Role of novel oxazocine derivative as corrosion inhibitor for 304 stainless steel in acidic chloride pickling solutions

Inhibition of 304 stainless steel corrosion in acidic chloride pickling (1.0 M HCl) solutions by newly synthesized oxazocine derivative 4 as a corrosion inhibitor have been studied using weight loss, potentiodynamic polarization, and atomic absorption spectroscopy investigations. Potentiodynamic polarization curves show that the inhibitor behaves as a mixed-type. The adsorption of the inhibitor on the metal surface in the acid solution was found to obey Langmuir’s adsorption isotherm. The inhibition mechanism of the investigated inhibitor was discussed in terms of its adsorption on the metal surface. The relationship between the molecular structure and the inhibition efficiency was elucidated by quantum chemical calculations.     

Surface characterization and electrochemical corrosion behaviour of 304 stainless steel in aqueous media

A formulation consisting 100 ppm of 3-phosphonopropionic acid, 50 ppm of Zn²⁺ and 150 ppm of Tween 80 (polyoxyethylene sorbitan monooleate) offered 97.4% inhibition to the corrosion of 304 austenitic stainless steel immersed in a groundwater environment. This formulation functioned as a mixed inhibitor. The protective film was analysed by luminescence, XRD and FTIR spectra and pit morphology and was also observed by scanning electron microscopy. Electronic Publication     

Alcoholic Mentha extracts as inhibitors of low-carbon steel corrosion in aqueous medium

This paper presents experimental evidence of the ability of alcoholic Mentha extracts to inhibit the corrosion of low-carbon steel in aqueous acid solutions. Alcoholic extracts of Mentha spicata L., Mentha x gentilis L., Mentha crispa L., Mentha piperita L., and Mentha x piperita L. were tested. The corrosion inhibition capability of these extracts was confirmed by means of weight loss experiments, cyclic voltammetry, chronoamperometry, polarization curves, and electrochemical impedance spectroscopy.     

Allylacetylenes and their derivatives as inhibitors of steel corrosion in sulfuric acid

New functionalized derivatives of allylacetylenes were prepared, and their ability to inhibit corrosion of St.3 low-carbon steel in 5 N sulfuric acid was studied. The effectiveness of inhibition of steel corrosion was studied in relation to the structure of acetylene derivatives, their concentration, and temperature of acidic medium.     

Theoretical studies of some sulphonamides as corrosion inhibitors for mild steel in acidic medium

Density functional theory (DFT) at the B3LYP/6‐31G (d,p) and BP86/CEP‐31G* basis set levels and ab initio calculations using the RHF/6‐31G (d,p) methods were performed on four sulfonamides (namely sulfaacetamide (SAM), sulfapyridine (SPY), sulfamerazine (SMR), and sulfathiazole (STI)) used as corrosion inhibitors for mild steel in acidic medium to determine the relationship between molecular structure and their inhibition efficiencies (%IE). The order of inhibition efficiency obtained was SMR > SPY > STI > SAM which corresponded with the order of most of the calculated quantum chemical parameters namely E_HOMO (highest occupied molecular orbital energy), E_LUMO (lowest unoccupied molecular orbital energy), the energy gap (ΔE), the Mulliken charges on the C, O, N, S atoms, hardness (η), softness (S), polarizability (α), dipole moment (μ), total energy change (ΔE_T), electrophilicity (ω), electron affinity (A), ionization potential (I), the absolute electronegativity (χ), and the fraction of electrons transferred (ΔN). Quantitative structure activity relationship (QSAR) approach has been used and a correlation of the composite index of some of the quantum chemical parameters was performed to characterize the inhibition performance of the sulfonamides studied. The results showed that the %IE of the sulfonamides was closely related to some of the quantum chemical parameters but with varying degrees/order. The calculated %IE of the sulfonamides studied was found to be close to their experimental corrosion inhibition efficiencies. The experimental data obtained fits the Langmuir adsorption isotherm. The negative sign of the E_HOMO values and other thermodynamic parameters obtained indicates that the data obtained supports physical adsorption mechanism. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Some new bipyrazole derivatives as corrosion inhibitors for C38 steel in acidic medium

Three new bipyrazole derivatives, ethyl 5,5′-dimethyl-1′H-1,3′-bipyrazole-4-carboxylate (Bip1), 1,1′,5,5′-tetramethyl-1H,1′H-3,3′-bipyrazole (Bip2), and 3-(bromomethyl)-5,5′-dimethyl-1′H-1,3′-bipyrazole (Bip3), have been synthesized and used as additives to protect C38 steel from corrosion in aerated 1 M HCl solution, using the various corrosion monitoring techniques such as weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy. All the techniques used for the studies show an increase in inhibition efficiency and decrease in the corrosion rate by increasing the inhibitor concentration. Impedance measurements showed that the double layer capacitance decreased and charge transfer resistance increased with increase in the inhibitors concentration, and hence an increase in inhibition efficiency. A potentiodynamic polarization study showed that all the inhibitors act as mixed-type. The adsorption of bipyrazole derivatives is found to obey the Langmuir adsorption isotherm, and the thermodynamic parameters were determined and are discussed.     

