Swelling of poly(ethylene oxide) gel in aqueous solutions of sodium dodecyl sulfate with added sodium chloride

The swelling behavior of poly(ethylene oxide) (PEO) gels in aqueous solutions of sodium dodecyl sulfate (SDS) with and without NaCl was investigated. In the absence of NaCl, PEO gels with different degrees of cross-linking began to swell from a concentration lower than the critical micelle concentration (cmc) of SDS, then showed sigmoidal enhancements of swelling in a higher SDS concentration region until the degrees of swelling reached maximum values. The SDS concentration at which the swelling began to appear was in reasonable agreement with the critical aggregation concentration (cac) value reported for the aqueous PEO system. For the cases where NaCl was present, the swelling behavior of PEO gel was different from that when NaCl was absent in the following way. The concentrations where the swelling begins to appear, and hence those where the degree of swelling rises steeply, decreased with an increase in NaCl concentration. The ultimate degrees of swelling at higher concentration regions also decreased with an increase in the NaCl concentration. The lowering of the SDS concentrations at which the PEO gel began to swell is in line with the decreases in the cmc of SDS solutions containing NaCl and also with the decreases in the cac of PEO solution. Electronic Publication     

Positive cooperative mechanistic binding of proteins at low concentrations: a comparison of poly (sodium N-undecanoyl sulfate) and sodium dodecyl sulfate

The interactions of the negatively charged achiral molecular micelle, poly (sodium N-undecanoyl sulfate) (poly-SUS), with four different proteins using intrinsic and extrinsic fluorescence spectroscopic probes, are studied. A comparison of poly-SUS with the conventional surfactant, sodium dodecyl sulfate (SDS), and the monomeric species, SUS, is also reported. In this work, we observed that poly-SUS preferentially binds to acidic proteins, exhibiting positive cooperativity at concentrations less than 1 mM for all proteins studied. Moreover, it appears that the hydrophobic microdomain formed through polymerization of the terminal vinyl group of the monomer, SUS, is largely responsible for the superior binding capacity of poly-SUS. From these results, we conclude that the interactions of poly-SUS with the acidic proteins are predominantly hydrophobic and postulate that poly-SUS would produce superior interactions relative to SDS at low concentrations in polyacrylamide gel electrophoresis (PAGE). As predicted, use of poly-SUS allowed separation of the His-tagged tumor suppressor protein, p53, at sample buffer concentrations as low as 0.08% w/v (2.9 mM), which is 24 times lower than required for SDS in the standard reducing PAGE protocol. This work highlights the use of poly-SUS as an effective surfactant in 1D biochemical analysis.     

Physicochemistry of interaction between the cationic polymer poly(diallyldimethylammonium chloride) and the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate in water and isopropyl alcohol-water media

The physicochemistry of interaction of the cationic polymer poly(diallyldimethylammonium chloride) (PDADMAC) with the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate was studied in detail using tensiometry, turbidimetry, calorimetry, viscometry, dynamic light scattering (DLS), and scanning electron microscopy (SEM). Fair interaction initially formed induced small micelles of the surfactants and later on produced free normal micelles in solution. The interaction process yielded coacervates that initially grew by aggregation in the aqueous medium and disintegrated into smaller species at higher surfactant concentration. The phenomena observed were affected by the presence of isopropyl alcohol (IP) in the medium. The hydrodynamic sizes of the dispersed polymer and its surfactant-interacted species were determined by DLS measurements. The surface morphologies of the solvent-removed PDADMAC and its surfactant-interacted complexes from water and IP-water media were examined by the SEM technique. The morphologies witnessed different patterns depending on the composition and the solvent environment. The head groups of the dodecyl chain containing surfactants made differences in the interaction process.     

