Laser desorption/ionization mass spectrometry of dye‐sensitized solar cells: identification of the dye‐electrolyte interaction

Dye‐sensitized solar cells (DSCs) have great potential to provide sustainable electricity from sunlight. The photoanode in DSCs consists of a dye‐sensitized metal oxide film deposited on a conductive substrate. This configuration makes the photoanode a perfect sample for laser desorption/ionization mass spectrometry (LDI‐MS). We applied LDI‐MS for the study of molecular interactions between a dye and electrolyte on the surface of a TiO₂ photoanode. We found that a dye containing polyoxyethylene groups forms complexes with alkali metal cations from the electrolyte, while a dye substituted with alkoxy groups does not. Guanidinium ion forms adducts with neither of the two dyes. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Organic Dyes with Various Electron‐Accepting Substituents for p‐Type Dye‐Sensitized Solar Cells

Four new donor‐π‐acceptor dyes differing in their acceptor group have been synthesized and employed as model systems to study the influence of the acceptor groups on the photophysical properties and in NiO‐based p‐type dye‐sensitized solar cells. UV/Vis absorption spectra showed a broad range of absorption coverage with maxima between 331 and 653 nm. Redox potentials as well as HOMO and LUMO energies of the dyes were determined from cyclic voltammetry measurements and evaluated concerning their potential use as sensitizers in p‐type dye‐sensitized solar cells (p‐DSCs). Quantum‐chemical density functional theory calculations gave further insight into the frontier orbital distributions, which are relevant for the electronic processes in p‐DSCs. In p‐DSCs using an iodide/triiodide‐based electrolyte, the polycyclic 9,10‐dicyano‐acenaphtho[1,2‐b]quinoxaline (DCANQ) acceptor‐containing dye gave the highest power conversion efficiency of 0.08 %, which is comparable to that obtained with the perylenemonoimide (PMI)‐containing dye. Interestingly, devices containing the DCANQ‐based dye achieve a higher V_OC of 163 mV compared to 158 mV for the PMI‐containing dye. The result was further confirmed by impedance spectroscopic analysis showing higher recombination resistance and thus a lower recombination rate for devices containing the DCANQ dye than for PMI dye‐based devices. However, the use of the strong electron‐accepting tricyanofurane (TCF) group played a negative role in the device performance, yielding an efficiency of only 0.01 % due to a low‐lying LUMO energy level, thus resulting in an insufficient driving force for efficient dye regeneration. The results demonstrate that a careful molecular design with a proper choice of the acceptor unit is essential for development of sensitizers for p‐DSCs.     

Effect of coadsorbent properties on the photovoltaic performance of dye-sensitized solar cells

Stearic acid as a coadsorbent, which has a low dipole moment and high solubility, retarded the rate of dye adsorption during the competitive anchoring process on the TiO(2) layer in dye-sensitized solar cells (DSCs), thereby increasing the content of strongly bound dye on the TiO(2) surface. This resulted in an approximately 25% improvement in both J(SC) and the power conversion efficiency of the DSCs, even for much lower dye coverage.     

Hierarchically Structured ZnO Nanorods as an Efficient Photoanode for Dye‐Sensitized Solar Cells

Hierarchical ZnO nanorods composed of interconnected nanoparticles, which were synthesized by controlling precursor concentrations in a solvothermally assisted process, were exploited as photoanodes in dye‐sensitized solar cells (DSCs). The as‐prepared hierarchical nanorods showed greatly enhanced light scattering compared to ZnO nanoparticles for boosting light harvesting while maintaining sufficient dye‐adsorption capability. The charge‐transfer characteristics were studied by electrochemical impedance measurements, and reduced electron recombination and longer electron lifetime were observed for the ZnO nanorods. Photovoltaic characterization demonstrated that DSCs utilizing the hierarchical nanorods significantly improved the overall conversion efficiency by 34 % compared to nanoparticle‐based DSCs.     

