How electrolyte and polyelectrolyte affect the adsorption of the anionic surfactant SDS onto the surface of a cellulose thin film and the structure of the cellulose film. 1. Hydrophobic cellulose

The nature of hydrophobic thin cellulose films, formed by Langmuir-Blodgett (LB) deposition on silica, has been studied using neutron reflectivity (NR). The impact of electrolyte and a polyelectrolyte, poly(dimethyldiallylammonium chloride) (polydmdaac), on the adsorption of the anionic surfactant sodium dodecyl sulfate (SDS) onto the surface of the hydrophobic cellulose film and upon the structure of the cellulose film has been investigated. The results show how a combination of polyelectrolytes and electrolyte can be used to manipulate surfactant adsorption onto hydrophobic cellulose surfaces and modify the structure of the cellulose film by swelling and penetration. The results illustrate how polyelectrolytes can be used to reverse adsorption and swelling of cellulose films which are not reversible simply by dilution in solvent.     

Manipulation of the adsorption of ionic surfactants onto hydrophilic silica using polyelectrolytes

This paper demonstrates the use of polyelectrolytes to modify and manipulate the adsorption of ionic surfactants onto the hydrophilic surface of silica. We have demonstrated that the cationic polyelectrolyte poly(dimethyl diallylammonium chloride), poly-dmdaac, modifies the adsorption of cationic and anionic surfactants to the hydrophilic surface of silica. A thin robust polymer layer is adsorbed from a dilute polymer/surfactant solution. The resulting surface layer is cationic and changes the relative affinity of the cationic surfactant hexadecyl trimethylammonium bromide, C16TAB, and the anionic surfactant sodium dodecyl sulfate, SDS, to adsorb. The adsorption of C16TAB is dramatically reduced. In contrast, strong adsorption of SDS was observed, in situations where SDS would normally have a low affinity for the surface of silica. We have further shown that subsequent adsorption of the anionic polyelectrolyte sodium poly(styrene sulfonate), Na-PSS, onto the poly-dmdaac coated surface results in a change back to an anionic surface and a further change in the relative affinities of the cationic and anionic surfactants for the surface. The relative amounts of C16TAB and SDS adsorption depend on the coverage of the polyelectrolyte, and these preliminary measurements show that this can be manipulated.     

Modifying the adsorption properties of anionic surfactants onto hydrophilic silica using the pH dependence of the polyelectrolytes PEI, ethoxylated PEI, and polyamines

The manipulation of the adsorption of the anionic surfactant, sodium dodecyl sulfate, SDS, onto hydrophilic silica by the polyelectrolytes, polyethyleneimine, PEI, ethoxylated PEI, and the polyamine, pentaethylenehexamine, has been studied using neutron reflectometry. The adsorption of a thin PEI layer onto hydrophilic silica promotes a strong reversible adsorption of the SDS through surface charge reversal induced by the PEI at pH 7. At pH 2.4, a much thicker adsorbed PEI layer is partially swelled by the SDS, and the SDS adsorption is now no longer completely reversible. At pH 10, there is some penetration of SDS and solvent into a thin PEI layer, and the SDS adsorption is again not fully reversible. Ethoxylation of the PEI (PEI-EO(1) and PEI-EO(7)) results in a much weaker and fragile PEI and SDS adsorption at both pH 3 and pH 10, and both polymer and surfactant desorb at higher surfactant concentrations (>critical micellar concentration, cmc). For the polyamine, pentaethylenehexamine, adsorption of a layer of intermediate thickness is observed at pH 10, but at pH 3, no polyamine adsorption is evident; and at both pH 3 and pH 10, no SDS adsorption is observed. The results presented here show that, for the amine-based polyelectrolytes, polymer architecture, molecular weight, and pH can be used to manipulate the surface affinity for anionic surfactant (SDS) adsorption onto polyelectrolyte-coated hydrophilic silica surfaces.     

Interaction of the anionic surfactant SDS with a cellulose thin film and the role of electrolyte and poyelectrolyte. 2 Hydrophilic cellulose

The interaction of the anionic surfactant, sodium dodecylsulfate (SDS), with the hydrophilic surface of a thin cellulose film and the role of electrolyte (0.1 M NaCl) and the polyelectrolyte, poly(dimethyldiallyl ammonium chloride) [polydmdaac], have been studied by neutron reflectivity (NR). The thin cellulose films were prepared by Langmuir-Blodgett (LB) deposition of trimethylsilyl-cellulose (TMSC) on silicon, and the hydrophilic surface was produced by the cleaving of the terminal methyl groups of the TMSC by HCl vapor. Despite both the surfactant and cellulose surfaces being nominally anionic, SDS adsorption and swelling of the cellulose film occurred during adsorption. The results show that the nature of the adsorption and the extent of the penetration into the cellulose film can be controlled by the addition of electrolyte, NaCl, and cationic polyelectrolyte, polydmdaac.     

