液相色谱指纹图谱在当归、黄芪及其复方有效成分分析中的应用

将液相色谱指纹图谱与正辛醇-水分配体系模拟中药在人体内的吸收情况相结合分析中药活性成分,分析比较了当归、黄芪单煎液及合煎液在不同靶位酸度下化学成分种类、含量的变化情况,探讨了配伍及酸度变化对中药中各成分的形态分布及在人体中吸收情况的影响.发现不同靶位环境的酸度及不同配伍对中药中的有效物质组分、含量及各组分的吸收都有很大的影响.     

A Pyrene Derivative for Hg2+‐Selective Fluorescent Sensing and Its Application in In Vivo Imaging

An Hg²⁺‐selective fluorescent sensor ( 1 ) bearing pyrene as a fluorophore was synthesized. A sandwich‐stacking binding mode was formed during the binding process, which increased the excimer fluorescence 22‐fold at 490 nm. Compound 1 was successfully applied in in vivo imaging to trace the enrichment and distribution of mercury in the nervous system, digestive system, and reproductive system of Caenorhabditis elegans, as well as the organs of zebrafish.     

高压密闭消解-原子吸收光度法同时测定土壤中的铜、锌、铅、镉、镍、铬

采用高压密闭消解-原子吸收光度法同时测定土壤中铜、锌、铅、镉、镍、铬6种重金属元素。通过剖析不同消解体系,选择了最佳消解条件和测定条件。测定土壤中各元素的回收率均在86%～110%之间,相对标准偏差均小于8.0%(n=6)。     

Descartes,Cardiac Heat,and Alchemy

René Descartes (1596–1650) insisted on a heat and light theory to explain cardiac movement, and used concepts such as distillation of the vital spirits, fermentation in the digestive process, and fermentation in the circulation of the blood. I argue that his theory of the body as a heat-exchange system was based on alchemical and natural philosophical notions of fire and light expounded by precursors and contemporaries who included Jean D'Espagnet, Jean Fernel, Jan Baptist van Helmont, and Andreas Libavius. Descartes endeavoured to mechanise their approaches, creating a theory in which fire and heat, a legacy from thermal explanations of physiology, were transformed into alchemical fire, and then into mechanistic or physicalist heat.     

Metabolic routes along digestive system of licorice: multicomponent sequential metabolism method in rat

This study was conducted to establish the multicomponent sequential metabolism (MSM) method based on comparative analysis along the digestive system following oral administration of licorice (Glycyrrhiza uralensis Fisch., leguminosae), a traditional Chinese medicine widely used for harmonizing other ingredients in a formulae. The licorice water extract (LWE) dissolved in Krebs–Ringer buffer solution (1 g/mL) was used to carry out the experiments and the comparative analysis was performed using HPLC and LC‐MS/MS methods. In vitro incubation, in situ closed‐loop and in vivo blood sampling were used to measure the LWE metabolic profile along the digestive system. The incubation experiment showed that the LWE was basically stable in digestive juice. A comparative analysis presented the metabolic profile of each prototype and its corresponding metabolites then. Liver was the major metabolic organ for LWE, and the metabolism by the intestinal flora and gut wall was also an important part of the process. The MSM method was practical and could be a potential method to describe the metabolic routes of multiple components before absorption into the systemic blood stream. Copyright © 2015 John Wiley & Sons, Ltd.     

Chemical Composition,Antioxidant and Enzyme Inhibitory Activities of Onosma bourgaei and Onosma trachytricha and in Silico Molecular Docking Analysis of Dominant Compounds