Theoretical rationalization for reduced charge recombination in bulky carbazole‐based sensitizers in solar cells

The search for greater efficiency in organic dye‐sensitized solar cells (DSCs) and in their perovskite cousins is greatly aided by a more complete understanding of the spectral and morphological properties of the photoactive layer. This investigation resolves a discrepancy in the observed photoconversion efficiency (PCE) of two closely related DSCs based on carbazole‐containing D–π–A organic sensitizers. Detailed theoretical characterization of the absorption spectra, dye adsorption on TiO₂, and electronic couplings for charge separation and recombination permit a systematic determination of the origin of the difference in PCE. Although the two dyes produce similar spectral features, ground‐ and excited‐state density functional theory (DFT) simulations reveal that the dye with the bulkier donor group adsorbs more strongly to TiO₂, experiences limited π–π aggregation, and is more resistant to loss of excitation energy via charge recombination on the dye. The effects of conformational flexibility on absorption spectra and on the electronic coupling between the bright exciton and charge‐transfer states are revealed to be substantial and are characterized through density‐functional tight‐binding (DFTB) molecular dynamics sampling. These simulations offer a mechanistic explanation for the superior open‐circuit voltage and short‐circuit current of the bulky‐donor dye sensitizer and provide theoretical justification of an important design feature for the pursuit of greater photocurrent efficiency in DSCs. © 2017 Wiley Periodicals, Inc.     

Electron-rich heteroaromatic conjugated polypyridine ruthenium sensitizers for dye-sensitized solar cells

Ru(II) heteroleptic complexes as photosensitizers for dye-sensitized solar cells (DSCs) are presented. The article outlines design strategies, synthetic routes, optical and photovoltaic properties of ruthenium dyes based on polypyridines as ancillary ligands containing π-conjugated electron-rich heteroaromatic groups. The integration of donor heteroaromatic substituents, typically thiophene-based moieties, strongly improves the optical properties of the sensitizers in terms of bathochromic and hyperchromic shift compared to prototypical dyes N3 and N719. These favorable properties in turn yield DSCs with superior light harvesting abilities, higher external quantum efficiencies, improved device photocurrents, and top-ranked power conversion efficiencies. In combination with excellent stabilities under thermal stress and light soaking, this class of DSC photosensitizer has great potential for practical applications.     

Cyclopenta[c]selenophene based cooligomers and their polymers: comparative study with thiophene analogues

Selenophene and thiophene capped cyclopenta[c]selenophenes were synthesized and characterized. Crystal structure determination of some representative compounds revealed that the substitution at 3,4-position in the form of cyclopentane ring of selenophene or thiophene does not make any significant twist in the trimer backbone, making the cooligomer nearly planar. All the cooligomers were electrochemically polymerized and compared with thiophene capped cyclopenta[c]thiophene polymer. DFT calculations predict that the cyclopentane substitution on the third repeating unit (and in general) of one dimensional polymer neither disturb the planarity nor causes any significant twist on the polymeric backbone unlike the 3,4-dialkyl substitution. The electrochemically prepared selenophene based polymers showed low band gap compared to that of thiophene analogues. Cyclopentane substitution on selenophene as well as thiophene makes the resulting polymer oxidatively more stable when compared to more familiar poly-ethylenedioxythiophene (PEDOT) or poly-ethylenedioxyselenophene (PEDOS) systems. Alternate polymers of cyclopenta[c]selenophenes (CPS)/cyclopenta[c]thiophene (CPT) and thiophene/selenophene possess the energy of HOMO and LUMO significantly lower than that of homopolymers of CPS and CPT, however, possess higher band gap than PCPS.     

Design of organic dyes and cobalt polypyridine redox mediators for high-efficiency dye-sensitized solar cells

Dye-sensitized solar cells (DSCs) with cobalt-based mediators with efficiencies surpassing the record for DSCs with iodide-free electrolytes were developed by selecting a suitable combination of a cobalt polypyridine complex and an organic sensitizer. The effect of the steric properties of two triphenylamine-based organic sensitizers and a series of cobalt polypyridine redox mediators on the overall device performance in DSCs as well as on transport and recombination processes in these devices was compared. The recombination and mass-transport limitations that, previously, have been found to limit the performance of these mediators were avoided by matching the properties of the dye and the cobalt redox mediator. Organic dyes with higher extinction coefficients than the standard ruthenium sensitizers were employed in DSCs in combination with outer-sphere redox mediators, enabling thinner TiO(2) films to be used. Recombination was reduced further by introducing insulating butoxyl chains on the dye rather than on the cobalt redox mediator, enabling redox couples with higher diffusion coefficients and more suitable redox potential to be used, simultaneously improving the photocurrent and photovoltage of the device. Optimization of DSCs sensitized with a triphenylamine-based organic dye in combination with tris(2,2'-bipyridyl)cobalt(II/III) yielded solar cells with overall conversion efficiencies of 6.7% and open-circuit potentials of more than 0.9 V under 1000 W m(-2) AM1.5 G illumination. Excellent performance was also found under low light intensity indoor conditions.     

