Gas-phase reaction of NO3 radicals with isoprene: a kinetic and mechanistic study

The gas-phase reaction of NO₃ radicals with isoprene was investigated under flow conditions at 298 K in the pressure range 6.8<P(mbar)<100 using GC-MS/FID, direct MS, and long-path FT–IR spectroscopy as detection techniques. By means of a relative rate method, the rate constant for the primary attack of NO₃ radicals toward isoprene was determined to be (6.86±2.60)×10⁻¹³ cm³ molecule⁻¹ s⁻¹. The formation of the possible oxiranes, 2-methyl-2-vinyl-oxirane and 2-(1-methyl-vinyl)-oxirane, was observed in dependence on total pressure. In the presence of O₂ in the carrier gas, the product distribution was found to be strongly dependent on the reaction pathways of formed peroxy radicals. If the peroxy radicals mainly reacted in a self-reaction, the formation of organic nitrates was detected and 4-nitroxy-3-methyl-but-2-enal was identified as a main product. On the other hand, when NO was added to the gas mixture and the peroxy radicals were converted via RO₂+NO→RO+NO₂, the formation of methyl vinyl ketone as the main product as well as 3-methylfuran and meth-acrolein was observed. From the ratio of the product yields if NO was added to the gas mixture it was concluded that the attack of NO₃ radicals predominantly takes place in the 1-position. A reaction mechanism is proposed and the application of these results to the troposphere are discussed. © 1997 John Wiley & Sons, Inc.     

Gas-phase pyrolytic reaction of 3-anilino-1-propanol derivatives: kinetic and mechanistic study

3-Anilino-1-propanol derivatives 4a-c, 5a-c, 6a-c containing primary, secondary, and tertiary alcohols and PhNH, PhNMe, and (Ph)₂N were prepared and subjected to gas-phase pyrolysis in a static reaction system. The pyrolytic reactions were homogeneous and followed a first-order rate equation. Reactions took place by retro-ene process, with the exception of compounds 5a and 5b. Analysis of the pyrolysate showed the products to be N-substituted aniline and carbonyl compounds. The kinetic results and product analysis of each of the nine investigated 3-amino alcohols are rationalized in terms of a plausible transition state for the elimination pathway.     

An electrochiroptical molecular switch: mechanistic and kinetic studies

Previously, we reported the synthesis and preliminary characterization of Cu(I/II) complexes of N,N-bis(2-quinilylmethyl)-(l)-methionine (Zahn, S.; Canary, J. W. Science 2000, 288, 1404-7). The chemically oxidized and reduced forms of the complexes gave nearly mirror image circular dichroism (CD) spectra as a result of reorganization of the inner coordination sphere of the copper atom. The reorganization involved exchange of oxygen for sulfur in proceeding from the Cu(II) to Cu(I) oxidation state and corresponding ligand conformational changes required to accommodate this exchange. In this paper, we demonstrate that the complex can be triggered by electrochemical means. The electrochemical and stereochemical details of the redox-induced ligand reorganization were probed by independent synthesis of alternative chemical intermediates, CD spectroelectrochemistry, curve fitting of cyclic voltammograms, CD titration, and scanning electrochemical microscopy (SECM). A square-type mechanism was most consistent with the data: the Cu(II) complex is reduced followed by a ligand reorganization step to give the stable reduced form of the complex. The Cu(I) complex is then oxidized in a fast step followed by another ligand reorganization. A millisecond time scale rate was found by SECM for one of the key conformational conversion steps.     

Gas-phase thermolysis of benzotriazole derivatives. Part 3: Kinetic and mechanistic evidence for biradical intermediates in pyrolysis of aroylbenzotriazoles and related compounds

Gas-phase pyrolysis (static and FVP) of 1-aroylbenzotriazoles gave the corresponding substituted benzoxazole, benzimidazole, benzamide, N-phenylbenzamide, phenanthridin-6(5H)-one derivatives and 1-cyanocyclopentadiene. The present kinetic and mechanistic findings also provide further evidence of the involvement of biradical or carbene reactive intermediates in the reaction pathway of gas-phase pyrolysis of benzotriazoles.     

Synthesis of some vinyl-substituted pyrylium salts and their intermediates

The preparation of vinyl-substituted pyrylium salts and their intermediates is described. These monomers and intermediates have been derived from syntheses based on p-2-hydroxyethoxybenzaldehyde and 4-methoxypyrylium salts. Treatment of the hydroxybenzaldehyde with acetophenone gives a hydroxypyrylium intermediate which, when methacrylated, gives a pyrylium methacrylate. Methacrylation of the hydroxy-benzyldehyde followed by condensation with methylpyrylium salts gives styryl-pyrylium methacrylates. Displacement of the methoxy group in methoxypyrylium salts with ethanolamine derivatives followed by methacrylation yields a series of aminopyrylium methacrylates. The preparation of a divinylpyrylium urethane and a pyrylium-type copolymer is also described.     

