Synthesis of D2 receptor ligand analogs incorporating one dicarba-closo-dodecaborane unit

Boron clusters, and especially dicarba-closo-dodecaboranes, can be used as hydrophobic pharmacophores in the design of new drugs and radiotracers. In the current Letter, analogs of enantiomeric substituted benzamides (Raclopride and FLB-457) in which the phenyl ring has been substituted by a carborane cage (either orto- or meta-carborane) have been developed as potential D₂ receptor antagonists. The formation of intramolecular hydrogen bonds (in solution) and the stability of the new chemical entities have been evaluated by means of ¹H NMR and HPLC-MS, respectively.     

Synthesis of the dopamine D2/D3 receptor agonist (+)-PHNO via supercritical fluid chromatography: preliminary PET imaging study with [3-C]-(+)PHNO

Carbon-11 labeled (+)-4-[1-¹¹C]propyl-3,4,4a,5,6,10b-hexahydro-2H-naphtho[1,2-b][1,4]oxazin-9-ol ([1-¹¹C]-(+)-PHNO) is a dopamine D₃-preferring agonist radiopharmaceutical used for medical imaging by positron emission tomography (PET). We report the synthesis of (+)-PHNO using supercritical fluid chromatography for enantiomeric resolution of its norpropyl derivative, HNO, followed by propylation. (+)-HNO was used to prepare the radiolabeling precursor, (+)-trans-4-acetyl-9-triisopropylsilyloxy-2,3,4a,5,6,10b-hexahydro-4H-naphth[1,2b][1,4]oxazine, in 12 steps. Modifications to the labeling procedure were made to ensure consistent preparation of [3-¹¹C]-(+)-PHNO via [¹¹C]CH₃I. A preliminary PET imaging study was carried out with this tracer in an attempt to image dopamine receptors in brown adipose tissue (brown fat) in vivo.     

Synthesis of 21-nor-22-oxa-1α,25-dihydroxyvitamin D3 derivatives in quest of a drug with low calcemic activity

Two 21-nor-22-oxa-1α,25-dihydroxyvitamin D₃ derivatives have been synthesized in quest of a drug with lower calcemic activity than Maxacalcitol, 22-oxa-1α,25-dihydroxyvitamin D₃, being used as antihyperparathyroidism and antipsoriatic drug. Of two 21-nor products obtained, the product carrying one carbon elongated side chain with diethylcarbinol moiety has been found to exhibit comparable differentiation-inducing activity to Maxacalcitol with much lower exhibition of calcemic activity.     

Magnetic poly(glycidyl methacrylate)-based microspheres prepared by suspension polymerization in the presence of modified La0.75Sr0.25MnO3 nanoparticles

With the aim of preparing new magnetic poly(glycidyl methacrylate) (PGMA) microspheres suitable for magnetic separation, La_0.75Sr_0.25MnO₃ nanoparticles were selected as a core material. In order to improve their compatibility with PGMA, the surface of the nanoparticles was treated with penta(methylethylene glycol) phosphate methacrylate (PMGPMA) as a stabilizer. Subsequently, the nanoparticles were encapsulated by the suspension polymerization of glycidyl methacrylate (GMA) resulting in a relatively homogeneous distribution of La_0.75Sr_0.25MnO₃ nanoparticle aggregates inside the polymer microspheres. Microspheres in the size range of a hundred micrometers with a broad particle size distribution were obtained. PMGPMA can be considered to be an efficient compatibilizer between La_0.75Sr_0.25MnO₃ nanoparticles and PGMA. Both PMGPMA-coated La_0.75Sr_0.25MnO₃ nanoparticles and magnetic PGMA microspheres were characterized in terms of morphology, particle size, composition and magnetic properties by the appropriate methods, such as X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), transmission electron microscopy (TEM), light microscopy and SQUID magnetometry.     