The aim of this study was to investigate the chemical composition, antioxidant and enzyme inhibitory activities of methanol (MeOH) extracts from Onosma bourgaei (Boiss.) and O. trachytricha (Boiss.). In addition, the interactions between phytochemicals found in extracts in high amounts and the target enzymes in question were revealed at the molecular scale by performing in silico molecular docking simulations. While the total amount of flavonoid compounds was higher in O. bourgaei, O. trachytricha was richer in phenolics. Chromatographic analysis showed that the major compounds of the extracts were luteolin 7-glucoside, apigenin 7-glucoside and rosmarinic acid. With the exception of the ferrous ion chelating assay, O. trachytricha exhibited higher antioxidant activity than O. bourgaei. O. bourgaei exhibited also slightly higher activity on digestive enzymes. The inhibitory activities of the Onosma species on tyrosinase were almost equal. In addition, the inhibitory activities of the extracts on acetylcholinesterase (AChE) were stronger than the activity on butyrylcholinesterase (BChE). Molecular docking simulations revealed that luteolin 7-glucoside and apigenin 7-glucoside have particularly strong binding affinities against ChEs, tyrosinase, α-amylase and α-glucosidase when compared with co-crystallized inhibitors. Therefore, it was concluded that the compounds in question could act as effective inhibitors on cholinesterases, tyrosinase and digestive enzymes.     

Target label-free, reagentless electrochemical DNA biosensor based on sub-optimum displacement

One of the most time consuming and complex steps in the detection of DNA target with a biosensor is the previous labeling of the target. In this paper, a novel target label-free, reagentless and easy to use DNA biosensor is reported. Electrochemical transduction (cyclic voltammetry, differential pulse voltammetry and impedance spectroscopy) and optical red out by surface plasmon resonance were chosen for the platform optimization. This target label-free DNA detection method is based on displacement of sub-optimum labeled oligonucleotide. This strategy requires the pre-hybridization of the capture probe immobilized on the electrode surface with a sub-optimum mutated oligonucleotide pre-labeled with an electrochemically active ferrocene moiety. Due to the higher affinity of the target that is fully complementary to the capture probe, the sub-optimum ferrocene-labeled sequence is displaced when the fully complementary target is introduced into the system. The decrease of the electrochemical signal from the ferrocene verifies the presence of the target, which is proportional to the target concentration. A variation of this strategy was employed to enhance the ferrocene signal. A diffusional mediator, ferrocyanide, was introduced in the system to help in this purpose. This platform attains a stable, specific and reproducible response (5-15%), with a detection limit in the range of microM. This electrochemical sensor is the first example of this kind of sensor to detect cystic fibrosis, however, this configuration could be generically applied to any application where the detection of a DNA target is involved.     

Synthesis of a novel conformationally locked carbocyclic nucleoside ring system

[reaction: see text] A fast and efficient synthetic route to novel Northern locked carbocyclic nucleosides (as precursors of carbocyclic locked nucleic acids or cLNAs) is described. The target nucleoside with a oxabicyclo[2.2.1]heptane ring system was prepared from a simple starting material, diethyl malonate. Ring closure by intramolecular O-alkylation provided the target ring system as the major isomer over the [3.2.0] oxetane system. The adenine moiety was introduced through a reactive triflate after inversion of the stereochemistry of the corresponding alcohol by oxidation and reduction.     

Gram-scale synthesis of monodisperse gold colloids by the solvated metal atom dispersion method and digestive ripening and their organization into two- and three-dimensional structures

We describe a synthetic procedure for preparation of large quantities of monodisperse thiol-stabilized gold colloids in toluene solution. The method is based on the solvated metal atom dispersion technique (SMAD), which is very suitable for preparation of large amounts of metal colloidal solutions, as well as of metal sulfide, metal oxide, and other types of dispersed compounds in different solvents. A combination of two different solvents like acetone and toluene is used for the preparation of the gold colloids. The necessity of initially carrying out the SMAD reaction in acetone comes from its high degree of solvation of gold particles. Acetone acts as a preliminary stabilizing agent. After its removal from the system, the particles are stabilized by dodecanethiol molecules, which enable their very good dispersion in toluene solution. A digestive ripening procedure is carried out with the gold-toluene colloid, and for this purpose pure toluene as solvent is necessary. This has a dramatic effect on the narrowing of particle size distribution and almost monodisperse colloids are obtained (some discussion of the probable mechanism of this remarkable digestive ripening step is given). These colloidal solutions have a great tendency to organize in two- and three-dimensional structures (nanocrystal superlattices, NCSs). We believe that this procedure provides a real opportunity to synthesize large amounts of gold nanocrystals as well as NCSs.     

