Spectroscopic and electrochemical properties of thin solid films of yttrium bisphthalocyanine

Langmuir—Blodgett (LB) and evaporated thin solid films of the yytrium bisphthalocyanine complex (YPc₂) have been prepared on various substrates. Cyclic voltammograms of films are discussed and the electrochromic effect on LB films is reported. A detailed spectroscopic characterization of the YPc₂ material is given using resonance Raman scattering (RRS), surface-enhanced resonance Raman scattering (SERRS), transmission and reflection absorption FT-IR spectroscopy and UV—vis spectra. The spectroscopic characterization of the chemical and electrochemical oxidations products of YPc₂ films and solutions was carried out by in situ UV—vis spectroscopy. Potential applications are discussed.     

Surface-enhanced spectroscopy of Langmuir—Blodgett films of N-octyl,N′-isobutyl-3,4:9,10-perylene-bis(dicarboximide)

The infrared, resonant Raman and surface-enhanced resonant Raman spectra of N-octyl, N′-isobutyl-3,4:9,10-perylene-bis(dicarboximide) (PBDC) were obtained and the aggregation of PBDC molecules was studied using surface-enhanced fluorescence. Langmuir—Blodgett (LB) films of the neat dye as well as mixed layers with arachidic acid, were prepared and transferred to glass slides and surface-enhanced active surfaces for spectroscopic characterization. A strong red shifted excimer emission was characteristic of LB layers of the neat material and of the thin solid films formed by dipping a glass slide into a solution containing the dye and a volatile solvent. However, using mixed LB monolayers of PBDC and arachidic acid, the surface-enhanced fluorescence of the monomer was observed. The surface-enhanced scattering was measured for both neat and mixed LB layers.     

Single molecular detection of a perylene dye dispersed in a Langmuir-Blodgett fatty acid monolayer using surface-enhanced resonance Raman scattering

The Langmuir-Blodgett (LB) monolayer technique was used to fabricate single molecule LB monolayer containing bis(phenethylimido)perylene (PhPTCD), a red dye dispersed in arachidic acid (AA) with an average doping of 1 molecule per microm2. The monolayer was transferred onto Ag island films to obtain spatially resolved surface-enhanced resonance Raman scattering (SERRS) spectra. The mixed LB monolayers were fabricated with a concentration, on average, of 1, 6, 19 and 118 PhPTCD molecules per microm2 in AA. The AA provides a two-dimensional host matrix whose background signal does not interfere with the detection of the probe molecule's SERRS signal. The properties of the single molecule detection were investigated using micro-Raman with a 514.5-nm laser line. The Ag island surfaces coated with the LB monolayer were mapped with spatial steps of 3 microm and global chemical imaging of the most intense SERRS band in the spectrum was also recorded. The SERRS and surface-enhanced fluorescence (SEF) of the neat and single molecule LB monolayer were recorded in a temperature range from liquid nitrogen to + 200 degrees C. Neat PhPTCD LB monolayer spectra served as reference for the identification of characteristic signatures of the single molecule behavior. The spatial resolution of Raman-microscopy experiments, the multiplicative effect of resonance Raman and SERRS, and the high sensitivity of the new dispersive Raman instruments, allow SERRS to be part of the family of single molecular spectroscopies.     

Unimolecular rectification of monolayers of CH3C(O)S-C14H28Q(+)-3CNQ(-) and CH3C(O)S-C16H32Q(+)-3CNQ(-) organized by self-assembly, Langmuir-Blodgett, and Langmuir-Schaefer techniques

The advantage of "self-assembly" (strong covalent binding to substrates) was combined with the advantage of Langmuir-Blodgett (LB) or Langmuir-Schaefer (LS) transfer to a solid substrate (quantitative transfer of monolayers to the substrate). The electrical rectification (asymmetric conduction) by a monolayer of thioacetylalkylquinolinium tricyanoquinodimethanide was critically compared when these molecules had been transferred, by such competing techniques, onto gold electrodes, and then covered by a "cold gold" pad electrode. Unimolecular rectification was observed in the expected directions in the LB and LS monolayers. The Self-Assembled Monolayers (SAMs) were disordered; macroscopic measurements of rectification were unsuccessful for the SAMs, but successful for the down-stroke LB and LS monolayers, whose orientation and potential bonding to the Au surface should be identical to that of an ideal SAM.     

