Slice imaging of the photodissociation of acetaldehyde at 248 nm. Evidence of a roaming mechanism

The photodissociation of acetaldehyde in the molecular channel yielding CO and CH(4) at 248 nm has been studied, probing different rotational states of the CO(nu = 0) fragment by slice ion imaging using a 2+1 REMPI scheme at around 230 nm. From the slice images, clear evidence of the co-existence of two different mechanisms has been obtained. One of the mechanisms is consistent with the well-studied conventional transition state in which CO products appear rotationally excited, and the second is consistent with a roaming mechanism. This roaming mechanism is characterized by a low rotational energy disposal into the CO fragment as well as by a very low kinetic energy release, corresponding to a high internal energy in the CH(4) counter-fragment.     

Hydrogen-atom production channels of acetaldehyde photodissociation: Direct DFT molecular dynamics study

Direct density-functional (DFT) molecular dynamics (MD) calculations have been carried out for the following two hydrogen-atom production channels in acetaldehyde photodissociation on the lowest triplet-state (T₁) potential energy surface (PES): CD₃CHO → CD₂CHO + D (1) and CD₃CHO → CD₃CO + H (2). The employed DFT method was B3LYP with the cc-pVDZ basis set. The average product hydrogen kinetic energies estimated from the results of the direct DFT MD calculations were 18.3 and 16.6 kcal mol⁻¹ for reactions 1 and 2, respectively, and these were half – two thirds of the previously measured values [T.Y. Kang, S.W. Kang, H.L. Kim, Chem. Phys. Lett. 434 (2007) 6]. This is because of the low reverse barrier heights predicted at the B3LYP/cc-pVDZ level. The present results for the product hydrogen kinetic energies, however, agree qualitatively with the experimental measurements and strongly supports the mechanisms taking place on the T₁ PES.     

The formation and decay mechanisms of HCO in the photodissociation of gas phase acetaldehyde

The kinetic mechanism for the formation and decay of HCO(0,0,0) following flashlamp excitation (10 μs pulse width) into the ¹A″ → ¹A′ absorption transition of gas phase acetaldehyde (0.2 Torr) was examined by time-resolved intracavity laser detection (TRMD) and by phosphorescence lifetime measurements. The HCO radical was found to appear primarily in the vibrationless level reaching a maximum concentration about 250 μs after the excitation of acetaldehyde. The formation rate of HCO(0,0,0) was observed to be insensitive to an order of magnitude change in the number of collisions of excited-state acetaldehyde with either argon, cyclohexane, or the cell wall. Contrastingly, the decay rate of HCO exhibited a strong dependence on the collisional environment. The rate constants for HCO(0,0,0) decay by collisions with acetaldehyde, argon, and cyclohexane and by reaction with O₂ were measured by TRILD. The rate constant for O₂, quenching of ³A″ phosphorescence was also obtained.The potential for HCO(0,0,0) being either a primary or secondary dissociation product is considered in the formulation of a kinetic mechanism describing both the formation and decay behavior observed. Evidence is presented in support of a mechanism in which (1) HCO(0,0,0) is formed by the thermal reaction between acetyl radicals. CH₃CO, and ground-state acetaldehyde after excited-state acetaldehyde undergoes primary dissociation to CH₃CO, and (2) HCO(0,0,0) decays principally by collisionally-induced dissociation at the cell wall.     

Velocity-map imaging study of the photodissociation of acetaldehyde

Velocity-map imaging studies are reported for the photodissociation of acetaldehyde over a range of photolysis wavelengths (317.5-282.5 nm). Images are obtained for both the HCO and CH3 fragments. The mean rotational energy of both fragments increases with photodissociation energy, with a lesser degree of excitation in the CH3 fragment. The CH3 images demonstrate that the CH3 fragments are rotationally aligned with respect to the recoil direction and this is interpreted, and well modeled, on the basis of a propensity for forming CH3 fragments with M approximately K, where M is the projection of the rotational angular momentum along the recoil direction. The origin of the CH3 rotation is conserved motion from the torsional and methyl-rocking modes of the parent molecule. Nonstatistical vibrational distributions for the CH3 fragment are obtained at higher energies.     