A comparative study of surfactant adsorption on model surfaces using the quartz crystal microbalance and the ellipsometer

The nature of hexaethylene glycol mono-n-tetradecyl ether (C(14)EO(6)) layers adsorbed onto different model surfaces was systematically investigated by means of QCM-D (quartz crystal microbalance-dissipation) and ellipsometry. The amount of non-ionic surfactant adsorbed is determined both at hydrophilic and hydrophobic surfaces. In particular, the substrates employed were hydrophilic silica, hydrophobized silica (using dimethyldichlorosilane), and hydrophobized gold surfaces (using 10-thiodecane and 16-thiohexadecane). It was shown that the frequency shift obtained from the QCM-D experiments results in an overestimation of the adsorbed mass. This is attributed to two different effects, viz. water that is coupled to the adsorbed layer due to hydration of the polar region of the surfactant and second water that for other reasons is trapped within the adsorbed layer. Furthermore, from the ellipsometry data the adsorbed layer thickness is determined. By combining the thickness information and the dissipation parameter (obtained from the QCM-D experiments), we note that the dissipation parameter is insufficient in describing the viscoelastic character of thin surfactant films.     

Adsorption of pure and mixed solvent solutions of spin probes onto stationary phases

Water, methanol (MeOH), acetonitrile (ACN), and binary MeOH-water and ACN-water solutions of different spin probes (nitroxides), selected to mimic the behavior of different pollutants, were adsorbed onto stationary phases usually used in reversed-phase high-performance liquid chromatography (RP-HPLC). These stationary phases are constituted by porous silica and differ from each other regarding the surface area, the pore size, the particle size, the surface functions (NH2, C8, and C18), and the percentage of functionalization. The electron paramagnetic resonance (EPR) spectra of the probe solutions adsorbed into the pores were analyzed by computer-aided computation of the spectral line shape, which provided structural and dynamical parameters of the probes and their environments. These parameters provided information on the surface properties of the stationary phases, such as alkyl chain density, solvent penetration, stationary-phase ordering, and residual silanol effects, which modify the retention times in HPLC. A different availability of polar surface groups in the pure and mixed solvents was found for the different stationary phases depending on (1) the different functionalization degree, (2) the surface-chain length, (3) the particle size, and (4) the polarity of both the probe and the solvent. The C8 functionalization rendered the surface more hydrophobic with respect to C18. The endcapping process of the residual silanols strongly enhanced the surface hydrophobicity tested by the probes. At the highest water content, the adsorption of the polar or charged probes onto the hydrophobic surface is the lowest and self-aggregation occurs. When the probes bear both hydrophilic and hydrophobic moieties, the adsorption is enhanced by a synergy between hydrophilic and hydrophobic bonds with the surface. A balance between the hydrophilic and hydrophobic forces leads to high adsorption and partial insertion of the surfactant probes in an ordered C18 chain layer at the solid surface which forms in the binary mixtures; this layer is ascertained between 40% and 70% of the less hydrophilic solvent, depending on the type of both the solid and the probe. This insertion and the response on the formation of the ordered layer were favored in ACN-water with respect to MeOH-water.     

Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.     

Viscosity behavior of silica suspensions flocculated by associating polymers

Associating polymers are hydrophilic long-chain molecules containing a small number of hydrophobic groups, and act as flocculants in aqueous suspensions. The effects of associating and nonassociating polymers on viscosity behavior are studied for silica suspensions. Since flocculation is induced by polymer bridging, the viscosity behavior is converted from Newtonian to shear-thinning profiles. The additions of surfactant cause an increase in viscosity for suspensions prepared with associating polymer, whereas the flow behavior of suspensions with nonassociating polymer is not significantly influenced. In adsorption of associating polymers onto silica particles, the chain may adopt a conformation with a water-soluble backbone attached to the particle surfaces. The hydrophobic groups extending from the chains adsorbed onto different particles can form a micelle by association with surfactant. Therefore, the bridging flocculation is enhanced by surfactant. The cooperative micellar formation between associating polymer and surfactant is responsible for viscosity increase in suspensions.     

