Study on the interaction of 5-pyridine-10,15,20-tris-(p-chlorophenyl)porphyrin with cyclodextrins and DNA by spectroscopy

The interaction of 5-pyridine-10,15,20-tris-(p-chlorophenyl)porphyrin (PyTPP) with beta-CD and TM-beta-CD were examined by UV-vis absorption, fluorescence and (1)H NMR spectroscopy. PyTPP prefers to form the 1:1 inclusion complex with TM-beta-CD but hardly form inclusion complex with beta-CD. An inclusion constant (K) for the formation of PyTPP-TM-beta-CD inclusion complex has been evaluated to be 4.4x10(3)L/mol from the absorbance changes. This K value is nearly the same as that 4.5x10(3)L/mol obtained from the fluorescence intensity changes. Compared to beta-CD, the inclusion ability of TM-beta-CD with PyTPP is stronger. It indicates that the hydrophobic effect plays an important role in the inclusion procedure. The mechanism of inclusion interaction was carried out by 1H NMR technique. Furthermore, the interaction of PyTPP with DNA is shown here. It can bind DNA by out-side stacking along the DNA helix but not by intercalation because of the high electron density in the porphyrin core. The binding constant and binding number of PyTPP to DNA are 4.3x10(3) and 1.3, respectively. The interaction of PyTPP with DNA was further carried out in the presence of TM-beta-CD. The significant decrease of the binding constant and binding number were observed and the interaction of porphyrin-bound DNA has been inhibited, which was due to the fact that PyTPP inter into the cavity of TM-beta-CD and influence binding affinity of PyTPP to DNA.     

Determination of the binding constant for the inclusion complex between procaine hydrochloride and beta-cyclodextrin by capillary electrophoresis

The apparent electrophoretic mobilities of procaine hydrochloride (μ_i) in a series of concentration of β-cyclodextrin were measured directly by capillary electrophoresis technology. A new mathematical treatment method is proposed, which based on the fact that the molar ratio of the inclusion complex was 1:1 established by spectrophotometry. Using the proposed method, the binding constant of the inclusion complex of procaine hydrochloride with β-cyclodextrin can be obtained easily. The determination result was in correspondence with those of the spectrophotometric and fluorescence methods.     

Spectroscopic studies on the inclusion behavior between caffenic acid and ��-cyclodextrin

To investigate the inclusion ability of ??-cyclodextrin (??-CD) for caffenic acid (CA). The conditions for the formation of inclusion complex and the binding constant between ??-CD and CA were determined by fluorescent and ultraviolet spectroscopic methods. The behavior of CA as a free radical scavenger before and after its inclusion was investigated. In addition, solid samples of the inclusion complex, prepared through the co-precipitation and grinding methods, were characterized via IR spectroscopy and differential scanning calorimetry. The inclusion complex was further characterized with ¹H NMR spectroscopy. By using fluorescent and ultraviolet spectroscopy, the conditions for the formation of inclusion complex between ??-CD and CA were optimized and the binding constant determined. It was observed that the guest molecule behaves as a better anti-oxidant after its inclusion into ??-CD.     

Resonance Rayleigh scattering technology as a new method for the determination of the inclusion constant of beta-cyclodextrin

The interaction of procaine hydrochloride and beta-cyclodextrin in aqueous solution was studied using resonance Rayleigh scattering technology. The molar ratio of the inclusion complex was 1:1 established by spectrophotometry. The resonance Rayleigh scattering technology was first applied in the determination of the beta-cyclodextrin inclusion constant. The inclusion constant of procaine hydrochloride beta-cyclodextrin complex Kf is 1.23 x 10(2) and 1.27 x 10(2) l mol(-1) for method I and 1.15 x 10(2) and 1.21 x 10(2) l mol(-1) for method II. These determination results were in correspondence with the results of the spectrophotometric and fluorescence methods. Therefore, the resonance Rayleigh scattering method can be used as a new technology for the determination of the inclusion constant.     

