核磁滴定及紫外和荧光滴定模拟了配体4在溶液中与金属锌的配位过程. 固体荧光寿命研究结果表明,配合物5的荧光寿命为18.8 ms. 通过电致发光器件研究发现,配合物5作为发光层具有良好的电致发光性能,同时具有较好的电子传输能力.     

Synthesis and characterization of 5-substituted 8-hydroxyquinoline derivatives and their metal complexes

5-Aminomethyl-8-hydroxyquinoline (QN) was synthesized as a scaffold to generate dimers, trimers, and tetramer metalloquinolates. Starting from QN, a series of 5-substituted 8-hydroxyquinoline derivatives conjugated with small bioactive molecules were synthesized. Absorption and emission spectra indicate that these QN derivatives chelate well with metal ions, which may serve as a new platform to explore the applications of metalloquinolates for a variety of potential applications.     

Synthesis and characterization of chelate polymers containing etheric diphenyl ring in the backbone: thermal,optical, electrochemical,and morphological properties

A novel Schiff base, 4‐bromo‐2‐[(2‐[(5‐bromo‐2‐hydroxyphenyl)methylene]amino‐5‐nitrophenyl)iminomethyl]phenol (M1) was synthesized from the reaction of 5‐brom‐salicylaldehyde with 4‐nitro‐o‐phenylenediamine. Schiff base–metal complex was synthesized from the reaction of 4‐bromo‐2‐[(2‐[(5‐bromo‐2‐ hydroxyphenyl)methylene]amino‐5‐nitrophenyl)iminomethyl]phenol (M1) with copper (II) acetate monohydrate [(CH₃COO)₂ Cu · H₂O] salt. Poly‐ (M1‐Cu‐TDP) was synthesized from the reaction of M1‐Cu with 4,4′‐dithiodiphenol (TDP). Poly(M1‐Cu‐PDP) was synthesized from the reaction of M1‐Cu with 4,4′‐propane‐2,2‐diyldiphenol (PDP). Poly(M1‐Cu‐HDP) was synthesized from the reaction of M1‐Cu with 4,4′‐(1,1,1,3,3,3‐hexafluoropropane‐2,2‐di‐yl)diphenol (HDP). The structures of the synthesized monomer and chelate polymers were confirmed by FT‐IR, UV–Vis, ¹H‐ and ¹³C‐NMR, and elemental analysis. The characterization was made by TGA‐DTA, DSC, size exclusion chromatography, cyclic voltammetry, and solubility tests. Also, surface morphologies of chelate polymers were investigated by scanning electron microscope. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization, thermal stability and compatibility properties of new energetic polymers

Four new cross-linked polymers poly(vinyl m-nitrobenzene)-polyglycidylazides (PVMNB-GAPs) were successfully synthesized using toluene diisocyanate as the cross-linking agent. Their structure was confirmed by their FTIR, UV–Vis, ¹H and ¹³C NMR spectroscopy. Moreover, the thermal properties of cross-linked polymers were evaluated by DTA, TGA and DSC techniques, which confirmed that synthesized polymers exhibited good resistance to thermal decomposition up to 200°C. In addition, their compatibility with the main energetic components of 2,4,6-trinitrotoluene-based melt-cast explosives were also evaluated by the non-isothermal differential thermal analysis method.     

新型含噻吩基8-羟基喹啉锌配合物的合成及光电性能

设计合成了含噻吩基的新型配体(E)-2-[2-(3-噻吩基)乙烯基]-8-羟基喹啉(4)及相应的锌配合物5, 产物结构经核磁共振、 红外光谱和元素分析进行表征. 利用X射线单晶衍射仪测定了中间体(E)-2-[2-(3-噻吩基)乙烯基]-8-乙酰氧基喹啉(3)和配体4的单晶结构, 结果表明中间体3晶体分子间并无明显的氢键作用, 分子间呈交错堆叠; 配体4分子之间由硫氢氧键弱作用相互排列形成网状结构. 通过核磁滴定及紫外和荧光滴定模拟了配体4在溶液中与金属锌的配位过程. 固体荧光寿命研究结果表明, 配合物5的荧光寿命为18.8 ms. 通过电致发光器件研究发现, 配合物5作为发光层具有良好的电致发光性能, 同时具有较好的电子传输能力.     

