In vitro degradation of porous poly(l-lactide-co-glycolide)/β-tricalcium phosphate (PLGA/β-TCP) scaffolds under dynamic and static conditions

In vitro degradation of porous poly(l-lactide-co-glycolide)/β-tricalcium phosphate (PLGA/β-TCP) scaffolds was studied by incubating the samples in phosphate buffered saline (PBS) at 37 °C and pH 7.4 under dynamic loading with respect to static conditions for 12 weeks. Under dynamic conditions, acidity of PBS was alleviated by the better solution circulation, and water absorption of the scaffolds increased more than that under static conditions in the first 8 weeks. Changes in mass, height, diameter, relative molecular mass and its distribution also happened more remarkably under dynamic conditions. Moreover, obvious cracks and a larger amount of β-TCP particles were observed on the wall of the scaffolds after degradation for 12 weeks under dynamic loading. Compressive modulus and strength showed an increase from the beginning to the 10th week but were lower after then. Results showed that degradation of PLGA/β-TCP scaffolds under dynamic conditions exhibited a significantly faster rate than that under static conditions.     

Effect of partial crosslinking on morphology and properties of the poly(β-hydroxybutyrate)/poly(d,l-lactic acid) blends

Poly(β-hydroxybutyrate) (PHB) is a bio-based and biodegradable aliphatic polyester, however its application is limited by some disadvantages such as high price, brittleness, poor processability and low melt-strength due to serious thermal degradation. Partial crosslinking initiated by dicumyl peroxide (DCP) was applied in this work to improve the performance of poly(β-hydroxybutyrate)/poly(d,l-lactic acid) (PHB/PDLLA) blends. The partial crosslinking of the blends and its effect on the properties, morphology, rheology and thermal behavior of the blends were investigated. The tensile strength and impact toughness of the PHB were increased by incorporation of the PDLLA, which were improved further after the partial crosslinking because of an increased compatibility between the PHB and the PDLLA phases. The rheological study revealed that the storage modulus (G′) and complex viscosity (η*) of the blends were increased after addition of the DCP. On the other hand, the crystallization of PHB in the blends was restricted to a certain extent by the formation of partially crosslinked network while its crystal form was not modified.     

Enzyme-catalyzed degradation of poly(l-lactide)/poly(?-caprolactone) diblock, triblock and four-armed copolymers

Poly(l-lactide)/poly(?-caprolactone) diblock, triblock and four-armed copolymers with the same monomer feed ratio (50/50) were synthesised by two step ring opening polymerisation of successively added ?-caprolactone and l-lactide, using isopropanol, ethylene glycol, or pentaerythritol as initiator and zinc lactate as co-initiator. The resulting copolymers were characterised by ¹H NMR, DSC, SEC, and FT-IR, which confirmed the blocky characteristic of the copolymers. Solution cast films were allowed to degrade at 37 °C in the presence of proteinase K, and the degradation was monitored by gravimetry, DSC, SEC, ¹H NMR and ESEM. The effects of chain structure, block length and crystallinity on the degradation are discussed. The four-armed block copolymer degrades the most rapidly, while the diblock copolymer exhibited the slowest degradation rate. The difference was related to the crystallinity depending on both the molecular structure and block length. Little compositional or molar mass changes were obtained during degradation, which strongly supports a surface erosion mechanism, in agreement with ESEM observations.     

Blends as a strategy towards tailored hydrolytic degradation of poly(?-caprolactone-co-d,l-lactide)-poly(ethylene glycol)-poly(?-caprolactone-co-d,l-lactide) co-polymers

Binary blends were prepared from poly(?-caprolactone) (PCL), and P(CL-co-d,l-lactic acid)-P(ethylene glycol)-P(CL-co-d,l-lactic acid) co-polymers, where the d,l-LA content in the side chains varied from 0 to 70 mol%. Blend discs were fabricated by melt-molding, and the effect of blend composition on hydrolytic degradation was studied. Variations in medium pH were monitored, and morphological changes were observed using scanning electron microscopy. Blending of these co-polymers was found to constitute a simple means by which intermediate rates of water absorption and mass loss were obtained, compared to those observed in pure co-polymer preparations. In one of the blends, prepared from the two components containing 70 or 0 mol% d,l-LA in the side chains and thereby exhibiting large differences in degradation rate, hydrolysis resulted in the formation of a porous material over time. Furthermore, all blend samples maintained their initial shape throughout the study. Such materials may be interesting for further investigations for applications in cellular therapy and controlled release.     

A practical synthesis of fully protected l-γ-carboxyglutamic acid

We have developed a new synthetic route for the preparation of Fmoc protected l-γ-carboxyglutamic acid in 60% overall yield (>99% ee) via a six-step synthesis from d-Garner’s aldehyde. An aldol condensation and the selective cleavage of the acetonide protective group are key steps.     