Thin wetting films from aqueous solutions of surfactants and phospholipid dispersions

The microscopic thin wetting film method was used to study the stability of wetting films from aqueous solution of surfactants and phospholipid dispersions on a solid surface. In the case of tetradecyltrimethylammonium bromide (C(14)TAB) films the experimental data for the receding contact angle, film lifetime, surface potential at the vapor/solution and solution/silica interface were used to analyze the stability of the studied films. It is shown that with increasing C(14)TAB concentration charge reversal occurs at both (vapor/solution and solution/silica) interfaces, which affects the thin-film stability. The spontaneous rupture of the thin aqueous film was interpreted in terms of the earlier proposed heterocoagulation mechanism. The presence of the mixed cationic/anionic surfactants was found to lower contact angles and suppresses the thin aqueous film rupture, thus inducing longer film lifetime, as compared to the pure amine system. In the case of mixed surfactants hetero-coagulation could arise through the formation of ionic surfactant complexes. The influence of the melting phase-transition temperature T(c) of the dimyristoylphosphatiddylcholine (DMPC) on the stability of thin films from dispersions of DMPC small unilamellar vesicles on a silica surface was studied by measuring the film lifetime and the TPC expansion rate. The stability of thin wetting films formed from dispersions of DMPC small unilamellar vesicles was investigated by the microinterferometric method. The formation of wetting films from diluted dispersions of DMPC multilamellar vesicles was studied in the temperature range 25-32 degrees C. The stability of thin film of lipid vesicles was explained on the basis of hydrophobic interactions. The results obtained show that the stability of wetting films from aqueous solutions of single cationic and mixed cationic-anionic surfactants has electrostatic origin, whereas the stability of the phospholipid film is due to hydrophobic interaction.     

Monte Carlo study of surfactant adsorption on heterogeneous solid surfaces

The equilibrium between free surfactant molecules in aqueous solution and adsorbed layers on structured solid surfaces is investigated by lattice Monte Carlo simulation. The solid surfaces are composed of hydrophilic and hydrophobic surface regions. The structures of the surfactant adsorbate above isolated surface domains and domains arranged in a checkerboard-like pattern are characterized. At the domain boundary, the adsorption layers display a different behavior for hydrophilic and hydrophobic surface domains. For the checkerboard-like surfaces, additional adsorption takes place at the boundaries between surface domains.     

Cooperativity in the adsorption of cellulose ethers and fibrinogen at liquid-solid interfaces

The possibility of reducing fibrinogen adsorption to solid surfaces by competitive adsorption of cellulose ethers (EHEC, HEC) was investigated. The surface concentration of fibrinogen adsorbed onto hydrophilic and hydrophobic (methylized) glass was measured with an enzyme-linked immunosorbent assay. The immunoassay was calibrated by ellipsometry, using the initial mass transport limitation of adsorption for calculations of the maximum amount of adsorbed protein.At a hydrophobic surface, the presence of cellulose polymers caused a decrease of the adsorption of fibrinogen. The hydrophobic EHEC (cloud point 35°C) was most efficient and abolished surface-adsorption of the protein.At a hydrophilic surface, positive cooperativity was seen between fibrinogen and cellulose polymers. The hydrophilic HEC (cloud point >100°C) gave the most prominent effect.The results indicate that the affinity between a water soluble polymer or protein and a solid surface is not the only factor determining surface adsorption. The finding that there may be both positive and negative cooperativity in the adsorption of polymers shows the importance of polymer compatibility in layers of adsorbed polymers.     

The influence of mixed cationic–anionic surfactants on the three-phase contact parameters in silica–solution systems

The formation of thin wetting films on silica surface from aqueous solution of (a) tetradecyltrimetilammonium bromide (C₁₄TAB) and (b) surfactant mixture of the cationic C₁₄TAB with the anionic sodium alkyl- (straight chain C₁₂–, C₁₄– and C₁₆–) sulfonates, was studied using the microscopic thin wetting film method developed by Platikanov. Film lifetimes, three-phase contact (TPC) expansion rates, receding contact angles and surface tension were measured. It was found that the mixed surfactants caused lower contact angles, lower rates of the thin aqueous film rupture and longer film lifetimes, as compared to the pure C₁₄TAB. This behavior was explained by the strong initial adsorption of interfacial complexes from the mixed surfactant system at the air/solution interface, followed by adsorption at the silica interface. The formation of the interfacial complexes at the air/solution interface was proved by means of the surface tension data. It was also shown, that the chain length compatibility between the anionic and cationic surfactants controls the strength of the interfacial complex and causes synergistic lowering in the surface tension. The film rupture mechanism was explained by the heterocoagulation mechanism between the positively charged air/solution interface and the solution/silica interface, which remained negatively charged.     