Binding constant determination of uranyl–citrate complex by ACE using a multi‐injection method

The binding constant determination of uranyl with small‐molecule ligands such as citric acid could provide fundamental knowledge for a better understanding of the study of uranyl complexation, which is of considerable importance for multiple purposes. In this work, the binding constant of uranyl–citrate complex was determined by ACE. Besides the common single‐injection method, a multi‐injection method to measure the electrophoretic mobility was also applied. The BGEs used contained HClO₄ and NaClO₄, with a pH of 1.98 ± 0.02 and ionic strength of 0.050 mol/L, then citric acid was added to reach different concentrations. The electrophoretic mobilities of the uranyl–citrate complex measured by both of the two methods were consistent, and then the binding constant was calculated by nonlinear fitting assuming that the reaction had a 1:1 stoichiometry and the complex was [(UO₂)(Cit)]^?. The binding constant obtained by the multi‐injection method was log K = 9.68 ± 0.07, and that obtained by the single‐injection method was log K = 9.73 ± 0.02. The results provided additional knowledge of the uranyl–citrate system, and they demonstrated that compared with other methods, ACE using the multi‐injection method could be an efficient, fast, and simple way to determine electrophoretic mobilities and to calculate binding constants.     

Study on the inclusion interaction of methylated-β-cyclodextrins with albendazole by spectrofluorimetry and its application

The inclusion interaction between three types of methylated-β-cyclodextrins （Me-β-CDs） and albendazole （ABZ） was studied by spectrofluorimetry. The result showed that Me-β-CDs reacted with ABZ to form an inclusion complex, 1： 1 stoichiometry for Me- β-CDs-ABZ complex was established and its association constant have been determined from fluorescence data by Benesi- Hildebrand＇s method （double reciprocal plots）. It was noted that 2,6-DM-β-CD exhibited stronger binding ability than other Me-β- CDs. Based on the significant enhancement of fluorescence intensity of inclusion complex, a simple and highly sensitive fluorimetric method is proposed for the determination of ABZ in the presence of 2,6-DM-β-CD. The proposed method was successfully applied to the determination of ABZ in tablets and human urine.     

Complexation study of diclofenac with beta-cyclodextrin and spectrofluorimetric determination

The inclusional complexation between the anti-inflammatory pharmaceutical diclofenac and beta-cyclodextrin (beta-CD) was studied by potentiometry, spectrophotometry and spectrofluorimetry, in both acid and neutral pH. Guest-host 1:1 stoichiometries for the complexes in both media were determined, and their equilibrium constants were calculated. The values obtained from the different methods used are in very good agreement and are in the order of 10(3). From the analysis of the pKa value for diclofenac in both the absence and presence of beta-CD (4.84 and 4.90 respectively), it was inferred that in the inclusion complex the carboxylic group is located outside the cavity. Further structural characterization of the inclusate was carried out by means of 1H NMR spectra and AM1 semiempirical calculations. Based on the obtained results, a spectrofluorimetric method for the determination of diclofenac in the presence of beta-CD was developed in the range of 0-5 micrograms ml-1. Better limits of detection (0.03 microgram ml-1) and quantification (0.1 microgram ml-1) were obtained in this latter case with respect to those obtained in the absence of beta-CD. The method was satisfactorily applied to the quantification of diclofenac in pharmaceutical preparations.     

Isothermal titration calorimetry (ITC) study of natural cyclodextrins inclusion complexes with drugs

Isothermal titration calorimetry (ITC) was used to characterize inclusion complex formation of natural cyclodextrins (α- and β-cyclodextrin) with three drugs ((+)brompheniramine, (±)brompheniramine, cyclopentolate) in aqueous solutions. ITC measurements were carried out at 298.15 K on a Microcal OMEGA ultrasensitive titration calorimeter (MicroCal Inc.). The experimental data were analyzed on the basis of the model of a single set of identical sites (ITC tutorial guide). β-CD forms inclusion complexes of stoichiometry 1:1 with the all investigated drugs. In turn, smaller molecule of α-CD forms inclusion complexes of two different stoichiometry: with bigger molecules ((+)brompheniramine and (±)brompheniramine) of a stoichiometry 2:1 and with smaller molecules (cyclopentolate) of a stoichiometry 1:2. Based on the experimental values of equilibrium constant (K) and enthalpy of complex formation (ΔH), the Gibbs energy of complex formation (ΔG), and the entropy of complex formation (ΔS), have been calculated, for all the investigated systems. Obtained results showed that complex formation of β-CD (bigger molecule with wider cavity compared to β-CD) with both (+)brompheniramine, (±)brompheniramine, and cyclopentolate is enthalpy driven while complexes of α-CD with the all investigated drugs are enthalpy-entropy stabilized. This indicated that the difference in the cavity dimensions is reflecting in different driving forces of complex formation and binding modes what resulted in different stoichiometry of the obtained inclusion complexes.     

