High-capacity binding of proteins by poly(acrylic acid) brushes and their derivatives

Polymeric coatings with high protein-binding capacities are important for increasing the output of affinity-based protein purification and decreasing the detection limits of antibody microarrays. This report describes the use of thick poly(acrylic acid) (PAA) brushes to immobilize as much as 80 monolayers of protein. The brushes were prepared using a recently developed procedure that allows polymerization of 100-nm-thick poly(tert-butyl acrylate) films from a surface in just 5 min along with hydrolysis of these films to PAA in 15 min. Covalent binding of bovine serum albumin (BSA) to PAA brushes that were activated using standard coupling agents, however, resulted in immobilization of less than two monolayers of BSA because of competitive hydrolysis of the esters in the activated film. In contrast, derivatization of PAA with nitrilotriacetate (NTA)-Cu2+ complexes yielded films capable of binding many monolayers of protein via metal-ion affinity interactions. For example, derivatization of 55-nm-thick PAA films with NTA-Cu2+ allowed immobilization of about 15 monolayers (5.8 microg/cm2 or 58 nm) of BSA. The binding capacity was even higher for myoglobin (7.7 microg/cm2) and anti-IgG (9.6 microg/cm2). Remarkably, electrostatic adsorption of lysozyme in 55-nm-thick, underivatized PAA resulted in as much as 80 monolayers (16.2 microg/cm2 or 162 nm) of adsorbed protein. Polymer synthesis, derivatization, and swelling, as well as BSA immobilization kinetics and thermodynamics were characterized using reflectance FT-IR spectroscopy, ellipsometry, and protein assays.     

Surface-anchored poly(2-vinyl-4,4-dimethyl azlactone) brushes as templates for enzyme immobilization

We explored surface-anchored poly(2-vinyl-4,4-dimethyl azlactone) (PVDMA) brushes as potential templates for protein immobilization. The brushes were grown using atom transfer radical polymerization from surface-anchored initiators and characterized by a combination of ellipsometry, atomic force microscopy, and X-ray photoelectron spectroscopy. RNase A was immobilized as a model enzyme through the nucleophilic attack of azlactone by the amine groups in the lysines located in the protein. The surface density of RNase A increased linearly from 5 to 50 nm. For 50 nm thick poly(2-vinyl-4,4-dimethyl azlactone) brushes, 7.5 microg/cm2 of RNase A was bound. The kinetics and thermodynamics of RNase A immobilization, the activity relative to surface density, and the pH and temperature dependence were examined. A Langmuir-like model for binding kinetics indicates that the kinetics are controlled by the rate of adsorption of RNase A and has an adsorption rate constant, k(ads), of 2.8 x 10(-8) microg(-1) s(-1) cm3. A maximum relative activity of approximately 0.95, which is near the activity of free RNase A, was reached at 1.2 microg/cm2 (approximately 3.0 monolayers) of immobilized RNase A. The immobilized RNase A had a similar temperature and pH dependence as free RNase A, indicating no significant change in conformation. The PVDMA template was extended to other biotechnologically relevant enzymes, such as deoxyribonuclease I, glucose oxidase, glucoamylase, and trypsin, with relative activities higher than or comparable to those of enzymes immobilized by other means. PVDMA brushes offer an efficient route to immobilize proteins via the ring opening of azlactone without the need for activation or pretreatment while retaining high relative activities of the bound enzymes.     

Surface-grafted poly(acrylic acid) brushes as a precursor layer for biosensing applications: effect of graft density and swellability on the detection efficiency

Carboxyl groups along poly(acrylic acid) (PAA) brushes attached to the surface of a gold-coated substrate served as the precursor moieties for the covalent immobilization of amino-functionalized biotin or bovine serum albumin (BSA) to form a sensing probe for streptavidin (SA) or anti-BSA detection, respectively. Surface-grafted PAA brushes were obtained by acid hydrolysis of poly(tert-butyl acrylate) brushes, formerly prepared by surface-initiated atom transfer radical polymerization of tert-butyl acrylate. As determined by surface plasmon resonance, the PAA brushes immobilized with functionalized biotin or BSA probes not only showed good binding with the designated target analytes but also maintained a high resistance to nonspecific protein adsorption, especially those PAA brushes with a high surface graft density. Although the probe binding capacity can be raised as a function of the graft density of the PAA brushes or the amount of carboxyl groups along the PAA chains, the accessibility of the target analyte to the immobilized probe was limited at the high graft density of the PAA brushes. The effect was far more apparent for the BSA-anti-BSA probe-analyte pair than for the much smaller biotin-SA probe-analyte pair. The impact of the swellability of the PAA brushes, as tailored by the degree of carboxyl group activation, on both the sensing probe immobilization and analyte detection was also addressed. This investigation demonstrated that PAA brushes having a defined graft density have a promising potential as a precursor layer for biosensing applications.     

