Dual catalytic performance of arene-ruthenium amine complexes for norbornene ring-opening metathesis and methyl methacrylate atom-transfer radical polymerizations

Arene ruthenium(II) complexes bearing the cyclic amines RuCl₂(η⁶-p-cymene)(pyrrolidine)] ( 1 ), [RuCl₂(η⁶-p-cymene)(piperidine)] ( 2 ), and [RuCl₂(η⁶-p-cymene)(peridroazepine)] ( 3 ) were successfully synthesized. Complexes 1 – 3 were fully characterized by means of Fourier transform infrared, UV–visible, and NMR spectroscopy, elemental analysis, cyclic voltammetry, computational methods, and one of the complexes was further studied by single crystal X-ray crystallography. These compounds were evaluated as catalytic precursors for ring-opening metathesis polymerization (ROMP) of norbornene (NBE) and atom-transfer radical polymerization (ATRP) of methyl methacrylate (MMA). NBE polymerization via ROMP was evaluated using complexes 1 – 3 as precatalysts in the presence of ethyl diazoacetate (EDA) under different [NBE]/[EDA]/[Ru] ratios, temperatures (25 and 50°C), and reaction times (5–60 min). The highest yields of polyNBE were obtained with [NBE]/[EDA]/[Ru] = 5000/28/1 for 60 min at 50°C. MMA polymerization via ATRP was conducted using 1 – 3 as catalysts in the presence of ethyl-α-bromoisobutyrate (EBiB) as initiator. The catalytic tests were evaluated as a function of the reaction time using the initial molar ratio of [MMA]/[EBiB]/[Ru] = 1000/2/1 at 95°C. The increase in molecular weight as function of time indicates that complexes 1–3 were able to mediate the MMA polymerization with an acceptable rate and some level of control. Differences in the rate of polymerization were observed in the order 3 > 2 > 1 for the ROMP and ATRP.     

Anionic Oligomerization of Methyl Methacrylate by Alkali Metal Alkoxides

Abstract

The kinetics of the oligomerization of methyl methacrylate (MMA) by methoxide/methanol solutions was studied using gas chromatography techniques. The effects of the type of the alkali metal, [CH OH]/[monomer] ratio, solvent, and initiator concentration were investigated. The rate of conversion using different alkali metal alkoxides was in the order CH₃OLi < CH₃ONa < CH₃OK, but no oligomers higher than the addition product, RO—MMA (n=1), could be obtained by CH₃OLL DP_n decreased with increasing the [CH₃OH]/[monomer] ratio and with lowering of the initiator concentration. Using DMSO as solvent increased the yields of the higher oligomers. The formation of n=1 was reversible, contrary to the formation of the higher oligomers. Some of the rate constants of the various steps of the oligomerization were estimated by taking into account the reversibility of the initiation reaction and assuming steady-state conditions in the concentration of the various anions present in the system.     

ATRP of MMA initiated by 2-bromomethyl-4,5-diphenyloxazole at room temperature and study of fluorescent property

Atom transfer radical polymerization (ATRP) of MMA was conducted successfully at ambient temperature (25 °C) using 2-bromomethyl-4,5-diphenyloxazole as initiator, CuBr/2,2′-bipyridine (BPY) as catalyst, and 1,4-Dioxane as solvent. Factors such as the reaction temperature, mole ratio of monomer and catalyst to initiator, solvent and so on, which can affect the ATRP system, were discussed in the paper. Chain extension was conducted using polymer as the macro-initiator which was characterized via ¹H NMR. The optical property of initiator was well preserved in the obtained PMMA, and the end-functionalized PMMA exhibited obvious fluorescent emission at 367 nm.     