Investigation of the Effect of Inclusion of Eriochrome Black T with β-Cyclodextrin on Its Complexation Reaction with Ca2+ and Mg2+ Using Rank Annihilation Factor Analysis

Rank annihilation factor analysis (RAFA) was used to investigate the effects of inclusion of eriochrome black T (EBT) on its complexation reaction with Ca²⁺ and Mg²⁺ at different pH values. Addition of β-cyclodextrin (β-CD) to Ca-EBT or Mg-EBT caused decomposition of the 1:1 metal complex and increase in EBT concentration in solution due to the formation of EBT-β-CD inclusion complex. In order to perform RAFA, concentration profiles were calculated by optimizing the value of the conditional stability constant and inclusion constant. The rank of original data matrix reduces by one by removing the information from the complex form (Ca-EBT or Mg-EBT). The performance of the method was evaluated by using synthetic data as well as experimental data and good results were obtained. The proposed method is capable of the simultaneous spectrophotometric determination of formation constant of a complex and the equilibrium constant of the competing reaction in solution.     

Comprehensive Characterisation of the Ketoprofen-β-Cyclodextrin Inclusion Complex Using X-ray Techniques and NMR Spectroscopy

Racemic ketoprofen (KP) and β-cyclodextrin (β-CD) powder samples from co-precipitation (1), evaporation (2), and heating-under-reflux (3) were analysed using X-ray techniques and nuclear magnetic resonance (NMR) spectroscopy. On the basis of NMR studies carried out in an aqueous solution, it was found that in the samples obtained by methods 1 and 2, there were large excesses of β-CD in relation to KP, 10 and 75 times, respectively, while the sample obtained by method 3 contained equimolar amounts of β-CD and KP. NMR results indicated that KP/β-CD inclusion complexes were formed and the estimated binding constants were approximately 2400 M⁻¹, showing that KP is quite strongly associated with β-CD. On the other hand, the X-ray single-crystal technique in the solid state revealed that the (S)-KP/β-CD inclusion complex with a stoichiometry of 2:2 was obtained as a result of heating-under-reflux, for which the crystal and molecular structure were examined. Among the methods used for the preparation of the KP/β-CD complex, only method 3 is suitable.     

Studies of curcumin and curcuminoids. XXXVI. The stoichiometry and complexation constants of cyclodextrin complexes as determined by the phase-solubility method and UV–Vis titration

Cyclodextrin (CD) complex stoichiometry and complexation constant with two symmetric curcuminoids and two unsymmetric curcuminoid-like compounds were investigated and compared by two independent methods, the phase-solubility method and ultraviolet-visible absorption spectroscopy (UV–Vis) titration. Two different methods were applied in an effort to increase the apparent intrinsic solubility of the compounds and make the investigation of stoichiometry and complexation constants possible. The intrinsic solubility could be determined for all four compounds in aqueous 10% (v/v) ethanolic solutions. Higher order complexation or solubilization through complex aggregation was observed for the symmetric molecules, while 1:1 complexation was observed for the unsymmetric molecules in the phase-solubility diagram. The UV–Vis investigation showed 1:1 complexation for all compounds, with some indication of higher order complexation for the symmetric molecules. Thus the stoichiometry found with the two methods correlated well for the unsymmetric, but not for the symmetric compounds where the phase-solubility investigations clearly indicated higher order complexation and possible aggregation of complexes. There was also a difference between the 1:1 complexation constants found with the two methods, especially for the compounds with low intrinsic solubility (i.e. the symmetric curcuminoids). However, they agree in the ranking of complexes according to the strength of the association. The 1:2 complexation constant observed with the phase-solubility method was more than 100 times the complexation constant found with the UV–Vis method, which explains why solubility is poorly predicted from the UV–Vis data. This discrepancy may be explained by solubilization by aggregation of complexes or some phenomena other than inclusion complexation.     