Imaging the binding ability of proteins immobilized on surfaces with different orientations by using liquid crystals

We report an investigation of the binding ability of a protein immobilized on surfaces with different orientations but in identical interfacial microenvironments. The surfaces present mixed self-assembled monolayers (SAMs) of 11-[19-carboxymethylhexa(ethylene glycol)]undecyl-1-thiol, 1, and 11-tetra(ethylene glycol) undecyl-1-thiol, 2. Whereas 2 is used to define an interfacial microenvironment that prevents nonspecific adsorption of proteins, 1 was activated by two different schemes to immobilize ribonuclease A (RNase A) in either a preferred orientation or random orientations. The binding of the ribonuclease inhibitor protein (RI) to RNase A on these surfaces was characterized by using ellipsometry and the orientational behavior of liquid crystals. Ellipsometric measurements indicate identical extents of immobilization of RNase A via the two schemes. Following incubation of both surfaces with RI, however, ellipsometric measurements indicate a 4-fold higher binding ability of the RNase A immobilized with a preferred orientation over RNase A immobilized with a random orientation. The higher binding ability of the oriented RNase A over the randomly oriented RNase A was also apparent in the orientational behavior of nematic liquid crystals of 4-cyano-4'-pentylcyanobiphenyl (5CB) overlayed on these surfaces. These results demonstrate that the orientations of proteins covalently immobilized in controlled interfacial microenvironments can influence the binding activities of the immobilized proteins. Results reported in this article also demonstrate that the orientational states of proteins immobilized at surfaces can be distinguished by examining the optical appearances of liquid crystals.     

Formation of high-capacity protein-adsorbing membranes through simple adsorption of poly(acrylic acid)-containing films at low pH

Layer-by-layer polyelectrolyte adsorption is a simple, convenient method for introducing ion-exchange sites in porous membranes. This study demonstrates that adsorption of poly(acrylic acid) (PAA)-containing films at pH 3 rather than pH 5 increases the protein-binding capacity of such polyelectrolyte-modified membranes 3-6-fold. The low adsorption pH generates a high density of -COOH groups that function as either ion-exchange sites or points for covalent immobilization of metal-ion complexes that selectively bind tagged proteins. When functionalized with nitrilotriacetate (NTA)-Ni(2+) complexes, membranes containing PAA/polyethylenimine (PEI)/PAA films bind 93 mg of histidine(6)-tagged (His-tagged) ubiquitin per cm(3) of membrane. Additionally these membranes isolate His-tagged COP9 signalosome complex subunit 8 from cell extracts and show >90% recovery of His-tagged ubiquitin. Although modification with polyelectrolyte films occurs by simply passing polyelectrolyte solutions through the membrane for as little as 5 min, with low-pH deposition the protein binding capacities of such membranes are as high as for membranes modified with polymer brushes and 2-3-fold higher than for commercially available immobilized metal affinity chromatography (IMAC) resins. Moreover, the buffer permeabilities of polyelectrolyte-modified membranes that bind His-tagged protein are ~30% of the corresponding permeabilities of unmodified membranes, so protein capture can occur rapidly with low-pressure drops. Even at a solution linear velocity of 570 cm/h, membranes modified with PAA/PEI/PAA exhibit a lysozyme dynamic binding capacity (capacity at 10% breakthrough) of ~40 mg/cm(3). Preliminary studies suggest that these membranes are stable under depyrogenation conditions (1 M NaOH).     

