两种各向异性材料界面周期裂纹的反平面问题

研究两种各向异性材料界面含周期裂纹的反平面剪切问题，运用复变函数方法，获得了封闭形式解答，并给出了应力强度因子公式。从本文解签的特殊情形，可直接导出均匀各向异性材料共线裂纹，两种各向同性材料界面裂纹的相应问题公式。     

两种各向异性材料界面共线裂纹的反平面问题

本文研究两种各向异性材料界面共线裂纹的反平面剪切问题。利用复变函数方法，提出了一般问题公式和某些实际重要问题的封闭形式解。考察了裂纹尖端附近的应力分布并给出了应力强度因子公式。从本文解签的特殊情形，可以直接导出两种各向同性材料界面裂纹，均匀各向异性材料共线裂纹以及均匀各向同性材料共线裂纹的相应问题公式，其中包括已有的经典结果。     

计算弯曲中心的理论公式及其应用

 使用弹性力学的Saint-Venant弯曲理论定义了一般截面的弯 曲中心并给出了精确的计算公式(对薄壁和非薄壁截面均适用)，在开口薄壁截面的情形， 由材料力学给出的关于不同截面的弯曲中心公式都可由本文的理论公式经近似分析获得.     

修正算子γB00的物理含义及精度分析

多次透射公式是一种用于无限介质波动数值模拟中的局部人工边界条件,飘移失稳是多次透射公式在时步积分数值模拟实现中出现的一种失稳现象,可通过在多次透射公式算子中加上修正算子γB00的简便处理方法消除.本文依据球面波传播原理和介质阻尼效应解释了修正算子γB00的物理含义,并在两种极限情形(理想暂态情形和理想稳态情形)下对加修...     

用三轴转台测量激光导引发射、接收视场角数据处理问题的探讨

研究了最一般情形下用三轴转台测量激光导引发射、接收视场角数据的处理问题,由此得出一般情形下计算视场角的公式,并给出了较为详细的推导过程。现场调试结果表明:通过该公式进行数据处理后,所得测试结果更符合实际情形,测试精度得到较大提高。     

有限元收敛性与分片试验条件

本文就平面弹性问题给出了分片试验的条件，并给出了其明确的物理意义。条件用公式表达，并证明了就是工程式分片试验的充分必要条件，同时还证明了这些公式也是单元收敛的充分必要条件，本文的方法可以推广到有限元分析的其它问题去。     

圆板弯曲的三维弹性理论解

本文采用文献~[1]提供的三维弹性理论解,分析了厚圆板的轴对称弯曲问题。并就均布与集中载荷作用下外周边简支与固支的各种情形,作了数值计算,以供工程人员参考。     

Kovalevskaya弹性杆

应用Kirchhoff比拟讨论Kovalevskaya情况弹性细杆的平衡稳定性问题．导出Kirchhoff方程的解析积分．对于杆截面的主轴与Frenet坐标轴重合的无扭转杆的特殊情形作定性分析，讨论其平衡状态的稳定性与分岔．证明了判断受拉扭作用的圆截面直杆平衡稳定性的Greenhill公式也适用于Kovalevskaya情形的非圆截面杆．     

均质简支梁简化为单自由度系统条件研究

简支梁是土木工程中的常见结构形式，工程计算中常将其简化为单自由度系统进行初步分析和计算．本文系统地讨论了简谐荷载作用下将简支梁简化为单自由度系统进行竖向位移计算的限定条件．对限定条件分析发现将梁上质量的一半集中到梁跨中处所得近似结果精度最好．给出公式可以通过单自由度系统的位移得到梁上任意点处的竖向位移．本文对结构力学教材中的集中质量法进行了进一步的分析和讨论，给出的近似计算公式对土木工程中简支梁在简谐力作用下竖向位移的快速估算具有一定的参考价值．     

集中载荷下含偏心裂纹椭圆盘的应力强度因子计算

本文采用边界配置方法计算了受集中载荷作用时椭圆盘中偏心裂纹两端的应力强度因子,其中包括椭圆两半轴不同比值。不同裂纹长度和不同偏心程度的情况,在其特例椭圆盘中心裂纹情形,本文结果与Isida一致;在圆盘偏心裂纹情形,本文给出比Rooke等人更好的结果。     

Analytical solution for bending stress intensity factor in an orthotropic elastic plate containing a crack and subjected to concentrated moments

The problem of estimating the bending stress distribution in the neighborhood of a crack located on a single line in an orthotropic elastic plate of constant thickness subjected to out-of-plane concentrated moments is examined. Using classical plate theory and integral transform techniques, the general formulae for the bending moment and twisting moment in an elastic plate containing cracks located on a single line are derived. The solution is obtained in a closed form for the case in which there is a single crack in an infinite plate subjected to symmetric concentrated moments.     