Non-centrosymmetric Ba3Ti3O6(BO3)2

The compound previously reported as Ba₂Ti₂B₂O₉ has been reformulated as Ba₃Ti₃B₂O₁₂, or Ba₃Ti₃O₆(BO₃)₂, a new barium titanium oxoborate. Small single crystals have been recovered from a melt with a composition of BaTiO₃:BaTiB₂O₆ (molar ratio) cooled between 1100°C and 850°C. The crystal structure has been determined by X-ray diffraction: hexagonal system, non-centrosymmetric space group, a=8.7377(11) Å, c=3.9147(8) Å, Z=1, wR(F²)=0.039 for 504 unique reflections. Ba₃Ti₃O₆(BO₃)₂ is isostructural with K₃Ta₃O₆(BO₃)₂. Preliminary measurements of nonlinear optical properties on microcrystalline samples show that the second harmonic generation efficiency of Ba₃Ti₃O₆(BO₃)₂ is equal to 95% of that of LiNbO₃.     

超细YF_3与GdF_3纳米晶的合成及其上转换发光

当使用液固溶法(LSS法)制备分散性纳米晶时,将传统油酸/油酸钠/酒精反应体系中的NaOH用氨水取代时,氨水将会与油酸形成新的表面活性剂油酸铵,这样就可以合成各种超细分散性的REF3纳米晶(RE代表稀土元素)。在这种新的反应体系中,合成了平均直径小于10 nm的YF3和GdF3超细颗粒,X射线与透射电镜测试表明YF3是正交相,而GdF3是面心立方结构,空间群为Fm3m,晶格常数为0.582 9 nm。在980 nm半导体激光器激发下,可检测到YF3∶Yb/Er在515~570 nm处有较强的绿色发光峰、645~675 nm处有较强的红色发光峰,呈橙色发光。YF3∶Yb/Tm和GdF3∶Yb/Tm样品在460~490 nm处有较强的蓝色发光峰,而在800 nm附近有更强的近红外发光峰。由于其超细的尺寸及红外上转换发光特性,合成的样品在生物成像、生物标签等方面有潜在的应用价值。     

超细YF3与GdF3纳米晶的合成及其上转换发光

当使用液固溶法（LSS法）制备分散性纳米晶时,将传统油酸/油酸钠/酒精反应体系中的NaOH用氨水取代时,氨水将会与油酸形成新的表面活性剂油酸铵,这样就可以合成各种超细分散性的REF₃纳米晶（RE代表稀土元素）。在这种新的反应体系中,合成了平均直径小于10nm的YF₃和GdF₃超细颗粒,X射线与透射电镜测试表明YF₃是正交相,而GdF₃是面心立方结构,空间群为Fm3m,晶格常数为0.5829nm。在980nm半导体激光器激发下,可检测到YF₃：Yb/Er在515~570nm处有较强的绿色发光峰、645~675nm处有较强的红色发光峰,呈橙色发光。YF：Yb/Tm和GdF₃：Yb/Tm样品在460~490nm处有较强的蓝色发光峰,而在800nm附近有更强的近红外发光峰。由于其超细的尺寸及红外上转换发光特性,合成的样品在生物成像,生物标签等方面有潜在的应用价值。     

一维纳米Co_3O_4,Ag/Co_3O_4及CuO/Co_3O_4的合成与电催化性能(英文)

采用水热合成法制备了Co3O4及复合Ag/Co3O4、CuO/Co3O4一维纳米产品。用XRD,FE-SEM和TEM手段对产品进行了表征。采用循环伏安法研究了合成产品修饰的玻碳电极在碱性溶液中对对硝基苯酚的电催化还原性能。与裸玻碳电极相比,1mmol·L-1的对硝基苯酚在用Co3O4、特别是CuO/Co3O4修饰的玻碳电极上还原的峰电流明显增大,用Ag/Co3O4(Ag/Co原子比分别为1∶5和2∶5)修饰的玻碳电极催化还原对硝基苯酚时,尽管还原峰电流增大不是太大,但其峰电位明显降低(分别降低0.265和0.371V)。     