Comparison of <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> Lipase Immobilization Yield of Entrapment,Adsorption, and Covalent Bond Techniques

The purpose of this study was to immobilize lipase from Yarrowia lipolytica using three methods including inclusion, adsorption, and covalent bond to study enzyme leaching, storage, and catalytic properties. Sodium alginate and chitosan were the polymers selected to immobilize lipase by inclusion. The beads of each polymer were dried by freeze drying and fluidization. The results show that chitosan was more adapted to the inclusion of lipase. Even though freeze dried, bead activity was low compared to that of fluidized beads. The freeze-drying process seems to produce suitable beads for storage at 4 and 20 degrees C. The immobilization by adsorption was carried out on both celite and silica gel. Maximum immobilization yield of 76% was obtained with celite followed by 43% in silica gel. The enzyme adsorbed on the two supports exhibited greater stability at a certain temperature (50 degrees C) and in no polar solvents (Isooctane, n-heptane, and n-hexane). In addition, the lipase immobilized by covalent bond retained residual activity equitable to 70%. It was demonstrated that the enzyme immobilized by covalent bond showed greater activity (80%) after 5 months of storage.     

RAFT‐mediated synthesis of poly[(oligoethylene glycol) methyl ether acrylate] brushes for biological functions

The synthesis of poly[(oligoethylene glycol) methyl ether acrylate] [poly(OEGA)] brushes was achieved via reversible addition‐fragmentation chain transfer (RAFT) polymerization and used to selectively immobilize streptavidin proteins. Initially, gold surfaces were modified with a trithiocarbonate‐based RAFT chain transfer agent (CTA) by using an ester reaction involving a gold substrate modified with 11‐mercapto‐1‐undecanol and bis(2‐butyric acid)trithiocarbonate. poly(OEGA) brushes were then prepared via RAFT‐mediated polymerization from the surface‐immobilized CTA. The immobilization of CTA on the gold surface and the subsequent polymer formation were followed by ellipsometry, X‐ray photoelectron spectroscopy, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and water contact‐angle measurements. RAFT‐mediated polymerization method gave CTA groups to grafted poly(OEGA) termini, which can be converted to various biofunctional groups. The terminal carboxylic acid groups of poly(OEGA) chains were functionalized with amine‐functionalized biotin units to provide selective attachment points for streptavidin proteins. Fluorescence microscopy measurements confirmed the successful immobilization of streptavidin molecules on the polymer brushes. It is demonstrated that this fabrication method may be successfully applied for specific protein recognition and immobilization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Immobilization of urease in poly(1-vinyl imidazole)/poly(acrylic acid) network

In this study, urease was immobilized in a polymer network obtained by complexation of poly(1-vinyl imidazole) (PVI) with poly(acrylic acid) (PAA). Preparation of the polymer network was monitored by FT-IR spectroscopy. Scanning electron microscopy (SEM) revealed that enzyme immobilization had a strong effect on film morphology. Proton conductivity of the PVI/PAA network was measured via impedance spectroscopy under humidified conditions. Values of the Michaelis-Menten constant (K _M) for immobilized urease were higher than for the free enzyme, indicating a decreased affinity of the enzyme to its substrate. The basic characteristics (pH_opt, pH_stability, T _opt, T _stability, reusability, and storage stability) of immobilized urease were determined. The results show that the PAA/PVI polymer network is suitable for enzyme immobilization.     

Influence of Silica-Derived Nano-Supporters on Cellobiase After Immobilization

Core shell magnetite nanoparticle (CSMN) was successfully synthesized with diameter around 125 nm according to the determination with scanning electronic microscopy. SBA-15 with diameter around 31 nm was synthesized in our previous work as another supporter for immobilized degradation enzymes. The aim of this study was to investigate the influence of silica-derived nano-supporters on cellobiase after immobilization. With covalent method, glutaraldehyde was introduced to immobilize cellobiase. The immobilized enzyme efficiency, specific activity, and its characterization, including optimum pH, pH stability, optimum temperature for enzyme reaction, and enzyme thermal stability were investigated. Results show that the method of enzyme immobilization on both nano-supporters could improve cellobiase stability under low pH and high temperature conditions compared with the free enzyme. In the aspect of immobilization efficiency, SBA had higher amount of bounded protein than that of CSMN, but had lower specific enzyme activity than CSMN, assumably due to the change in silica surface properties caused by process of supporter synthesis.     