Ultrasonic degradation of poly(γ-benzyl-l-glutamate), an archetypal highly extended polymer

Ultrasonic degradation provides a convenient means of studying the degradation of macromolecules in transient elongational flows. Of particular interest, because of their being a limiting architectural case, is the degradation of highly extended polymers. A classic example of a polymer with this type of architecture is poly(γ-benzyl-l-glutamate) or PBLG. Here, we monitor results of the ultrasonic degradation of PBLG using size-exclusion chromatography with a multiplicity of physical detectors. Under the given experimental conditions, the limiting molar mass (M_lim) of PBLG was found to be approximately 114,000 g/mol. The fractal dimension of PBLG, which exemplifies the highly extended nature of the macromolecule, was measured by both light scattering and viscometric means. Results from both methods demonstrated a virtual invariance in chain conformation as a function of degradation. Additional support for these observations was provided by the dimensionless ratio of the viscometric and root-mean-square radii.     

Structure-based study of antiamyloidogenic cyclic d,l-α-peptides

Protein misfolding and aggregation are the hallmarks of many devastating diseases. We have previously shown that cyclic d,l-α-peptide CP-2 reacts and stabilizes less toxic forms of amyloid β (Aβ), and protects the cells from Aβ-induced toxicity. Here, we performed extensive structure-based studies on CP-2 to elucidate the contribution of each residue to the total antiamyloidogenic activity and determine the interactions that are involved between CP-2 and Aβ. We showed that the hydrophobicity of CP-2 analogs correlates with their antiamyloidogenic potency, however, aromatic interactions are even more important for this activity. The antiamyloidogenic activity of CP-2 analogs also correlates with their ability to self-assemble, as shown by the critical micelle concentration measurements. The cell survival studies performed on rat pheochromocytoma PC-12 cells suggest that incorporation of an additional aromatic residue to the CP-2's sequence increases its protective effect against Aβ42-induced toxicity.     

Photodegradation of biodegradable polyesters: A comprehensive study on poly(l-lactide) and poly(?-caprolactone)

The photodegradation of melt-crystallized and amorphous-made poly(l-lactide) (PLLA-C and PLLA-A, respectively) and cast-crystallized poly(?-caprolactone) (PCL) was investigated comprehensively for the periods up to 200 h using gel permeation chromatography, differential scanning calorimetry, tensile testing, and polarization optical microscopy. The photodegradation of PLLA and PCL films proceeds via a bulk erosion mechanism, indicating that UV penetrates the specimens with no significant reduction in its intensity, irrespective of the chemical structure and the crystallinity of biodegradable polyesters. The photodegradability of PCL chains was higher than that of PLLA chains. This strongly suggests that the chemical structure of the two sequential groups adjacent to the ester oxygen rather than the density of ester group is crucial to determine the photodegradability of biodegradable polyesters. Although PLLA chains are photodegradable even in the crystalline regions, their photodegradability is lower than that in the amorphous regions. The significant increase in weight-average molecular weight (M_w)/number-average molecular weight (M_n) was observed for PLLA-A and PCL films, even when the decrease in M_n by UV irradiation was small. Most of the tensile properties of PLLA and PCL films remained unchanged during UV irradiation, while solely the elongation at break of PCL film significantly decreased. This result reflects that among the tensile properties the elongation at break was most sensitive to the change in molecular characteristics of biodegradable polyesters by UV irradiation. The contrast between bright and dark parts of Maltese crosses remained unchanged for the spherulites in PLLA-C and PCL films even after UV irradiation for 200 h. This result exhibits that the cleaved fraction of the tie chains was too low to cause the traceable disorientation of lamellae.     

Synthesis of substituted (S)-2-aminotetralins via ring-opening of aziridines prepared from l-aspartic acid β-tert-butyl ester

This paper describes the total synthesis of the hydrochloride salts of (2S)-2-amino-7-methoxytetralin (21-HCl) and (2S)-2-amino-6-fluoro-7-methoxytetralin (ST1214), from a common enantiomerically pure aziridine 4b, which was available from l-aspartic acid β-tert-butyl ester. The synthesis of 21-HCl and ST1214 proceeded in nine steps and 5 and 6% overall yields, respectively. Key steps are the regioselective ring-opening of 4b with ArMgBr/CuBr·SMe₂ and the intramolecular Friedel-Crafts cyclisation providing α-tetralone. Substituted naphthalenes were formed as side products in the latter reaction.     