Fluorine containing poly(amide-imide)s: synthesis and formation of Langmuir-Blodgett monolayers

Soluble fluorine containing poly(amide-imide)s, PAI(1-4), were synthesized from diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimide-1,4-yl]hexafluoropropane with various diamines by direct polycondensation in N-methyl-2-pyrrolidone (NMP) containing CaCl₂ and using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide, dimethyl sulfoxide and tetrahydrofuran. Their Langmuir monolayers were studied at the air/water interface. The monolayers were generally stable at the water surface and could be reproducibly transferred onto solid substrates to build up Langmuir-Blodgett (LB) multilayers. The LB mono- and multilayers were characterized by ultra-violet/visible spectroscopy (UV-Vis), surface plasmon resonance, atomic force microscopy.     

Langmuir-Blodgett monolayers of long-chain NBD derivatives on silver island films: Well-organized probe layer for the metal-enhanced fluorescence studies

The metal-enhanced fluorescence (MEF) from the well-organized monolayers of two newly prepared long-chain alkylamine derivatives of nitrobenzoxadiazole (NBD-C16 and NBD-C18) deposited on silver island films (SIFs) has been investigated. The NBD derivatives were conveniently prepared by using a single step procedure in quantitative yields. The monolayers of the probes on SIFs as well as on bare-glass slides were obtained by using the Langmuir-Blodgett (LB) technique. Orientation of the NBD probe molecule in LB monolayer film was measured with polarized absorption spectroscopy. The observed tilt angle of the probe transition dipole moment with respect to the surface normal of approximately 67-68 degrees was evaluated. We observed that the NBD monolayers deposited in close proximity to silver islands show about a 16-fold increase in fluorescence intensity and shortened fluorescence lifetime compared to those on bare-glass, which are due to metal enhanced fluorescence. On the other hand, the corresponding MEF from randomly oriented film obtained by using spin coating of the probes on SIFs was only 2.5-fold. Further, we deposited mixed monolayers of NBD-C16 or NBD-C18 with various molar ratios of stearic acid to understand the polarity effect on MEF. Interestingly, we found a consistent increase in MEF efficiency with increasing molar ratio of stearic acid. Along with MEF, we also found a continuous blue-shift in emission band maxima of the probes with an increasing molar ratio of stearic acid. The observed increase in MEF efficiency is justified based on cooperative effects of (1) the modulations in electronic density of the surface plasmon absorption band of SIFs and (2) defined probe orientation that might lead to preferential excitation.     

Compression behavior of Langmuir-Blodgett monolayers of regioselectively substituted cellulose ethers with long alkyl side chains

Regioselectively substituted alkylcellulose ethers having long alkyl side chains, 6-O- (6C18), 2,3-di-O- (23C18), and tri-O-octadecyl-cellulose (triC18) were successfully synthesized. The key step of these syntheses was removal of the residual alkylation reagent by an isothermal crystallization procedure to isolate and purify the compounds, since a physical entanglement between the long alkyl side chains in the cellulose derivatives and the reagent had caused difficulty in obtaining the purified derivatives. After the monolayers from these cellulose ethers were fabricated on a water surface, they were deposited on substrates by a vertical dipping method to be Langmuir-Blodgett (LB) monolayers. During the compression process of each monolayer, a surface pressure (pi)-area (A) isotherm behaved in a different way. Atomic force microscopy (AFM) was employed to interpret changes of the surface topography of the obtained LB monolayers depending on the surface pressure. The compressed 23C18 LB monolayer was observed to be more homogeneous than other samples. On the basis of the LB monolayer thickness estimated by AFM as well as X-ray reflection measurements, the 23C18 LB monolayer was assumed to possibly possess the vertical arrangement of an up-ordering of all the alkyl side chains on the individual glucose ring against the water surface. In other words, with increase in the surface pressure, the usual conformation of a 2(1) screw of cellulose backbone may be changed into an unusual conformation with a certain phi-psi dihedral angle resulting in 1-fold axis without a symmetry element. These results suggest that the formation of such compressed LB monolayers was strongly influenced by the hydrophobic interaction among the distribution of the long alkyl side chains in the anhydroglucose unit and further lack of inter- and/or intramolecular hydrogen bonds engaged in cellulose ethers, and as a result, those effects may even change the main chain conformation.     

