One‐Pot Synthesis of Carbon‐Coated Nanostructured Iron Oxide on Few‐Layer Graphene for Lithium‐Ion Batteries

Nanostructure engineering has been demonstrated to improve the electrochemical performance of iron oxide based electrodes in Li‐ion batteries (LIBs). However, the synthesis of advanced functional materials often requires multiple steps. Herein, we present a facile one‐pot synthesis of carbon‐coated nanostructured iron oxide on few‐layer graphene through high‐pressure pyrolysis of ferrocene in the presence of pristine graphene. The ferrocene precursor supplies both iron and carbon to form the carbon‐coated iron oxide, while the graphene acts as a high‐surface‐area anchor to achieve small metal oxide nanoparticles. When evaluated as a negative‐electrode material for LIBs, our composite showed improved electrochemical performance compared to commercial iron oxide nanopowders, especially at fast charge/discharge rates.     

Needle-like cobalt phosphide arrays grown on carbon fiber cloth as a binder-free electrode with enhanced lithium storage performance

Cobalt phosphide(CoP) is a promising anode candidate for lithium-ion batteries(LIBs) due to its high specific capacity and low working potential.However,the poor cycling stability and rate performance,caused by low electrical conductivity and huge volume variation,impede the further practical application of CoP anode materials.Herein,we report an integrated binder-free electrode featuring needle-like CoP arrays grown on carbon fiber cloth(CC) for efficient lithium storage.The as-prepared CoP/CC electrode integrates the advantages of 1 D needle-like CoP arrays for efficient electrolyte wettability and fast cha rge transpo rtation,and 3 D CC substrate for superior mechanical stability,flexibility and high conductivity.As a result,the CoP/CC electrode delivers an initial specific capacity of 1283 mAh/g and initial Coulombic effeciencies of 85.4%,which are much higher than that of conventional CoP electrode.Notably,the Co P/CC electrode shows outstanding cycling performance up to 400 cycles at 0.5 A/cm² and excellent rate performance with a discharge capacity of 549 mAh/g even at 5 A/cm².This work demonstrates the great potential of integrated CoP/CC hybrid as efficient bind-free and freestanding electrode for LIBs and future flexible electronic devices.     

Exfoliated and reorganized graphite oxide on titania nanoparticles as an auxiliary co-catalyst for photocatalytic solar conversion

The hybrid of graphite oxide (GO)/TiO(2) was prepared through the spontaneous exfoliation of bulky graphite oxide and reorganization with TiO(2) nanoparticles as a solar conversion and hydrogen-generating photocatalyst. GO/TiO(2) showed enhanced activities for both photocurrent generation (in an electrode form) and hydrogen production (in a slurry form) than those of bare TiO(2) under UV light irradiation. The enhanced photocatalytic activity of GO/TiO(2) is ascribed to the ability of graphitic layers in accepting and transporting electrons from excited TiO(2), promoting the charge separation. When GO was hybridized with platinized TiO(2) (Pt/TiO(2)), it showed a marked synergistic effect for the photocatalytic hydrogen production compared with GO/TiO(2) and Pt/TiO(2). This indicates that the cheap and abundant carbon material can be a good candidate for an electron attracting reservoir and an auxiliary co-catalyst for the photocatalytic hydrogen production.     

基于水凝胶衍生的硅/碳纳米管/石墨烯纳米复合材料及储锂性能

通过氧化石墨烯(GO)和壳聚糖(Cs)之间的氢键以及静电作用形成GO水凝胶,从而将纳米硅颗粒和碳纳米管(CNT)原位包封于其中,再经冷冻干燥及随后的热处理制得三维硅/碳纳米管/石墨烯(Si-CNT@G)纳米复合材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)、热重分析(TGA)等技术对制得样品的物相、结构和微观形貌等进行了表征。结果表明,所得复合材料在CNT纵横交织的石墨烯网络中,均匀地分布着纳米硅颗粒。当作为锂离子电池的负极材料时,在两种碳介质的协同作用下,有效缓冲硅材料在充放电过程中脱/嵌锂引起的体积变化,缩短了锂离子和电子传输的距离,Si-CNT@G复合材料表现出较好的循环稳定性以及倍率性能。在500 m A·g~(-1)的充放电电流密度下,经过200圈循环后,其放电比容量仍高达673.7 m Ah·g~(-1),容量保持率高达97%;即使将充放电电流密度升至2000 m A·g~(-1)时,该复合材料仍保持有566.9 m Ah·g~(-1)的高可逆放电比容量。独特的制备方法和优越的储锂性能,使得Si-CNT@G纳米复合材料成为理想的高性能锂离子电池负极材料的候选.     

