Generation of bis(dithiolene)dioxomolybdenum(VI) complexes from bis(dithiolene)monooxomolybdenum(IV) complexes by proton-coupled electron transfer in aqueous media

Electron transfer oxidation reaction of bis(dithiolene)monooxomolybdenum(iv) (Mo(IV)OL(x)) complexes is studied as a model of oxidative-half reaction of arsenite oxidase molybdenum enzymes. The reactions are revealed to involve proton-coupled electron transfer. Electrochemical oxidation of Mo(IV)OL(x) yields the corresponding bis(dithiolene)dioxomolybdenum(vi) complexes in basic solution, where the conversion of Mo(IV)OL(dmed) supported by a smaller electron donating dithiolene ligand (1,2-dicarbomethoxyethylene-1,2-dithiolate, L(dmed)) to Mo(VI)O(2)L(dmed) is faster than that of Mo(IV)OL(bdt) with a larger electron donating dithiolene ligand (1,2-benzenedithiolate, L(bdt)) under the same conditions. Titration experiments for the electrochemical oxidation reveal that the reaction involves two-electron oxidation and two equivalents of OH(-) consumption per Mo(IV)OL(x). In the conversion process of Mo(IV)OL(x) to Mo(VI)O(2)L(x), the five-coordinate bis(dithiolene)monooxomolybdenum(v) complex (Mo(V)OL(x)) being a one-electron oxidized species of Mo(IV)OL(x) is suggested to react with OH(-). Mo(V)OL(x) reacts with OH(-) in CH(3)CN or C(2)H(5)CN in a 2?:?2 ratio to give one equivalent Mo(IV)OL(x) and one equivalent Mo(VI)O(2)L(x), which is confirmed by the UV-vis and IR spectroscopies. The low temperature stopped-flow analysis allows investigations of the mechanism for the reaction of Mo(V)OL(x) with OH(-). The kinetic study for the reaction of Mo(V)OL(dmed) with OH(-) suggests that Mo(V)OL(dmed) reacts with OH(-) to give a six-coordinate oxo-hydroxo-molybdenum(v) species, Mo(V)O(OH), and, then, the resulting species undergoes successive deprotonation by another OH(-) and oxidation by a remaining Mo(V)OL(dmed) to yield the final products Mo(IV)OL(dmed) and Mo(VI)O(2)L(dmed) complexes in a 1?:?1 ratio. In this case, the Mo(V)O(2) species are involved as an intermediate in the reaction. On the other hand, in the reaction of Mo(V)OL(bdt) with OH(-), coordination of OH(-) to the Mo(V) centre to give a six-coordinate Mo(V)O(OH)L(bdt) species becomes the rate limiting step and other intermediates are not suggested. On the basis of these results, the ligand effects of the dithiolene ligands on the reactivity of the bis(dithiolene)molybdenum complexes are discussed.     

Molybdenum(VI), (V) and (IV) complexes with chiral benzoin thiosemicarbazone

The chiral (ONS) dianionic Schiff base ligand benzoin thiosemicarbazone (H₂L) reacts with MoO₂(acac)₂ to give the polymeric complex [(MoO₂L) _n ] (1) (Type 1). The reaction of MoO₂L with pyridine (py), 3-picoline (3-pic) or 4-picoline (4-pic) gives [Mo^VIO₂LD] (D = py, 3-pic or 4-pic) (Type 1). Further, the reaction of [MoO₂L] or [MoO₂LD] with PPh₃ or reaction of [MoO₂L] with PPh₃ (plus bpy or phen, D) in the presence of donor reagents D gives [Mo^IVOL] or [Mo^IVOLD] (Type 2). On the other hand, the reaction of [MoO₂L] with hydrazides (zdhH₃) such as benzoylhydrazine (bhH₃), isonicotinoylhydrazine (inhH₃), nicotinoylhydrazine (nhH₃), salicyloylhydrazine (slhH₃) and thiosemicarbazide (tscH₃) produced non-oxo–diazenido complexes [MoL(zdh)] (Type 3). The complexes have been characterized by elemental analyses, molar conductance, magnetic moment, electronic, i.r. and e.s.r. spectroscopic measurements.     

