Shell-cross-linked cylindrical Polyisoprene-b-polyferrocenylsilane (PI-b-PFS) block copolymer micelles: one-dimensional (1D) organometallic nanocylinders

We report the creation and properties of colloidally stable shell-cross-linked cylindrical organometallic block copolymer micelles with adjustable length and swellability. The one-dimensional (1D) structures with semicrystalline polyferrocenylsilane (PFS) cores and polyisoprene (PI) coronas were initially self-assembled from PI-b-PFS block copolymers in a PI-selective solvent such as hexane. The length of the cylinders could be varied from hundreds of nanometers to several tens of micrometers by adjusting solution conditions, using various solvents such as hexane, decane, or hexane/THF (or toluene) mixtures. The cylindrical micelles with vinyl groups in the PI corona were cross-linked through a Pt(0)-catalyzed hydrosilylation reaction using 1,1,3,3-tetramethyl disiloxane as a cross-linker at room temperature. The shell cross-linking significantly increased the stability of the micelles relative to the un-cross-linked precursors as no fragmentation was observed upon sonication in solution. In addition, the structural integrity of the micelles was also enhanced after solvent removal; a solid sample was successfully microtomed and then examined using TEM, which revealed circular cross-sections for the PI-b-PFS micelles with an average diameter of ca. 15 nm. We also discovered that shell cross-linking is a prerequisite for generating ceramic replicas through the pyrolysis of PI-b-PFS aggregates. Moreover, we were able to pattern the cross-linked micelles on a flat substrate by microfluidic techniques, generating perpendicularly crossed lines of aligned micelles. In short, the shell-cross-linked PI-b-PFS 1D organometallic aggregates are a promising new type of nanomaterial with intriguing potential applications.     

Fragmentation of fiberlike structures: sonication studies of cylindrical block copolymer micelles and behavioral comparisons to biological fibrils

In alkane solvents, poly(isoprene-b-ferrocenyldimethylsilane) (PI-b-PFS) block copolymer forms fiberlike micelles, which show intriguing similarities with biological fibers such as amyloid fibers. Both systems exhibit fiber growth by a nucleated self-assembly mechanism and rapidly fragment upon exposure to the shear forces of ultrasonic irradiation. Sonication of PI-b-PFS cylindrical micelles was studied quantitatively by static light scattering and by electron microscopy. Both techniques are in excellent agreement and show that the weight-average length of sonicated micelles decreases as a function of sonication time. Simulation of the cleavage of micelles using different scission models shows that micelle fragmentation follows a Gaussian model and that the scission is highly dependent on micelle length, in contrast to DNA and polymer chain scission. We speculate that biological fibers, which are similar in length and rigidity to PFS block copolymer micelles, fragment by a similar mechanism when subjected to sonication.     

Redox-mediated synthesis and encapsulation of inorganic nanoparticles in shell-cross-linked cylindrical polyferrocenylsilane block copolymer micelles

Detailed studies of a new approach to the synthesis and encapsulation of silver and silver halide nanoparticles inside shell-cross-linked cylindrical block copolymer polyisoprene-block-polyferrocenyldimethylsilane (PI-b-PFS) micelles (1) through in situ redox reactions are reported. The cylindrical nanostructures 1 were prepared by the solution self-assembly of the PI-b-PFS diblock copolymer in the PI-selective solvent hexane followed by Pt(0)-catalyzed PI shell-cross-linking hydrosilylation reactions. The partial preoxidation of the swollen PFS core using tris(4-bromophenyl)aminium hexachloroantimonate [p-BrC6H4)3N][SbCl6] (2, Magic Blue) followed by redox reaction between the remaining Fe(II) centers in the PFS core and Ag(+) cations led to the formation of silver nanoparticles. High-resolution scanning transmission electron microscopy images of the resulting peapod structures provided a clear indication that the nanoparticles were encapsulated inside the micelles. The composition of the nanoparticles was analyzed by energy-dispersive X-ray spectroscopy (EDX). By combining the evolution of the UV-vis spectra of the reaction mixture and EDX measurements, we surprisingly found that silver halide seed particles were formed through a precipitation reaction at an early stage of the encapsulation process. The size of the silver nanoparticles varied with different amounts of silver ions added to the micelle solution. When I2 was used as the preoxidant, AgI nanoparticles were formed and encapsulated inside the cylinders through the precipitation reaction between iodide anions and silver ions. The packing density of the resulting AgI nanoparticles was increased by an iterative addition method, which utilizes the reversible redox properties of PFS. The small encapsulated AgI nanoparticles were also shown to serve as seeds for the formation of larger Ag nanoparticles when a silver salt was subsequently added.     