Effects of the surface pressure on the formation of Langmuir-Blodgett monolayer of nanoparticles

The effects of the surface pressure on the particle arrangement of Langmuir-Blodgett (LB) monolayers of alkanethiol-capped gold nanoparticles were studied. The LB monolayers were prepared from a highly concentrated particle solution, which increases film fabrication efficiency but readily causes small particle voids in the particle array. Overcompressing the LB monolayer to a high surface pressure restructured the particles and eliminated the voids. When the gold particles capped by dodecanethiol were 8.5 nm in diameter, the particle arrangement was vastly improved and a wafer-scale LB monolayer was transferred onto a substrate at the surface pressure of 20 mN/m.     

Surface enhanced resonance Raman scattering imaging of Langmuir-Blodgett monolayers of bis (benzimidazo) thioperylene.

The synthesis, spectroscopic characterization and surface-enhanced spectroscopy of a new electro active organic material bis (benzimidazo) thioperylene (Monothio BZP) are reported. Langmuir monolayers of Monothio BZP were successfully formed on water subphase and characterized by the pi-A surface-pressure area isotherm. Langmuir-Blodgett (LB) monomolecular layers of Monothio BZP were fabricated onto glass substrates and onto silver island films for surface-enhanced spectroscopic studies. The results of surface-enhanced resonance Raman scattering (SERRS), SERRS imaging and surface-enhanced fluorescence (SEF) studies for Monothio BZP LB monolayers are reported. Raman imaging (global imaging and point-by-point mapping) of the SERRS signal for a single monomolecular layer on silver islands were obtained using the 514.5 nm laser line. The SERRS imaging permits a visualization of the variation of the SERRS intensity across of the rough metal surface. The SEF was recorded for the excimer emission of aggregates in the LB film. The distance dependence and the enhancement factor of SEF were determined using fatty acid spacing layers. A temperature dependence study of the LB monolayer SERRS and SEF spectra was carried out between -190 degrees and + 200 degrees C confirming the thermal stability of the LB monolayer on silver. The specificity and the sensitivity of SERRS signal on metal island films was probed using mixed LB films with 0.01% molecular ratio of Monothio BZP in Arachidic Acid (AA). The micro-Raman SERRS spectra from ca. 10(-3) attomole of the dye were recorded.     

Fabrication of dialkyldimethylammonium/vanadium oxide gel hybrid Langmuir-Blodgett membranes

A hybrid Langmuir-Blodgett (LB) membrane of dialkyldimethylammonium (DCnA, n=12?18) and vanadium oxide gel was fabricated by compressing a DC _n A monolayer on an aqueous vanadium oxide solution. The vanadium oxide gel effectively aggregated in situ as a monolayer on the LB trough and stabilized the ammonium monolayer by electrostatic interaction. The hybrid LB monolayer, transferred onto a silicon wafer, had a smooth surface, with less than 1-nm roughness over a 1 μm × 1 μm square area. Multilayered membranes, prepared by repeated transfer of monolayers, showed sharp XRD patterns, assigned as an ordered bilayer-type structure with 2.9–4.8 nm thickness.     

Langmuir-Blodgett film of hydrophobin protein from Pleurotus ostreatus at the air-water interface

We present results concerning the formation of Langmuir-Blodgett (LB) films of a class I hydrophobin from Pleurotus ostreatus at the air-water interface, and their structure as Langmuir-Blodgett (LB) films when deposited on silicon substrates. LB films of the hydrophobin were investigated by atomic force microscopy (AFM). We observed that the compressed film at the air-water interface exhibits a molecular depletion even at low surface pressure. In order to estimate the surface molecular concentration, we fit the experimental isotherm with Volmer's equation describing the equation of state for molecular monolayers. We found that about (1)/ 10 of the molecules contribute to the surface film formation. When transferred on silicon substrates, compact and uniform monomolecular layers about 2.5 nm thick, comparable to a typical molecular size, were observed. The monolayers coexist with protein aggregates, under the typical rodlet form with a uniform thickness of about 5.0 nm. The observed rodlets appear to be a hydrophilic bilayer and can then be responsible for the surface molecular depletion.     

