Synthesis and characterization of a new soluble conducting polymer and its electrochromic device

A mixture of isomers 2,5-di(4-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole, 2-(4-methyl-thiophen-2-yl)-5-(3-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole and 2,5-di(3-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole (Me-SNS(NO₂)) were synthesized. Resulting monomers were polymerized chemically, producing soluble polymers in common organic solvents. The average molecular weight has been determined by gel permeation chromatography (GPC) as Mn=5.6×10³ for the chemically synthesized polymer. The monomers were also electrochemically polymerized in the presence of LiClO₄, NaClO₄ (1:1) as the supporting electrolyte in acetonitrile solvent. Resulting polymers were characterized via CV, FTIR, NMR, SEM and UV–Vis spectroscopy. Spectroelectrochemistry analysis of polymer revealed Π–Π^* transition below 300 nm, with an electronic band gap of 2.18 ev. Switching ability of the polymer was evaluated by kinetic study measuring percent transmittance (%T) at the maximum contrast point, indicating that poly(Me-SNS(NO₂)) is a suitable material for electrochromic devices.     

Synthesis and characterization of a bifunctional amido-thiophene monomer and its copolymer with thiophene and electrochemical properties

A bifunctional amido-thiophene namely hexamethylene (bis-3-thiophene acetamide) (HMTA) was synthesized by the reaction of 3-thiophene acetic acid with hexamethylene diamine. Copolymerization in the presence of thiophene was achieved electrochemically in tetrabutylammonium tetrafluoroborate/acetonitrile (TBAFB/AN). Spectroelectrochemical analysis of the resulting copolymer [P(HMTA-co-Th)] reflected electronic transitions at 505 nm, 740 nm and ∼1000 nm, revealing π to π* transition, polaron and bipolaron band formation respectively. Switching ability was evaluated by a kinetic study via measuring the transmittance (%T) at the maximum contrast. Dual type polymer electrochromic devices (ECDs) based on P(HMTA-co-Th) and poly(ethylene dioxythiophene) (PEDOT) have been constructed. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-vis spectroscopy and cyclic voltammetry. These devices exhibit low switching voltages (between 0.0 V and +1.6 V), short switching times with reasonable switching stability under atmospheric conditions.     

Synthesis of substituted dipyrido[3,2-a:2′,3′-c]phenazines and a new heterocyclic dipyrido[3,2-f:2′,3′-h]quinoxalino[2,3-b]quinoxaline

Three new α,α′-diimine ligands were synthesized based on condensation of 1,10-phenanthroline-5,6-dione with 1,2-phenylenediamine derivatives using different approaches. All compounds were fully characterized by IR, ¹H and ¹³C NMR, UV-visible, and MS spectroscopies. We report the first example of a dipyrido[3,2-f:2′,3′-h]quinoxalino[2,3-b]quinoxaline, which exhibits a strong absorption at 430 nm and an interesting electrochemical behavior. These new molecules may have biological potential and are of synthetic and technological importance.     

Synthesis, characterization and electrochromic properties of conducting copolymers of 2,3-bis-[(3-thienylcarbonyl)oxy]propyl 3-thiophene carboxylate with thiophene and pyrrole

2,3-bis-[(3-thienylcarbonyl)oxy]propyl 3-thiophene carboxylate (TOPT) was synthesized via the reaction of 3-thionylcarboxylic acid with glycerol, and electrochemically polymerized either with thiophene and pyrrole by using tetrabutylammonium tetrafluoroborate (TBAFB) as the supporting electrolyte in acetonitrile (AN). Characterization of the resulting copolymers was performed via cyclic voltammetry, FTIR, thermal gravimetry analysis (TGA), and scanning electron microscopy (SEM). Electrical conductivities were measured by the four-probe technique. Spectroelectrochemical analysis shows that the copolymer of the monomer with thiophene has an electronic band gap (due to the π-π^∗ transition) of 2.00 eV, with a dark red color in the fully reduced form and a green color in the fully oxidized form. The copolymer exhibited a long-term switching stability up to 1800 double switches.     