Preparation and characterization of thiophene copolymers with second order non-linear optical properties

Azobenzene-substituted polythiophenes were prepared by copolymerization of 3-alkylthiophenes functionalized with an azo-chromophore and 3-alkylthiophenes as plastifying comonomers to improve solubility. Monomers with different oligomethylenic spacer and alkylic chain lengths were synthesized and copolymerized via FeCl₃ oxidative polymerization. Polymer soluble fractions were characterized by ¹H and ¹³C NMR, FTIR, UV-Vis spectroscopy, and GPC, DSC and TGA. Second-order non-linear optical properties were measured by the second harmonic generation technique.     

Synthesis,characterization, crystal structure and biological activities of supramolecular compounds of Mn(II) and Zn(II) with dipicolinic acid and 8-hydroxyquinoline

Two compounds, (8-H₂Q)₂[Mn(dipic)₂] · 6H₂O (1) and (8-H₂Q)₂[Zn(dipic)₂] · 6H₂O (2) (8-HQ = 8-hydroxyquinoline (oxine), H₂dipic = dipicolinic acid), have been prepared and characterized by elemental, spectroscopic (IR and UV–Vis), and thermal analyses, magnetic measurements and single crystal X-ray diffraction techniques. Compounds 1 and 2 consist of two 8-hydroxyquinolinium cations, one bis(dipicolinato)M(II) anion (M = Mn(II) and Zn(II)) and six uncoordinated water molecules. Both 1 and 2 crystallize in the monoclinic space group C2/c. In the complex anion, each dipic ligand is tridentate through N of pyridine and oxygens of the carboxylate groups. Crystal packing of 1 and 2 is a composite of intermolecular hydrogen bonding interactions. The in vitro antibacterial and antifungal activities of 1 and 2 were evaluated by the agar well diffusion method by MIC (Minimal Inhibition Concentration), looking for compounds which display high-inhibitory effect against gram positive bacteria and fungi. No growth inhibition was observed against tested gram negative bacteria.     

Preparation,characterization and properties of fiber reinforced composites using silicon‐containing hybrid polymers

A novel glass fiber reinforced composite was prepared by using silicon‐containing hybrid polymers, poly(methylhydrogen‐diethynylsilyene) (PMES) and poly(phenylethynyl‐silyloxide‐phenylborane) (APABS), as matrix resins. The curing behavior and rheological properties of the matrix resins were investigated by differential scanning calorimetry (DSC) and rotational rheometer. The dynamic viscoelastic properties, mechanical properties, and microstructures of the composites were studied by dynamic mechanical analysis (DMA), universal testing machine (UTM), and scanning electron microscopy (SEM), respectively. The results show that the composite can be well cured between 200 and 300 °C through reactive groups like Si‐H, N‐H, and C≡C units, the possible thermosetting mechanism is also proposed. The composites exhibit excellent mechanical properties with bending strength reach up to 261 and 178 MPa before and after heat‐treating, respectively. SEM analysis clearly indicates that crack in the matrix, matrix/fiber interface debonding, and fiber pull out are predominate failure mechanism for the composites which are heat‐treated in different temperatures. All these obtained results can give theoretical guiding reference for their further applications. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,characterization, and preceramic properties of π‐conjugated polymers based on Ni(II) complexes of goedken's macrocycle

Nickel(II) complexes of Goedken's macrocycle bearing alkyne substituents were copolymerized with 2,7‐dibromo‐9,9‐dihexylfluorene, 2,5‐dibromo‐3‐hexylthiophene, and 1,4‐dibromo‐2,5‐bis(hexyloxy)benzene via microwave‐induced Sonogashira cross‐coupling reactions to produce copolymers 6F , 6T , and 6B . The spectroscopic and electrochemical properties of the copolymers were examined and compared to model compounds. Specifically, each polymer exhibited a nickel‐based absorption centered at about 589 nm and two π → π* transitions between 272 and 387 nm. While the copolymers did not exhibit extended π conjugation, the nature of the organic spacer did affect the high energy transitions. Furthermore, each copolymer underwent two ligand‐based one‐electron oxidations at potentials of about 0.24 V and about 0.75 V relative to the ferrocene/ferrocenium redox couple. Postpolymerization functionalization of the alkyne group in 6F with Co₂(CO)₈ afforded a novel heterobimetallic copolymer that yielded amorphous nanomaterials containing Ni/Co when pyrolyzed at 800 °C for 3 h under an atmosphere of N₂/H₂ (95:5). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3257–3266     