Use of insoluble yeast beta-glucan as a support for immobilization of Candida rugosa lipase

In the present study, insoluble yeast beta-glucan (IYG) has been explored as a support matrix for enzyme immobilization. IYG contains mainly beta-(1-3) linkages along with some intra- or inter-molecular branches of beta-(1-6) linkages with large number of free hydroxyl groups. Epichlorohydrin was used to convert these free hydroxyl groups into activated epoxy groups that are capable of forming covalent linkages with various groups of enzyme molecule. The epoxy-activated IYG was evaluated for immobilization of Candida rugosa lipase (CRL). Post-immobilization treatment of 5% glutaraldehyde was given in order to achieve stable and irreversible binding of enzyme on the support. The resultant biocatalytic IYG support expressed lipase activity of 8136.7 U/g and 59.6% activity yield. There was 51.05% retention of synthetic activity after six repeated esterification cycles, indicating its stability and reusability in non-aqueous medium. Moreover, the immobilized lipase gave the storage half-life of about 285 days (at 4 degrees C).     

Surfaces Coated with Polymer Brushes Work as Carriers for Histidine Ammonia Lyase

The immobilization of enzymes on solid supports is an important challenge in biotechnology and biomedicine. In contrast to other methods, enzyme deposition in polymer brushes offers the benefit of high protein loading that preserves enzymatic activity in part due to the hydrated 3D environment that is available within the brush structure. The authors equipped planar and colloidal silica surfaces with poly(2-(diethylamino)ethyl methacrylate)-based brushes to immobilize Thermoplasma acidophilum histidine ammonia lyase, and analyzed the amount and activity of the immobilized enzyme. The poly(2-(diethylamino)ethyl methacrylate) brushes are attached to the solid silica supports either via a “grafting-to” or a “grafting-from” method. It is found that the grafting-from method results in higher amounts of deposited polymer and, consequently, higher amounts of Thermoplasma acidophilum histidine ammonia lyase. All polymer brush-modified surfaces show preserved catalytic activity of the deposited Thermoplasma acidophilum histidine ammonia lyase. However, immobilizing the enzyme in polymer brushes using the grafting-from method resulted in twice the enzymatic activity from the grafting-to approach, illustrating a successful enzyme deposition on a solid support.     

Application of polymaleimidostyrene as a convenient immobilization reagent of enzyme in biosensor

Sulfhydryl groups of glucose oxidase (GOD) were reacted with maleimide groups of polymaleimidostyrene (PMS) which was coated onto the porous carbon sheet, and the carbon sheet immobilized by GOD was combined with an oxygen electrode to fabricate a glucose sensor. The activity of thiolated GOD immobilized to PMS is much larger than that of native GOD immobilized to PMS. The good linear relationship of glucose and oxygen current response was obtained in a concentration range from 0.1 to 2 mM and upper limit of linear range was found to be 3.0 mM. The immobilized GOD activity is highly dependent on pH at immobilization and the maximum activity was obtained at pH 5.5, probably because the SH groups of GOD that are indispensable for generation of enzyme activity is not exposed at this pH. It was found that PMS is very effective reagent to immobilize enzyme strongly via covalent bond, because high density of maleimide groups of PMS can catch not only exposed SH groups but also buried SH groups.     

Immobilization of tyrosinase on poly(indole-5-carboxylic acid) evidenced by electrochemical and spectroscopic methods

A conducting, polymeric film of poly(indole-5 carboxylic acid) has been prepared by electrochemical polymerization for covalent immobilization of an enzyme belonging to the family of phenoloxidases-tyrosinase. The polymer was characterized by cyclic voltammetry, UV-VIS and Raman spectroscopy in a buffer solution. As the polymer contains pendant carboxylic groups one-step carbodiimide method was used to immobilize tyrosinase on the polymer matrix. Immobilization of tyrosinase was confirmed by surface enhanced resonance Raman scattering spectra (SERRS) and by cyclic voltammetry as well. Tyrosinase was shown to retain its biological activity when being immobilized on the polymer surface. As proved by the electrochemical and spectroelectrochemical (UV-VIS) experiments, tyrosinase covalently bonded to the polymer matrix effectively catalyzes oxidation of catechol. The reduction current of o-quinones was measured as a function of catechol concentration. The linear dependence was found to be 15 microM of catechol with sensitivity of 250 mA/M cm2.     

