A poly(vinyl pyrrolidone) (PVP) seven-arms star polymer with lysozyme core was synthesized by conjugating linear N-succinimidyl ester terminated PVP polymer to lysozyme. Reactive PVP polymers were synthesized using a MADIX/RAFT agent functionalized with N-succinimidyl ester. The polymerization of N-vinyl pyrrolidone proceeded in a living fashion up to more than 90% conversion reaching molecular weight of up to 33 000 g · mol−1 with narrow molecular weight distributions. The PVP polymer was conjugated to lysozyme resulting in the attachment of seven PVP polymers to one lysozyme core. While the reaction was found to be complete when using low-molecular weight PVP, some by-products with less than seven arms were observed when using PVP with a molecular weight of 33 000 g · mol−1.
Multi-functional mikto-arm star polymers containing three different arms [hydrophilic, SN-38-P(OEGMA8–9)11, cationizable, SN-38-P(DMAEMA)38 and hydrophobic, SN-38-P(BMA)26] were prepared by RAFT polymerization via an arm-first approach using a cleavable cross-linker. The star polymers were cleaved to the linear arms with tributylphosphine as a reducing agent. The decrease in molecular weight observed is consistent with the initial stars having approximately five arms. Blue fluorescence was observed when a solution of mikto-arm star was irradiated under a 365 nm light proving the retention of the SN-38 moiety during star formation by RAFT polymerization. Thus these polymer-drug conjugates can be considered as potential delivery vehicles for cancer therapy. The P(DMAEMA) arms can be quaternized using iodomethane, allowing star polymers to bind negatively charged small interfering RNA (siRNA) and potentially be used as a carrier for that material. 相似文献
This review summarizes recent advances in the controlled radical polymerization of N-vinyl monomers, such as N-vinylcarbazole, N-vinylindole derivatives, N-vinylpyrrolidone, N-vinylcaprolactam, N-vinylformamide, N-vinylacetoamide derivatives, N-vinyl(na)phthalimides, N-vinylimidazolium salts, and N-vinyltriazoles. Recent significant progress of controlled radical polymerization of these N-vinyl monomers has allowed for the synthesis of well-defined functional polymers having various architectures, including block copolymers, branched polymers (stars, star block copolymers, miktoarm star copolymers, and graft copolymers), and hybrids. Characteristic properties, assembled structures, and three-dimensional architectures of these functional polymers derived from N-vinyl monomers are briefly introduced. 相似文献
Star polymers with different numbers and lengths of poly(tert-butyl acrylate) (PTBA) arms were obtained via atom transfer radical polymerization. Aliphatic alcohols with different number of hydroxyl groups varying from 3 to 6 and calix[4]arenes based on pyrogallol with 12 and 16 phenol groups were transformed to bromoester derivatives to prepare multifunctional ATRP initiators used as the cores of the stars. The star polymers were characterized by GPC with refractive index, multiangle laser light scattering and viscosimetric detectors. The molar masses of the stars reached 70,000 g/mol and the molar mass dispersities did not exceed 1.2. To elucidate the compact structure of the stars, their true molar masses were determined by GPC with triple detection (RI-MALLS-Visco) and compared with the apparent molar masses obtained from the calibration with linear poly(tert-butyl acrylate) standards. The intrinsic viscosities of the PTBA stars of the same molar mass decreased with the number of star arms but were always lower than the intrinsic viscosities of the analogue linear PTBA polymers. The values of the branching ratio g′ decreased with increasing number of arms indicating more compact structure of stars. The branching ratio g′ was correlated to the empirical predictions. 相似文献