Dinuclear oxovanadium(IV) thiolate complexes with ferromagnetically coupled interaction between vanadium centers

Two dinuclear oxovanadium(IV) thiolate complexes, [N(C5H11)4]2[VOL1]2 (1) and [N(C4H9)4][(VOL2)2(mu-OCH3)] (2) (where L1 = [(CH3)SiO(C6H4-2-S)2]3- and L2 = [(C6H5)PO(C6H4-2-S)2]2-), have been synthesized and characterized. The geometry of the anion in 1 can be classified to an edge-sharing bi-square-pyramid with a syn-orthogonal configuration. The one in 2 can be view as a face-sharing bioctahedron with two oxo groups in syn positions. Of note, these two complexes display intramolecular ferromagnetic interaction between two metal centers.     

Heterogeneous water oxidation by bidentate Schiff base manganese complexes in the presence of cerium(IV) ammonium nitrate

Oxygen evolution was observed upon mixing solid manganese(III) bidentate Schiff base complexes with aqueous solutions of cerium(IV) ammonium nitrate. However, oxygen evolution was not observed upon mixing solutions of the complexes (in acetonitrile) with Ce(IV). Electron-withdrawing substituents on the Schiff base ligands (NO₂, Br) enhanced the reactivity of the manganese complexes toward oxygen evolution. Oxygen evolution was also affected by R groups on the ligands, in the order Me > Et ≫ Bz. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Monomeric monooxomolybdenum(VI) complexes of arylazophenolates with one bidentate arylthiol ligand

Reaction of an excess of 2-aminobenzenethiol or thiosalicylic acid (H2T) with cis-[MoO2L] (H2L=tridentate 2,2-dihydroxyarylazo compound) causes elimination of one oxo ligand to give a monomeric monooxomolybdenum(VI) product [MoOL(T)]. These deep red complexes have been characterized by elemental analyses and spectroscopic techniques.     

Calcium manganese(IV) oxides: biomimetic and efficient catalysts for water oxidation

CaMnO(3) and Ca(2)Mn(3)O(8) were synthesized and characterized by SEM, XRD, FTIR and BET. Both oxides showed oxygen evolution activity in the presence of oxone, cerium(IV) ammonium nitrate and H(2)O(2). Oxygen evolution from water during irradiation with visible light (λ > 400 nm) was also observed upon adding these manganese oxides to an aqueous solution containing tris(2,2'-bipyridyl) ruthenium(II), as photosensitizer, and chloro pentaammine cobalt(III) chloride, as electron acceptor, in an acetate buffer. The amounts of dissolved manganese and calcium from CaMnO(3) and Ca(2)Mn(3)O(8) in the oxygen evolving reactions were reported and compared with other (calcium) manganese oxides. Proposed mechanisms of oxygen evolution and proposed roles for the calcium ions are also considered.     

Radical polymerization of styrene in the presence of Tin(IV) catecholate complexes

The synthesis of PS in the presence of diethyl(3,6-di-tert-butylcatecholato)tin(IV) tetrahydrofuranate and diphenyl(3,6-di-tert-butylcatecholato)tin(IV) tetrahydrofuranate has been studied. It has been found that such tin catecholates can act as chain length regulators in the polymerization of styrene and ensure a linear increase in molecular mass with conversion. Using the macroinitiators obtained in the presence of diphenyl(3,6-di-tert-butylcatecholato)tin(IV) tetrahydrofuranate, the postpolymerization of styrene has been carried out.     

Electron transfer reactions of nickel(III) and nickel(IV) complexes

This review narrates the electron transfer reactions of various nickel(III) and nickel(IV) complexes reported during the period 1981 until today. The reactions have been categorized mainly with respect to the type of nickel complexes. The reactivity of nickel(III) complexes of macrocycles, 2,2′-bipyridyl and 1,10-phenanthroline, peptides and oxime–imine, and of nickel(IV) complexes derived from oxime–imine, oxime and miscellaneous ligands with various organic and inorganic electron donors have been included. Kinetic and mechanistic features associated with such interactions have been duly analyzed. The relevance of Marcus cross-relation equations in the delineation of the electron transfer paths has also been critically discussed.     