Design, construction, and characterization of high-performance membrane fusion devices with target-selectivity

Membrane fusion proteins such as the hemagglutinin glycoprotein have target recognition and fusion accelerative domains, where some synergistically working elements are essential for target-selective and highly effective native membrane fusion systems. In this work, novel membrane fusion devices bearing such domains were designed and constructed. We selected a phenylboronic acid derivative as a recognition domain for a sugar-like target and a transmembrane-peptide (Leu-Ala sequence) domain interacting with the target membrane, forming a stable hydrophobic α-helix and accelerating the fusion process. Artificial membrane fusion behavior between the synthetic devices in which pilot and target liposomes were incorporated was characterized by lipid-mixing and inner-leaflet lipid-mixing assays. Consequently, the devices bearing both the recognition and transmembrane domains brought about a remarkable increase in the initial rate for the membrane fusion compared with the devices containing the recognition domain alone. In addition, a weakly acidic pH-responsive device was also constructed by replacing three Leu residues in the transmembrane-peptide domain by Glu residues. The presence of Glu residues made the acidic pH-dependent hydrophobic α-helix formation possible as expected. The target-selective liposome-liposome fusion was accelerated in a weakly acidic pH range when the Glu-substituted device was incorporated in pilot liposomes. The use of this pH-responsive device seems to be a potential strategy for novel applications in a liposome-based delivery system.     

Purification and Biochemical Characterization of an Acid-Stable Lipase from the Pyloric Caeca of Sardine (Sardinella aurita)

A lipolytic activity was located in the sardine digestive glands (pyloric caeca), from which a sardine digestive lipase (SaDL) was purified. Pure SaDL has a molecular mass of 43 kDa as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis. The enzyme was found to be more active on short-chain triacylglycerols than on long-chain ones. SaDL does not present the interfacial activation phenomenon. Control experiments were performed under the same experimental conditions, with dromedary and turkey pancreatic lipases and showed a positive interfacial activation phenomenon. Sodium deoxycholate (NaDC) has an inhibitory effect on the lipase activity. The pure enzyme lost 40% of its activity in presence of 8 mM NaDC. SaDL was found to be mostly stable at low pH values. Interestingly, no colipase was detected in the sardine pyloric caeca. Analogous results were reported for the scorpion and the crab digestive systems. This is in line with the idea that colipase might has evolved in mammal animals simultaneously with the appearance of an exocrine pancreas. No similarity was found between the NH₂-terminal amino acid residues of SaDL and those of lipases from the digestive tract of other species. Altogether, these results suggest that SaDL is a member of a new group of lipases belonging to aquatic species.     

Separation of WAP-8294A components, a novel anti-methicillin-resistant staphylococcus aureus antibiotic, using high-speed counter-current chromatography.

The WAP-8294A complex was isolated from the fermentation broth of Lysobacter sp. WAP-8294, whose major component, WAP-8294A2, showed a strong activity against Gram-positive bacteria including methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococci in vitro, and also exhibited a potent activity against MRSA in vivo. The previous separation procedure using the conventional chromatographic methods was laborious and time-consuming, and the recovery of the desired compound was often unsatisfactory. In the present study, high-speed counter-current chromatography (HSCCC) was applied to the separation of the main components of the WAP-8294A complex. Due to the high polarity of the target compounds, we selected a hydrophilic two-phase solvent system composed of n-butanol-ethyl acetate-aqueous 0.005 M trifluoroacetic acid (1.25:3.75:5, v/v/v) which provided a suitable range of partition coefficient values for these compounds. Although the settling time of this solvent system was much longer than the optimum range, suggesting a low retention of the stationary phase under the standard experimental conditions, the separation was successfully performed at the low flow-rate of 0.5 ml/min. A sample size of 25 mg yielded pure fractions of three components (1-6 mg). The identification of each component was carried out by HPLC and fast atom bombardment mass spectrometry. The method will contribute to the clinical development of WAP-8294A2 as an anti-MRSA agent.     