Nanocluster nucleation and growth kinetic and mechanistic studies: a review emphasizing transition-metal nanoclusters

A review of the literature of kinetic and mechanistic studies of transition-metal nanocluster nucleation and growth is presented; the focus is on nucleation processes. A brief survey of nucleation theory is given first, with an emphasis on classical nucleation theory, as this is the logical starting point of transition-metal nanocluster nucleation and growth studies. The main experimental methods for following nanocluster formation are examined next--dynamic light scattering, UV-visible spectroscopy, electron microscopy, and X-ray spectroscopies--with special attention paid to their strengths and weaknesses. Several specific examples of transition-metal nanocluster formation are then given, beginning with LaMer's classic sulfur sol system and including the Finke-Watzky mechanism of slow continuous nucleation A-->B followed by fast autocatalytic surface growth A+B-->2B. Finally, brief overviews of semiconductor nanoparticle preparations, solid-state nucleation studies-emanating from Avrami's work--and protein agglomeration mechanistic studies are also provided, as these processes are relevant, conceptually and in a general sense, to the field of transition-metal nanocluster nucleation and growth mechanisms.     

Oxidation of some catecholamines by sodium N-chloro-p-toluenesulfonamide in acid medium: A kinetic and mechanistic approach

The kinetics of the oxidation of five catecholamines viz., dopamine (A), L-dopa (B), methyldopa (C), epinephrine (D) and norepinephrine (E) by sodium N-chloro-p-toluenesulfonamide or chloramine-T (CAT) in presence of HClO₄ was studied at 30±0.1 °C. The five reactions followed identical kinetics with a first-order dependence on [CAT] _o , fractional-order in [substrate] _o , and inverse fractional-order in [H⁺]. Under comparable experimental conditions, the rate of oxidation of catecholamines increases in the order D>E>A>B>C. The variation of ionic strength of the medium and the addition of p-toluenesulfonamide or halide ions had no significant effect on the reaction rate. The rate increased with decreasing dielectric constant of the medium. The solvent isotope effect was studied using D₂O. A Michaelis-Menten type mechanism has been suggested to explain the results. Equilibrium and decomposition constants for CAT-catecholamine complexes have been evaluated. CH₃C₆H₄SO₂NHCl of the oxidant has been postulated as the reactive oxidizing species and oxidation products were identified. An isokinetic relationship is observed with β=361 K, indicating that enthalpy factors control the reaction rate. The mechanism proposed and the derived rate law are consistent with the observed kinetics.     

Oxidation of some primary amines by bromamine-B in alkaline medium: A kinetic and mechanistic study

The kinetics of oxidation of the aliphatic primary amines, n-propylamine, n-butylamine, and isoamylamine, by sodium N-bromobenzenesulfonamide or bromamine-B (BAB) in sodium hydroxide medium has been studied at 35° C. The reaction rate shows a first-order dependence each on [BAB] and [amine], and fractional order on [OH^-]. Additions of halide ions and the reduction product of BAB (benzenesulfonamide), and variation of ionic strength and dielectric constant of the medium do not have any significant effect on the reaction rate. Activation parameters have been evaluated. A Taft linear free-energy relationship is observed for the reaction with ρ* = −3.0 and δ = − 2.0 indicating that electron-donating groups enhance the rate. An isokinetic relationship is observed with β = 393 K indicating that enthalpy factors control the rate. The existence of the relationship has been supported by the Exner criterion. Mechanisms consistent with the observed kinetic data have been proposed. © 1996 John Wiley & Sons, Inc.     