A classical trajectory study of the photodissociation of T1 acetaldehyde: the transition from impulsive to statistical dynamics

Previous experimental and theoretical studies of the radical dissociation channel of T(1) acetaldehyde show conflicting behavior in the HCO and CH(3) product distributions. To resolve these conflicts, a full-dimensional potential-energy surface for the dissociation of CH(3)CHO into HCO and CH(3) fragments over the barrier on the T(1) surface is developed based on RO-CCSD(T)/cc-pVTZ(DZ) ab initio calculations. 20,000 classical trajectories are calculated on this surface at each of five initial excess energies, spanning the excitation energies used in previous experimental studies, and translational, vibrational, and rotational distributions of the radical products are determined. For excess energies near the dissociation threshold, both the HCO and CH(3) products are vibrationally cold; there is a small amount of HCO rotational excitation and little CH(3) rotational excitation, and the reaction energy is partitioned dominantly (>90% at threshold) into relative translational motion. Close to threshold the HCO and CH(3) rotational distributions are symmetrically shaped, resembling a Gaussian function, in agreement with observed experimental HCO rotational distributions. As the excess energy increases the calculated HCO and CH(3) rotational distributions are observed to change from a Gaussian shape at threshold to one more resembling a Boltzmann distribution, a behavior also seen by various experimental groups. Thus the distribution of energy in these rotational degrees of freedom is observed to change from nonstatistical to apparently statistical, as excess energy increases. As the energy above threshold increases all the internal and external degrees of freedom are observed to gain population at a similar rate, broadly consistent with equipartitioning of the available energy at the transition state. These observations generally support the practice of separating the reaction dynamics into two reservoirs: an impulsive reservoir, fed by the exit channel dynamics, and a statistical reservoir, supported by the random distribution of excess energy above the barrier. The HCO rotation, however, is favored by approximately a factor of 3 over the statistical prediction. Thus, at sufficiently high excess energies, although the HCO rotational distribution may be considered statistical, the partitioning of energy into HCO rotation is not.     

Elimination of methane from protonated acetaldehyde: The Ab initio transition state

The transition state (TS) for loss of CH₄ from protonated acetaldehyde has been located at the second-order Moller-Plesset (MP2)/6-31G(d,p) level of theory. The activation energy is predicted to be 263.9 kJ/mol starting from the more stable form (methyl and hydrogen E) and 261.6 kJ/mol starting from the less stable form (methyl and hydrogen Z) that is required for reaction. The products (methane and the formyl ion) are predicted to lie 136.6 kJ/mol below the TS for their formation. MP2 methods underestimate the heats of formation of both the TS and the reaction products by about 40 kJ/mol when compared with experiment. Restricted Hartree-Fock (RHF) calculations give much more accurate relative energies. The MP2 TS leads directly to fragmentation and is described as a protonation of the methyl group by the acidic proton on oxygen. Under RHF theory the reaction is stepwise. An RHF TS similar to the MP2 TS leads to a nonclassical intermediate (which is stable at this level of theory) that has one of the C---H bonds protonated. This mechanism (protonation of an alkyl group) appears to be a general one for high energy 1,2 eliminations from organic cations. (J Am Soc Mass Spectrom 1994, 5, 1102-1106)     

Imaging CH3SH photodissociation at 204 nm: the SH + CH3 channel

The SH + CH(3) product channel for the photodissociation of CH(3)SH at 204 nm was investigated using the sliced velocity map ion imaging technique with the detection of CH(3) products using state selective (2+1) resonance enhanced multiphoton ionization (REMPI). Images were measured for CH(3) formed in the ground and excited vibrational states (v(2) = 0, 1, and 2) of the umbrella mode from which the correlated SH vibrational state distributions were determined. The vibrational distribution of the SH fragment in the SH + CH(3) channel at 204 nm is clearly inverted and peaks at v = 1. The highly negative anisotropy parameter of the CH(3) (v(2) = 0, 1, and 2) products is indicative of a fast dissociation process for C-S bond cleavage. Two kinds of slower CH(3) products were also observed (one of which was partly vibrationally resolved) that are assigned to a two-step photodissociation processes, in which the first step is the production of the CH(3)S (X(2)E) radical via cleavage of the S-H bond in CH(3)SH, followed by probe laser photodissociation of nascent CH(3)S radicals yielding CH(3)(X(2)A(1), v(2) = 0-2) + S((3)P(j)/(1)D) products.     

Theoretical study on the transition state of oxaphosphetane formation between ethylidenetriphenylphosphorane and acetaldehyde

The MNDO MO calculations were carried out for the formation of oxaphosphetanes from substituted ylides and aldehydes (Equations 2–4). It was found that the reactions proceed through a nearly planar cyclic four-membered ring transition state (TS) in all cases studied and that phenyl substitution on phosphorus has little effect on the TS geometry. This finding is not in line with the TS models that have been proposed to explain the experimentally observed cis-selectivity.     