Interaction of slightly cross-linked gels of poly(diallyldimethylammonium bromide) with sodium dodecyl sulfate. Diffusion of surfactant ions in gel

The dynamics of the changing microenvironment of the fluorescent probe pyrene in slightly cross-linked networks of poly(diallyldimethylmmonium bromide) during diffusion of sodium dodecyl sulfate (SDS) in the gel phase has been investigated by fluorescence spectroscopy. Values of the spectral ratio I₃/I₁ for pyrene monomer included in SDS micelles in the swollen networks fall between the corresponding values for pyrene in water and for pyrene dissolved in SDS micelles in aqueous solution. In the narrow interval of the surfactant concentrations in the gel phase, the formation of pyrene excimers is observed. The values of the critical micelle concentration in the gel phase (ca. 5 × 10^?4 to 8 × 10^?4 mol/L) are tenfold lower than in aqueous solutions of the surfactant. The effective micellar diffusion coeffecient D in the gel phase increases with increasing swelling of the network. © 1993 John Wiley & Sons, Inc.     

Colloid stability of sodium dihexadecyl phosphate/poly(diallyldimethylammonium chloride) decorated latex

The colloid stability of supramolecular assemblies composed of the synthetic anionic lipid sodium dihexadecyl phosphate (DHP) on cationic poly(diallyldimethylammonium chloride) (PDDA) supported on polystyrene sulfate (PSS) microspheres was evaluated via turbidimetry kinetics, dynamic light scattering for particle sizing, zeta-potential analysis, and determination of DHP adsorption on PDDA-covered particles. At 0.05 g/L PDDA and 5 x 10(9) PSS particles/mL, PDDA did not induce significant particle flocculation and a vast majority of PDDA covered single particles were present in the dispersion so that this was the condition chosen for determining DHP concentration (C) effects on particle size and zeta-potentials. At 0.8 mM DHP, charge neutralization, maximal size, and visible precipitation indicated extensive flocculation and minimal colloid stability for the DHP/PDDA/PSS assembly. At 0.05 g L(-1) PDDA, isotherms of high affinity for DHP adsorption on PDDA-covered particles presented a plateau at a limiting adsorption of 135 x 10(19) DHP molecules adsorbed per square meter PSS which was well above bilayer deposition on a smooth particle surface. The polyelectrolyte layer on hydrophobic particles was swelled and fluffy yielding ca. 6 +/- 1.5 nm hydrodynamic thickness. Maximal and massive adsorption of DHP lipid onto this layer produced polydisperse DHP/PDDA/PSS colloidal particles with low colloid stability and which, at best, remained aggregated as doublets over a range of large lipid concentrations so that it was not possible to evaluate the mean total thickness for the deposited film. The assembly anionic lipid/cationic PDDA layer/polymeric particle was relatively stable as particle doublets only well above charge neutralization of the polyelectrolyte by the anionic lipid, at relatively large lipid concentrations (above 1 mM DHP) with charge neutralization leading to extensive particle aggregation.     

Isothermal titration calorimetric studies on the temperature dependence of binding interactions between poly(propylene glycol)s and sodium dodecyl sulfate

Isothermal titration calorimetry (ITC) is a sensitive research tool for examining the binding interactions between surfactant and polymer where the differential enthalpy during the binding process is monitored. In addition to the critical micelle concentration (cmc) and the micellization enthalpy (deltaHm), the effective micellar charge fraction (beta) of the ionic surfactant micellization process can also be determined from ITC thermograms. Poly(propylene glycol) (PPG) exhibits a lower critical solution temperature (LCST) ranging from 15 to 42 degrees C, depending on the molecular weights. We report, for the first time, the binding interactions between sodium dodecyl sulfate (SDS) and 1,000, 2,000 and 3,000 Da PPGs, where different binding mechanisms are in operation, depending on the temperature. At temperatures lower than the LCST, the binding interactions are similar to those of SDS and low molecular weight poly(ethylene glycol)s (MW < 3500 Da). At temperatures greater than the LCST, the binding interactions are dominated by direct solubilization of PPG chains into mixed micellar cores. At temperatures near the LCST, the binding interactions are controlled by the balance ofthe PPG solubilization at low SDS concentrations and polymer-induced micellization at high SDS concentrations.     