甲基丙烯酸甲酯的原子转移自由基悬浮聚合

以 1 苯基氯乙烷为引发剂 ,氯化亚铜为催化剂 ,2 ,2 联吡啶为配体 ,外加搅拌 ,氮气保护下进行了甲基丙烯酸甲酯 (MMA)在 80℃下的原子转移悬浮聚合 .结果表明 ,聚合反应符合对单体浓度为一级的动力学关系 .经计算聚合体系的增长自由基浓度为 5 .74× 10 - 8mol L .聚合物分子量随转化率呈线性增加 ,分子量分布较窄 ,Mw Mn 在 1.37～ 1.40之间 .还以AIBN为引发剂 ,在三氯化铁和三苯基膦存在下进行了MMA的反向原子转移本体和悬浮聚合研究 .结果证明本体聚合具有好的可控特征 ,分子量随转化率呈线性增长 ,分子量分布指数在 1.2 7～ 1.31之间 .聚合反应速率较快 ,聚合体系中的增长自由基浓度较高 ,为 1.6 4× 10 - 7mol L .而在此催化体系下的悬浮聚合则完全失去了活性特征     

Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Similarities and differences of epoxide, aldehyde and peroxide initiators for Cp2TiCl-catalyzed styrene living radical polymerizations

Cp₂TiCl is the first example of a single electron transfer (SET) agent that both provides initiating radicals from three different types of functionalities (i.e. radical ring opening of epoxides and reduction of aldehydes and peroxides) and doubles as mediator for the living radical polymerization of styrene (St) by reversibly endcapping the growing polymer chains. An initiator (I) comparison was performed using 1,4-butanediol diglycidyl ether (BDE), benzaldehyde (BA) and benzoyl peroxide (BPO) as models. The investigation of the effect of reaction variables was carried out over a wide range of experimental conditions ([Cp₂TiCl₂]/[I] = 0.5/1-4/1; [Zn]/[Cp₂TiCl₂] = 0.5/1-3/1, [St]/[I] = 50/1-400/1 and T = 60-130 °C) to reveal living polymerization features such as a linear dependence of molecular weight on conversion and narrow molecular weight distribution (M_w/M_n) for each initiator class. However, progressively lower polydispersities and larger initiator efficiencies are obtained with increasing the [Cp₂TiCl₂]/[I] and [Zn]/[Cp₂TiCl₂] ratios and with decreasing temperature. Accordingly, optimum conditions correspond to [St]/[I]/[Cp₂TiCl₂]/[Zn] = [50-200]/[1]/[2-3]/[4-6] at 70-90 °C. By contrast to peroxides, aldehydes and the more reactive epoxides provide alcohol end groups useful in block or graft copolymers synthesis.     

Packed column reactor for continuous atom transfer radical polymerization: Methyl methacrylate polymerization using silica gel supported catalyst

A continuous column reactor packed with silica gel supported CuBr‐HMTETA catalyst has been successfully developed for ATRP of MMA. The reactor had a good catalytic stability up to 100 h. The MMA conversion decreased with an increasing feeding flow rate. The polymerization kinetics was first order with respect to the monomer. The molecular weight increased linearly with conversion, demonstrating the living character. Possible flow back‐mixing and polymer trapping in the pores of silica gel caused some broadening in the molecular weight distribution. This type of packed column reactor is believed to be a significant development for possible commercial exploitation of the ATRP process.     

甲基丙烯酸2-N,N-二甲氨基乙酯与甲基丙烯酸甲酯的氧化共聚合的机理研究

研究了CuCl/五甲基二亚乙基三胺(PMDETA)催化的甲基丙烯酸2-N,N-二甲氨基乙酯(DMAEMA)与甲基丙烯酸甲酯(MMA)在氧气存在下的氧化共聚合,通过改变单体配比、催化剂浓度和反应温度对实验条件进行研究.结果显示,在本实验中的单体配比([DMAEMA]∶[MMA]=10∶0～5∶5)、催化剂浓度([CuCl/PMDETA3]=3.1×10-5 mol/L～6×10-3 mol/L)和反应温度(30～80℃)下,聚合均可以顺利发生,而且聚合过程中单体转化率和所得聚合物的分子量都随着反应进行而增加,且分子量呈现宽分布.1H-NMR结果显示所得聚合物中含有DMAEMA和MMA的单体单元.DSC结果显示所得聚合物是一个部分相容体系.利用此方法所得的PDMAEMA进行MMA的原子转移自由基聚合(ATRP)扩链过程则证实,所得聚合物具有C—Cl末端官能团.由此可以认为,在以上过程中,O2先将CuCl氧化成[Cu(Ⅱ)Cl]+,[Cu(Ⅱ)Cl]+再将二甲胺基氧化成N—CH2.自由基,N—CH2.自由基与[Cu(Ⅱ)Cl]+构成反向ATRP体系,从而得到以C—Cl为末端的聚合物.     