Shock tube explorations of roaming radical mechanisms: the decompositions of isobutane and neopentane

The thermal decompositions of isobutane and neopentane have been studied using both shock tube experiments and ab initio transition state theory based master equation calculations. Dissociation rate constants for these molecules have been measured at high temperatures (1260-1566 K) behind reflected shock waves using high-sensitivity H-ARAS detection. The two major dissociation channels at high temperature are iso-C(4)H(10) → CH(3) + i-C(3)H(7) (1a) and neo-C(5)H(12) → CH(3) + t-C(4)H(9) (2a). Ultrahigh-sensitivity ARAS detection of H-atoms produced from the rapid decomposition of the product radicals, i-C(3)H(7) in (1a) and t-C(4)H(9) in (2a), through i-C(3)H(7) + M → H + C(3)H(6) + M (3a) and t-C(4)H(9) + M → H + i-C(4)H(8) + M (4a) allowed measurements of both the total decomposition rate constants, k(total), and the branching to radical products, which were observed to be equivalent in both systems, k(1a)/k(total) and k(2a)/k(total) = 0.79 ± 0.05. Theoretical analyses indicate that in isobutane, the non-H-atom fraction has two contributions, the dominant fraction being due to the roaming radical mechanism leading to molecular products through iso-C(4)H(10) → CH(4) + C(3)H(6) (1b) with k(1b)/k(total) = 0.16, and a minor fraction that involves the isomerization of i-C(3)H(7) to n-C(3)H(7) that then subsequently forms methyl radicals, i-C(3)H(7) + M → n-C(3)H(7) + M → CH(3) + C(2)H(4) + M (3b). In contrast to isobutane, in neopentane, the contribution to the non-H-atom fraction is exclusively through the roaming radical mechanism that leads to neo-C(5)H(12) → CH(4) + i-C(4)H(8) (2b) with k(2b)/k(total) = 0.21. These quantitative measurements of larger contributions from the roaming mechanism for larger molecules are in agreement with the qualitative theoretical arguments that suggest long-range dispersion interactions (which become increasingly important for larger molecules) may enhance roaming.     

Photoisomerization and photodissociation of toluene in molecular beam

The photodissociation of isotope-labeled toluene C(6)H(5)CD(3) and C(6)H(5)(13)CH(3) molecules at 6.4 eV under collision-free conditions was studied in separate experiments by multimass ion imaging techniques. In addition to the major dissociation channels, C(6)H(5)CD(3) --> C(6)H(5)CD(2) + D and C(6)H(5)CD(3) --> C(6)H(5) + CD(3), the respective photofragments CD(2)H, CDH(2), and CH(3) and their heavy fragment partners C(6)H(4)D, C(6)H(3)D(2), and C(6)H(2)D(3) were observed from C(6)H(5)CD(3) dissociation. Photofragments (13)CH(3) and CH(3), and their heavy fragment partners C(6)H(5) and (13)CC(5)H(5), were also observed from C(6)H(5)(13)CH(3) dissociation. Our results show that 25% of the excited toluene isomerizes to a seven-membered ring (cycloheptatriene) and then rearomatizes prior to dissociation. The isomerization pathway competes with direct C-C bond and C-H bond dissociation. The significance of this isomerization is that the carbon atoms and hydrogen atoms belonging to the alkyl group are involved in an exchange with those atoms in the aromatic ring during isomerization. The dissociation rate of toluene at 193 nm is measured to be (1.17 +/- 0.1) x 10(6) s(-)(1).     

Solid state molecular structures of transition metal hexafluorides

Single-crystal structure determinations of all nine transition metal hexafluorides (Mo, Tc, Ru, Rh, W, Re, Os, Ir, and Pt) at -140 degrees C are presented. All compounds crystallize alike and have the same molecular structure. The bond length sequence r(w-F) congruent with r(Re-F) congruent with r(Os-F) < r(Ir-F) < r(Pt-F) is confirmed and paralleled by the sequence r(Mo-F) congruent with r(Tc-F) congruent with r(Ru-F) < r(Rh-F). Within the limits of precision, no systematic deviation from octahedral symmetry can be established. DFT and ab initio calculations predict octahedral structures for MoF6 and RhF6 and tetragonally distorted structures for ReF6 and RuF6. The energy barrier toward octahedral structures is only 2.5 kJ mol(-1) in the two latter cases. Calculated electron affinities are in the sequence MoF6 < TcF6 < RhF6 < RuF6 with a value of 6.98 eV for the latter. O2+RhF6- crystallized in an undisordered manner in P, isostructural to the low-temperature form of O2+AuF6-. RhF6- has a D4h compressed octahedral structure, while AuF6- is essentially octahedral. The absorption spectrum of TcF6 and the 19F and 195NMR spectra of PtF6 are presented.     

Exploring molecular complexity: conical intersections and NH3 photodissociation

The role of conical intersections in the photodissociation of the A 1A2" state of NH3 is investigated using extended atomic basis sets and a configuration state function expansion of approximately 8.5 million terms. A previously unknown portion of the 1 1A-2 1A seam of conical intersections with only C(s) symmetry is located. This portion of the seam is readily accessible from the equilibrium geometry of the A 1A2" state. These conical intersections are expected to play a role in the competition between adiabatic and nonadiabatic pathways for NH3(A 1A2") photodissociation.     