层状钒青铜纳米片的制备及其锂离子电池阳极材料性能

室温下, 在水溶液中将铵根离子和水分子插入到商用V₂O₅纳米颗粒的层间, 制得了层状的钒青 铜[(NH₄)₂V₆O₁₆·H₂O]纳米片. 该纳米片的尺寸为2~10 μm, 厚度为50~250 nm. 与商用V₂O₅纳米颗粒相比, (NH₄)₂V₆O₁₆·H₂O纳米片用作锂离子电池(LIBs)的阳极材料时, 其性能得到较大提升, 包括大的可逆放电容量 (0.1 A/g时为1148 mA·h/g)、 出色的循环性能(循环70圈后在0.1 A/g时具有1002 mA·h/g的高容量)和高倍率性能(在0.1 A/g时具有1070 mA·h/g的可逆性能). 研究结果表明, (NH₄)₂V₆O₁₆·H₂O纳米片可以作为锂离子电池优良的阳极材料, 也有望应用于其它(如钠离子电池和锌离子电池等)可再充电电池.     

Synthesis of iron oxide cubes/reduced graphene oxide composite and its enhanced lithium storage performance

Fe₃O₄ is considered as a promising electrode material for lithium-ion batteries(LIBs) due to its low cost and high theoretical capacity(928 mAh/g).Nevertheless,the huge volume expansion and poor conductivity seriously hamper its practical applications.In this study,we use a facile hydrothermal reaction together with a post heat treatment to construct the three-dimensional heterostructured composite(Fe₃O₄/rGO) inwhich reduced graphene oxide sheets wraped the Fe₃O₄ submicron cubes as the conductive network.The electric conduction and electrode kinetics of lithium ion insertion/extraction reaction of the composite is enhanced due to the assist of conductive rGO,and thus the Listorage performance is obviously improved.The composite exhibits a reversible charge capacity of772.1 mAh/g at the current density of 0.1 A/g,and the capacity retention reaches 70.3% after400 cycles at0.5 A/g,demonstrating obviously higher specific capacity and rate capability over the Fe₃O₄ submicron cubes without rGO,and much superior cycling stability to the parent Fe_2 O_3 submicron cubes without rGO.On the other hand,as a synergic conductive carbon support,the flexible rGO plays an important role in buffering the large volume change during the repeated discharge/charge cycling.     

Binder-free carbon fiber/TiNb2O7 composite electrode as superior high-rate anode for lithium ions batteries

Carbon fibre supported titanium niobium oxide (TiNb₂O₇) composite electrodes are prepared via a simple solvothermal method and show superior high-rate performance with large capacity and good cycling performance.     

A novel synthesis of Nb_2O_5@rGO nanocomposite as anode material for superior sodium storage

The development of novel anode materials,with superior rate capability,is of utmost significance for the successful realization of sodium-ion batteries(SIBs).Herein,we present a nanocomposite of Nb_2 O_5 and reduced graphene oxide(rGO) by using hydrothermal-assisted microemulsion route.The water-in-oil microemulsion formed nanoreactors,which restrained the particle size of Nb_2 O_5 and shortened the diffusion length of ions.Moreover,the rGO network prevented agglomeration of Nb_2 O_5 nanoparticles and improved electronic conductivity.Consequently,Nb_2 O_5@rGO nanocomposite is employed as anode material in SIBs,delivering a capacity of 195 mAh/g after 200 charge/discharge cycles at 0.2 A/g.Moreover,owing to conductive rGO network,the Nb_2 O_5@rGO electrode rende red a specific capacity of 76 mAh/g at high current density of 10 A/g and maintained 98 mAh/g after 1000 charge/discharge cycles at 2 A/g.The Nb_2 O_5@rGO electrode material prepared by microemulsion method shows promising possibilities for application of SIBs.     