一锅法制备Co3O4/g-C3N4复合光催化剂及其光催化性能

以三聚氰胺和六水合氯化钴为原料,一锅法制备Co_3O_4负载的多孔石墨相氮化碳(Co_3O_4/g-C_3N_4)复合光催化材料。采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)等手段对其结构和光学特性进行表征。以盐酸四环素(TC)为目标污染物,评价了不同负载量Co_3O_4/g-C_3N_4复合光催化剂的可见光催化性能。结果表明,所制备的Co_3O_4/g-C_3N_4复合光催化剂为多孔结构,其比表面积较大,并在可见光区域具有显著的吸收。利用原位生成的Co_3O_4纳米粒子在氮化碳表面形成异质结构,可有效转移光生载流子,降低光生电子-空穴的再结合率,从而提高光催化活性。并且存在最佳Co_3O_4复合量,当六水合氯化钴加入量为三聚氰胺的8%(w/w)时,所制备的复合光催化剂CoCN-8具有最佳的光催化性能。在可见光的照射下,60 min内可降解85%的TC,而同样条件下,纯g-C_3N_4仅降解23%的TC。     

碳包覆Li3V2(PO4)3:溶胶-凝胶法合成及性能

利用V₂O₅、LiOH·H₂O、H₂O₂、NH₄H₂PO₄与柠檬酸为原料,通过溶胶-凝胶法合成了碳包覆的Li₃V₂(PO₄)₃复合正极材料。采用XPS、XRD、SEM、TEM、拉曼光谱和电化学方法对材料的性能进行了研究。还研究了其结构与焙烧温度、样品电导率和电化学性能的关系。研究表明复合材料具有空间群为P2₁/n的单斜结构,表面包覆粗糙多孔的碳层。在800 ℃下制备的碳包覆样品的电子导电率高达9.81×10^-5 S·cm^-1,约为高温固相氢气还原法制备的未包覆碳Li₃V₂(PO₄)₃的10000倍。测试结果表明碳包覆Li₃V₂(PO₄)₃的电化学性能远优于未包覆碳的样品。在3.0～4.3 V电压范围内,以0.1C和2C倍率充放电时,碳包覆的Li₃V₂(PO₄)₃具有高比容量(分别为128和109 mAh·g^-1)和优异的循环性能。     

Synthesis and nonlinear optical properties of BaTi(BO3)2 and Ba3Ti3O6(BO3)2 crystals in glasses with high TiO2 contents

The ternary BaO-TiO₂-B₂O₃ glasses containing a large amount of TiO₂ (20-40 mol%) are prepared, and their optical basicities (Λ), the formation, structural features and second-order optical nonlinearities of BaTi(BO₃)₂ and Ba₃Ti₃O₆(BO₃)₂ crystals are examined to develop new nonlinear optical materials. It is found that the glasses with high TiO₂ contents of 30-40 mol% show large optical basicities of Λ=0.81-0.87, suggesting the high polarizabity of TiO_n polyhedra (n=4-6) in the glasses. BaTi(BO₃)₂ and Ba₃Ti₃O₆(BO₃)₂ crystals are found to be formed as main crystalline phases in the glasses. It is found that BaTi(BO₃)₂ crystals tend to orient at the surface of crystallized glasses. The new XRD pattern for the Ba₃Ti₃O₆(BO₃)₂ phase is proposed through Rietvelt analysis. The second harmonic intensities of crystallized glasses were found to be 0.8 times as large as α-quartz powders, i.e., I^2ω(sample)/I^2ω(α-quartz)=0.8, for the sample with BaTi(BO₃)₂ crystals and to be I^2ω(sample)/I^2ω(α-quartz)=68 for the sample with Ba₃Ti₃O₆(BO₃)₂ crystals. The Raman scattering spectra for these two crystalline phases are measured for the first time and their structural features are discussed.     