Insight into the mechanisms of the ethylbenzene disproportionation: transition state shape selectivity on zeolites

The direct experimental evidence shows that ethylbenzene disproportionation is a transition state shape selective reaction on zeolites: a bimolecular reaction mechanism via diphenylethane-mediated pathway on large-pore zeolites X and Y (ca. 0.74 nm) and a monomolecular reaction mechanism on medium-pore zeolites ZSM-5 (ca. 0.56 nm) via the ethoxy-mediated intermolecular ethyl group transfer. The lifetime of bulky diphenylethane species was prolonged by a fine-tune of FAU-zeolites, which makes this transition state detectable by 13C MAS NMR spectroscopy. Due to tunable catalytic properties and pore shapes, zeolites are promising catalysts toward emulating the efficiency and selectivity in desired reactions.     

Separability of tight and roaming pathways to molecular decomposition

Recent studies have questioned the separability of the tight and roaming mechanisms to molecular decomposition. We explore this issue for a variety of reactions including MgH(2) → Mg + H(2), NCN → CNN, H(2)CO → H(2) + CO, CH(3)CHO → CH(4) + CO, and HNNOH → N(2) + H(2)O. Our analysis focuses on the role of second-order saddle points in defining global dividing surfaces that encompass both tight and roaming first-order saddle points. The second-order saddle points define an energetic criterion for separability of the two mechanisms. Furthermore, plots of the differential contribution to the reactive flux along paths connecting the first- and second-order saddle points provide a dynamic criterion for separability. The minimum in the differential reactive flux in the neighborhood of the second-order saddle point plays the role of a mechanism divider, with the presence of a strong minimum indicating that the roaming and tight mechanisms are dynamically distinct. We show that the mechanism divider is often, but not always, associated with a second-order saddle point. For the formaldehyde and acetaldehyde reactions, we find that the minimum energy geometry on a conical intersection is associated with the mechanism divider for the tight and roaming processes. For HNNOH, we again find that the roaming and tight processes are dynamically separable but we find no intrinsic feature of the potential energy surface associated with the mechanism divider. Overall, our calculations suggest that roaming and tight mechanisms are generally separable over broad ranges of energy covering most kinetically relevant regimes.     

Polarization of thallium atoms produced in molecular photodissociation: experiment and theory

A study has been made of the oriented ground state Tl(6² P _1/2) atoms produced in the photodissociation of TlBr molecules by circularly polarized 266-nm laser light. A significant degree of atomic orientation (15%) has been measured in the experiment which corresponds to the initial degree of orientation of 37%. A high value of depolarization cross section (210 Ų) for the oriented Tl atoms colliding with TlBr molecules has been also observed. The obtained experimental results have been treated theoretically. We present a general quantum mechanical theory of the orientation phenomenon in which all possible nonadiabatic interactions as well as molecular rotation are properly treated. The application of the theory to the case of TlBr photodissociation allowed to understand the obtained experimental results and to evaluate the probability of the earlier unknown radial nonadiabatic transition in the decaying molecule.     

Adiabatic photodissociation of acenaphthylene dimers in the excited singlet state

Fluorescence spectroscopic studies of acenaphthylene dimers in saturated hydrocarbon solution have revealed that the dimer (A₂) photodissociates to     

Nuclear spin state conservation in photodissociation of formaldehyde

Excitation of formaldehyde to the 2¹4¹ band of the S₁ state leads to photodissociation with nuclear spin state conservation of the hydrogen. Dissociation of ortho-formaldehyde gives ortho-hydrogen as a product. Interconversion between ortho- and para-formaldehyde at 1 Torr occurs with a rate constant greater than 0.1 min^?1.     

Carbonylation of acetaldehyde in the presence of transition metal compounds

The carbonylation of acetaldehyde to give butyl lactate has been carried out in the presence of rhodium and cobalt compounds atP _CO=5–9 MPa andT=383–483 K.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 570–571, March, 1995.     

Involvement of excited triplet state in the photodissociation of cyclobutane

The potential energy curves (PECs) of the ground state and the low‐lying excited states for the photodissociation of cyclobutane have been calculated at the multi‐reference configuration interaction with singlet and doublet excitation (MRCISD) and the multi‐reference second order perturbation theory (MRPT2). Firstly, the PECs are constructed following a reaction path determined by semiclassical dynamics simulation, which suggests that the lowest triplet state of tetramethylene is involved in the photodissociation of cyclobutane. Then, the adiabatic PECs are calculated for the breaking processes of C1? C3 and C2? C4 bond respectively. The singlet‐triplet PECs' intersections have been found in the two breaking C? C bond processes. During the breaking process of the second C2? C4 bond, a local minimum has been found on the PEC of the lowest triplet state, which gives us some insight to reinterpret the experimental observed diradical intermediate as being trapped in its triplet state. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008