Synthesis and characterization of perfluorinated arylenevinylene polymers

Fully fluorinated arylenevinylene polymers have been synthesized via a methodology based on the Stille cross‐coupling reaction and characterized by FTIR spectroscopy and MALDI‐TOF mass spectrometry. Investigation of thin film properties by cyclic voltammetry and ellipsometry shows that complete substitution of hydrogen atoms with fluorine atoms on the conjugated backbone of the poly(arylenevinylene)s results in a strong increase of the band gap. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 285–291, 2010     

Synthesis, characterization and thermal properties of novel PMDA-PAPD/silica hybrid network polymers

Novel PMDA-PAPD/silica hybrid polymers were synthesized by the sol-gel process. Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids, (condensed siloxane bonds designated as Q¹, Q², Q³, Q⁴, wth 3-aminopropyltriethoxysilane having mono-, di-, tri-, tetra-substituted siloxane bonds is designated as T¹, T² and T³). The results revealed that Q³, Q⁴ and T³ are the major microstructure elements in forming a network structure. The surface morphology, particle size, crystallinity and the thermal stability of the hybrids were investigated using Scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). SEM and TEM revealed that the hybrids were nanocomposites. The XRD indicated that covalent bonding (Si-O-Si) between the organic and inorganic components enhanced miscibility. DSC and TGA results showed that these hybrid materials had excellent thermal stability. The heat capacities of some materials were reported for the temperature range 273 K and 363 K as no thermal anomaly was found in this temperature range.     

Synthesis,characterization of new bisphenol-based benzoxazines and the thermal properties of their polymers

Journal of Thermal Analysis and Calorimetry - New bisphenol-based benzoxazines (BBA-a and BBA-bra) were synthesized from bisphenol containing trityl group, paraformaldehyde, aniline and...     

Synthesis,characterization, thermal stability and antibacterial activity of coumarin based methacrylate copolymers

Monomer of 7-methacryloyloxy-4-methylcoumarin(MAOMC) was synthesized and characterized by FTIR, 1H-NMR and 13C-NMR spectroscopy. Copolymers of MAOMC with butoxyethylmethacrylate(BOEMA) at different feed compositions were prepared by free radical solution polymerization at(70 ± 1) °C in ethylmethylketone(EMK) using benzyl peroxide(BPO) as an initiator. The copolymers were characterized by FTIR and 1H-NMR spectroscopy. Thermogravimetric analysis(TGA) and differential scanning calorimetry(DSC) of the copolymers showed moderate thermal stability and higher Tg values. Gel permeation chromatography(GPC) was used to find out the molecular weights of the different copolymers. Antibacterial activities of the copolymers were also investigated against the selected pathogenic bacteria's. The antibacterial activity of the copolymer increases as the MAOMC content increases in the copolymer. This shows that coumarin moiety plays a very important role in the antibacterial activity.     

Synthesis,characterization, and properties of regioregular conjugated polymers containing quaterthiophene and an acceptor repeating units

Novel donor–acceptor type polymers consisting of alternating quaterthiophene and an electron withdrawing moiety, pyrazinyl or pyridinyl, have been prepared using Stille coupling approach with moderate yields. The polymers were highly soluble in common organic solvents such as tetrahydrofuran and chloroform. The structure and optical properties of the polymers were characterized by NMR, UV‐vis and fluorescence spectroscopy, and cyclic voltammetry, respectively. The polymer having pyrazine unit exhibited a red‐shift in both absorption and emission in comparison with those analogs containing pyridine because of strong electron withdrawing character of the pyrazinyl group. The polymer containing pyrazinyl as acceptor units also depicted decrease in its optical and electrochemical bandgap relative to those polymers containing 2,5‐ or 2,6‐pyridine moieties. The electrochemical behavior showed facile n‐doping and p‐doping properties of those polymers consisting of alternating quaterthiophene and the acceptor moiety. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2163–2171, 2009