Analysis of spherical polyelectrolyte brushes by small angle X-ray scattering

Spherical polyelectrolyte brushes （SPBs） with PS core and poly（acrylic acid） （PAA） brushes were prepared and analyzed by SAXS in this article. A radial electron density profile of SPB was brought up, which fits well with the SAXS result and shows a core-shell structure. The effect of pH on SPB form was represented by SAXS and it proves that the chains of SPB will stretch in response to increased pH owning to the increased electrostatic repulsion. SPBs immobilized with magnetic nanoparticles or bovine serum albumin （BSA） were prepared and analyzed by SAXS as well. SAXS could characterize the changes of electron density inside brushes of SPBs due to the immobilization of magnetic nanoparticles or BSA. This provides significant supports for further application of immobilized metal nanoparticles or proteins.     

Peptide-modified inverted colloidal crystal scaffolds with bone marrow stromal cells in the treatment for spinal cord injury

Carboxyl groups of surface-tethered poly(acrylic acid) (PAA) brushes should be able to serve as versatile moieties for a wide range of chemical modifications, including an attachment of bioactive species that can act as sensing probes for biosensors. In this research, poly(tert-butyl acrylate) (Pt-BA) brushes were prepared by surface-initiated atom transfer radical polymerization of tert-butyl acrylate. PAA brushes were then obtained after removal of the tert-butyl groups from the Pt-BA brushes by acid hydrolysis. The carboxyl group density of the PAA brushes can be varied as a function of chain length or molecular weight. The reactivity of the carboxyl groups of PAA brushes towards the immobilization of biotin, a frequently used model bioactive probe in biosensing applications, was evaluated. Qualitative determination of streptavidin (SA) binding to the biotin-attached PAA brushes was verified by fluorescence microscopy. The efficiency of the PAA brushes to act as a three dimensional (3D) precursor layer for biosensing applications was further demonstrated using surface plasmon resonance (SPR), where the biotin-attached PAA brushes showed an enhanced signal for the biospecific binding of SA in comparison with a self-assembled monolayer (SAM) of a carboxyl-terminated alkanethiol, used as a model two-dimensional (2D) conventional precursor layer. The PAA brushes showed very low non-specific interactions with two other tested proteins of a similar pI but different sizes. This desirable feature should be highly beneficial for the development of biosensors.     

Synthesis and characterization of poly(acrylic acid‐co‐acrylamide)/hydrotalcite nanocomposite hydrogels for carbonic anhydrase immobilization

To combine the advantages of a biopolymer with hydrotalcite in an enzyme immobilization system, the intercalation polymerization was used to prepare poly(acrylic acid‐co‐acrylamide)/hydrotalcite (PAA‐AAm/HT) nanocomposite hydrogels using sodium methyl allyl sulfonate as intercalation agent. Transmission electron microscopy, X‐ray diffraction, and Fourier transform infrared spectroscopy results revealed that sodium methyl allyl sulfonate chains entered into the interlayer of HT, the interaction between them has taken place, and HT was dramatically exfoliated into nanoscale and homogeneously dispersed in the PAA‐AAm matrix. Transmission electron microscopy and cryo scanning electron microscope results showed that dried hydrogels were regular spherical particles, and swollen hydrogels revealed homogeneous porous network structures. Then, PAA‐AAm/HT nanocomposite hydrogels were used to immobilize carbonic anhydrase (CA), and the CO₂ hydration activities of free enzyme and immobilized enzyme were evaluated. Results showed that immobilized CA retained the majority of the enzyme activity. The reason may be the formation of a microenvironment almost all of which is composed of free water inside the porous network structures. Therefore, the immobilized CA is of great potential in the removal of trace CO₂ from the closed spaces. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3232–3240, 2009     

含氨基和环氧基双功能基的聚合物刷磁性微球的制备及对青霉素G酰化酶的固定化

在内部分散超顺磁性Fe3O4纳米粒子的二乙烯苯交联聚丙烯酸微球表面引入原子转移自由基聚合(ATRP)引发剂,引发聚合向微球表面分别引入P(GMMA-r-DMAEMA-r-GMA)、P(GMMA-r-DMAEMA)和P(GMMA-r-GMA)无规共聚物刷(GMMA为甲基丙烯酸甘油单酯,DMAEMA为甲基丙烯酸-N,N-二甲氨基乙酯,GMA为甲基丙烯酸缩水甘油酯),聚合物刷中GMMA链节的作用是使聚合物刷具有亲水性,DMAEMA引入氨基,GMA引入环氧基.研究了青霉素G酰化酶在这些载体上的固定化和其酶活性.结果表明,同时引入环氧基和氨基的P(GMMA-r-DMAEMA-r-GMA)刷磁性微球固定化青霉素G酰化酶的活性和活性收率都最高,其固定化动力学比只含环氧基P(GMMA-r-GMA)刷磁性微球的好.固定化酶比自由酶更耐热,固定化酶的最佳pH值比自由酶的略高,固定化酶重复使用10次后其活性保留70%.     