Li3V2(PO4)3的溶胶-凝胶合成及其性能研究

以LiOH·H₂O(LiF、Li₂CO₃、LiCH₃COO·2H₂O)、NH₄VO₃、H₃PO₄和柠檬酸为原料,采用Sol-gel法合成锂离子电池正极材料Li₃V₂(PO₄)₃。优化了锂源、溶胶的pH值、预烧条件、煅烧温度等合成条件,并采用XRD、SEM、恒电流充放电及循环伏安试验等方法,研究了所合成的Li₃V₂(PO₄)₃的结构形貌和电化学性能。结果表明,以LiOH·H₂O为锂源,溶胶的pH值等于3,于氩气氢气(体积比9∶1)混合气中300 ℃预烧 4 h,并在氩气氢气(体积比9∶1)混合气中600 ℃煅烧8 h合成的Li₃V₂(PO₄)₃正极材料为标准的单斜结构,具有较高的放电比容量和较好的循环稳定性,0.1C和1C倍率下首次放电比容量分别为130 mAh·g^-1和129 mAh·g^-1;1C倍率下循环40次后,容量仍为127 mAh·g^-1,容量保持率为98.4%;随后又进行10C倍率放电,10次循环后容量为105 mAh·g^-1,容量保有率达98.1%。循环伏安测试表明,该正极材料具有较好的电化学可逆性。     

A convergent total synthesis of antiplasmodial C2 symmetric (+)-ekeberin D4

The first concise total synthesis of C₂ symmetric (+)-ekeberin D₄ (1) that exhibits antiplasmodial activity has been achieved in total nine steps and 27% yield from the known diol 4. The efficient synthetic method features the regio- and diastereoselective epoxidation of 4 and convergent coupling between half fragments 2 and 3 by taking into account the C₂ symmetric property.     

Li3V2(PO4)3的溶胶-凝胶法合成及其性能研究

以LiOH·H₂O、NH₄VO₃、H₃PO₄和柠檬酸等为原料采用溶胶-凝胶法合成了锂离子二次电池正极材料磷酸钒锂(Li₃V₂(PO₄)₃)。考察了煅烧温度和配位剂种类等条件对产物组成及电化学性能的影响。研究了优化条件下制得样品的循环伏安、充放电性能和循环性能。0.1 C条件下,样品首次放电比容量达129.81 mAh·g^-1，经过100次循环后容量几乎没有衰减，仍保持在128 mAh·g^-1。X射线衍射研究表明合成单一Li₃V₂(PO₄)₃晶体所需温度比固相法低；并考察了循环20次后材料充电到各个单相的晶体结构，通过X射线衍射和最小二乘法计算给出了其晶胞参数变化过程，证实了循环嵌Li过程中晶体结构能够得到重现。     

可见光响应的Co3(PO4)2/Ag3PO4纳米复合光催化剂的制备及表征

采用简单的化学偏聚法合成出Ag₃PO₄纳米颗粒、磷酸钴（Co₃（PO₄）₂,CoP）纳米片以及它们两者的纳米复合结构（CoP/Ag₃PO₄）,同时还比较了它们的可见光催化活性. 采用场发射扫描电镜（FESEM）、X 射线衍射（XRD）、紫外-可见（UV-Vis）吸收光谱以及光致发光谱等手段对其形貌、结构、光学以及可见光催化性能等进行表征. 结果表明,CoP/Ag₃PO₄复合纳米结构的可见光降解甲基橙（MO）的速率和循环稳定性均明显优于其它两种物质. 这表明CoP应该起着共催化剂的作用,它能够抑制光生电子与空穴之间的复合,并且提供大量高活性的光生空穴. 此外,我们还发现CoP/Ag₃PO₄降解另一种阳离子型染料——罗丹明B（RhB）的能力则远不如纯Ag₃PO₄,这可能是与光催化剂的表面性质发生改变有关,造成更低的RhB吸附能力. 本文提供了一种廉价制备高效可见光催化剂的新方法.     

Fe2O3/Al2O3二元气凝胶合成高质量单壁纳米碳管

通过溶胶和超临界干燥方法制得了Fe₂O₃/Al₂O₃二元气凝胶，其比表面积和孔隙体积分别为246 m²·g^-1和1.89 cm³·g^-1，并具有较宽的孔径分布。以Fe₂O₃/Al₂O₃二元气凝胶作催化剂，通过甲烷催化裂解成功地合成了高质量的单壁纳米碳管。利用FESEM、TEM和HRTEM、Raman光谱等分析手段研究了反应温度对单壁纳米碳管生长的影响。结果表明在900 ℃时合成单壁纳米碳管的质量较高，并且合成的炭产物为毡状，该炭产物主要为高质量的单壁纳米碳管。     