Redox couple related influences of bulky electron donor as well as spacer in organic dye-sensitized mesoscopic solar cells

For dye-sensitized solar cells (DSCs), it is of great significance to understand the structure–performance relationship of photosensitizers. Herein, we scrutinize the influences of the arylamine electron donors as well as the fused thiophene spacer on the optoelectronic features of thin-film DSCs employing the tris(1,10-phenanthroline)cobalt(II/III) or the iodide/triiodide redox couple. Interestingly, the incorporation of bulky dihexyloxybenzene-substituted triphenylamine (DHOB-TPA) electron donor does not resulted in an improved electron lifetime, which is sharp contrast with the conventional concept on bulky electron donor. On the other hand, the introduction of the DHOB-TPA electron donor or the dithienopyrrole spacer significantly increases the molar absorption coefficients of dyes, which govern the performance of thin-film DSCs. This work demonstrates how organic dyes must be tailored carefully depending on the electrolyte red/ox couple used.     

Fabrication of double-walled carbon nanotube counter electrodes for dye-sensitized solar sells

Double-walled carbon nanotubes (DWCNTs) have been studied for counter-electrode application in dye-sensitized solar cells (DSCs). Mesoporous TiO2 films are prepared from the commercial TiO2 nanopowders by screen-printing technique on optically transparent-conducting glasses. A metal-free organic dye (indoline dye D102) is used as a sensitizer. DWCNTs are applied to substitute for platinum as counter-electrode materials. Morphological and electrochemical properties of the formed counter electrodes are investigated by scanning electronic microscopy and electrochemical impedance spectroscopy, respectively. The electronic and ionic processes in platinum and DWCNT-based DSCs are analyzed and discussed. The catalytic activity and DSC performance of DWCNTs and Pt are compared. A conversion efficiency of 6.07% has been obtained for DWCNT counter-electrode DSCs. This efficiency is comparable to that of platinum counter-electrode-based devices.     

Organic redox couples and organic counter electrode for efficient organic dye-sensitized solar cells

A series of organic thiolate/disulfide redox couples have been synthesized and have been studied systematically in dye-sensitized solar cells (DSCs) on the basis of an organic dye (TH305). Photophysical, photoelectrochemical, and photovoltaic measurements were performed in order to get insights into the effects of different redox couples on the performance of DSCs. The polymeric, organic poly(3,4-ethylenedioxythiophene) (PEDOT) material has also been introduced as counter electrode in this kind of noniodine-containing DSCs showing a promising conversion efficiency of 6.0% under AM 1.5G, 100 mW·cm(-2) light illumination. Detailed studies using electrochemical impedance spectroscopy and linear-sweep voltammetry reveal that the reduction of disulfide species is more efficient on the PEDOT counter electrode surface than on the commonly used platinized conducting glass electrode. Both pure and solvated ionic-liquid electrolytes based on a thiolate anion have been studied in the DSCs. The pure and solvated ionic-liquid-based electrolytes containing an organic redox couple render efficiencies of 3.4% and 1.2% under 10 mW·cm(-2) light illumination, respectively.     