Synthesis of pyrrolo[3,4-b]pyrroles and perhydrothiazolo[3′,4′-2,3]pyrrolo[4,5-c]pyrroles

The 1,3-dipolar cycloaddition reactions of various N-tethered alkenyl aldehydes with some cyclic and acyclic amino acids have been studied. Some key sulfonamides having strategically positioned aldehyde and olefinic tether have been synthesized and effectively subjected to intramolecular azomethine ylide cycloaddition reaction resulting in a series of pyrrolo[3,4-b]pyrrole and its N-1-C-2 derivatives, and a series of novel heterotricyclic compounds, perhydrothiazolo[3′,4′-2,3]pyrrolo[4,5-c]pyrroles, in good yields. The intramolecular cycloaddition reaction was found to be highly stereoselective to form only cis-fused cycloadducts in all cases.     

Pyrazolo[2′,3′:3,4][1,3]oxazino[5,6-b]quinoxaline, a novel tetracyclic ring system

Reaction of 2-chloro-3-(3-chloro-1H-pyrazol-5-yl)quinoxaline and aldehydes does not afford the corresponding N-(α-hydroxyalkylated) derivatives but results in a cyclisation reaction to give a derivative bearing the hitherto undescribed pyrazolo[2′,3′:3,4][1,3]oxazino[5,6-b]quinoxaline system.     

Synthesis of 2,6-disubstituted pyrido[2,3-b][1,4]oxazines

A new preparative method for pyrido[2,3-b][1,4]oxazines from 6-substituted 3-nitro-2-pyridones is demonstrated. This method consists of two steps: O-alkylation and reductive cyclization. In the former step, the bulkiness of both starting nitropyridones and C2 reagents is found to be essential for avoiding N-alkylation, which undergoes O-alkylation efficiently. The subsequent reductive cyclization affords pyridoxazines with carbon substituents at both the 2- and the 6-positions that have not been available.     

Synthesis and tautomeric structure of 6-arylhydrazono 1H-pyrazolo[3′,4′:4,5]pyrimido[1,6-b][1,2,4]triazepines

A simple synthetic strategy is described for synthesis of the hitherto unreported 6-arylhydrazono-1,3-diphenyl-7-methyl-1H-pyrazolo[3′,4′:4,5]pyrimido[1,6-b][1,2,4]triazepin-5(6H)-ones 5a-j. The acid dissociation constants were determined for the series prepared and were correlated by the Hammett equation using the enhanced substituent constants. The results of such a correlation together with the spectral data indicated that the studied compounds exist predominantly in the hydrazone tautomeric form.     

Fused pyrazino[2,3-b]indolizine and indolizino[2,3-b]quinoxaline derivatives; synthesis, structures, and properties

The synthesis of six new compounds incorporating either a pyrazino[2,3-b]indolizine or indolizino[2,3-b]quinoxaline core are reported in good yield (58-87%). The intermediates for the key cyclization reaction for one set of compounds (5a-c), with a sterically demanding 3,5-dimethylpyrazole group in the 5-position of the core, were found to be mono-substituted. These intermediates could be isolated and cyclized by heating under acid-catalyzed conditions. To further demonstrate the versatility of the chemistry, compounds 6a-c were synthesized in 58-68% yields. Compounds 5a-c are non-planar in solution and the solid-state, while 6a-c have close to planar conformations, pointing to weak hydrogen bonds between the acidic C-Hs and the adjacent azine nitrogen atoms. The cytotoxicity of the six newly synthesized and three previously prepared compounds was assessed against a human glioblastoma multiforme cell line.     

Synthesis of pyrido[2′,1′:2,3]imidazo[4,5-b]quinoline and pyrido[1′,2′:1,2]imidazo[4,5-b]quinoline and their benzo and aza analogs via tandem catalysis

In this paper we report regioselective tandem metal-catalyzed aminations on dihaloquinolines (2-chloro-3-iodoquinoline and 2,3-dibromoquinoline) with amino(benzo)(di)azines. Eight new heterocyclic scaffolds of the dipyridoimidazole type could be synthesized. By controlling the reaction temperature selective C-2 intermolecular Pd-catalyzed amination on 2,3-dibromoquinoline with amino(benzo)(di)azines can be achieved.     