Formation of dispersed nanostructures from poly(ferrocenyldimethylsilane-b-dimethylsiloxane) nanotubes upon exposure to supercritical carbon dioxide

While incompatible block copolymers commonly assemble into several established classical or complex morphologies, highly asymmetric poly(ferrocenyldimethylsilane-b-dimethylsiloxane) (PFS-b-PDMS) diblock copolymers can also self-organize into high-aspect-ratio nanotubes with PDMS corona in the presence of PDMS-selective organic solvents. Exposure of these nanotubes on a carbon substrate to supercritical carbon dioxide (scCO2), also a PDMS-selective solvent, appears to promote partial dissolution of the copolymer molecules. At sufficiently high copolymer concentrations, the dissolved molecules subsequently re-organize within the scCO2 environment to form new copolymer nanostructures that redeposit on the substrate upon scCO2 depressurization. Transmission electron microscopy reveals that micelles form under all the conditions examined here, whereas nanotubes coalesce and vesicles develop only at relatively high temperatures. The extent to which the copolymer nanotubes dissolve and the size distribution of the replacement micelles are sensitive to exposure conditions. These results suggest that the phase behavior of PFS-b-PDMS diblock copolymers in scCO2 may be remarkably rich and easily tunable.     

End-to-end coupling and network formation behavior of cylindrical block copolymer micelles with a crystalline polyferrocenylsilane core

Cylindrical block copolymer micelles with a crystalline poly(ferrocenyldimethylsilane) (PFDMS) core and a long corona-forming block are known to elongate through an epitaxial growth mechanism on addition of further PFDMS block copolymer unimers. We now report that addition of the semicrystalline homopolymer PFDMS(28) to monodisperse short (ca. 200 nm), cylindrical seed micelles of PFDMS block copolymers results in the formation of aggregated structures by end-to-end coupling to form micelle networks. The resulting aggregates were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). In some cases, a core-thickening effect was also observed where the added homopolymer appeared to deposit and crystallize at the core-corona interface, which resulted in an increase of the width of the micelles within the networks. No evidence for aggregation was detected when the amorphous homopolymer poly(ferrocenylethylmethylsilane) (PFEMS(25)) was added to the cylindrical seed micelles whereas similar behavior to PFDMS(28) was noted for semicrystalline polyferrocenyldimethylgermane (PFDMG(30)). This suggested that the crystallinity of the added homopolymer is critical for subsequent end-to-end coupling and network formation to occur. We also explored the tendency of the cylindrical seed micelles to form aggregates by the addition of PI-b-PFDMS (PI = polyisoprene) block copolymers (block ratios 6:1, 3.8:1, 2:1, or 1:1), and striking differences were noted. The results ranged from typical micelle elongation, as reported in previous work, at high corona to core-forming block ratios (PI-b-PFDMS; 6:1) to predominantly end-to-end coupling at lower ratios (PI-b-PFDMS; 2:1, 1:1) to form long, essentially linear structures. The latter process, especially for the 2:1 block copolymer, led to much more controlled aggregate formation compared with that observed on addition of homopolymers.     