Copper Catalyzed ATRP of Methyl Methacrylate Using Aliphatic α-Bromo Ketone Initiator

The atom transfer radical polymerization (ATRP) of MMA was examined using 3-bromo-3-methyl-butanone-2 (MBB) as an initiator in the presence of CuBr as catalyst and 2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine (BPIEP) as a tridentate N-donor ligand. The effect of various other N-donor ligands including a bisoxazoline ligand, namely, 2,6-bis(4,4-dimethyl-2-oxazolin-2-yl) pyridine (dmPYBOX) was studied in ATRP and reverse ATRP of MMA. The ATRP of MMA in toluene at 90 °C using MBB as initiator was relatively slow in the case of bidentate and faster in the case of tridentate N-donor ligands. The apparent rate constant, k_app, with MBB as initiator and BPIEP as ligand in toluene (50%, v/v) at 90 °C was found to be 7.15 × 10⁻⁵ s⁻¹. In addition, reverse ATRP of MMA in diphenylether at 70 °C using BPIEP/CuBr₂ as catalyst system was very effective in reducing the reaction time from several hours to 24 h for polymerization of MMA.     

Cp2TiCl-catalyzed radical chemistry: living styrene polymerizations from epoxides, aldehydes, halides, and peroxides

Four different Cp₂TiCl-activated radical sources (1,4-butanediol diglycidyl ether, benzaldehyde, (1-bromoethyl)benzene, and benzoyl peroxide) were investigated as initiators in the Cp₂TiCl-catalyzed living radical polymerization of styrene (St). The effect of reaction variables was investigated over a wide range of values ([St]/[I]=50/1-400/1, [I]/[Cp₂TiCl₂]=1/0.5-1/4, [Cp₂TiCl₂]/[Zn]=1/0.5-1/3 and T=40-130 °C). A linear dependence of molecular weight on conversion was observed for each initiator, but larger initiator efficiencies and lower polydispersities were obtained upon increasing [Cp₂TiCl₂] and [Zn] and decreasing temperature. The optimum conditions are initiator dependent but broadly correspond to [St]/[I]/[Cp₂TiCl₂]/[Zn]=[50-200]/[1]/[2-3]/[4-6] at 70-90 °C. The most robust initiators are aldehydes followed by peroxides, epoxides, and finally halides.     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

Kinetic and particle size studies of emulsion polymerization of methyl methacrylate and styrene with using polyamidoamine dendrimer as seed

The emulsion polymerization of methyl methacrylate (MMA) and styrene (St) were investigated with using polyamidoamine (PAMAM) dendrimer as seed, potassium persulfate as initiator and sodium dodecyl sulfate as emulsifier. The effects of 4.0GPAMAM dendrimer concentration, initiator concentration, emulsifier concentration, monomer concentration, and polymerization temperature on the monomer conversion and polymerization rate were investigated. At the same time, the influence of the generation of PAMAM dendrimer on latex particle size was studied also. The results showed that the monomer conversion and polymerization rate increased with increasing initiator concentration, emulsifier concentration, monomer concentration, and polymerization temperature. But polymerization rate increased firstly with an increase in the 4.0GPAMAM dendrimer from 0.03 g to 0.09 g and then decreased with further increase to 0.12 g. When the concentration of 4.0GPAMAM dendrimer less than 1.449 × 10^?4 mol/L, the kinetic equation can be expressed by Rp∝[4.0GPAMAM]^0.772[SDS]^0.562[KPS]^0.589[M]^0.697, and the activation energy (Ea) of emulsion polymerization is 62.56kJ/mol. In additional, the copolymer latex particle size decreased and possessed monodispersity with increasing the generation of PAMAM dendrimer. According to FT-IR spectrum analysis, PAMAM dendrimer is successfully incorporated into the poly(PAMAM-St–MMA) latex particles.     