Ni3S2@碳纳米管复合材料的制备及其储钠性能

采用一步固相煅烧工艺制备了碳纳米管原位封装Ni₃S₂纳米颗粒（Ni₃S₂@CNT）,并研究了其作为钠离子电池（SIBs）负极材料的电化学性能. 通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、循环伏安测试、恒流充放电以及交流阻抗等研究了Ni₃S₂@CNT的物相结构、形貌特征以及电化学性能. 电化学测试表明,材料在100 mA·g ^-1电流密度下,放电容量可以达到541.6 mAh·g ^-1,甚至在2000 mA·g ^-1的大电流密度下其放电比容量也可以维持在274.5 mAh·g ^-1. 另外,材料在100 mA·g ^-1电流密度下,经过120周充放电循环后其放电和充电比容量仍然可以保持在374.5 mAh·g ^-1和359.3 mAh·g ^-1,说明其具有良好倍率性能和循环稳定性能. 良好的电化学性能归因于这种独特的碳纳米管原位封装Ni₃S₂纳米颗粒结构. 碳纳米管不但可以提高复合材料的导电性,也可以缓冲Ni₃S₂纳米颗粒在反复充放电过程中产生的体积膨胀效应,明显改善了Ni₃S₂@CNT负极复合材料的电化学性能.     

Fe2O3/TiO2纳米管的制备及其光电催化降解染料废水性能

采用阴极电沉积和阳极氧化法制备了Fe2O3改性TiO2纳米管(Fe2O3/TiO2-NTs)电极,运用场发射扫描电子显微镜、透射电子显微镜、X射线衍射和紫外-可见漫反射光谱等手段对其进行了表征,考察了其光电化学性能,并研究了复合电极光电催化降解甲基橙染料废水的反应性能.结果表明,Fe2O3的负载成功地将TiO2-NTs的光响应区间拓宽到可见光区域,Fe2O3/TiO2-NTs复合电极的光电流密度达到TiO2-NTs电极的3倍.在光电催化反应中,Fe2O3/TiO2-NTs复合电极对甲基橙的脱色效果明显优于TiO2-NTs电极,以Fe2O3/TiO2-NTs为阳极,光照5min,甲基橙溶液的脱色率可达90%以上.     

Enhanced electrochemical performance of SnS nanoparticles/CNTs composite as anode material for sodium-ion battery

SnS/CNTs composite as anode for SIBs exhibits high reversible capacity, good cyclability as well as rate performance, which is superior to that of pure SnS. The enhanced electrochemical performance can be attributed to the adding of CNTs as a flexible and conductive structure supporter and the formation of SnS nanoparticles with small diameter.     

TiO2@MWNTs纳米复合材料的制备及其储锂性能

以TiOSO4为钛源,多壁碳纳米管(MWNTs)为载体,溶剂热法制备了多壁碳纳米管/二氧化钛纳米复合材料(TiO2@MWNTs),并利用XRD,SEM,TEM,N2吸附-脱附和TG-DSC等测试手段对合成产物的结构和形貌进行表征,用恒流充放电测试研究TiO2@MWNTs纳米复合材料的储锂性能.N2吸附-脱附曲线和孔径分布曲线证实TiO2@MWNTs存在多级孔道结构以及较大的比表面积.电化学测试结果表明,与纯TiO2颗粒相比,TiO2@MWNTs纳米复合材料具有更好的容量保持率和倍率性能.在1 C倍率下,复合材料的可逆容量为200 mAh?g-1,循环100圈后容量仍达182 mAh?g-1,即使在10 C大倍率下,容量约为100 mAh?g-1左右.     