Aluminum sulphate hydrates

Three different calculation methods of deriving kinetic parameters (activation energy and preexponential factor) from dynamic TG data have been applied for the sulphate decomposition stage of the aluminum sulphate octadecahydrate. The constant rate experiments were carried out by Derivatograph and DuPont thermobalances. The three parameters estimation methods included a simple differential method, the classical Coats-Redfern and a new direct integral method. The fits of the curves obtained by these procedures were compared both graphically and numerically. It was found that the direct integral method gave the most satisfactory results. With the order type reaction models this method in each case produced the smallest residual deviation values and the best fitting curves compared to those obtained by the other two methods. The activation parameters calculated by the differential method were not acceptable at all, for the estimated curves were very far from the measured ones.     

荧光光谱结合多元曲线分辨-交替最小二乘法研究十二烷基三甲基溴化铵与牛血清白蛋白的相互作用

模拟pH=7.4的人体生理条件,用荧光光谱法结合多元曲线分辨-交替最小二乘法(MCR-ALS),研究表面活性剂十二烷基三甲基溴化铵(CTAB)与牛血清白蛋白(BSA)的相互作用。为增加实验数据的信息量,本实验采用顺序不同的两种滴加方式得到扩展的荧光光谱数据矩阵;进而采用渐进因子分析法(EFA)得到作用体系中各组分浓度变化曲线的初值,再应用MCR-ALS对该扩展荧光光谱矩阵进行迭代计算,较好地分辨出动态作用中各种物质的浓度变化趋势图,并由此曲线推断出CTAB与BSA的表观结合常数和结合比。     

Investigation of drug-cyclodextrin complexes by a phase-distribution method: some theoretical and practical considerations

The purpose of the study was to evaluate an octanol-water phase distribution method for investigation of drug/cyclodextrin (D/CD) complexes and to compare stability constant values obtained by this method to values obtained by the phase solubility method. A general equation for determination of 1 : 1 D/CD complex stability constant (K1 : 1) from the slope of a phase-distribution diagram (a diagram of the reciprocal of the apparent partition coefficient vs. the total CD concentration) was derived. The equation accounted for the possible inclusion of the organic solvent in the CD cavity and the gradual saturation of the CD binding with increasing concentration of the guest compound. This method was used to determine K1 : 1 for 2-hydroxypropyl-beta-cyclodextrin (HPbetaCD) complexes of hydrocortisone, prednisolone, diazepam, beta-estradiol and diethylstilbestrol. These values were comparable to K1 : 1 values determined by the phase-solubility method. The phase-distribution method could also be applied to determine stability constants for the neutral and ionic forms of the weakly acidic drugs, naproxen and triclosan and the weakly basic drug lidocaine. The phase-distribution method is a very versatile and fast method and has the advantage, compared to the phase-solubility method, that it only requires very small drug samples. Thus, this method would be suitable for screening of new drug candidates.     

Interaction of 1-methyl-1-({2-[4-(trifluoromethyl)phenyl]-1,3-thiazol-4-yl}methyl) piperidinium chloride with β-CD: spectroscopic,calorimetric and molecular modeling approaches

Spectroscopic investigation supported by molecular modeling methods has been used to describe the inclusion complex of β-cyclodextrin (β-CD) with 1-Methyl-1-({2-[4-(trifluoromethyl)phenyl]-1,3-thiazol-4-yl}methyl) piperidinium chloride (1MPTMPC) in solution and in solid state. The formation of inclusion complex between the β-CD and the 1MPTMPC has been investigated both in solution and in the solid state. Solution-state complexation between the 1MPTMPC and β-CD was established using ¹H NMR spectroscopy and isothermal titration calorimetry (ITC). From the ¹H NMR spectroscopic studies, 1:1 complex stoichiometry was deduced with an association constant (K) of 925 M^?1. Using an independent binding model, the ITC technique provides a K value of the same order with the one determined by NMR and the thermodynamic parameters ΔH, ΔS and ΔG which reveals driving forces involved during complex formation. The formation of the solid inclusion compound was confirmed by X-ray powder diffraction and differential scanning calorimetry. The most probable conformation of the inclusion complex obtained through a molecular docking investigation corroborates well to ROESY experiment.     