Control of the morphology of linear and cyclic PS-b-PI block copolymer micelles via PS addition

We have studied the effect of polystyrene (PS) homopolymer addition on the morphology of self-assembled block copolymer micelles made from linear or cyclic poly(styrene-b-isoprene), PS-b-PI, in a selective solvent for the PI block (heptane). Both copolymers have the same composition: the degree of polymerization is 290 for the PS block, and 110 for the PI block, and we focused on the influence of the addition of small amounts of PS homopolymer on the micellar morphology. For the copolymer concentrations considered, the linear copolymer self-organizes into spherical micelles while the cyclic copolymer forms cylindrical micelles. PS and PI chains constitute the core and the corona of these micelles, respectively, due to the different affinity of the blocks for heptane. Consequently, the PS homopolymer added is "solubilized" into the micellar core. Dynamic light scattering (DLS) data combined with atomic force microscopy (AFM) results show that the addition of PS homopolymer induces a drastic change in the micellar organization. Indeed, a morphological transition, from spheres to cylinders for the linear copolymer, and from cylinders to vesicles for the cyclic copolymer, is observed. These results highlight the fact that a small incorporation of PS homopolymer is clearly sufficient to modify the morphology (size and shape) of the micelles. This approach could be a key parameter for the design/control of micelles for specific applications in nanotechnology.     

Synthesis and characterization of shell cross-linked micelles with hydroxy-functional coronas: a pragmatic alternative to dendrimers?

Shell cross-linked (SCL) micelles with hydroxy-functional coronas have been constructed in aqueous solution by exploiting the micellar self-assembly behavior of a new thermoresponsive ABC triblock copolymer. This copolymer was prepared via atom transfer radical polymerization in a convenient one-pot synthesis and comprised a thermoresponsive core-forming poly(propylene oxide) (PPO) block, a cross-linkable central poly(2-(dimethylamino)ethyl methacrylate) (DMA) block, and a hydroxy-functional outer block based on poly(glycerol monomethacrylate) (GMA). DMF GPC analysis confirmed a unimodal molecular weight distribution for the PPO-PDMA-PGMA triblock copolymer precursor, with an M(n) of 12 100 and a polydispersity of approximately 1.26. This copolymer dissolved molecularly in aqueous solution at 5 degrees C but formed micelles with hydroxy-functional coronas above a critical micelle temperature of around 12 degrees C, which corresponded closely to the cloud point of the PPO macroinitiator. Cross-linking of the DMA residues using 1,2-bis(2-iodoethoxy)ethane produced SCL micelles that remained intact at 5 degrees C, i.e., below the cloud point of the core-forming PPO block. Dynamic light scattering studies confirmed that the SCL micelle diameter could be varied depending on the temperature employed for cross-linking: smaller, more compact SCL micelles were formed at higher temperatures, as expected. Since cross-linking involved quaternization of the DMA residues, the SCL micelles acquired cationic surface charge as judged by aqueous electrophoresis studies. These cationic SCL micelles were adsorbed onto near-monodisperse anionic silica sols, which were used as a model colloidal substrate. Thermogravimetric analyses indicated a SCL micelle mass loading of 2.5-4.4%, depending on the silica sol diameter and the initial micelle concentration. Aqueous electrophoresis measurements confirmed that surface charge reversal occurred after adsorption of the SCL micelles, and scanning electron microscopy studies revealed a uniform coating of SCL micelles on the silica particles.     

Micellar aggregation in blends of linear and cyclic poly(styrene-b-isoprene) diblock copolymers

The morphology of micelles formed from blends of linear and cyclic poly(styrene-b-isoprene) (PS-b-PI) block copolymers has been investigated in solution using dynamic light scattering (DLS) and in thin solid deposits by atomic force microscopy (AFM) and transmission electron microscopy under cryogenic conditions (cryo-TEM). Micelles of the pure cyclic PS(290)-b-PI(110) copolymers are wormlike cylindrical objects built by unidirectional aggregation of 33 nm wide sunflower micelles, while the linear block copolymer having the same volume fraction and molar mass forms spherical micelles 40 nm in diameter. The DLS, AFM, and cryo-TEM results consistently show that the addition of the linear copolymer (even for amounts as low as 5% w/w) to the cyclic copolymer rather favors the formation of spherical micelles at the expense of the cylindrical aggregates. Those results clearly show that the linear block copolymer chains can be used to stabilize the thermodynamically unstable elementary sunflower micelle. The thermal stability of the micelles (from the pure copolymers and from the blends) has been examined in solid deposits with in situ AFM measurements. Coalescence starts at about 70 degrees C, and the surface roughness shows a two-step decrease toward a fully homogeneous and flat structure.     