Molecular dynamics simulations of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of poly(diallyldimethylammonium chloride) (PDADMAC)

Well-aligned ZnO nanorods (NRs) were grown on indium-tin-oxide (ITO) slide by the hydrothermal method and used as templates for preparing ZnO/Au composite nanoarrays. The optical and morphological properties of ZnO/Au composites under various HAuCl(4) concentrations were explored via UV-vis absorption spectroscopy, photoluminescence (PL) and scanning electron microscopy (SEM). The density and size of gold nanoparticles (Au NPs) on ZnO NRs can be controlled by adjusting the concentration of HAuCl(4). The optimal ZnO/Au composites display complete photocatalytic degradation of methyl blue (MB) within 60 min, which is superior to that with pure ZnO NRs prepared by the same method. The reason of better photocatalytic performance is that Au NPs act as electron traps and it prevents the rapid recombination of electrons and holes, resulting in the improvement of photocatalytic efficiency. The photocatalytic performance of ZnO/Au composites is mainly controlled by the density of Au NPs formed on ZnO NRs. The application in rapid photodegradation of MB shows the potential of ZnO/Au composite as a convenient catalyst for the environmental purification of organic pollutants.     

Effect of cosolvents on the binding interaction between poly(ethylene oxide) and sodium dodecyl sulfate

The micellization of sodium dodecyl sulfate (SDS) in different glycol-water solvent mixtures was studied using the isothermal titration calorimetric (ITC) technique. At the same time, microcalorimetric titrations were also carried out to monitor the binding interaction of SDS and poly(ethylene oxide) (PEO) in the presence of different cosolvents. The demicellization of SDS in mixtures of water and cosolvents is different from that in water due to the reduction in solvent polarity and charge interaction of surfactants. The critical micelle concentration (cmc) first decreases with the addition of a small amount of cosolvents and then increases at higher cosolvent concentrations. The thermodynamics of surfactant micellization can be analyzed using the solubility parameters of solvent mixtures. For the binding interaction between SDS and PEO in different solvent mixtures, the dehydration process at low SDS concentrations is replaced by the chain solubilization process with decreasing solvent polarity. With further reduction in the solvent polarity, the binding interaction between SDS and PEO becomes weak and no aggregates can be formed beyond a certain glycol concentration. The binding interaction between SDS and PEO in different solvent mixtures was analyzed and ascribed to the effects of PEO solubility and hydrophobicity of SDS.     

Aggregation of sodium dodecyl sulfate in aqueous sodium chloride solutions

Summary Aqueous solutions of sodium dodecyl sulfate with added sodium chloride (0–0.3 mol kg^–1) were studied at 298.2 K in order to calculate the molar standard free energy of micelle formationG _m . The following properties were measured: (i) aggregation number by membrane osmometry, (ii) counter-ion binding and sodium ion activities by electromotive force, (iii) critical micelle concentration by electromotive force and fluorescence spectrophotometry. The results indicate thatG _m . is independent of the NaCl concentration.     

Molecular dynamics simulation of interactions between a sodium dodecyl sulfate micelle and a poly(ethylene oxide) polymer

We have performed atomistic molecular dynamics simulations of an anionic sodium dodecyl sulfate (SDS) micelle and a nonionic poly(ethylene oxide) (PEO) polymer in aqueous solution. The micelle consisted of 60 surfactant molecules, and the polymer chain lengths varied from 20 to 40 monomers. The force field parameters for PEO were adjusted by using 1,2-dimethoxymethane (DME) as a model compound and matching its hydration enthalpy and conformational behavior to experiment. Excellent agreement with previous experimental and simulation work was obtained through these modifications. The simulated scaling behavior of the PEO radius of gyration was also in close agreement with experimental results. The SDS-PEO simulations show that the polymer resides on the micelle surface and at the hydrocarbon-water interface, leading to a selective reduction in the hydrophobic contribution to the solvent-accessible surface area of the micelle. The association is mainly driven by hydrophobic interactions between the polymer and surfactant tails, while the interaction between the polymer and sulfate headgroups on the micelle surface is weak. The 40-monomer chain is mostly wrapped around the micelle, and nearly 90% of the monomers are adsorbed at low PEO concentration. Simulations were also performed with multiple 20-monomer chains, and gradual addition of polymer indicates that about 120 monomers are required to saturate the micelle surface. The stoichiometry of the resulting complex is in close agreement with experimental results, and the commonly accepted "beaded necklace" structure of the SDS-PEO complex is recovered by our simulations.     