Enzymatic synthesis of ω-carboxy-β-hydroxy-(l)-α-amino acids

Commercially available ω-carboxy-aldehydes and glycine have been subjected to the catalytic action of an l-threonine aldolase from Escherichia coli to give the corresponding β-hydroxy-α-(l)-amino acids as a mixture of erythro/threo epimers.Specifically, the reaction with glyoxylic acid (2) gave the epimeric β-hydroxy-(l)-aspartates (t,e)-9 that could be isolated by ion-exchange chromatography in 67% yield. Following esterification and N-Boc protection, the two epimers could be isolated as pure compounds.Similarly, the aldolase-catalyzed addition of glycine to succinic semialdehyde (4) gave the expected mixture of β-hydroxy-l-α-aminoadipic acids (t)-12 and (e)-12 in 34% yield.     

Enantioselective epoxidation of α,β-unsaturated ketones catalyzed by stapled helical l-Leu-based peptides

Stapled helical l-leucine-based heptapeptides were synthesized and used as catalysts for the enantioselective epoxidation of α,β-unsaturated ketones. All N-terminal free stapled peptides were successfully used as chiral catalysts. Among them, the use of H-hS₃,₇hS-10 gave epoxide products with high enantioselectivities of up to 99% ee. Furthermore, the dominant conformations of the N-terminal protected stapled peptides R₃,₇R-10 and hS₃,₇hS-10 were investigated by ¹H NMR, IR, CD spectra, and X-ray crystallographic analysis. The peptide R₃,₇R-10 formed a right-handed (P) α-helix in solution and in the crystalline state, while hS₃,₇hS-10 formed a right-handed (P) 3₁₀-helix in solution.     

Synthesis of d-fructopyranosides with 2-O-acyl-β-d-fructopyranosides

Glycosylation of 2-O-acyl fructopyranosides was investigated, which were shown to be effective glycosyl donors for d-fructopyranoside synthesis with good β-selectivity and yields. For bulky acceptor 4e, α-anomer 5e was obtained with α/β = 65:23. Unexpected ring-opening was observed during acetylation of 9, indicating the sensitivity of the fructopyranosyl ring.     

Solvent-induced morphological diversification in poly(l-lactide-b-?-caprolactone) block copolymer thin films

Biodegradable block copolymer of poly(l-lactide-b-?-caprolactone) (P(LA-b-CL)) was dissolved in various solvents with different solubility as well as volatility, and spin-cast on a highly oriented pyrolytic graphite (HOPG) to prepare thin films. The surface morphologies were observed by using atomic force microscopy (AFM) in a dynamic force (tapping) mode. Particle like morphology was found in the thin films prepared form the dichloromethane and acetone. Higher volatility of dichloromethane and acetone resulted in the reflection of the particle like objects in the solution to HOPG substrate. In contrast, the P(LA-b-CL)s in toluene and 1,4-dioxane exhibited different morphologies compared to those in dichloromethane and acetone. Lower volatility of toluene and 1,4-dioxane assisted the epitaxial crystallization of PCL component along the HOPG lattice, that was revealed by enzymatic degradation of PLLA component by proteinase K. Thus, adjusting the solubility and solvent volatility for the film formation provided morphological divergence of the P(LA-b-CL) block copolymer, and this technique would be applicable for the surface patterning of biodegradable polymers.     

Enzymatic degradation of block copolymers obtained by sequential ring opening polymerization of l-lactide and ?-caprolactone

Copolymers of ?-caprolactone and l-lactide with different molar ratios were prepared via sequential ring opening polymerization (ROP) of both monomers. The resulting PCL-PLLA-PCL triblock copolymers were characterized by using NMR, SEC, DSC and XRD. One melting peak corresponding to the PCL block was detected, but the presence of PLLA decreased the crystallinity of PCL. Enzyme-catalyzed biodegradation of solution cast films was investigated at 37 °C in the presence of Pseudomonas lipase. It was observed that the PLLA component retarded the degradation of the block copolymer as compared to the PCL homopolymer. Therefore, the enzymatic degradation rate can be adjusted by varying the composition of the copolymers. ¹H NMR and SEC data showed no significant chemical composition or molecular weight changes during degradation, indicating that the degradation proceeded according to a surface erosion mechanism. ESEM confirmed surface erosion with appearance of a rugged morphology.     

Biodegradable poly(dl-lactide)/poly(ε-caprolactone) mixtures: Miscibility at the air/water interface

Mixtures of biodegradable polymers, poly(dl-lactide) and poly(ε-caprolactone) monolayers at the air/water interface have been studied. Surface pressure-area isotherms of poly(dl-lactide), poly(ε-caprolactone) and their mixtures were obtained by monolayer compression at constant temperature. The behavior of the mixed monolayers was analyzed according to the classical addition rule. Good agreement was observed between experimental and ideal behavior except for one composition where a negative deviation was observed. The polymer monolayer miscibility was corroborated by comparison between the surface pressure-area isotherms of the random copolymers (dl-lactide-co-ε-caprolactone) and their mixtures at the same compositions. Brewster angle microscopy (BAM) shows homogeneity in the monolayers in the whole range of compositions. These results also confirm the miscibility of the mixtures.     