From N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine to propeller-shaped N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)-amine: syntheses and structures

Three unique propeller-shaped helicenyl amines compounds: N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine (1), N-phenyl-N,N-di(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (2), and N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (3) were efficiently synthesized by Wittig reaction and oxidative photocyclization. The crystal structures of 1, 2 and molecular configuration optimization (DFT-B3LYP/6-31+G(d)) of 3 reveal that the steric hindrance from the moiety of trithia[5]helicene effectively forces the nitrogen atom and the three bonded carbon atoms to coplanar and the interplanar angles of the facing terminal thiophene ring and benzene ring becoming larger when the helical arm increased from 1 to 3. Electrochemical properties and UV–vis absorption behaviors of 1, 2, 3 were primarily determined by the moiety of trithia[5]helicene.     

Synthesis, single crystal X-ray structure and optical properties of 3,4-dimethyl-dithieno[2,3-b:3′,2′-d]thiophene-7,7-dioxide

The synthesis of the title compound (4), starting from commercial 3-bromo-4-methylthiophene, is described. The single crystal packing mode of 4, as well as the absorption and photoluminescence properties in solution and in the solid state are reported and analyzed in relation to those of the isomeric 3,5-dimethyl-dithieno[3,2-b:2′,3′-d]thiophene-4,4-dioxide (7). The different reactivities of 4 and 7 towards bromination are analyzed in the light of the results of ab initio B3LYP/6-31G^∗ calculations on both compounds.     

Synthesis and properties of 1,3,3-trimethylspiro[indoline-2,3′-naphtho[2,1-b][1,4]oxazin]-6′-amine, a novel, red colouring photochromic spirooxazine

The synthesis and photochromic properties of 1,3,3-trimethylspiro[indoline-2,3′-naphtho[2,1-b][1,4]oxazin]-6′-amine, a novel red-colouring photochromic spirooxazine and derivatives is reported. The synthesis proceeds via an unusual one-pot transamination, oxime formation, N-O bond cleavage, spirooxazine formation process.     

Synthesis and conformational analysis of naphth[1′,2′:5,6][1,3]oxazino[3,2-c][1,3]benzoxazine and naphth[1′,2′:5,6][1,3]oxazino[3,4-c][1,3]benzoxazine derivatives

A new functional group, the hydroxy group, was inserted into a Betti base by reaction with salicylaldehyde, and the naphthoxazine derivatives thus obtained were converted by ring-closure reactions with formaldehyde, acetaldehyde, propionaldehyde or phosgene to the corresponding naphth[1′2′:5,6][1,3]oxazino[3,2-c][1,3]benzoxazine derivatives. Further, the conformational analysis of these polycyclic compounds by NMR spectroscopy and an accompanying molecular modelling are reported; especially, both quantitative anisotropic ring current effects of the aromatic moieties in these compounds and steric substituent effects were employed to determine the stereochemistry of the naphthoxazinobenzoxazine derivatives.     

Study of electrochemical stability of conducting polymers by bidimensional spectroelectrochemistry: p- and n-doping of poly(4,4′-bis(butylthio)-2,2′-bithiophene) films

UV-vis bidimensional spectroelectrochemistry has been applied to the study of the electrochemical stability of conducting polymer films during p- and n-doping processes. Specifically, poly(4,4′-bis(butylthio)-2,2′-bithiophene) has been chosen as example to prove the usefulness and suitability of this multi-response technique to characterize polymer stability during p- and n-doping. It was found that oxidative doping and corresponding de-doping alone did not result in noticeable polymer film degradation. However, in experiments involving both p- and n-doping of this conducting polymer, soluble species arising from the polymer film were detected in solution for the first time, indicating a lower electrochemical stability of the film under these experimental conditions. Moreover, bidimensional spectroelectrochemistry has enabled us not only to detect the soluble degradation products, but also the potential range in which the degradation takes place.     