ZrIV-tetraphenylporphyrinates as nuclease mimics: structural, kinetic and mechanistic studies on phosphate diester transesterification

The Zr(IV)-tetraphenylpor-phyrinates Zr(TPP)(X,X'), (X,X' = -OAc, -OMe, Cl ) 4-6, 8 were prepared and their complexing properties as well as catalytic properties towards solvolysis of the phosphate diesters hpp (2), dmp (3) and pmp (16) characterised. The diesters 2 and 16, representing model phosphates for RNA and DNA, were substrates for the catalyst Zr(TPP)Cl2 (4), and rate accelerations over background by 6-9 orders of magnitude were measured. These accelerations are comparable to those of dinuclear transition metal catalysts and lanthanide ions. Catalytic turnover was observed. Kinetic studies revealed that the catalytically active species of 4 in the solvolysis of 2 and 16 in methanol-containing solvents are dinuclear complexes containing either one or two phosphate esters depending upon the phosphate concentration. Besides the usual solvolysis pathway of the RNA model hpp (2), which proceeds via the cyclophosphate 20, a second, unusual pathway via direct substitution of the hydroxypropyl substituent was found. X-ray analysis of the Zr(TPP)(dmp) complex 19 revealed a dinuclear structure with two bridging dmp ligands and one monomethyl phosphate unit. In 19 one of the two dmp residues occurs in a very unusual high energy ac,ap conformation. Based on this structure and on the kinetic data, mechanistic models for the two solvolysis reaction pathways were developed. From an extensive CSD search on phosphodiester structures no correlation between P-O ester bond lengths and diester conformations could be found. However, P-O ester bonds decrease in length with increasing formal charge of the complexing metal ions. This underlines the higher importance of electrostatic activation relative to stereoelectronic effects in phosphodiester hydrolysis.     

Ammonium-directed olefinic epoxidation: kinetic and mechanistic insights

The ammonium-directed olefinic epoxidations of a range of differentially N-substituted cyclic allylic and homoallylic amines (derived from cyclopentene, cyclohexene, and cycloheptene) have been investigated, and the reaction kinetics have been analyzed. The results of these studies suggest that both the ring size and the identity of the substituents on nitrogen are important in determining both the overall rate and the stereochemical outcome of the epoxidation reaction. In general, secondary amines or tertiary amines with nonsterically demanding substituents on nitrogen are superior to tertiary amines with sterically demanding substituents on nitrogen in their ability to promote the oxidation reaction. Furthermore, in all cases examined, the ability of the (in situ formed) ammonium substituent to direct the stereochemical course of the epoxidation reaction is either comparable or superior to that of the analogous hydroxyl substituent. Much slower rates of ring-opening of the intermediate epoxides are observed in cyclopentene-derived and cycloheptene-derived allylic amines as compared with their cyclohexene-derived allylic and homoallylic amine counterparts, allowing for isolation of these intermediates in both of the former cases.     

Oxidation of some monosaccharides by hexavalent manganese in aqueous alkaline medium: A kinetic and mechanistic study

The kinetics of oxidation of some monosaccharides viz., D-ribose, D-xylose, and D-arabinose, D-glucose, D-fructose, D-galactose, 2-deoxyglucose, and α-methyl glucopyranoside by MnO₄^2? in aqueous alkaline medium have been studied. The rate of oxidation has been found to be first-order both with respect to [oxidant] and [sugar]. The rate is independent of [OH^?] under experimental conditions of [OH^?] > 0.5 M where the oxidant is stable. The effect of ionic strength is negligible on the rate. A mechanism involving the formation of a 5-membered cyclic intermediate complex between MnO₄^2? and 1,2-enediol form of the sugar is proposed. The intermediate complex decomposes to give products in the subsequent slow step. The involvement of 1,2-enediol form receives support from the reaction of α-methyl glucopyranoside, which exists in ring structure in alkaline solution reacting much slower than glucose with MnO₄^2? under similar conditions. Second-order rate constant k″ and activation parameters have been evaluated. The series of reactions exhibits a clear demonstration of applicability of isokinetic phenomenon where Arrhenius plots for all the reactions are found to intersect at a common point (295 K). © 1995 John Wiley & Sons, Inc.     

Thallation of fluorenes: A kinetic and mechanistic study

The kinetics of thallation of fluorene with thallium triacetate (TTA) in HOAc-H₂SO₄ solutions led to the rate expression The rate of thallation is found to increase with increasing acid concentration, and a sixth-order dependence on [H₂SO₄] is observed. Decrease in solvent polarity increases the rate of thallation. The effect of substituents is in accord with the electrophilic substitution at an aromatic system. Thallation occurs at 4-position. A mechanism similar to aromatic bromination is proposed for the thallation of fluorene.     

Reaction progress kinetic analysis: a powerful methodology for mechanistic studies of complex catalytic reactions

Reaction progress kinetic analysis to obtain a comprehensive picture of complex catalytic reaction behavior is described. This methodology employs in situ measurements and simple manipulations to construct a series of graphical rate equations that enable analysis of the reaction to be accomplished from a minimal number of experiments. Such an analysis helps to describe the driving forces of a reaction and may be used to help distinguish between different proposed mechanistic models. This Review describes the procedure for undertaking such analysis for any new reaction under study.     