Morphological manipulation of ionic block copolymer micelles using an electric field

We present an electric-field-triggered sphere-to-cylinder transition of negatively charged block copolymer micelles with a radically low electric field of 30 V/cm. The system investigated is dilute solutions of strong polyelectrolyte containing ionic-b-neutral block copolymers (i.e., poly(styrenesulfonate-b-methylbutylene)). We have carried out in situ small-angle X-ray scattering experiments equipped with a dc power supply, combined with electron microscopy and atomic force microscopy. The application of small electrical fields across the solutions of spherical micelles results in the transient morphology of interconnected spheres, which are eventually transformed into a cylindrical shape with time. The E-field-induced cylindrical micelles revert to spherical micelles when the E field is switched off.     

Spontaneous generation of amphiphilic block copolymer micelles with multiple morphologies through interfacial Instabilities

We introduce a method for the formation of block copolymer micelles through interfacial instabilities of emulsion droplets. Amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) copolymers are first dissolved in chloroform; this solution is then emulsified in water and chloroform is extracted by evaporation. As the droplets shrink, the organic solvent/water interface becomes unstable, spontaneously generating a new interface and leading to dispersion of the copolymer as micellar aggregates in the aqueous phase. Depending on the composition of the copolymer, spherical or cylindrical micelles are formed, and the method is shown to be general to polymers with several different hydrophobic blocks: poly(1,4-butadiene), poly(-caprolactone), and poly(methyl methacrylate). Using this method, hydrophobic species dissolved or suspended in the organic phase along with the amphiphilic copolymer can be incorporated into the resulting micelles. For example, addition of PS homopolymer, or a PS-PEO copolymer of different composition and molecular weight, allows the diameter and morphology of wormlike micelles to be tuned, while addition of hydrophobically coated iron oxide nanoparticles enables the preparation of magnetically loaded spherical and wormlike micelles.     

Cylindrical micelles from the aqueous self-assembly of an amphiphilic poly(ethylene oxide)-b-poly(ferrocenylsilane) (PEO-b-PFS) block copolymer with a metallo-supramolecular linker at the block junction

A supramolecular AB diblock copolymer has been prepared by the sequential self-assembly of terpyridine end-functionalized polymer blocks by using Ru(III)/Ru(II) chemistry. By this synthetic strategy a hydrophobic poly(ferrocenylsilane) (PFS) was attached to a hydrophilic poly(ethylene oxide) (PEO) block to give an amphiphilic metallo-supramolecular diblock copolymer (PEO/PFS block ratio 6:1). This compound was used to form micelles in water that were characterized by a combination of dynamic and static light scattering, transmission electron microscopy, and atomic force microscopy. These complementary techniques showed that the copolymers investigated form rod-like micelles in water; the micelles have a constant diameter but are rather polydisperse in length, and light scattering measurements indicate that they are flexible. Crystallization of the PFS in these micelles was observed by differential scanning calorimetry, and is thought to be the key behind the formation of rod-like structures. The cylindrical micelles can be cleaved into smaller rods whenever the temperature of the solution is increased or they are exposed to ultrasound.     

Amphiphilic Janus micelles with polystyrene and poly(methacrylic acid) hemispheres

We describe the synthesis and the solution properties of Janus micelles containing a polybutadiene (PB) core and a compartmentalized corona consisting of a poly(methacrylic acid) (PMAA) and a polystyrene (PS) hemisphere. The Janus micelles were obtained via cross-linking the middle block of a microphase-separated PS-block-PB-block-PMMA triblock copolymer in the bulk state, followed by alkaline hydrolysis of the poly(methyl methacrylate) (PMMA) ester groups. Results of fluorescence correlation spectroscopy, field flow fractionation, light scattering, cryogenic transmission electron microscopy, scanning electron microscopy, and scanning force microscopy indicate that above a critical aggregation concentration of about 0.03 g/L spherical supermicelles are formed from about 30 PS-PMAA micelles in aqueous solution in the presence of NaCl. These supermicelles have radii of 40-60 nm, significantly increasing on ionization (pH >6). In addition, very large spherical objects are observed with radii of 100-250 nm.     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