Importance of platinum(II)-assisted platinum(IV) substitution for the oxidation of guanosine derivatives by platinum(IV) complexes

Guanosine derivatives with a nucleophilic group at the 5' position (G-5') are oxidized by the Pt (IV) complex Pt( d, l)(1,2-(NH 2) 2C 6H 10)Cl 4 ([Pt (IV)(dach)Cl 4]). The overall redox reaction is autocatalytic, consisting of the Pt (II)-catalyzed Pt (IV) substitution and two-electron transfer between Pt (IV) and the bound G-5'. In this paper, we extend the study to improve understanding of the redox reaction, particularly the substitution step. The [Pt (II)(NH 3) 2(CBDCA-O,O')] (CBDCA = cyclobutane-1,1-dicarboxylate) complex effectively accelerates the reactions of [Pt (IV)(dach)Cl 4] with 5'-dGMP and with cGMP, indicating that the Pt (II) complex does not need to be a Pt (IV) analogue to accelerate the substitution. Liquid chromatography/mass spectroscopy (LC/MS) analysis showed that the [Pt (IV)(dach)Cl 4]/[Pt (II)(NH 3) 2(CBDCA-O,O')]/cGMP reaction mixture contained two Pt (IV)cGMP adducts, [Pt (IV)(NH 3) 2(cGMP)(Cl)(CBDCA-O,O')] and [Pt (IV)(dach)(cGMP)Cl 3]. The LC/MS studies also indicated that the trans, cis-[Pt (IV)(dach)( (37)Cl) 2( (35)Cl) 2]/[Pt (II)(en)( (35)Cl) 2]/9-EtG mixture contained two Pt (IV)-9-EtG adducts, [Pt (IV)(en)(9-EtG)( (37)Cl)( (35)Cl) 2] and [Pt (IV)(dach)(9-EtG)( (37)Cl)( (35)Cl) 2]. These Pt (IV)G products are predicted by the Basolo-Pearson (BP) Pt (II)-catalyzed Pt (IV)-substitution scheme. The substitution can be envisioned as an oxidative addition reaction of the planar Pt (II) complex where the entering ligand G and the chloro ligand from the axial position of the Pt (IV) complex are added to Pt (II) in the axial positions. From the point of view of reactant Pt (IV), an axial chloro ligand is thought to be substituted by the entering ligand G. The Pt (IV) complexes without halo axial ligands such as trans, cis-[Pt(en)(OH) 2Cl 2], trans, cis-[Pt(en)(OCOCF 3) 2Cl 2], and cis, trans, cis-[Pt(NH 3)(C 6H 11NH 2)(OCOCH 3) 2Cl 2] ([Pt (IV)(a,cha)(OCOCH 3) 2Cl 2], satraplatin) did not react with 5'-dGMP. The bromo complex, [Pt (IV)(en)Br 4], showed a significantly faster substitution rate than the chloro complexes, [Pt (IV)(en)Cl 4] and [Pt (IV)(dach)Cl 4]. The results indicate that the axial halo ligands are essential for substitution and the Pt (IV) complexes with larger axial halo ligands have faster rates. When the Pt (IV) complexes with different carrier ligands were compared, the substitution rates increased in the order [Pt (IV)(dach)Cl 4] < [Pt (IV)(en)Cl 4] < [Pt (IV)(NH 3) 2Cl 4], which is in reverse order to the carrier ligand size. These axial and carrier ligand effects on the substitution rates are consistent with the BP mechanism. Larger axial halo ligands can form a better bridging ligand, which facilitates the electron-transfer process from the Pt (II) to Pt (IV) center. Smaller carrier ligands exert less steric hindrance for the bridge formation.     

Gold(I) complexes with thiolate and triphenylphosphine ligands

The reaction of [AuCl(PPh₃)] with Pb(SR)₂(R = C₂H₅, C₆H₅, CH₂C₆H₅, C₆F₅, C₆H₂Me₃-2,4,6, Prⁱ and Bu^t) provides a clean method to obtain complexes of the type [Au(SR)(PPh₃)] in good yields. The new compounds have been characterized by IR, ¹H, ³¹P, ¹⁹F and ³¹C NMR. A study by FAB mass spectrometry indicates that an ion-molecule aggregation process takes place.     

Cerium(IV)-driven oxidation of water catalyzed by mononuclear ruthenium complexes

This paper reviews results from study of mononuclear ruthenium complexes capable of catalyzing the oxidation of water to molecular oxygen. These catalysts may be classified into three groups, with different rate laws associated with O₂ evolution. In one class, O₂ evolution proceeds via radical coupling of the oxygen atom of an Ru^V=O species with a hydroxocerium(IV) ion. O₂ evolution catalyzed by the second class occurs via acid–base reaction of the oxygen atom of an Ru^V=O species with a water molecule. In the third group, the dominant mechanism is oxo–oxo radical coupling between two Ru^V=O species. Several significant properties of the oxidant Ce(IV) are also discussed, including the singlet biradical character of the hydroxocerium(IV) ion.     