Antihypertensive drugs as an inhibitors for corrosion of aluminum and aluminum silicon alloys in aqueous solutions

The corrosion behavior of aluminum and three aluminum–silicon alloys in different concentrations of HCl solutions and its inhibition by antihypertensive drugs was studied using potentiostatic polarization measurements. As the acid concentration increases, the rate of corrosion increases. Aluminum is less susceptible to corrosion than any of Al–Si alloys. The inhibition efficiency of the drug compounds increases with their concentration up to a critical value. At higher additive concentrations the inhibition efficiency starts to decrease. The inhibitive action of these compounds is due to their formation of insoluble complex adsorbed on the metal surface. The adsorption follows Langmuir adsorption isotherms. It was found that the drugs compounds provide protection to Al and Al–Si alloys against pitting corrosion by shifting the pitting potential to more positive direction until critical drug concentrations (250 ppm). After this critical concentration the inhibition against to pitting corrosion starts to decrease.     

Quantum chemical studies on some thiadiazolines as corrosion inhibitors for mild steel in acidic medium

Density functional theory at the B3LYP/6-31G(d,p) basis set level was performed on three thiadiazolines, namely 4-chloro-N-(5-phenyl-1,3,4-thiadiazol-2(3H)-ylidene)aniline (TD01), 4-chloro-N-(5-(4-methoxyphenyl)-1,3,4-thiadiazol-2(3H)-ylidene)aniline (TD02), and 2-(5-(4-chlorophenylimino)-4,5-dihydro-1,3,4-thiadiazol-2-yl) phenol (TD03), and the inhibitive effect of these thiadiazolines against the corrosion of mild steel in acidic medium is elucidated. The calculated quantum chemical parameters correlated to the inhibition efficiency are E_HOMO (highest occupied molecular orbital energy), E_LUMO (lowest unoccupied molecular orbital energy), the energy gap (ΔE) hardness (η), softness (S), dipole moment (μ), electron affinity (EA) ionization potential (IE), the absolute electro negativity (χ), and the fraction of electron transferred (ΔN). The decreasing order of %IE of the thiadiazolines studied was found to be in agreement with experimental corrosion inhibition efficiencies. The local reactivity has been analyzed through the condensed Fukui function and local softness indices using population analysis.     

Poly(3-octylthiophene) and polystyrene blends thermally treated as coatings for corrosion protection of stainless steel 304

The effect of thermal annealing of poly(3-octylthiophene) (P3OT) and polystyrene (PS) blend coatings on the corrosion inhibition of stainless steel in a 0.5 M NaCl solution was investigated. P3OT was synthesized by direct oxidation of the 3-octylthiophene monomer with ferric chloride (FeCl₃) as oxidant. Stainless steel electrodes with mirror finish were coated with P3OT/PS blend by drop-casting technique. In order to study the temperature effect on the function like physical barrier against the corrosive species of P3OT/PS polymeric blend, the coatings were thermally annealed at three different temperatures (55?°C, 80?°C, and 100?°C). The corrosion behavior of P3OT/PS-coated stainless steel was investigated in 0.5 M NaCl at room temperature, by using potentiodynamic polarization curves, linear polarization resistance (LPR), and electrochemical impedance spectroscopy. The LPR values indicated that, at 100?°C, P3OT/PS coatings showed a better protection of the 304 stainless steel in 0.5 M NaCl; the corrosion rate diminished in two orders of magnitude with regard to the bare stainless steel. The superficial morphology of the coatings before and after the corrosive environment was researched by atomic force microscopy, optic microscopy, and scanning electronic microscopy. Morphological study showed that the increased temperature benefited the integration of the two polymeric phases, which improved the barrier properties of the coatings. The coating/metal adhesion and the coating thickness were evaluated. The temperature increases the adhesion degree coating/substrate; thus, the coating annealed at 100?°C showed the best adhesion.     

Effect of inhibitors on carbon steel corrosion in foaming solutions

The corrosion behavior of carbon steel in PO-6TS-M foaming solution was studied. Several kinds of inhibiting additives were tested for their ability to reduce the corrosion rate of steel. The antipyrene additive to the foaming solution was shown to be the most effective in reducing corrosion rate of carbon steel. The optimum concentration of the inhibitor additive was determined.     

Azorhodanine derivatives as inhibitors for acidic corrosion of nickel

Azorhodanine derivatives (HL1-HL5) were tested as corrosion inhibitors for nickel in 2M HNO3 solution using weight loss and galvanostatic polarization techniques. The results showed that these derivatives act as inhibitors for nickel in this medium. The inhibition was assumed to occur via adsorption of the inhibitor molecule on the metal surface. Polarization measurements indicated that these compounds act as mixed-type inhibitors, but the cathode is more polarized when an external current was applied. This means that these compounds retard the rate of hydrogen evolution and the rate of dissolution of the metal. Results showed that azorhodanine derivatives are adsorbed on the nickel surface following Temkin's adsorption isotherm. The activation energy and thermodynamic parameters were calculated and discussed at different temperatures (30-45 degrees C).     