Solution of bending of cantilever rectangular plates under uniform surface-load by the method of two-direction trigonometric series

The bending of a cantilever rectangular plate is a very complicated problem in thetheory of plates.For a long time,there have been only approximate solutions for thisproblem by energy methods and numerical methods.since 1979,Prof.F.V.Chang of Tsing Hua University obtained,by the method ofsuperposition,a series of analytic solutions for cantilever rectangular plates under uniformload and concentrated load.In this paper,the two-direction trigonometric series is used to obtain the solution forthe bending of cantilever rectangular plates under uniform load.The obtained results arecompared with the results by the method of superposition.The comparison shows that theresults of these two methods are in good agreement,hence they are mutually confirmed to becorrect.     

Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的辛叠加解

研究Winkler地基上正交各向异性矩形薄板弯曲方程所对应的Hamilton正则方程, 计算出其对边滑支条件下相应Hamilton算子的本征值和本征函数系, 证明该本征函数系的辛正交性以及在Cauchy主值意义下的完备性, 进而给出对边滑支边界条件下Hamilton正则方程的通解, 之后利用辛叠加方法求出Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的解析解. 最后通过两个具体算例验证了所得解析解的正确性.     

Bending of thick plates with a concentrated load

In this paper, according to the simplified theory of [1], the bending of rectangular plates with two opposite edges simply supported and other two opposite edges being arbitrary under the action of a concentrated load is treated by means of properties of two-variable-function and the method of series^[2]. The effect of transverse shearing forces on the bending of plates is considered. When the thickness h of plates is small, and the term, whose orders are more than order of h² are neglected, then the results agree with the solutions corresponding to the problem of thin plates^[3]. At the end, the solutions of the bending problem of plates with arbitrary linear distributed load are also obtained.     

A free rectangular plate on elastic foundation

In the theory of elastic thin plates, the bending of a rectangular plate on the elastic foundation is also a difficult problem. This paper provides a rigorous solution by the method of superposition. It satisfies the differential equation, the boundary conditions of the edges and the free corners. Thus we are led to a system of infinite simultaneous equations. The problem solved is for a plate with a concentrated load at its center. The reactive forces from the foundation should be made to be in equilibrium with the concentrated force to see whether our calculation is correct or not.     

Green’s functions for bending problem of a thin anisotropic plate with an elliptic hole

The Green’s functions have not been studied in open literatures for the bending problem of an anisotropic plate with an elliptic hole subjected to a normal concentrated force and a concentrated moment. In this paper, the problem is investigated and the Green’s functions are first obtained by using the complex potential approach. The techniques of conformal mapping transformation and analytic continuation are used to derive the closed-form complex stress functions. The Green’s functions obtained have some potential applications in the analysis of composite structures such as the modification of the displacement compatibility model for notched stiffened composite panels and the formulation of a new method for interlaminar stress analysis around holes of laminates.     

Large deflections of cantilever beams of non-linear elastic material under a combined loading

Large deflection of cantilever beams made of Ludwick type material subjected to a combined loading consisting of a uniformly distributed load and one vertical concentrated load at the free end was investigated. Governing equation was derived by using the shearing force formulation instead of the bending moment formulation because in the case of large deflected member, the shearing force formulation possesses some computational advantages over the bending moment formulation. Since the problem involves both geometrical and material non-linearities, the governing equation is complicated non-linear differential equation, which would in general require numerical solutions to determine the large deflection for a given loading. Numerical solution was obtained by using Butcher's fifth order Runge-Kutta method and are presented in a tabulated form.     

中心集中力作用下圆薄板的固有频率—载荷特征关系

本文讨论了中心集中静载作用下圆薄板在非线性弯曲静平衡构形附近的微幅自由振动,其静平衡问题采用问题的精确解在此基础上,用伽辽金法获得了其最低固有频率——载荷特征关系.所得结果可供这类谐振弹性元件设计中参考.     

Further research on the bending of the cantilever rectangular plates under a concentrated load

In this paper we apply the reciprocal theorem^[1] to further research on the bending problem of the cantilever rectangular plate under a concentrated load acting at any of its points. This method is even simpler and more general.     

Elasticity solutions for a piezoelectric cone under concentrated loads at its apex

IntroductionTheproblemofaconesubjectedtoconcentratedloadsatitsapexisaclassicalprobleminthetheoryofelasticity.AnumberofscholarshavestUdiedtheproblem.LovereportedthesolutionstotheproblemofanisotropicconeunderconcentfatCdforcesatitsapex['].Lur'estudiedthisclassofproblemssystematicallybymeansofPapkovich-Neubergeneralsolution[2].LekniskiiandHu,byusingtheirrespectivegeneralsolutions,studiedcompressionandbendingproblemsofatransverselyisotropicconesubjectedtoaxialconcentfatedforcesandtfansverseconc…