Preparation of nanoporous MgO-coated TiO2 nanoparticles and their application to the electrode of dye-sensitized solar cells

Sol-gel-derived Mg(OH)(2) gel was coated onto TiO(2) nanoparticles, and the subsequent thermal topotactic decomposition of the gel formed a highly nanoporous MgO crystalline coating. The specific surface area of the electrode that was prepared from the core-shell-structured TiO(2) nanoparticles significantly increased compared with that of the uncoated TiO(2) electrode. The increase in the specific surface area of the MgO-coated TiO(2) electrode was attributed to the highly nanoporous MgO coating layer that resulted from the topotactic reaction. Dye adsorption behavior and solar cell performance were significantly enhanced by employing the MgO-coated TiO(2) electrode. Optimized coating of a MgO layer on TiO(2) nanoparticles enhanced the energy conversion efficiency as much as 45% compared to that of the uncoated TiO(2) electrode. This indicates that controlling the extrinsic parameters such as the specific surface area is very important to improve the energy conversion efficiency of TiO(2)-based solar cells.     

Photoassisted charge behavior of hydrogen storage alloy-TiO2/Pt electrodes

The photoassisted charge behavior of hydrogen storage alloy modified with TiO2/Pt nanocomposites (HSA-TiO2/Pt electrode) was investigated. The HSA-TiO2/Pt electrode can be photocharged under current. The mechanism of photoassisted behavior of the HSA-TiO2/Pt electrode was explained through the results of cyclic voltammogram and impedance measurements of the HSA-TiO2/Pt electrode. Upon illumination, the photogenerated electrons can charge the electrode, but the photogenerated holes may oxidize the hydrogen storage alloy to form a layer of metal oxide. Because the current could keep the electrode active, the H atoms produced by photogenerated electrons diffused to the hydrogen storage alloy and a metal hydride formed. The electrode delivered a higher discharge capacity due to the assistance of photocharge.     

Design of hierarchical and mesoporous FeF3/rGO hybrids as cathodes for superior lithium-ion batteries

Iron fluoride (FeF₃) is considered as a promising cathode material for Li-ion batteries (LIBs) due to its high theoretical capacity (712 mAh/g) with a 3e^? transfer. Herein, we have designed a strategy of hierarchical and mesoporous FeF₃/rGO hybrids for LIBs, where the hollow FeF₃ nanospheres are the main contributor to the specific capacity and the 2D rGO nanosheets are the matrix elevating the electronic conductivity and buffering the volume expansion. The unique FeF₃/rGO hybrid can be rationally synthesized by a non-aqueous in-situ precipitation method, offering the merits of large specific surface area with rich active sites, fast transport channels for lithium ions, effective alleviation of volume expansion during cycles, and accelerating the electrochemical reaction kinetics. The FeF₃/rGO hybrid electrode possesses a high initial discharge capacity of 553.9 mAh/g at a rate of 0.5 C with 378 mAh/g after 100 cycles, acceptable rate capability with 168 mAh/g at 2 C, and feasible high-temperature operation (320 mAh/g at 70 °C). The superior electrochemical behaviors presented here demonstrates that the FeF₃/rGO hybrid is a potential electrode for LIBs, which may open up a new vision to design high-efficiency energy-storage devices such as LIBs based on transition metal fluorides.     

层状钛硅酸盐化合物作为锂离子电池负极储能材料

锂离子二次电池是手提设备的重要电力来源。近年来,人们为了寻找更新颖更好的锂离子电极材料,开始研究晶形离子交换材料,这种材料具有开放孔道,能够让离子在多孔框架里自由的进出。一种具有层状结构的钛硅酸盐Na-JDF-L1(Na₄Ti₂Si₈O₂₂·4H₂O)经过离子交换后被用作锂离子负极材料。它在循环200次后放电容量保持在364 mAh·g^-1,并且库伦效率约为100%。通过将TiO₂引入Li(Na)-JDF-L1中,有效的提高了材料的首次库伦效率和倍率放电性能。     