Morphology and mechanical properties of surfactant aggregates at water-silica interfaces: molecular dynamics simulations

Dilute and concentrated surfactant systems at the solid-liquid interface are examined using classical molecular dynamics simulations. Particular emphasis is placed on understanding how surfactants aggregate and form the micellar structure, how micelles change shape at high concentrations in aqueous media and in the presence of hydrophilic surfaces, and at what force this micellar structure breaks apart during indentation of micelle-covered surfaces with a proximal probe microscope tip. The specific system of interest is C12TAB (n-dodecyltrimethylammonium bromide) surfactant in an aqueous medium that is modeled with empirical potentials. The simulations predict that the micelle structure in water is compact and either spherical or elliptical in shape. In the presence of a hydrophilic surface of silica, the structure evolves into a flat elliptical shape, in agreement with experimental findings. The simulated indentation of the micelle/silica system causes the micelle to break apart at an indentation force of about 1 nN and form a surfactant monolayer. The predicted force curve is in excellent agreement with experimental measurements.     

Surfacial,liquid sorption and monolayer-forming properties of hydrophilic and hydrophobic Stöber silica particles

The surface of silica spheres with a diameter of 500 nm was modified with ethoxysilane. Hydrophilic and partially hydrophobic silica spheres were obtained, suitable for the preparation of two-dimensional monoparticle films at the liquid-air interface. The tendency of these particles to self-assemble is basically dependent on surface hydrophobicity. Liquid sorption excess isotherms were studied in ethanol-cyclohexane and ethanol-chloroform mixtures with the aim of characterizing the adsorption capacity of the particles. Specific surface area and porosity were measured by nitrogen adsorption. The specific surface area determined by liquid sorption was considerably larger than determined by gas adsorption. This is ascribed to penetration of ethanol into the pores and the swelling of the silica particles in ethanol. Surface modification of hydrophilic particles changed the film-forming properties of the particles. The compressibility and the lift-off area of the monolayer films of hydrophobic particles on water were higher than for the films of hydrophilic particles.     

表面活性剂对污泥脱水性能影响的机理研究:Gemini表面活性剂与聚电解质相互作用的分子动力学模拟

表面活性剂可以与污泥表面的胞外聚合物(EPS)吸附形成胶束,释放出自由水和结合水,从而达到改善污泥脱水性能的目的.本文采用粗粒化的分子动力学模拟方法,研究了Gemini表面活性剂与EPS形成复合物的过程和结构.聚电解质链的亲疏水性对吸附过程有显著影响,亲水聚电解质链与Gemini表面活性剂吸附的主要驱动力为静电吸引,Gemini表面活性剂头基吸附在链上,尾链朝向溶剂;疏水聚电解质链与Gemini表面活性剂吸附过程由静电作用与疏水作用共同促进,Gemini表面活性剂以平行于聚电解质链的构型存在.Gemini表面活性剂联结基团长度对吸附过程的影响甚微;聚电解质链的电荷密度对亲水聚电解质链的吸附产生协同作用,对疏水聚电解质链的吸附不产生作用.     

Probing the impact of advanced melting and advanced adsorption phenomena on the accuracy of pore size distributions from cryoporometry and adsorption using NMR relaxometry and diffusometry

The penetration of compressed CO(2) in hydrocarbon and fluorocarbon regions of concentrated surfactant mesophases are interpreted from differences in the CO(2)-processed pore expansion of mesoporous silica thin films templated by three surfactants containing varying degrees of hydrocarbon and fluorocarbon functionality. Ordered silica thin films are synthesized for the first time using the 16-carbon (C(16)) partly fluorinated surfactant, 11,11,12,12,13,13,14,14,15,15,16,16,16-tridecafluorocetyl pyridinium bromide (HFCPB), as a templating agent. Silica films templated with surfactants containing a 8-carbon (C(8)) fluorocarbon tail (3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl pyridinium chloride (HFOPC)) and a 16-carbon (C(16)) hydrocarbon tail (cetyl pyridinium bromide (CPB)) and HFCPB (C(16)) are processed in compressed CO(2) (69-172 bar, 25 °C and 45 °C) during synthesis. CO(2) processing results in significant pore expansion for films templated with both fluorinated surfactants, while pore expansion is negligible for the hydrocarbon templated material suggesting that preferential CO(2) penetration occurs in the 'CO(2)-philic' fluorocarbon segments of the surfactant template. The effect of substrate surface energy on the final uniformity of the dip-coated films is studied by varying the substrate from unmodified glass to a fluorocarbon-capped substrate. The ability to create dip-coated thin films on low surface energy substrates through favorable interaction of surfactant template tail with the substrate surface functional groups is demonstrated.     