Crystal nucleation, growth, and morphology of the synthetic malaria pigment beta-hematin and the effect thereon by quinoline additives: the malaria pigment as a target of various antimalarial drugs

The morphology of micrometer-sized beta-hematin crystals (synthetic malaria pigment) was determined by TEM images and diffraction, and by grazing incidence synchrotron X-ray diffraction at the air-water interface. The needle-like crystals are bounded by sharp {100} and {010} side faces, and capped by {011} and, to a lesser extent, by {001} end faces, in agreement with hemozoin (malaria pigment) crystals. The beta-hematin crystals grown in the presence of 10% chloroquine or quinine took appreciably longer to precipitate and tended to be symmetrically tapered toward both ends of the needle, due to stereoselective additive binding to {001} or {011} ledges. Evidence, but marginal, is presented that additives reduce crystal mosaic domain size along the needle axis, based on X-ray powder diffraction data. Coherent grazing exit X-ray diffraction suggests that the mosaic domains are smaller and less structurally stable than in pure crystals. IR-ATR and Raman spectra indicate molecular based differences due to a modification of surface and bulk propionic acid groups, following additive binding and a molecular rearrangement in the environment of the bulk sites poisoned by occluded quinoline. These results provided incentive to examine computationally whether hemozoin may be a target of antimalarial drugs diethylamino-alkoxyxanthones and artemisinin. A variation in activity of the former as a function of the alkoxy chain length is correlated with computed binding energy to {001} and {011} faces of beta-hematin. A model is proposed for artemisinin activity involving hemozoin nucleation inhibition via artemisinin-beta-hematin adducts bound to the principal crystal faces. Regarding nucleation of hemozoin inside the digestive vacuole of the malaria parasite, nucleation via the vacuole's membranous surface is proposed, based on a reported hemozoin alignment. As a test, a dibehenoyl-phosphatidylcholine monolayer transferred onto OTS-Si wafer nucleated far more beta-hematin crystals, albeit randomly oriented, than a reference OTS-Si.     

Application of prodrugs to inflammatory diseases of the gut

Oral delivery is the most common and preferred route of drug administration although the digestive tract exhibits several obstacles to drug delivery including motility and intraluminal pH profiles. The gut milieu represents the largest mucosal surface exposed to microorganisms with 10(10-12) colony forming bacteria/g of colonic content. Approximately, one third of fecal dry matter is made of bacteria/ bacterial components. Indeed, the normal gut microbiota is responsible for healthy digestion of dietary fibers (polysaccharides) and fermentation of short chain fatty acids such as acetate and butyrate that provide carbon sources (fuel) for these bacteria. Inflammatory bowel disease (IBD) results in breakage of the mucosal barrier, an altered microbiota and dysregulated gut immunity. Prodrugs that are chemically constructed to target colonic release or are degraded specifically by colonic bacteria, can be useful in the treatment of IBD. This review describes the progress in digestive tract prodrug design and delivery in light of gut metabolic activities.     

Microaffinity purification of proteins based on photolytic elution: toward an efficient microbead affinity chromatography on a chip

A bead affinity chromatography system, which was based on the photolytic elution method, was integrated into a glass-silicon microchip to purify specific target proteins. CutiCore beads, which were coupled with a photo-cleavable ligand, such as biotin and an RNA aptamer, were introduced into a filter chamber in the microchip. The protein mixture containing target protein labeled with fluorescein isothiocyanate (FITC) was then passed through the packed affinity beads in the microchamber by pressure-driven flow. During the process, the adsorbed protein on the bead was monitored by fluorescence. The concentrated target protein on the affinity bead was released by simple irradiation with UV light at a wavelength of 360 nm, and subsequently eluted with the phosphate buffer flow. The eluted target protein was quantitatively detected via the fluorescence intensity measurements at the downstream of the capillary connected to the outlet of the microchip. The microaffinity purification allowed for a successful method for the identification of specific target proteins from a protein mixture. In addition, the feasibility of this system for use as a diagnosis chip was demonstrated.     