Atom transfer radical polymerization of sodium2‐acrylamido‐2‐methylpropanesulfonate

The first example of well‐controlled atom transfer radical polymerization (ATRP) of a permanently charged anionic acrylamide monomer is reported. ATRP of sodium 2‐acrylamido‐2‐methylpropanesulfonate (NaAMPS) was achieved with ethyl 2‐chloropropionate (ECP) as an initiator and the CuCl/CuCl₂/tris(2‐dimethylaminoethyl)amine (Me₆TREN) catalytic system. The polymerizations were carried out in 50:50 (v/v) N,N‐dimethylformamide (DMF)/water mixtures at 20 °C. Linear first‐order kinetic plots up to a 92% conversion for a target degree of polymerization of 50 were obtained with [ECP]/[CuCl]/[CuCl₂]/[Me₆TREN] = 1:1:1:2 and [AMPS] = 1 M. The molecular weight increased linearly with the conversion in good agreement with the theoretical values, and the polydispersities decreased with increasing conversion, reaching a lower limit of 1.11. The living character of the polymerization was confirmed by chain‐extension experiments. Block copolymers with N,N‐dimethylacrylamide and N‐isopropylacrylamide were also prepared. The use of a DMF/water mixed solvent should make possible the synthesis of new amphiphilic ionic block copolymers without the use of protecting group chemistry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4446–4454, 2005     

梳型接枝共聚物的合成（IV）-氯乙酸降冰片烯甲酯引发苯乙烯、甲基丙烯酸甲酯原子转移自由基聚合的研究

首次报道以自制氯乙酸降冰片烯甲酯（NMCA）为引发剂的苯乙烯、甲基丙烯酸 甲酯的原子转移自由基（ATRP）本体聚合。详细考察了单体转化与反应时间、产物 分子量及分子量分布间的关系。研究发现,此引发引发甲基丙烯酸甲酯ATRP反应所 得聚合物的分子量分布较宽（PDI = 1.80～2.45),且实测值（GPC）与理论值偏差 较大。而NMCA引发的苯乙烯的ATRP反应可得分子量分布较窄（PDI = 1.54)、实验 值（GPC）与理论值基本吻合的产物。单体转化率随反应时间的变化及产物分子量 随单体转化率变化研究证明这一聚合反应具有活性聚合反应特征。产物的NMR分析 证明所合成产物分子中降冰片烯环上双键未参与聚合反应。     

溴化铜对异丙醇铝存在下原子转移自由基聚合的影响

研究了以2-溴异丁酸乙酯为引发剂、溴化亚铜(CuX)/联二吡啶(bPy)/异丙醇铝[Al(OPrⁱ)₃]为三元复合催化体系,40℃下甲基丙烯酸甲酯(MMA)在环己酮中的原子转移自由基聚合,详细研究了溴化酮对聚合反应的影响.实验结果表明,以异丙醇铝为助催化剂,MMA可在较低温度下进行活性聚合;随着CuBr₂浓度的提高,自由基浓度降低,终止反应受到抑制;不加CuBr₂时,聚合物的分子量分布较宽(M_w/Mn);加入CuBr₂时,聚合物的分子量分布较窄(M_w/Mn=1.2～1.5),而且对数转化率与时间呈线性关系.     