Supramolecular Interaction of Primaquine with Native β-Cyclodextrin

The supramolecular host–guest inclusion complex of Primaquine (PQ) with the nano-hydrophobic cavity of beta-cyclodextrin (β-CD) was prepared by physical mixing, kneading and co-precipitation methods. The formation of an inclusion complex in PQ with β-CD in the solution phase has been confirmed by UV–visible and fluorescence spectroscopy. The stoichiometry of the inclusion complex is 1:1; the Primaquine molecule is deeply entrapped in the cavity of β-cyclodextrin, which was confirmed by analysis of spectral shifts and corresponding absorbance and fluorescence intensities. The Benesi–Hildebrand plot was used to calculate the binding constant of the inclusion complex of PQ with β-CD at room temperature. The Gibbs energy change of the inclusion complex process has been calculated. The \( {\text{p}}K_{\text{a}} \) and \( {\text{p}}K_{\text{a}}^{*} \) for the monocation and neutral equilibrium of PQ in aqueous and β-CD media are discussed. The thermal stability for the inclusion complex of PQ with β-CD has been analyzed using differential scanning calorimetry. The modification of the crystal structure to amorphous for the solid inclusion complex was confirmed by powder X-ray diffraction. The structure of the complex is proposed by docking studies using the Patch-Dock server. A cytotoxic analysis was also carried out for the pure PQ and its solid complex on the MDA MB 231 cell line and showed that the activity is good for both substances. The cytotoxicity neither improved nor decreased with the formation of the inclusion complex with β-CD.     

Thermal behaviour and kinetic study of some triazoles as potential anti-inflammatory agents

Thermogravimetric (TG), differential thermogravimetric analysis and differential scanning calorimetry had been used to characterize the thermal stability of four new heterocyclic compounds with triazolic structure. The four analysed compounds have similar thermal behaviours, namely the thermal mal curves of these new compounds show three thermal events. These compounds were thermally stable up to 110 °C. Above this temperature, the evolution of hydrochloric acid took place as observed by EGA. Identification and the monitoring of gaseous species released during thermal decomposition of pure triazoles in air atmosphere have been carried out by coupled TG–FTIR. Between 110 and 220 °C the main gaseous product is HCl which was identified on the basis of these FTIR spectra. Arguments for a rapid thermooxidation of the four molecules were brought by EGA by identifying the substances which arise from both the destruction of side chains and of triazolic ring. The kinetic analysis of the destruction process of triazolic structure was investigated using the TG data in air for the substance’s decomposition in non-isothermal conditions. The isoconversional methods, Kissinger–Akahira–Sunose, Flynn–Wall–Ozawa and Friedman, were applied to determine the activation energy from the analysis of four curves measured at different heating rates. In order to obtain realistic kinetic parameters, even if the decomposition process is a complex one, the non-parametric kinetics method was also used. A good agreement between the data obtained from the four applied methods was found.     

2'-hydroxychalcone as an analytical reagent for beryllium

Several o-hydroxychalcones were examined to develop specific reagents for the precipitation of beryllium in the presence of elements such as aluminium and iron, which occur in its ores. All these reagents showed specificity only in the presence of EDTA. Among them, the readily obtainable 2'-hydroxychalcone is proposed as a new specific reagent for beryllium. The chalcone complex can be dried to constant weight at 105-110 degrees and the conversion factor is 0.01978. A probable structure for the complex has been suggested. Quantitative separation of beryllium from aluminium and iron carried out by this method gave good results. This method was applied for the gravimetric determination of beryllium in beryl and the results were in good agreement with those obtained by the oxide and pyrophosphate methods.