Self-organization of a wedge-shaped surfactant in monolayers and multilayers

The self-organization behavior of a wedge-shaped surfactant, disodium-3,4,5-tris(dodecyloxy)phenylmethylphosphonate, was studied in Langmuir monolayers (at the air-water interface), Langmuir-Blodgett (LB) monolayers and multilayers, and films adsorbed spontaneously from isooctane solution onto a mica substrate (self-assembled films). This compound forms an inverted hexagonal lyotropic liquid crystal phase in the bulk and in thick adsorbed films. Surface pressure isotherm and Brewster angle microscope (BAM) studies of Langmuir monolayers revealed three phases: gas (G), liquid expanded (LE), and liquid condensed (LC). The surface pressure-temperature phase diagram was determined in detail; a triple point was found at approximately 10 degrees C. Atomic force microscope (AFM) images of LB monolayers transferred from various regions of the phase diagram were consistent with the BAM images and indicated that the LE regions are approximately 0.5 nm thinner than the LC regions. AFM images were also obtained of self-assembled films after various adsorption times. For short adsorption times, when monolayer self-assembly was incomplete, the film topography indicated the coexistence of two distinct monolayer phases. The height difference between these two phases was again 0.5 nm, suggesting a correspondence with the LE/LC coexistence observed in the Langmuir monolayers. For longer immersion times, adsorbed multilayers assembled into highly organized periodic arrays of inverse cylindrical micelles. Similar periodic structures, with the same repeat distance of 4.5 nm, were also observed in three-layer LB films. However, the regions of organized periodic structure were much smaller and more poorly correlated in the LB multilayers than in the films adsorbed from solution. Collectively, these observations indicate a high degree of similarity between the molecular organization in Langmuir layers/LB films and adsorbed self-assembled films. In both cases, monolayers progress through an LE phase, into LE/LC coexistence, and finally into LC phase as surface density increases. Following the deposition of an additional bilayer, the film reorganizes to form an array of inverted cylindrical micelles.     

Vibrational characterization of langmuir-blodgett monolayers of tetra(p-methoxyphenyl) porphine

Langmuir–Blodgett (LB) monolayers of tetra(p–methoxyphenyl)porphine (H₂TMPP) have been prepared, transferred to glass slides and metal surfaces, and characterized using surface–enhanced Raman scattering (SERS). The technique of mixed monolayers (H₂TMPP in a lipid matrix of arachidic acid) was used to obtain maximum enhancement in the SERS experiments.     

X-ray reflectivity study of polymer assembly at air-water interface

X-ray reflectivity (XR) measurements were carried out for amphiphilic diblock copolymer monolayers on water surface. From XR data, the layer thickness, and surface and interface roughnesses could be determined as a function of surface pressure. The XR experiments were performed using an ‘Air–Water Interface X-ray Reflectometer’ with conventional X-ray source (Cu target) in our laboratory. LB trough was equipped to the reflectometer, so the in situ measurements could be carried out for spread monolayers on water surface at different surface pressures. Kiessig fringes were observed for specular measurement for amphiphilic diblock copolymer, poly(α-methylstyrene)-poly(decyl 4-vinylpyridine) (P(α MSt)-b-P(4VP-C₁₀H₂₁I)) monolayers on water surface. It was observed that the thickness of the monolayer became thicker with increasing surface pressure. By curve fitting for the data obtained for the monolayer at surface pressure of 37 mN m^-1, the thicknesses of P(αMSt)₅₀ and P(4VP-C₁₀H₂₁I)₅₀ layers was determined to be 21 and 22 Å, respectively. Because the chain length of P(αMSt)₅₀ is calculated to be 126 Å in all-trans conformation, it was indicated that the molecules did not get aligned even when they were pressedto become such a dense state.     