A recently invented novel family of RAFT (Reversible Addition-Fragmentation chain Transfer) agents having a common formula Z-C(S)-S-CR2COOR1 where Z = -SR, -NR2, or -OR, and R1 represents H or a variety of functional groups allows for tailoring their hydrophilicity-hydrophobicity balance. A limited hydrophilicity of the RAFT agents can be achieved which is sufficient for their diffusion through water, yet the agents are hydrophobic enough to phase-separate out of water. Thus, the limited hydrophilicity of otherwise hydrophobic agents allows them to be at the loci of polymerization making them suitable for the emulsion polymerization mechanism. With several RAFT agents, good control over molecular weight was demonstrated for a broad variety of ab initio acrylic emulsion polymers. For methyl methacrylate, a portion of RAFT did not engage, resulting in less than the theoretical number of polymer chains. It was found, however, that as little as ∼10 wt% of an acrylic monomer slowed down polymerization enough to engage all RAFT agent molecules and yield predicted molecular weights. A broad variety of colorless and odorless telechelic acrylic and methacrylic emulsion polymers were synthesized.Microemulsion and solution-dispersion techniques produced clean colloidally stable RAFT dispersions. These two techniques did not require RAFT agents with tailored hydrophilicity-hydrophobicity.The UV spectra and photooxidative stability of the RAFT polymers were studied. The RAFT fragment in polymers appeared to have no impact on their photooxidative stability. 相似文献
Poly(ethylene oxide) methyl ether/polystyrene/poly(l-lactide) (MPEO/PSt/PLLA) ABC miktoarm star copolymers were synthesized by combination of reversible addition-fragmentation transfer (RAFT) polymerization and ring-opening polymerization (ROP) using bifunctional macro-transfer agent, MPEO with two terminal dithiobenzoate and hydroxyl groups. It was prepared by reaction of MPEO with maleic anhydride (MAh), subsequently reacted with dithiobenzoic acid and ethylene oxide. RAFT polymerization of St at 110 °C yielded block copolymer, MPEO-b-PSt [(MPEO)(PSt)CH2OH], and then it was used to initiate the polymerization of l-lactide in the presence of Sn(OCt)2 at 115 °C to produce ABC miktoarm star polymers, s-[(MPEO)(PSt)(PLLA)]. The structures of products obtained at each synthetic step were confirmed by NMR and gel permeation chromatography data. 相似文献
We have developed a novel strategy for the preparation of ion‐bonded supramolecular star polymers by RAFT polymerization. An ion‐bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert‐butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by 1H NMR and GPC. The results show that the polymerization possesses the character of living free‐radical polymerization and the ion‐bonded supramolecular star polymers PSt, PtBA, and PSt‐b‐PtBA, with six well‐defined arms, were successfully synthesized.
Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The 1H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST. 相似文献
Changes in the conformations of two polyelectrolyte stars with amphiphilic segments during their convergence are investigated by the Scheutjens-Fleer method (a numerical method of solving self-consistent field equations). The stars are placed in an aqueous-salt solvent at a pH close to the pK of the segments of polyelectrolyte arms. Individual stars have a two-phase quasi-micellar conformation at a sufficiently strong hydrophobicity of segments in the uncharged state and at a sufficiently low salt concentration. This conformation is formed via separation of star arms into two groups: One consists of uncharged arms and forms a dense core in the star center, while the other consists of arms coming through and forming a corona with charged arms. When stars in this conformation converge, the transition of arms from the corona on the side of the oncoming star to the core occurs inside both stars. When stars touch each other with their cores, the stars merge into a united quasi-micelle. The free energy of interaction of stars is a nonmonotonic function of distance D between their centers. This value grows with a decrease in D until the cores come into contact. Upon the contact and merging of the cores, the free-energy values are characterized by a local minimum corresponding to an ellipsoid-shaped united quasi-micelle. With an increase in the concentration of salt in the solution, individual stars adopt extended conformations. In this case, the interaction of two stars is repulsive at all D values. However, if the salt concentration very slightly exceeds the threshold value of formation of a core in an isolated star, then the initially extended stars during their approach toward each other adopt (at first, each of them separately) a quasi-micellar conformation, while their cores grow as they converge and merge upon contact. 相似文献