Self-assembly of poly(allylamine hydrochloride) through electrostatic interaction with sodium dodecyl sulfate

The self-assembly of poly(allylamine hydrochloride) (PAH) through an electrostatic interaction with sodium dodecyl sulfate (SDS) was explored. PAH itself showed no self-assembly in water. A light scattering study demonstrated that PAH formed monodispersed spherical aggregates in water in the presence of SDS. The hydrodynamic diameter of the aggregates was estimated to be ca. 170 nm based on the cumulant analysis. The scattering intensity and UV absorbance at 258 nm based on the aggregation increased with an increase in the molar ratio of SDS to the allylamine hydrochloride unit (SDS/AH), indicating an increase in the number of aggregates. On the other hand, the hydrodynamic diameter of aggregates was constant, i.e., independent of the SDS/AH ratio. The constant size of the aggregates in spite of the increase in the number of aggregates suggests the formation of the micellar aggregates by the intramolecular association through an electrostatic interaction.     

Effect of europium(III) chloride on the aggregation behavior of sodium dodecyl sulfate

The effect of EuCl3 on the aggregation processes of sodium dodecyl sulfate was investigated. Electrical conductivity data, combined with Eu(III) luminescence measurements, suggest that the formation of micelles involving EuCl3 and SDS occurs at low SDS concentration; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of EuCl3 to SDS concentration at values below the critical micelle concentration of the pure surfactant results in a much higher light scattering than that found just with SDS micelles. It was also found that the Eu(III)/DS- complexes are formed with a binding ratio which varies between 20 and 4, depending on the initial concentration of Eu(III). As the concentration increases, turbidity occurs initially, but solutions become clear subsequently. In contrast to the behavior of SDS in the presence of aluminum(III), no flocculation was observed. From the analysis of electrical conductivity data and comparison with other systems, it is suggested that growth of aggregates happens, probably with formation of nonspherical systems. At the highest concentrations these may involve just Eu(III) and DS- ions. The effect of temperature on the SDS micellization process was studied. The calculated free energy of SDS micellization is not dependent on the initial EuCl3 but is dependent on the final balance between the presence of counterions in solution (ionic strength) and the temperature.     

Interaction between poly(vinylimidazole) and sodium dodecyl sulfate: binding and adsorption properties at the silica/water interface

The adsorption properties (adsorbed amount, kinetics, and reversibility) of poly(vinylimidazole) (PVI) and sodium dodecyl sulfate from PVI/SDS mixed solutions on negatively charged silica substrates were studied at pH 9 using reflectometry and compared to that measured on colloidal silica by the solution depletion method. In this paper, we will try to gain insight into the effect of PVI/SDS complex composition on the adsorption characteristics of the complex and particularly on the kinetics of the complex adsorption and its consequence on the adsorption reversibility. The properties of the complex in solution were characterized by means of potentiometric titration at a constant pH, binding isotherm, and surface tension measurements. On the basis of the experimental results the prevailing mechanism of the SDS/PVI interaction and the properties of the PVI/SDS complex were evaluated. Both the PVI/SDS complex uptake and the kinetics of the adsorption decreased with the amount of SDS bound to PVI. At low PVI/SDS binding ([SDS](0)CAC) the incoming complex experiences a blocking barrier of an electrostatic nature. This barrier has been confirmed by reversibility measurement, and the respective roles of the complex structure and charge were assessed.     

Dynamics of adsorption of an oppositely charged polymer-surfactant mixture at the air-water interface: poly(dimethyldiallylammonium chloride) and sodium dodecyl sulfate