Adsorption of organic compounds onto polyelectrolyte immobilized-surfactant aggregates on cellulosic fibers

The adsorption of anionic surfactants with different hydrophobic chain lengths onto cellulose fibers pretreated with a cationic polyelectrolyte has been investigated. Five steps are involved in the adsorption process, which was ascribed to the formation of monolayer and bilayer surfactant aggregates. Electrostatic interaction between the residual surface charges followed by hydrophobic interaction among the alkyl chains are considered the main factors in the adsorption process. The adsorption of the anionic surfactant was found to greatly enhance the retention of organic compounds onto the polyelectrolyte-treated cellulose. The coadsorption phenomenon, which was dependent on the saturation level of the adsorbed surfactant, has been explained in terms of the accumulation of the organic solute on the hydrophobic core generated by the adsorbed layer.     

Adsorption Behavior of Lysozyme and Tween 80 at Hydrophilic and Hydrophobic Silica–Water Interfaces

Nonionic surfactants such as Tween 80 are used commercially to minimize protein loss through adsorption and aggregation and preserve native structure and activity. However, the specific mechanisms underlying Tween action in this context are not well understood. Here, we describe the interaction of the well-characterized, globular protein lysozyme with Tween 80 at solid–water interfaces. Hydrophilic and silanized, hydrophobic silica surfaces were used as substrates for protein and surfactant adsorption, which was monitored in situ, with ellipsometry. The method of lysozyme and Tween introduction to the surfaces was varied in order to identify the separate roles of protein, surfactant, and the protein–surfactant complex in the observed interfacial behavior. At the hydrophobic surface, the presence of Tween in the protein solution resulted in a reduction in amount of protein adsorbed, while lysozyme adsorption at the hydrophilic surface was entirely unaffected by the presence of Tween. In addition, while a Tween pre-coat prevented lysozyme adsorption on the hydrophobic surface, such a pre-coat was completely ineffective in reducing adsorption on the hydrophilic surface. These observations were attributed to surface-dependent differences in Tween binding strength and emphasize the importance of the direct interaction between surfactant and solid surface relative to surfactant–protein association in solution in the modulation of protein adsorption by Tween 80.     

Adsorption of DNA and dodecyl trimethylammonium bromide mixtures at the air/water interface: a neutron reflectometry study

The interactions between dodecyl trimethylammonium bromide (C12TAB) and two samples of DNA with widely differing molecular weights have been studied using surface tension and neutron reflectometry. Neutron reflection data show that the surfactant and polymer are adsorbed together in a highly cooperative fashion over a 1000-fold change in surfactant concentration. Furthermore, the shorter DNA fragments adsorb with C12TAB as trilayers at higher surfactant concentrations, with overall layer thicknesses of 65-70 A. The high molecular weight DNA, however, shows only approximate monolayer adsorption with thicknesses varying from 19 to 26 A over the entire range of C12TAB concentrations. The difference in behavior between the different samples is believed to be a result of the rigid double helical structure of DNA which makes the formation of bulk phase polymer/micelle aggregates much less favorable for the short fragments. The resulting increase in the critical aggregation concentration (CAC) then leads to the adsorption of additional surfactant/polymer complex to the underside of the initial stable surface active DNA/C12TAB complex. Comparison with previous results obtained for synthetic polyelectrolytes shows that DNA/C12TAB complexes are not capable of reducing the surface tensions to the extent that other mixtures such as the poly(styrene sulfonate)/C12TAB mixtures do. A possible reason for this is the high rigidity of DNA combined with the fact that its hydrophobic moieties are positioned within the double helix so that the external molecule is largely hydrophilic.     

Adsorption of cationic starch on cellulose studied by QCM-D

The adsorption of cationic starch (CS) from aqueous electrolyte solutions onto model cellulose film has been investigated by the quartz crystal microbalance with dissipation monitoring (QCM-D) and X-ray photoelectron spectroscopy (XPS). The influence of the electrolyte composition and charge density of CS was examined. The adsorption of CS onto cellulose followed the general trends expected for polyelectrolyte adsorption on oppositely charged surfaces, with some exceptions. Thus, as result of the very low surface charge density of the cellulose surface, highly charged CS did not adsorb in a flat conformation even at low ionic strength. The porosity of the film, however, enabled the penetration of coiled CS molecules into the film at high electrolyte concentrations. Differences between the adsorption behavior of CS on cellulose and earlier observations of the adsorption of the same starches on silica could be explained by the different morphologies and acidities of the hydroxyl groups on the two surfaces.