A fast synthesis for Zintl phase compounds of Na3SbTe3, NaSbTe2 and K3SbTe3 by microwave irradiation

The microwave irradiation technique was used to prepare three Zintl phase compounds Na₃SbTe₃, NaSbTe₂ and K₃SbTe₃. The as-prepared products were analyzed and characterized by XRD, EDX and SEM techniques. Higher microwave oven power and shorter irradiation time are required for the synthesis of Na₃SbTe₃, whereas lower oven power and longer irradiation time are needed for NaSbTe₂. Moderate microwave irradiation conditions facilitate the formation of pure K₃SbTe₃. Pure phase of Na₃SbTe₃ are directly obtained by this technique for the first time. Compared with the traditional high-temperature solid-state synthesis, the microwave reaction required a considerable shortened reaction time for the preparation of the three Zintl compounds. The initial driving force for these reactions originates from the interaction of microwave electric field with alkali metals (Na and K) and Sb powders.     

TiO2/LaFeO3微纳米纤维的可控制备及光催化性能简

利用静电纺丝技术及水热合成法制备了TiO2/LaFeO3异质结构. 采用场发射扫描电子显微镜(FE-SEM),X射线衍射(XRD),傅里叶变换红外(FTIR)光谱和紫外-可见漫反射光谱(UV-Vis)等手段对TiO2/LaFeO3微纳米纤维的结构和表面形态进行表征. 通过亚甲基蓝(MB)光降解反应研究了其光催化性能. 结果表明,不完全碳化TiO2纤维表面的缺陷位点是LaFeO3纳米粒子的有利生长点. TiO2/LaFeO3异质结材料的带隙明显窄于TiO2,光催化活性得到提高;经140 min紫外光照射后,TiO2/LaFeO3异质结催化剂对MB的降解率为65.34%,分析和探讨了其光催化机理.     

Synthesis, crystal structure, spectrum properties, and electronic structure of a novel non-centrosymmetric borate, BiCd3(AlO)3(BO3)4

A novel non-centrosymmetric borate, BiCd₃(AlO)₃(BO₃)₄, has been prepared by solid state reaction methods below 750 °C. Single-crystal XRD analysis showed that it crystallizes in the hexagonal group P6₃ with a=10.3919(15) Å, c=5.7215(11) Å, Z=2. In its structure, AlO₆ octahedra share edges to form 1D chains that are bridged by BO₃ groups through sharing O atoms to form the 3D framework. The 3D framework affords two kinds of channels that are occupied by Bi³⁺/Cd²⁺ atoms only or by Bi³⁺/Cd²⁺ atoms together with BO₃ groups. The IR spectrum further confirmed the presence of BO₃ groups. Second-harmonic-generation measurements displayed a response of about 0.5×KDP (KH₂PO₄). UV-vis diffuse reflectance spectrum showed a band gap of about 3.19 eV. Solid-state fluorescence spectrum exhibited the maximum emission peak at around 390.6 nm. Band structure calculations indicated that it is an indirect semiconductor.     

Direct dynamics studies for the reactions of CF3CHFCF3 and CF3CF2CHF2 with H atoms

The rate constants of the hydrogen abstraction reactions of CF₃CHFCF₃ + H (R1) and CF₃CF₂CHF₂ + H (R2) have been calculated by means of the dual-level direct dynamics method. Optimized geometries and frequencies of stationary points and extra points along the minimum-energy path (MEP) are obtained at the MPW1K/6-311+G(d,p) level, and the classical energetic information is further corrected with the interpolated single-point energy (ISPE) approach by the G3(MP2) level of theory. Using the canonical variational transition state theory (CVT) with small-curvature tunneling corrections (SCT), the rate constants are evaluated over a wide temperature range of 200-2000 K. The calculated CVT/SCT rate constants are in good agreement with available experimental values. It is found that the variational effect is very small and almost negligible over the whole temperature region. However, the small-curvature tunneling correction plays an important role in the lower temperature range. Furthermore, the heats of formation of species CF₃CF₂CHF₂ (SC₁ or SC₂) and CF₃CF₂CF₂ are studied using isodesmic reactions to further elucidate the thermodynamic properties.