Synthesis and evaluation of some new hydrazones as corrosion inhibitors for mild steel in acidic media

Research on Chemical Intermediates - Mild steel corrosion in HCl solution is an example of corrosion in acidic mediums. The ongoing research efforts to develop novel environmentally friendly...     

Development of pitting corrosion of stainless steel 403 in sodium chloride solutions

Pitting corrosion of stainless steel 403 in the NaCl solutions is studied. It is shown that the experimental results obtained under the potentiostatic conditions do not provide sufficient information on the behavior of steel under the conditions of free corrosion. The corrosion experiments take long time, their results exhibit poor reproducibility; however, they are necessary for obtaining reliable data on the corrosion behavior of steel. The development of corrosion process is reflected in the variation of corrosion potential with time. The effect of concentration and temperature of NaCl solutions on the development of pitting corrosion is studied. The peculiarities of the distribution of pits over the test specimen surface are revealed. In 1 M NaCl solution at 20°C, few pits arise. Some of them repassivate; some pits grow, initially, in diameter and depth and, then, almost only in depth. The examples of through pit formation on the specimens 4 mm thick are presented.     

Synthesis of some thiophene derivatives

The synthesis of thiopene derivatives from diacetylenic hydrocarbons has been described [1]. We have examined for the first time the reaction of diacetylenic diesters with hydrogen sulfide and with NaHS. The diacetylenic diesters react readily with hydrogen sulfide or NaHS in acetone at pH 9–10 to give 2,5-disubstituted thiopheries (see Table 1).Translated from Khimiya Geterotsiklicheskikh Soedinenii, Vol. 6, No. 5, pp. 713–714, May, 1970.     

Influence of some thiophene derivatives on the corrosion of iron in nitric acid solution

Corrosion of iron in 2MHNO₃ has been studied by the electrochemical polarization and weight loss measurements. The effect of some thiophene derivatives has been investigated. The results show that the inhibitors under consideration, influencing both the cathodic and anodic process, are adsorbed on the metal surface in molecular form. They do not change the mechanism of the reaction between iron and nitric acid, but decrease its rate. This effect is controlled by the values of their dipole moments. The weight loss technique also gave the same order of inhibition efficiency of the tested inhibitors.

---

Der Einflu einiger Thiophen-Derivate auf die Korrosion von Eisen in salpetersauren Lösungen

Zusammenfassung Es wurde die Korrosion von Eisen in 2M HNO₃ mittels Messungen der elektrochemischen Polarisation und des Gewichtsverlustes untersucht. Dabei wurde der Einfluß einiger Thiophenderivate überprüft. Die Ergebnisse zeigen, daß die Inhibitoren, die den kathodischen und den anodischen Prozeß beeinflussen, an der Metalloberfläche in molekularer Form adsorbiert werden. Dabei wird der Reaktionsmechanismus der Reaktion zwischen Eisen und Salpetersäure nicht geändert, es wird jedoch die Geschwindigkeit herabgesetzt. Dieser Effekt ist mit den Dipolmomenten korrelierbar. Die Gewichtsverlustmessungen ergaben übereinstimmende Resultate.

     

Synthesis and biological evaluation of thiophene derivatives as acetylcholinesterase inhibitors

A series of new thiophene derivatives has been synthesized using the Gewald protocol. The acetylcholinesterase inhibition activity was assayed according to Ellman's method using donepezil as reference. Some of the compounds were found to be more potent inhibitors than the reference. 2-(2-(4-(4-Methoxyphenyl)piperazin-1-yl)acetamido)-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carboxamide (IIId) showed 60% inhibition, compared to only 40% inhibition by donepezil.     

Synthesis and evaluation of isatin derivatives as corrosion inhibitors for Q235A steel in highly concentrated HCl

A series of inhibitors—isatin derivatives aimed at anticorrosion of Q235A steel—was synthesized. The molecule structures were analyzed by NMR and MS. The inhibition on the corrosion in a concentrated HCl solution as high as 3 M was studied by weight loss, molecular simulation, and potentiodynamic polarization. The results indicate that isatin derivatives act as mixed type (cathodic/anodic) inhibitors. Several compounds were investigated in the formulations, during which compound 6 shows 95.5 % inhibition efficiency under the concentration of 100 mg/L accompanied by urotropine and 1,4-dihydroxy-2-butyne.     

Photochemical polymerization of thiophene derivatives in aqueous solution

A novel method of photochemical polymerization of thiophene derivatives in aqueous solution catalyzed by potassium dichromate and initiated by illumination is described.