Kinetics of cerium(IV) oxidation of macrocyclic complexes of chromium(III) and fate of chromium(IV) intermediates

Kinetics and mechanism of the cerium(IV) oxidation of Cr(III) complexes of a series of macrocyclic (or pseudomacrocyclic) ligands with [14]-membered intraligand ring-sizes have now been investigated at I = 1.0 M (LiClO₄) Temp. 30°C. The complexes of the formulation Cr(macrocycle)(X)(H₂O) where X = CHCl₂ and H₂O, n = 0 or 1 undergo oxidation to Cr(VI) with the formation of chromium(IV) intermediates. The observed kinetic parameters for the Ce(IV) oxidation of Cr(III) macrocyclic complexes have been discussed in terms of changes brought about by the macrocyclic ligands on the Cr(III)—Cr(IV) redox potentials and in specific rates for Cr(IV)—Cr(V) conversion. On the basis of this study, it has been suggested that the trapping of Cr(IV) is easier when a macrocyclic ligand having a symmetrical intra-ligand ring size and unsaturation in the cyclic structure is coordinated equatorially. Cyclic voltammetric studies indicate the formation of Cr(IV) transient in the case of electrochemical oxidation of trans-Cr(Me₄[14]tetraene)(H₂O).     

Kinetics and mechanism of the oxidation of guanosine derivatives by Pt(IV) complexes

The kinetics of redox reactions of the PtIV complexes trans-Pt(d,l)(1,2-(NH2)2C6H10)Cl4 ([PtIVCl4(dach)]) and Pt(NH2CH2CH2NH2)Cl4 ([PtIVCl4(en)]) with 5'- and 3'-dGMP (G) have been studied. These redox reactions involve substitution followed by an inner-sphere electron transfer. The substitution is catalyzed by PtII and follows the classic Basolo-Pearson PtII-catalyzed PtIV-substitution mechanism. We found that the substitutution rates depend on the steric hindrance of PtII, G, and PtIV with the least sterically hindered PtII complex catalyzing at the highest rate. 3'-dGMP undergoes substitution faster than 5'-dGMP, and [PtIVCl4(en)] substitutes faster than [PtIVCl4(dach)]. The enthalpies of activation of the substitution, DeltaH double dagger s, of 3'-dGMP is only 70% greater than that of 5'-dGMP (50.4 vs 30.7 kJ mol(-1)), but the entropy of activation of the substitution, DeltaS double dagger s, of 3'-dGMP is much greater than that of 5'-dGMP (-59.4 vs -129.5 J K(-1) mol(-1)), indicating that steric hindrance plays a major role in the substitution. The enthalpy of activation of electron transfer, DeltaH double dagger e, of 3'-dGMP is smaller than that of 5'-dGMP (88.8 vs 137.8 kJ mol(-1)). The entropy of activation of electron transfer, DeltaS double dagger e, of 3'-dGMP is negative, but that of 5'-dGMP is positive (-27.8 vs +128.8 J K-1 mol-1). The results indicate that 5'-hydroxo has less rotational barrier than 5'-phosphate, but it is geometrically unfavorable for internal electron transfer. The electron-transfer rate also depends on the reduction potential of PtIV. Because of its higher reduction potential, [PtIVCl4(dach)] has a faster electron transfer than [PtIVCl4(en)].     

Vanadium(V) hydrazido(2-) thiolate imine alkoxide complexes

The reaction of (Me(3)Si)(2)TIP with V(NNMe(2))(OAr)(3) results in the production of V(NNMe(2))(TIP)(OAr), where TIP is 2-((2-thiolatophenylimino)methylene)phenolate. The aryloxide is readily displaced by ISiMe(3) to form an insoluble iodide complex formulated as V(NNMe(2))(TIP)(I). The iodide was used to prepare three different complexes: [V(NNMe(2))(TIP)(dmpe)]I, [V(NNMe(2))(TIP)(Bu(t)bpy)][OTf], and [V(NNMe(2))(TIP)(Bu(t)bpy)][SbF(6)]. The phosphine derivative, [V(NNMe(2))(TIP)(dmpe)]I, was characterized by X-ray diffraction and shows a quite short N-N distance of 1.293(3) A indicative of a dominant isodiazene resonance form.     

Pentamethylcyclopentadienylplatinum(IV) complexes

Reaction of dichloro(η⁴-pentamethylcyclopentadiene)platinum with bromine yields a η⁵-pentamethylcyclopentadienylplatinum(IV) complex which is formulated as [C₅Me₅PtBr₃PtC₅Me₅]Br₃.     