The dynamic adsorption behavior of mixtures of the cationic polymer poly(dimethyldiallylammonium chloride) [poly(dmdaac)] and the anionic surfactant sodium dodecyl sulfate (SDS) has been studied at the expanding liquid surface of an overflowing cylinder. A combination of ellipsometry and external reflection Fourier transform infrared spectroscopy was used to measure the adsorbed amounts of poly(dmdaac) and SDS as a function of the bulk surfactant concentration for various polymer concentrations in the range 0-0.2 g dm-3. Laser Doppler velocimetry was used to determine the surface age, which was approximately 1 s for solutions where the polymer adsorbed. The interfacial behavior is rationalized in terms of competition between surface activity and mass transport to the expanding surface. At low surfactant concentrations, adsorption of both poly(dmdaac) and SDS is enhanced as a result of the formation in solution of polymer-surfactant complexes that are more surface active than either component alone. The rate of adsorption of these complexes is diffusion-controlled, and their interfacial composition remains constant at three dmdaac units per SDS molecule over a 5-fold change in the surfactant concentration. For the higher polymer concentrations studied, the complexes saturate the air-water interface: the adsorbed amount is independent of the polymer concentration and remains constant also over a factor of 5 in the surfactant concentration. Once the number of bound surfactant molecules per dmdaac monomer exceeds 0.3, the complexes begin to form large aggregates, which are not surface active due to their slower mass transport. The adsorbed amount decreases rapidly on approach to the equivalence point (one SDS molecule per dmdaac monomer), and when it is reached, only a very small amount of material remains at the interface. At still higher surfactant concentrations, the free SDS adsorbs but there is no adsorbed poly(dmdaac). The dynamic adsorption data are compared with equilibrium measurements of the same system by Staples et al. (Langmuir 2002, 18, 5147), which show very different surface compositions and no significant change in surface coverage at the equivalence point.     

Polyelectrolyte complexation between poly(methacrylic acid,sodium salt) and poly(diallyldimethylammonium chloride) or poly[2‐(methacryloyloxyethyl) trimethylammonium chloride]

Polyelectrolyte complexes between poly(methacrylic acid, sodium salt) and poly(diallyldimethylammonium chloride) (PDADMAC) or poly[2‐(methacryloyloxyethyl)trimethylammonium chloride] (PMOETAC) form gels, liquid phases, or soluble complexes depending on charge ratio, total polymer loading, polymer molecular weight, and ionic strength. Increasing the ionic strength of the medium led most polyelectrolyte pairs to transition from gel through liquid complexes (complex coacervate) to soluble complexes. These transitions shift to higher ionic strengths for higher molecular weight polymers, as well as for PMOETAC compared to PDADMAC. The complex phases swelled with increasing polymer loading, ultimately merging with the supernatant phase at a critical polymer loading. The isolated liquid complex phases below and above this critical loading were temperature‐sensitive, showing cloud points followed by macroscopic phase separation upon heating. Incorporating 5 mol % lauryl methacrylate into the polyanion led to increased complex yield with PDADMAC, and increased resistance to ionic strength. In contrast, incorporating 30 mol % of oligo(ethylene glycol) methacrylate into the polyanion led to decreased complex yield, and to lower resistance to ionic strength. Two polyelectrolyte systems that produced liquid complexes were used to encapsulate hydrophobic oils, and in one case were used to demonstrate the feasibility of crosslinking the resulting capsule walls. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4129–4143, 2007     

Effect of ethanol on the interaction between poly(vinylpyrrolidone) and sodium dodecyl sulfate

The effect of ethanol on the interaction between the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic polymer poly(vinylpyrrolidone) (PVP) has been investigated using a range of techniques including surface tension, fluorescence, electron paramagnetic resonance (EPR), small-angle neutron scattering (SANS), and viscosity. Surface tension and fluorescence studies show that the critical micelle concentration (cmc) of the surfactant decreases to a minimum value around 15 wt % ethanol; that is, it follows the cosurfactant effect. However, in the presence of PVP, the onset of the interaction, denoted cmc(1), between the surfactant and the polymer is considerably less dependent on ethanol concentration. The saturation point, cmc(2), however, reflects the behavior of the cmc in that it decreases upon addition of ethanol. This results in a decrease in the amount of surfactant bound to the polymer [C(bound) = cmc(2) - cmc] at saturation. The viscosity of simple PVP solutions depends on ethanol concentration, but since SANS studies show that ethanol has no effect on the polymer conformation, the changes observed in the viscosity reflect the viscosity of the background solvent. There are significant increases in bulk viscosity when the surfactant is added, and these have been correlated with the polymer conformation extracted from an analysis of the SANS data and with the amount of polymer adsorbed at the micelle surface. Competition between ethanol and PVP to occupy the surfactant headgroup region exists; at low ethanol concentration, the PVP displaces the ethanol and the PVP/SDS complex resembles that formed in the absence of the ethanol. At higher ethanol contents, the polymer does not bind to the ethanol-rich micelle surface.     