Synthesis of tetrahydropyrido- and pyrido-[1′,2′:1,2]imidazo[4,5-b]pyrazine derivatives

Reactions of tetrafluoropyridazine with iminopiperidine and 2-aminopiccoline gave novel tetrahydropyrido- and pyrido-[1′,2′:1,2]imidazo[4,5-b]pyrazine heterocyclic frameworks respectively in high yields.     

Synthesis and functionalization of 2-hydroxypyrimido[4,5-b][1,4]oxazine

An efficient synthesis of pyrimido[4,5-b][1,4]oxazines is realized using 5-bromouracil. Substitution in the 2-position was performed by palladium-mediated cross-coupling reactions (Suzuki, Stille and carbon-nitrogen bond forming process) and by S_NAr reactions. Microwave-heating is also used for high-speed synthesis.     

Multiple one-electron oxidation and reduction of trinuclear bis(2,4-pentanedionato)ruthenium complexes with substituted diquinoxalino[2,3-a:2′,3′-c]phenazine ligands

The complexes (μ₃-L¹/L²)[Ru(acac)₂]₃, acac⁻ = 2,4-pentanedionato, L¹ = 2,3,8,9,14,15-hexachlorodiquinoxalino[2,3-a:2′,3′-c]phenazine and L² = 2,3,8,9,14,15- hexamethyldiquinoxalino[2,3-a:2′,3′-c]phenazine, undergo stepwise one-electron oxidation involving a total of three electrons and stepwise one-electron reduction with three (L²) or four electrons (L¹). All reversibly accessible states were characterized by UV–Vis–NIR spectroelectrochemistry. Oxidation leads to mixed-valent intermediates {(μ₃-L)[Ru(acac)₂]₃}⁺ and {(μ₃-L)[Ru(acac)₂]₃}²⁺ of which the Ru^IIIRu^IIRu^II combinations exhibit higher comproportionation constants K_c than the Ru^IIIRu^IIIRu^II states – in contrast to a previous report for the unsubstituted parent systems {(μ₃-L³)[Ru(acac)₂]₃}^+/2+, L³ = diquinoxalino[2,3-a:2′,3′-c]phenazine. No conspicuous inter-valence charge transfer absorptions were observed for the mixed-valent intermediates in the visible to near-infrared regions. The monocations and monoanions were characterized by EPR spectroscopy, revealing rhombic ruthenium(III) type signals for the former. Electron addition produces ruthenium(II) complexes of the reduced forms of the ligands L, a high resolution EPR spectrum with ¹⁴N and ^35,37Cl hyperfine coupling and negligible g anisotropy was found for {(μ₃-L¹)[Ru(acac)₂]₃}⁻. DFT calculations of (μ₃-L¹)[Ru(acac)₂]₃ confirm several ligand-centered low-lying unoccupied MOs for reduction and several metal-based high-lying occupied MOs for electron withdrawal, resulting in low-energy metal-to-ligand charge transfer (MLCT) transitions.     

Improved synthesis of N-alkyl substituted dithieno[3,2-b:2′,3′-d]pyrroles

A new, convergent and improved synthetic method to prepare N-alkyl substituted dithienopyrroles is described. The procedure consists of a Pd-catalyzed amination of 3,3′-dibromo-2,2′-bithiophene. The reaction conditions were optimized, which makes this method applicable to prepare these molecules easily in high yields and on a large scale.     

Electrophile-induced domino cyclization reaction for the synthesis of 2,2a,10,11-tetrahydrofuro[2′,4′:4,6]pyrano[2,3-b]quinolines

A new and efficient synthesis of furo[2′,4′:4,6]pyrano[2,3-b]quinolines, via a domino cyclization approach, has been achieved by iodine and mercuric oxide-catalyzed intramolecular cyclization of 3-homoallyl-2-quinolones in acetic acid.