Direct electrochemistry and electrochemical catalysis of myoglobin-TiO2 coated multiwalled carbon nanotubes modified electrode

TiO(2) nanoparticles were homogeneously coated on multiwalled carbon nanotubes (MWCNTs) by hydrothermal deposition, and this nanocomposite might be a promising material for myoglobin (Mb) immobilization in view of its high biocompatibility and large surface. The glassy carbon (GC) electrode modified with Mb-TiO(2)/MWCNTs films exhibited a pair of well-defined, stable and nearly reversible cycle voltammetric peaks. The formal potential of Mb in TiO(2)/MWCNTs film was linearly varied in the range of pH 3-10 with a slope of 48.65 mV/pH, indicating that the electron transfer was accompanied by single proton transportation. The electron transfer between Mb and electrode surface, k(s) of 3.08 s(-1), was greatly facilitated in the TiO(2)/MWCNTs film. The electrocatalytic reductions of hydrogen peroxide were also studied, and the apparent Michaelis-Menten constant is calculated to be 83.10 microM, which shows a large catalytic activity of Mb in the TiO(2)/MWCNTs film to H(2)O(2). The modified GC electrode shows good analytical performance for amperometric determination of hydrogen peroxide. The resultant Mb-TiO(2)/MWCNTs modified glassy carbon electrode exhibited fast amperometric response to hydrogen peroxide reduction, long term life and excellent stability. Finally the activity of the sensor for nitric oxide reduction was also investigated.     

球形Sn-SnSb合金纳米粒子制备及其储锂性能

锂离子电池Sn负极材料有较高的比容量,但其容量随周期循环急剧衰减. 若Sn与Sb形成SnSb合金可以改善其循环性能. 本文采用有机液相还原方法制备了球形Sn-SnSb合金纳米粒子,其首周期循环充电容量1235.9 mAh·g^-1,放电容量为785.9 mAh·g^-1,经过50周的循环之后其放电容量保持在409.2 mAh·g^-1,表现出较好的循环性能.     

层状钛硅酸盐化合物作为锂离子电池负极储能材料

锂离子二次电池是手提设备的重要电力来源。近年来, 人们为了寻找更新颖更好的锂离子电极材料, 开始研究晶形离子交换材料, 这种材料具有开放孔道, 能够让离子在多孔框架里自由的进出。一种具有层状结构的钛硅酸盐Na-JDF-L1(Na₄Ti₂Si₈O₂₂·4H₂O)经过离子交换后被用作锂离子负极材料。它在循环200次后放电容量保持在364 mAh·g^-1, 并且库伦效率约为100%。通过将TiO₂引入Li(Na)-JDF-L1中, 有效的提高了材料的首次库伦效率和倍率放电性能。     

Constructing oxygen-deficient V2O3@C nanospheres for high performance potassium ion batteries

Potassium ion batteries (PIBs) have been regarded as promising alternatives to lithium ion batteries (LIBs) on account of their abundant resource and low cost in large scale energy storage applications. However, it still remains great challenges to explore suitable electrode materials that can reversibly accommodate large size of potassium ions. Here, we construct oxygen-deficient V₂O₃ nanoparticles encapsulated in amorphous carbon shell (O_d-V₂O₃@C) as anode materials for PIBs by subtly combining the strategies of morphology and deficiency engineering. The MOF derived nanostructure along with uniform carbon coating layer can not only enables fast K⁺ migration and charge transfer kinetics, but also accommodate volume change and maintain structural stability. Besides, the introduction of oxygen deficiency intrinsically tunes the electronic structure of materials according to DFT calculation, and thus lead to improved electrochemical performance. When utilized as anode for PIBs, O_d-V₂O₃@C electrode exhibits superior rate capability (reversible capacities of 262.8, 227.8, 201.5, 179.8, 156.9 mAh/g at 100, 200, 500, 1000 and 2000 mA/g, respectively), and ultralong cycle life (127.4 mAh/g after 1000 cycles at 2 A/g). This study demonstrates a feasible way to realize high performance PIBs through morphology and deficiency engineering.