原子转移自由基聚合制备PDMAEMA亲水作用色谱固定相及其性能评价

以甲基丙烯酸二甲氨乙酯为单体,2-溴异丁酰溴为引发剂,CuBr/五甲基二乙烯基三胺(PMDETA)为催化剂,通过原子转移自由基聚合(ATRP)反应,将甲基丙烯酸二甲氨乙酯(DMAEMA)接枝到5μm大孔硅胶表面上,得到了接枝聚合物(PDMAEMA)亲水作用色谱固定相.通过改变反应体系中单体的量,制备了三种不同接枝量的亲水作用色谱固定相,利用元素分析对所制备的固定相进行了表征.详细考察了该固定相的分离性能以及流动相中盐浓度、水含量对溶质保留行为的影响,并将该固定相用于宁心宝胶囊中核苷类化合物的分离和测定.在亲水模式下,该固定相可以基线分离7种核苷类化合物,保留时间随着接枝量的增加而增大,与氨基亲水作用色谱柱相比,该合成柱的分离效率高,溶质在该填料上的保留符合分配作用保留机理.实验结果表明,该填料具有良好的分离性能.     

RADICAL GRAFTING REACTIONS ONTO STARCH AND OTHER WATER-SOLUBLE COPOLYMERS IN ISOLATED GEL DROPLETS

A novel radical grafting copolymerization process has been designed for water-soluble polymers which avoids the problems of conducting grafting reactions in highly viscous polymerization media. A variety of water-soluble graft copolymers having starch or dextran as the backbone chain with grafted side chains of polyacrylamide (—AM—), poly (acrylic acid ) (—AA—), poly (acrylamide-co-acrylic acid) (—AM—NH_4AA—) or poly ( acrylamide-co-2-acryiamido-2-methyl-l-propanesulphinic acid) (—AM—AMPS—) have been synthesized in gel droplets using aceric sulphate redox initiator, and their properties compared. The reaction conditions were optimized taking into account reaction kinetic data and the observed properties of the products produced under different reaction conditions. The effects of the ratios of [backbone]/[graft monomer], [ AM]/[ AA]/[AMPS] , [Ce~(4+)]/[ S_2O_8=] and pH value on the reaction rate , conversion, grafting degree, grafted chain length and the product molecular weight have been investigated.     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002     

Atom Transfer Radical Polymerization of Methyl Methacrylate with α,α,α′,α′‐Tetrachloroxylene as an Initiator

The homogeneous ATRP of methyl methacrylate (MMA) using α,α,α′,α′‐tetrachloroxylene (TCX)/CuCl/N,N,N′,N″,N″–pentamethyldiethylenetriamine (PMDETA) as the initiating system has been successfully carried out. The kinetic plots showed first order relationship vs. monomer concentration. Well‐controlled polymerizations with low polydispersities (M_w/M_n=1.15?1.25) polymers have been achieved. The molecular weights increased linearly with monomer conversions and were close to the theoretical values, indicating high initiation efficiency. The polymerization rate increased significantly with an increase of TCX concentration. The rate of polymerization was about 0.6 orders with respect to the concentration of initiator. The polymerization rate increased significantly with an increase of CuCl concentration. The dependence of ln k_p ^app on ln ([CuCl]₀) indicated a 0.91 order. The apparent activation energy was calculated ΔE_app ^≠=43.3 KJ/mol, and the enthalpy of the equilibrium, ΔH_eq ⁰, was estimated to be 21.1 KJ/mol. The structure of obtained PMMA was analyzed by means of ¹H NMR spectroscopy. The result proved that the TCX acted as a bifunctional initiator for ATRP of MMA.     

Synthesis of tertiary-butyl acrylate polymers and preparation of diblock copolymers using atom transfer radical polymerization

The synthesis of tert-butyl acrylate by atom transfer radical polymerization (ATRP) is reported. This polymer was prepared using FeCl₂ · 4H₂O(PPh₃)₂ catalyst system in conjunction with methyl 2-bromopropionate as initiator, in bulk and in solution using acetone as a solvent. The addition of solvent was necessary in order to decrease the polymerization rate and to afford low polydispersity polymers. The number-average molecular weights of the resulting polymers increased in direct proportion to the monomer conversion, and the polydispersities (M_w/M_n) were as low as 1.2. In addition, the preparation of an AB diblock copolymer of poly (n-butyl methacrylate)-block-poly (tert-butyl acrylate) by ATRP is reported. The resulting polymers and copolymers were characterized by means of size exclusion chromatography and ¹H-NMR Spectroscopy.