稀土—β—二酮配合物LB膜和三线态能量转移研究

在胶束体系中，Eu3+的发光强度可通过加入La3+－TTA－Phen（TTA：噻吩甲酰三氟丙酮；Phen：邻菲咯琳）而大大增强，这种发光增强作用被认为是由配体TTA经过三线态向EU3+的共振能级转移能量所致[1]．本文利用LB技术将这种Eu3+增强的发光转移到有序排列的LB膜中，研究了La（TTA）3Phen对Eu3+的发光增强作用，并用LB方法探讨了这种分子间的能量转移过程，发现这种能量转移距离小于3um，属经由三线态的短程交换能量转移过程．同时，用荧光光谱和低角X衍射对这种混合稀土配合物LB膜进行了表征．1实验部分配合物La（TTA）3Phen和Eu…     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Langmuir monolayers based on rigid wedge-shaped dendrons of benzenesulfonic acid

The structure formation of wedge-shaped monodendrons based on symmetric benzenesulfonic acid with different lengths of peripheral alkyl chains was studied in Langmuir monolayers and Langmuir–Blodgett (LB) films. A phase transition from the liquid-expanded state to the liquid-condensed state was observed on compression of the Langmuir monolayers of the dendrons containing dodecyl lateral chains. The transition is accompanied by the formation of star-shaped aggregates visualized by Brewster angle microscopy. The three-layer LB transfer results in the reorganization of the monolayer into regions of bi-, tetra-, and hexalayers on a solid substrate with a low coverage of the surface. Homogeneous liquid-condensed mono layers are formed for the dendrons with hexa- and octadecyl chains, and the film thickness achieved by the LB transfer corresponds to the monolayer alignment of the molecules with the surface coverage up to 90%. It was determined that varying the alkyl length of wedge-shaped dendrones based on symmetric benzenesulfonic acid leads to a change in phase behavior of Langmuir monolayers as well as Langmuir–Blodgett films formed by them.     

Two-dimensional arrays of amphiphilic Zn2+-cyclens for guided molecular recognition at interfaces

The sterically guided molecular recognition of nucleobases, phosphates, adenosine, and uridine nucleotides on Langmuir monolayers and Langmuir-Blodgett monolayers of amphiphilic mono- or bis(Zn2+-cyclen)s assembled on thiolated surfaces was investigated. The stepwise selective binding of metal ions, uracil, or phosphate by dicetyl cyclen monolayers with variously tuned structures at the air/water interface was corroborated by the measurements of the corresponding LB films deposited onto quartz crystals. Two types of recognition surfaces were fabricated from Zn2+-dicetyl cyclen. The surface covered with a complex preformed in the Langmuir monolayer was capable both of imide and of phosphate binding. The similar complex formed directly in an LB film on thiolated gold was inactive with respect to imide. The surface plasmon resonance measurements evidenced the stepwise assembly of complementary nucleotides on SAM/LB templates through consecutive phosphate-Zn2+-cyclen coordination. Base pairing between nucleotides resulted in a formation of A-U bilayers comprising two complementary monolayers. Finally, we report on SAM/LB patterns designed for divalent molecular recognition of uridine phosphate by amphiphilic bis(Zn2+-cyclen).     

盐酸氯丙嗪作探针共振瑞利散射法测定环境水样中某些阴离子表面活性剂

在pH 3.0～5.0的HAc-NaAc缓冲溶液中, 盐酸氯丙嗪与十二烷基苯磺酸钠(SDBS)、十二烷基硫酸钠(SDS)和十二烷基磺酸钠(SLS)等阴离子表面活性剂反应形成离子缔合物时, 能导致共振瑞利散射(RRS)的显著增强并产生新的RRS光谱, 最大RRS峰分别位于277, 369和277 nm处, 方法对SDBS, SDS和SLS的检出限分别为0.018, 0.046和0.200 μg/mL, 其线性范围分别为0.09~10.0, 0.15~15.0 和0.67~12.5 μg/mL. 研究了适宜的反应条件及分析化学性质, 提出了一种用RRS技术灵敏、简便并快速测定阴离子表面活性剂的新方法.     

利用LB技术采用循环压缩方法在不同基底表面制备FePt纳米粒子单层膜

利用LB(Langmuir-Blodgett)技术, 采用循环压缩的方法在不同基底表面上制备FePt纳米粒子单层膜, 采用TEM和AFM等技术手段对其表面形貌进行表征. 研究结果表明, 采用循环压缩的方法可以大大提高单层膜的均匀性和致密性, 并且在不同的基底表面其成膜性能具有较大的差异.