Bioconjugation of alkaline phosphatase to mechanically processed, aqueous suspendible electrospun polymer nanofibers for use in chemiluminescent detection assays

Aqueous suspendible polymer nanostructures were prepared by simple microtome processing of electrospun nylon 6 nanofibers and were used to immobilize calf intestinal alkaline phosphatase (ALP) by either covalent or noncovalent bioconjugation chemistries. It was found that noncovalent immobilization of ALP to the mechanically cut nanofibers (mean length approximately 4 microm; mean diameter approximately 80 nm) using a multi-stacked, layer-by-layer (LBL) approach with the cationic polymer Sapphire II resulted in the highest enzyme loading (48.1 +/- 0.4 microg . mg(-1) nanofiber) when compared to other covalent immobilization methods based on glutaraldehyde crosslinking. The biofunctionalized nanofibers were also characterized for their chemiluminescent activity with the dioxetane substrate, CSPD. The results indicate that the kinetic parameters, K(m) and V(max), for the catalytic activity of the nanostructure-bound ALP enzyme were influenced by the particular types of immobilization methods employed. In terms of the overall catalytic performance of the various immobilized ALP systems, a single-stacked LBL assembly approach resulted in the highest level of enzymatic activity per unit mass of nanofiber support. To the best of our knowledge, this study represents the first report examining the preparation of mechanically shortened, aqueous dispersed electrospun polymer nanofibers for potential application as enzyme scaffolds in chemiluminescent-based assay systems.     

Immobilization of Fungal β-Glucosidase on Silica Gel and Kaolin Carriers

β-Glucosidase is a key enzyme in the hydrolysis of cellulose for producing feedstock glucose for various industrial processes. Reuse of enzyme through immobilization can significantly improve the economic characteristics of the process. Immobilization of the fungal β-glucosidase by covalent binding and physical adsorption on silica gel and kaolin was conducted for consequent application of these procedures in large-scale industrial processes. Different immobilization parameters (incubation time, ionic strength, pH, enzyme/support ratio, glutaric aldehyde concentration, etc.) were evaluated for their effect on the thermal stability of the immobilized enzyme. It was shown that the immobilized enzyme activity is stable at 50 °C over 8 days. It has also been shown that in the case of immobilization on kaolin, approximately 95% of the initial enzyme was immobilized onto support, and loss of activity was not observed. However, covalent binding of the enzyme to silica gel brings significant loss of enzyme activity, and only 35% of activity was preserved. In the case of physical adsorption on kaolin, gradual desorption of enzyme takes place. To prevent this process, we have carried out chemical modification of the protein. As a result, after repeated washings, enzyme desorption from kaolin has been reduced from 75 to 20–25% loss.     

Hemoglobin on phosphonic acid terminated self-assembled monolayers at a gold electrode: immobilization, direct electrochemistry, and electrocatalysis

Phosphonic acid (--PO(3)H(2)) terminated self-assembled monolayers (SAMs) on a gold surface were used as a functional interface to immobilize hemoglobin (Hb). In situ surface-enhanced infrared absorption spectroscopy (SEIRAS) measurements show that Hb immobilization is a sluggish process due to formation of multilayer Hb structures on the PO(3)H(2)-terminated SAMs, as revealed by ellipsometry, atomic force microscopy (AFM), and cyclic voltammetry (CV). In the multilayered Hb film, the innermost Hb molecules can directly exchange electrons with the electrode, whereas Hb beyond this layer communicates electronically with the electrode via protein-protein electron exchange. In addition, electrochemical measurements indicate that immobilization of Hb on the PO(3)H(2)-terminated SAMs is not driven by the electrostatic interaction, but likely by hydrogen-bonding interaction. The immobilized Hb molecules show excellent bioelectrocatalytic activity towards hydrogen peroxide, that is, the PO(3)H(2)-terminated SAMs are promising for construction of third-generation biosensors.