Catalytic homologation of vinyltributylstannane to allyltributylstannane by Mo(IV) complexes in the presence of ethylene

We have found that CH2=CHSnBu3 is converted into CH2=CHCH2SnBu3 catalytically in the presence of Mo(IV) olefin complexes such as Mo(NAr)(CH2CH2)[biphen] (where Ar = 2,6-i-Pr2C6H3 and [biphen]2- = 3,3'-di-tert-butyl-5,5',6,6'-tetramethyl-1,1'-biphenyl-2,2'-diolate). The proposed mechanism involves formation of a metalacyclopentane (MC4) complex from ethylene and CH2=CHSnBu3, "contraction" of this MC4 complex to a metalacyclobutane (MC3) complex, and finally metathesis of the MC3 complex to give CH2=CHCH2SnBu3 and Mo(NAr)(CH2)[biphen]. These new findings suggest (inter alia) that contraction of an MC4 ring to an MC3 ring may be a much more common mode of decomposition of metalacyclopentane rings in d0 complexes than previously believed.     

Tris(thioimidazolyl)borate-zinc-thiolate complexes for the modeling of biological thiolate alkylations

The S3Zn-SR coordination of thiolate-alkylating enzymes such as the Ada DNA repair protein was reproduced in tris(thioimidazolyl)borate-zinc-thiolate complexes Tti(R)Zn-SR'. Four different Tti(R) ligands and nine different thiolates were employed, yielding a total of 12 new complexes. In addition, one Tti(R)Zn-SH complex and two thiolate-bridged [Tti(R)-SEt-Tti(R)]+ complexes were obtained. A selection of six thiolate complexes was converted with methyl iodide to the corresponding methyl thioethers and Tti(R)Zn-I. According to a kinetic analysis these reactions are second-order processes, which implies that the alkylations are likely to occur at the zinc-bound thiolates. They are much faster than the alkylations of zinc thiolates with N3 or N2S tripod ligands. The most reactive thiolate, Tti(Xyl)Zn-SEt, reacts slowly with trimethyl phosphate in a nonpolar medium at room temperature, yielding methyl-ethyl-thioether and Tti(Xyl)Zn-OPO(OMe)2 which can be converted back to the thiolate complex with NaSEt. This is the closest reproduction of the Ada repair process so far.     

Mechanism of oxidation of benzaldehyde by polypyridyl oxo complexes of Ru(IV)

The oxidation of benzaldehyde and several of its derivatives to their carboxylic acids by cis-[Ru(IV)(bpy)2(py)(O)]2+ (Ru(IV)=O2+; bpy is 2,2'-bipyridine, py is pyridine), cis-[Ru(III)(bpy)2(py)(OH)]2+ (Ru(III)-OH2+), and [Ru(IV)(tpy)(bpy)(O)]2+ (tpy is 2,2':6',2'-terpyridine) in acetonitrile and water has been investigated using a variety of techniques. Several lines of evidence support a one-electron hydrogen-atom transfer (HAT) mechanism for the redox step in the oxidation of benzaldehyde. They include (i) moderate k(C-H)/k(C-D) kinetic isotope effects of 8.1 +/- 0.3 in CH3CN, 9.4 +/- 0.4 in H2O, and 7.2 +/- 0.8 in D2O; (ii) a low k(H2O/D2O) kinetic isotope effect of 1.2 +/- 0.1; (iii) a decrease in rate constant by a factor of only approximately 5 in CH3CN and approximately 8 in H2O for the oxidation of benzaldehyde by cis-[Ru(III)(bpy)2(py)(OH)]2+ compared to cis-[Ru(IV)(bpy)2(py)(O)]2+; (iv) the appearance of cis-[Ru(III)(bpy)2(py)(OH)]2+ rather than cis-[Ru(II)(bpy)2(py)(OH2)]2+ as the initial product; and (v) the small rho value of -0.65 +/- 0.03 in a Hammett plot of log k vs sigma in the oxidation of a series of aldehydes. A mechanism is proposed for the process occurring in the absence of O2 involving (i) preassociation of the reactants, (ii) H-atom transfer to Ru(IV)=O2+ to give Ru(III)-OH2+ and PhCO, (iii) capture of PhCO by Ru(III)-OH2+ to give Ru(II)-OC(O)Ph+ and H+, and (iv) solvolysis to give cis-[Ru(II)(bpy)2(py)(NCCH3)]2+ or the aqua complex and the carboxylic acid as products.