The effects of polymer gel electrolyte composition on performance of quasi-solid-state dye-sensitized solar cells

Polymer gel electrolytes based on poly(acrylic acid)-poly(ethylene glycol) (PAA–PEG) hybrid have been prepared and applied to developed quasi-solid-state dye-sensitized solar cells (DSCs). PAA–PEG hybrid was synthesized by polymerization reaction. Quasi-solid-state DSCs were fabricated with synthesized PAA–PEG electrolyte. The effects of alkali iodides LiI, KI, and I₂ concentrations on liquid electrolyte absorbency and ionic conductivity of PAA–PEG were investigated. The evolution of the solar cell parameters with polymer gel electrolyte compositions was revealed. DSCs based on PAA–PEG with optimized KI/I₂ concentrations showed better performances than those with optimized LiI/I₂ concentrations. The electrochemical impedance spectroscopy technique was employed to examine the electron lifetime in the TiO₂ electrode and quantify charge transfer resistances at the TiO₂/dye/electrolyte interface and the counter electrode in the solar cells based on the PAA–PEG hybrid gels. A maximum conversion efficiency of 4.96% was obtained for DSCs using KI based quasi-solid electrolyte under 100 mW cm⁻². Our work suggests that KI can be the promising alkali metal iodide for improving the performance of PAA–PEG hybrid gel DSCs.     

电化学阻抗谱研究染料/Al2O3交替组装结构的光伏特性及作用机理

使用Al₂O₃和N3染料制备了一种交替组装的结构, 该结构能够提高染料敏化太阳能电池(DSCs)的开路电压(V_oc), 短路电流(J_sc)和转换效率(η). 为了研究(染料/Al₂O₃)交替组装结构的作用机理, 使用电化学阻抗谱技术分析了电池的界面电阻. 分析结果表明, 随着交替组装结构中(染料/Al₂O₃)单元的增加, 光阳极/染料/电解质界面的电阻降低, 电池性能随之提高. 基于电化学阻抗谱分析结果, 建立了一系列的等效电路模型, 从理论上解释了(染料/Al₂O₃)交替组装结构的作用机理.     

Tuning the Electrical and Optical Properties of Diketopyrrolopyrrole Complexes for Panchromatic Dye‐Sensitized Solar Cells

A series of metal‐free organic dyes that were bridged by a diketopyrrolopyrrole moiety and were composed of indoline and triphenylamine as donor groups and furan and benzene as conjugated spacer groups were designed and synthesized for use in dye‐sensitized solar cells (DSCs). The photophysical properties, electrochemical properties, and performance of the DSCs were related to the structure of their corresponding dyes. Their absorption spectra broadened upon the introduction of the indoline and heterocyclic furan moieties through fine‐tuning of their molecular configuration. The overall conversion efficiencies of DSCs that were based on these dyes ranged from 5.14–6.53 %. Among the four dyes that were tested, indoline‐based ID01 and ID02 showed higher efficiencies (6.35 % and 6.53 %) as a result of their improved light‐harvesting efficiency and larger electron driving force. The ID01 dye, which contained an indoline moiety as an electron donor and a furan group as a π‐conjugated linker, showed an excellent monochromatic incident‐photon‐to‐current‐conversion efficiency (IPCE) spectrum (350–650 nm) with a maximum value of 78 % in the high plateau region and an onset value close to 800 nm. Intensity‐modulated photovoltage spectroscopy (IMVS) and impedance spectroscopy (IS) revealed that dyes that contained benzene conjugation spacers suppressed the charge‐recombination rate more efficiently than dyes that contained furan spacers, thereby resulting in improved photovoltage.     

Asymmetric ZnO Panel‐Like Hierarchical Architectures with Highly Interconnected Pathways for Free‐Electron Transport and Photovoltaic Improvements

Through a rapid and template‐free precipitation approach, we synthesized an asymmetric panel‐like ZnO hierarchical architecture (PHA) for photoanodes of dye‐sensitized solar cells (DSCs). The two sides of the PHA are constructed differently using densely interconnected, mono‐crystalline and ultrathin ZnO nanosheets. By mixing these PHAs with ZnO nanoparticles (NPs), we developed an effective and feasible strategy to improve the electrical transport and photovoltaic performance of the composite photoanodes of DSCs. The highly crystallized and interconnected ZnO nanosheets largely minimized the total grain boundaries within the composite photoanodes and thus served as direct pathways for the transport and effective collection of free electrons. Through low‐temperature (200 °C) annealing, these novel composite photoanodes achieved high conversion efficiencies of up to 5.59 % for ZnO‐based quasi‐solid DSCs.     

Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

A DFT/TDDFT study of porphyrazines and phthalocyanine oxo‐titanium derivatives as potential dyes in solar cells

Density functional theory and time dependent density functional theory calculations at the level of LDA/BP86/TZ2P were performed systematically on several Ti(IV) complexes of porphyrazines and one phthalocyanine. We performed an analysis of the frontier molecular orbitals of the ground state electronic structures and also discuss in particular the good concordance of our results with the experimental data, which affords to predict the geometrical and optical properties of new complexes ( 3 , 4 , and 7 ). We also emphasize the characterization of the UV–vis absorption spectra and propose transitions that contribute to the Q and B bands. Some useful calculated properties in complexes 2 , 3 , and 7 , like: high light absorption in the visible region of the spectra, transitions involved in these bands with a determined direction, charge separation, bigger highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO‐LUMO) gaps than complexes 4 and 5 , and the energy of their LUMO orbitals (that are higher than the lowest energy level of the conduction band of the TiO₂) indicate that system complexes 2 , 3 , and 7 could act as light‐harvesting sensitizers for dye‐sensitized solar cells (DSCs). These proposals were made using a model of the previously experimentally known phthalocyanine, which was used as sensitizer in DSCs devices, comparing its electronic properties with the herein proposed sensitizers. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Spectral Properties of Fluorogenic Thiophene‐derived Triarylmethane Dyes

Spectral properties and fluorogenic behaviors of five novel thiophene variants of malachite green (MG), termed MGTs, were determined. Appreciable changes as a function of homologation and substitution pattern, including absorption band positions and intensities and fluorescence quantum yields were observed. In particular, the shorter wavelength y‐band absorption was found to shift over a nearly 200 nm range based on aryl group variation, allowing fine‐tuning of the excitation wavelength for these dyes. In addition, the fluorescence intensity of some MGTs increased significantly (up to 4600‐fold) when the dye was bound to a cognate protein partner, which is potentially useful for cell imaging studies.     

Recent progress in interface modification for dye-sensitized solar cells

Interface modification on the TiO₂/dye/electrolyte interface of dye-sensitized solar cells (DSCs) is one of the most effective approaches to suppress the charge recombination, improve electron injection and transportation, and thus ameliorate the conversion efficiency and stability of DSCs. Conventional research focusing on the photoanodes interface modification before sensitization in dye-sensitized solar cells has been carried out and reviewed. However, recent studies showed that post-modification after sensitization of the TiO₂ electrode also plays a significant role on the TiO₂/dye/electrolyte interface. This post-modification using the immersing method could deprotonate dye molecules, prohibit the dye aggregation and retard the recombination reaction. As a result, it has great influence on the devices’ photovoltaic performance. This interface modification could also provide an approach to broaden the response of the solar spectrum by introducing an alternative assembling structure. An in-situ meaning of using a co-adsorbent is employed to modify the interface in the DSCs, which could retard the aggregation of the dye molecules and enhance the conversion efficiency. In addition, electrolyte additives can be used to modify the TiO₂/dye/electrolyte interface through some unique mechanisms. Based on the background of interface modification of photoanodes before sensitization, this review introduces various interface modifications after sensitization of dye-sensitized solar cells and their mechanisms.     

Controlling Interfacial Recombination in Aqueous Dye‐Sensitized Solar Cells by Octadecyltrichlorosilane Surface Treatment

A general and convenient strategy is proposed for enhancing photovoltaic performance of aqueous dye‐sensitized solar cells (DSCs) through the surface modification of titania using an organic alkyl silane. Introduction of octadecyltrichlorosilane on the surface of dyed titania photoanode as an organic barrier layer leads to the efficient suppression of electron recombination with oxidized cobalt species by restricting access of the cobalt redox couple to the titania surface. The champion ODTS‐treated aqueous DSCs (0.25 mM ODTS in hexane for 5 min) exhibit a V_oc of 821±4 mV and J_sc of 10.17±0.21 mA cm^?2, yielding a record PCE of 5.64±0.10 %. This surface treatment thus serves as a promising post‐dye strategy for improving the photovoltaic performance of other aqueous DSCs.