Helically chiral functionalized [6]helicene: Synthesis,optical resolution,and photophysical properties

A short and efficient synthetic pathway leading to a new chiral π-conjugated system is reported. The X-ray structure of the target compound was determined and showed a helical conformation. Its resolution was successfully accomplished, leading to two enantiomers in high optical purity, and their chiroptical properties were examined experimentally. The photophysical properties of the organic material were also evaluated, showing an emission in the visible region, and HOMO and LUMO levels have been estimated experimentally, demonstrating an electrochemical band gap of 2.37 eV.     

A novel technology for the detection, enrichment, and separation of trace amounts of target DNA based on amino-modified fluorescent magnetic composite nanoparticles

A novel, highly sensitive technology for the detection, enrichment, and separation of trace amounts of target DNA was developed on the basis of amino-modified fluorescent magnetic composite nanoparticles (AFMN). In this study, the positively charged amino-modified composite nanoparticles conjugate with the negatively charged capture DNA through electrostatic binding. The optimal combination of AFMN and capture DNA was measured by dynamic light scattering (DLS) and UV–vis absorption spectroscopy. The highly sensitive detection of trace amounts of target DNA was achieved through enrichment by means of AFMN. The detection limit for target DNA is 0.4 pM, which could be further improved by using a more powerful magnet. Because of their different melting temperatures, single-base mismatched target DNA could be separated from perfectly complementary target DNA. In addition, the photoluminescence (PL) signals of perfectly complementary target DNA and single-base mismatched DNA as well as the hybridization kinetics of different concentrations of target DNA at different reaction times have also been studied. Most importantly, the detection, enrichment, and separation ability of AFMN was further verified with milk. Simple and satisfactory results were obtained, which show the great potential in the fields of mutation identification and clinical diagnosis.     

Molecular topology analysis of the differences between drugs, clinical candidate compounds, and bioactive molecules

A new method to decompose molecules is proposed and used to analyze drugs, clinical candidate compounds and bioactive molecules. The method classifies a set of molecules into a few well-defined classes based on their molecular framework. It is then possible to use these classes to investigate differences between drugs, clinical candidates and bioactive molecules. The analysis shows that in comparison with clinical candidates and bioactive compounds, drugs have a higher fraction of compounds with only one ring system. This conclusion is still valid after correcting for lipophilicity (ClogP) and molecular size, as well as any potential protein target bias in the data sets. Furthermore the molecular bridge part of compounds in the drug set has on average fewer ring systems than molecules from the other sets. The ring system complexity (RSC) was also investigated and for most topological classes drugs have a lower RSC than the clinical candidates and bioactive molecules. Hence, this study highlights differences in topology between drugs, clinical candidate compounds and bioactive molecules.     

1,l,l-三-(对硝基苯基氧甲基)丙烷的合成及晶体结构

采用1,1,1-三(羟甲基)丙烷与苯磺酰氯反应,得到中间产物1,1,1-三(苯磺酰基氧甲基)丙烷,然后在碱性条件下与对硝基酚反应,生成了目标化合物。本文使用红外光谱、1HNMR和单晶X射线衍射分析等方法对中间产物及目标化合物进行了表征,晶体结构分析表明目标化合物属于三斜晶系,P-1空间群,晶胞参数为:a=0.78731(11),b=1.25683(18),c=1.31155(18)nm,α=97.554(6),β=103.184(5),γ=102.840(6)°,V=1.2091(32)nm3,Z=2,Dc=1.366g/cm3,Mr=497.45,R1=0.0512,wR2=0.1600。化合物分子通过氢键、π-π堆积等弱相互作用形成了一种2D超分子层状结构。     

Proton microbeams,their production and use

Well focused beams of protons and other ions provide a very powerful means of determining how the elemental composition of a sample varies over its surface. Observation of the X-rays from proton bombardment can provide great sensitivity in most cases, while detection of nuclear effects has special applicability for elements of low atomic weight. A focusing system using high precision magnetic quadrupoles was designed and built for use with the IBIS 3 MeV Van de Graaff generator. Measurements of the first order focusing and aberrations agreed satisfactorily with theoretical predictions. The focused beam of 3 MeV protons was measured to have a diameter of less than 4 μm. The target chamber, deflection system and display system are described and examples given of use of the system. Backgrounds in X-ray detection are discussed and limits of detection are given.