Association of quaternized poly(4-vinylpyridine) and sodium dodecyl sulfate in water-alcohol solvents

Complexation of a cationic polyelectrolyte (partially quaternized poly(4-vinylpyridine)) and the anionic surfactant sodium dodecyl sulfate in aqueous-organic solutions with different ratios of the components is studied by ion-selective potentiometry, viscometry, spectrophotometry, and microelectrophoresis. Effects of the nature and composition of water-alcohol (methanol, ethanol, and isopropanol) mixtures on the parameters of binding of surfactant ions by polyelectrolytes, the hydrodynamic properties of complexes, and the phase state of the system are examined. The addition of small amounts of ethanol and isopropanol to water (20 vol % ethanol and 10 vol % isopropanol) leads to an increase in the intensity of sodium dodecyl sulfate binding by the polyelectrolyte. The addition of up to 30 vol % methanol is not accompanied by a change in the character of surfactant binding relative to that of the aqueous solution. The relationship between the complexing behavior of the polyelectrolyte and the structural features of mixed solvents is discussed.     

A conductivity study and calorimetric analysis of dried poly(sodium 4-styrene sulfonate)/poly(diallyldimethylammonium chloride) polyelectrolyte complexes

Ionically cross-linked polyelectrolyte complexes (PECs) of anionic poly(sodium 4-styrene sulfonate) (PSS) and cationic poly(diallyldimethylammonium chloride) (PDADMAC), xPSS.(1-x)PDADMAC, with molar fractions x ranging from 0.30 to 0.70, were prepared and subsequently dried. The PEC samples were analyzed by differential scanning calorimetry, and the ionic conductivity sigmadc of the samples was measured as a function of temperature by means of impedance spectroscopy. The thermograms display an endothermic peak in the temperature range of 90-143 degrees C, which is attributed to a glass transition of the PEC. The glass transition temperature Tg has a symmetric x dependence with a minimum at x=0.50. The temperature dependence of sigmadcT is not affected by the glass transition. The ionic conductivity of the samples before drying is three orders of magnitude larger than sigmadc after drying; nevertheless, their activation enthalpies are identical. Arrhenius parameters obtained from the systematic study of several PEC compositions are discussed. The ionic conductivity of the PSS-rich samples is significantly higher than sigmadc of PDADMAC-rich samples. This implies a relatively high Na+ mobility as compared to Cl(-) mobility in PEC. In contrast to the symmetric x dependence of Tg, the conductivity of PEC increases and the activation enthalpy decreases with increasing x in the investigated composition range. A strong x dependence of sigmadc is observed for PSS-rich PEC, which is attributed to a significant variation in the mobility of the charge carriers.     

Modulating the structure and properties of poly(sodium 4-styrenesulfonate)/poly(diallyldimethylammonium chloride) multilayers with concentrated salt solutions

Poly(sodium 4-styrenesulfonate) (PSS)/poly(diallyldimethylammonium chloride) (PDADMAC) multilayers were treated with 1-5 M NaCl solutions, resulting in continuous changes in the physicochemical properties of the multilayers. Significant mass loss was observed when the salt concentration was higher than 2 M and reached as high as 72% in a 5 M NaCl solution. The disassembly occurred initially in the superficial layers and then developed in the bulk multilayers. For the multilayers with PDADMAC as the outmost layer, the molar ratio of PSS/PDADMAC was increased and the surface chemistry was changed from PDADMAC domination below 2 M NaCl to PSS domination above 3 M NaCl. Owing to the higher concentrations of uncompensated for polyelectrolytes at both lower and higher salt concentrations, the swelling ratio of the multilayers was decreased until reaching 3 M NaCl and then was increased significantly again. The salt-treated PSS/PDADMAC thin films are expected to show different behaviors in terms of the physical adsorption of various functional substances, cell adhesion and proliferation, and chemical reaction activity.