In-situ polymerization at the interfaces of micelles: a "grafting from" method to prepare micelles with mixed coronal chains

Herein we describe a new strategy for producing micelles with mixed coronal chains. This method involves attachment of an atom transfer radical polymerization (ATRP) initiator at the interface of a micelle and preparation of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes at the interface by a "grafting from" method. Poly(ethylene glycol)- block-polystyrene (PEG- b-PS) diblock copolymer was achieved by ATRP. After the sulfonation reaction PS blocks were partly sulfonated. In aqueous solution at low pH the sulfonated block copolymer self-assembled into micelles with PS cores and PEG coronae and sodium 4-styrenesulfonate groups were distributed at the interfaces of the micelles. An ATRP initiator consisting of a quaternary ammonium salt moiety and a 2-bromo-2-methyl propionate moiety was ion exchanged onto the interface of the micelle. ATRP of DMAEMA was initiated at the interface, and micelles with PEG/PDMAEMA mixed coronal chains were prepared by ATRP. The structures of the micelles were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and zeta potential measurements. The size and morphology of the micelles were controlled by pH in aqueous solution. At high pH, PDMAEMA brushes collapse, forming nanodomains on the surface of the micelles. PDMAEMA brushes in the coronae of the micelles could be used as a template for preparation of gold nanoparticles.     

Self-assembly of a diblock copolymer with pendant disulfide bonds and chromophore groups: a new platform for fast release

An amphiphilic block copolymer comprising poly(ethylene glycol) (PEG) and poly(2-(methacryloyl)oxyethyl-2'-hydroxyethyl disulfide) (PMAOHD) blocks was synthesized by atom transfer radical polymerization (ATRP). Pyrenebutyric acid was conjugated to the block copolymer by esterification, and a block copolymer with pendant disulfide bonds and pyrenyl groups (PEG-b-P(MAOHD-g-Py)) was obtained. (1)H NMR and gel permeation chromatography (GPC) results demonstrated the successful synthesis of the block copolymer. The cleavage of the disulfide bonds and the degrafting of the pyrenyl groups were investigated in THF and a THF/methanol mixture. Fluorescence spectroscopy, GPC, and (1)H NMR results demonstrated fast cleavage of the disulfide bonds by Bu(3)P in THF. Fluorescence results showed the ratio of the intensity of the excimer peak to the monomer peak decreased rapidly within 20 min. GPC traces of the block copolymer moved to a long retention time region after addition of Bu(3)P, indicating the cleavage of the disulfide bonds and the degrafting of the pyrenyl groups. PEG-b-P(MAOHD-g-Py) can self-assemble into micelles with poly(MAOHD-g-Py) cores and PEG coronae in a mixture of methanol and THF (9:1 by volume). The dissociation of the micelles in the presence of Bu(3)P was investigated. After cleavage of the disulfide bonds in the micellar cores, a pyrene-containing small molecular compound and a block copolymer with pendant thiol groups were produced. Transmission electron microscopy (TEM), dynamic light scattering (DLS), and (1)H NMR were employed to track the dissociation of the polymeric micelles. All the techniques demonstrated the dissociation of the micelles and the fast release of pyrenyl groups from the micelles.     

Cylindrical micelles of controlled length with a π-conjugated polythiophene core via crystallization-driven self-assembly

Solution self-assembly of the regioregular polythiophene-based block copolymer poly(3-hexylthiophene)-b-poly(dimethylsiloxane) yields cylindrical micelles with a crystalline P3HT core. Monodisperse nanocylinders of controlled length have been prepared via crystallization-driven self-assembly using seed micelles as initiators.     