Surface modification of microporous polypropylene membranes by the grafting of poly(γ-stearyl-l-glutamate)

A polypeptide, poly(γ-stearyl-l-glutamate) (PSLG), was grafted on the surface of hydrophobic polypropylene hollow fiber membranes through the ring opening polymerization of N-carboxyanhydride (NCA) of γ-stearyl-l-glutamate initiated by amino groups which was generated by ammonia plasma. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), together with water contact angle and bovium serum albumin adsorption measurements were used to characterize the modified membrane surface. The XPS and FT-IR spectra demonstrated that polypeptide was actually grafted on the membrane surface despite of the low degree of graft polymerization due to the hydroxyl groups on the membrane surface. To subject the ammonia plasma-treated membrane with γ-(aminopropyl)triethanoxysilane (γ-APS) which can react with hydroxyl groups and leave amino groups, the degree of graft polymerization could be improved. The bovium serum albumin adsorption measurement was conducted to further examine the surface properties of modified and original membranes. Potential applications of the PSLG grafted membranes are expected for enantiomer separation and/or enzyme immobilization.     

Synthesis and anti-HIV activity of l-β-3′-C-cyano-2′,3′-unsaturated nucleosides and l-3′-C-cyano-3′-deoxyribonucleosides

An efficient synthetic method was developed for l-β-3′-C-cyano-2′,3′-unsaturated nucleosides and l-3′-C-cyano-3′-deoxyribonucleosides. The key intermediate 11 was obtained from l-xylose, from which a series of pyrimidine and purine nucleosides were prepared in high yield by the coupling of 11 and various silyl-protected bases in the presence of TMSOTf. These nucleosides were eliminated, followed by deprotecting to give l-β-3′-C-cyano-2′,3′-unsaturated nucleosides. When selectively deprotected by hydrazine hydrate in buffered acetic acid-pyridine followed by treatment with potassium carbonate in methanol, l-3′-C-cyano-3′-deoxyribonucleosides were obtained. The synthesized nucleosides were tested for anti-HIV activity.     

An enantioselective nucleophilic addition of α,β-unsaturated trifluoromethylketones catalyzed by l-proline derivatives

An unexpected enantioselective 1,2-aldol reaction of acetone with α,β-unsaturated trifluoromethylketone catalyzed by l-proline derivative was described. The absolute configuration of the resulting chiral product was assigned based on a single crystal X-ray diffraction analysis. Structure-reactivity study of this organocatalytic system was briefly discussed. A reaction mechanism was tentatively postulated.     

In situ synthesis of di-n-butyl l-tartrate–boric acid complex chiral selector and its application in chiral microemulsion electrokinetic chromatography

A novel procedure for in situ assembling a complex chiral selector, di-n-butyl l-tartrate–boric acid complex, by the reaction of di-n-butyl l-tartrate with boric acid in a running buffer was reported and its application in the enantioseparation of β-blockers and structural related compounds by chiral microemulsion electrokinetic chromatography (MEEKC) has been demonstrated. In order to achieve a good enantioseparation, the effect of dibutyl l-tartrate and sodium tetraborate concentration, surfactant identity and concentration, cosurfactant, buffer pH and composition, organic modifiers, as well as applied voltage and capillary length were investigated. Ten pairs of enantiomers that could not be separated with only dibutyl l-tartrate, obtained good chiral separation using the complex chiral selector; among them, seven pairs could be baseline resolved under optimized experimental conditions. The fixation of chiral centers by the formation of five-membered rings, and being oppositely charged with basic analytes were thought to be the key factors giving the complex chiral selector a superior chiral recognition capability. The effect of the molecular structure of analytes on enantioseparation was discussed in terms of molecular interaction.     

Selective sulfonylation of 4-C-hydroxymethyl-β-l-threo-pento-1,4-furanose: synthesis of bicyclic diazasugars

Hydroxymethylation of α-d-xylo-pentodialdose 6 using excess formaldehyde and sodium hydroxide in THF-water (one pot aldol and crossed Cannizzaro reactions) followed by hydrogenolysis of C3-O-benzyl group afforded triol 8. The regio-selective α- and β-sulfonylation of hydroxymethyl groups in 8 afforded 9a (α-sulfonylation) and 14 (β-sulfonylation) in good yield. The cleavage of the 1,2-acetonide functionality, individually in 9a and 14, followed by reaction with 1,3-diaminopropane gave in situ formation of sugar aminals, that undergo concomitant nucleophilic displacement of the sulfonyloxy group by amino functionality to give hitherto unknown bicyclic diazasugars 4 and 5, respectively, with a hydroxymethyl substituent at C-7.