Vertically aligned dense carbon nanotube growth with diameter control by block copolymer micelle catalyst templates

We have grown a dense array of vertically aligned carbon nanotubes (CNTs) with a controlled distribution of diameters by using block copolymer micelles to form and pattern catalyst particles. The block copolymer poly(styrene-block-acrylic acid) (PS16500-PAA4500) was dissolved in toluene to form micelles and then loaded with FeCl3. The metal-loaded micelles were spin-coated on Si and then thermally treated to remove the polymer. Using this process, we produced surfaces patterned with iron oxide catalyst particles with particle densities ranging from 1400 microm(-2) to 3800 microm(-2) and a size distribution of (6.9 +/- 0.8) nm. CNT growth by thermal chemical vapor deposition was then performed on these samples. The low-density catalyst sample produced unaligned, low-density CNTs, whereas the high-density catalyst sample produced vertically aligned, dense CNTs about 10 microm in length. Transmission electron microscopy revealed that the CNTs typically had double and triple graphitic layers with normally distributed diameters of (4.5 +/- 1.1) nm. For comparison, CNTs grown from the standard approach of blanket Fe films had a wide distribution of diameters between 6 and 21 nm. This catalyst preparation approach dramatically sharpens the size distribution of CNTs, compared to standard approaches, and provides a simple means of controlling the areal density of CNTs.     

Shape transformation of poly(butadiene)‐b‐poly(ethyleneoxide) plus DTAB compound micelles in aqueous solutions

The micellar shape of Poly(butadiene)‐b‐poly(ethyleneoxide) (PB‐PEO) plus Dodecyltrimethylammoniumbromide (DTAB) compound micelles was investigated by light scattering, small‐angle X‐ray scattering and small‐angle neutron scattering in dependence of the molar ratio between block copolymer and surfactant. The given block copolymer forms cylindrical micelles in binary aqueous solution, which transform to spherical aggregates upon the addition of a sufficiently high amount of DTAB. It is interesting to note that the micellar shape seems to be a bistable feature, in the sense that it depends not only on the molar ratio of BCP and DTAB but also in a predictable manner on the preparation procedure of the solution.     

Morphology transformation of hybrid micelles self-assembled from rod-coil block copolymer and nanoparticles

Hybrid polymeric micelles self-assembled from a mixture containing poly(γ-benzyl-L-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) block copolymer and gold nanoparticles (AuNPs) were prepared. The effect of AuNPs on the self-assembly behavior of PBLG-b-PEG was studied both experimentally by transmission electron microscopy, scanning electron microscopy, and laser light scattering and computationally using dissipative particle dynamics (DPD) simulations. It was found that, the pure PBLG-b-PEG block copolymer self-assembles into long cylindrical micelles. By introducing AuNPs to the stock block copolymer solution, the formed aggregate morphology transforms to spherical micelles. The DPD simulation results well reproduced the morphological transformations observed in the experiments. And the simulation revealed that the main reason for the aggregate morphology transformation is the breakage of ordered packing of PBLG rods in micelle core by the added nanoparticles. Moreover, from the DPD simulations, the distribution information on nanoparticles was obtained. The nanoparticles were found to prefer to locate near the core/shell interface as well as in the core center of the micelles. The combination of experimental and simulation methods lead to a comprehensive understanding of such a complex self-assembly system.     

Preparation of light-stable micelles with azo dyes from a nonamphiphilic random block copolymer

Light-stable micelles with azo dyes were prepared by micelle formation of a nonamphiphilic diblock copolymer containing azobenzene and UV absorbent at ca. 1 mol% as the unit ratios. The nonamphiphilic block copolymer consists of two different kinds of random copolymer blocks: poly[4-(phenylazophenoxymethyl)styrene-co-vinylphenol] (P(AS-co-VPh)) and poly[4-(2-hydroxybenzophenoxymethyl)styrene-co-styrene] (P(HBS-co-St)). This random block copolymer, P(AS-co-VPh)-b-P(HBS-co-St) formed the micelles in the presence of 1,4-butanediamine (BDA) through hydrogen bond cross-linking between the VPh units via BDA. The micelles had the azobenzene moieties at the cores and the UV absorbents at the coronas. The micelles showed a small color difference in color fading experiments, in comparison with the unimers and with micelles having no UV absorbent at the coronas. It is significant that the diblock copolymer forms the micelles and has the UV absorbents at the coronas to suppress the color fading. Furthermore, the chain length of ,-diamines had no effect on the hydrodynamic radius of the micelles, but affected the aggregation number and the cmc.