Laboratory kinetic and mechanistic studies on the OH-initiated oxidation of acetone in aqueous solution

The OH-initiated oxidation of acetone in aqueous solution is investigated because of its potential implications in atmospheric chemistry. The UV-spectrum of the transient acetonylperoxy radical was measured. Two characteristic absorption bands of the acetonylperoxy radical spectrum are found in the 220-400 nm wavelength region. The rate constant for the recombination reaction of the acetonylperoxy radical was determined as a function of temperature for the first time in aqueous solution with k(rec,298?K) = (7.3 ± 1.3) × 10(8) M(-1) s(-1), E(A) = 4.5 ± 3.3 kJ mol(-1), and A = (4.7 ± 2.7) × 10(9) M(-1) s(-1). Furthermore, kinetic investigations of the OH-initiated oxidation of methylglyoxal and pyruvic acid were performed with the following results: for methylglyoxal, k(second) = (6.2 ± 0.2) × 10(8) M(-1) s(-1), E(A) = 12 ± 2 kJ mol(-1), and A = (7.8 ± 0.2) × 10(9) M(-1) s(-1); for pyruvic acid (pH = 0), k(second) = (3.2 ± 0.6) × 10(8) M(-1) s(-1), E(A) = 15 ± 5 kJ mol(-1), and A?= (1.1 ± 0.1) × 10(11) M(-1) s(-1); for pyruvate (pH = 6), k(second) = (7.1 ± 2.4) × 10(8) M(-1) s(-1), E(A) = 25 ± 19 kJ mol(-1), and A = (1.5 ± 0.4) × 10(13) M(-1) s(-1). Quantitative product studies were done as a function of the number of laser photolysis pulses for acetone and its oxidation products methylglyoxal, hydroxyacetone, pyruvic acid, acetic acid, and oxalic acid. After the recombination reaction of acetonylperoxy radicals, there are two possible decomposition reactions where the primary products methylglyoxal and hydroxyacetone are formed. From product analysis after a single photolysis laser shot, the ratio of the main product-forming reactions was determined as (A) 30% and (B) 56% for the methylglyoxal formation via channel A to yield two molecules of methylglyoxal and channel B to yield one molecule of methylglyoxal and one molecule of hydroxyacetone. The remaining product can be ascribed to channel C, the radical-retaining channel forming alkoxy radicals with a yield of 14%. Pyruvic acid and acetic acid were found to be the major intermediates estimated with concentrations in the same order of magnitude and a similar time profile, indicating that acetic acid is also a possible oxidation product of methylglyoxal.     

Thermal behaviour and kinetic study of some triazoles as potential anti-inflammatory agents

Thermogravimetric (TG), differential thermogravimetric analysis and differential scanning calorimetry had been used to characterize the thermal stability of four new heterocyclic compounds with triazolic structure. The four analysed compounds have similar thermal behaviours, namely the thermal mal curves of these new compounds show three thermal events. These compounds were thermally stable up to 110 °C. Above this temperature, the evolution of hydrochloric acid took place as observed by EGA. Identification and the monitoring of gaseous species released during thermal decomposition of pure triazoles in air atmosphere have been carried out by coupled TG–FTIR. Between 110 and 220 °C the main gaseous product is HCl which was identified on the basis of these FTIR spectra. Arguments for a rapid thermooxidation of the four molecules were brought by EGA by identifying the substances which arise from both the destruction of side chains and of triazolic ring. The kinetic analysis of the destruction process of triazolic structure was investigated using the TG data in air for the substance’s decomposition in non-isothermal conditions. The isoconversional methods, Kissinger–Akahira–Sunose, Flynn–Wall–Ozawa and Friedman, were applied to determine the activation energy from the analysis of four curves measured at different heating rates. In order to obtain realistic kinetic parameters, even if the decomposition process is a complex one, the non-parametric kinetics method was also used. A good agreement between the data obtained from the four applied methods was found.     

Laser flash photolysis generation and kinetic studies of corrole-manganese(V)-oxo intermediates

Corrole-manganese(V)-oxo intermediates were produced by laser flash photolysis of the corresponding corrole-manganese(IV) chlorate complexes, and the kinetics of their decay reactions in CH2Cl2 and their reactions with organic reductants were studied. The corrole ligands studied were 5,10,15-tris(pentafluorophenyl)corrole (H3TPFC), 5,10,15-triphenylcorrole (H3TPC), and 5,15-bis(pentafluorophenyl)-10-(p-methoxyphenyl)corrole (H3BPFMC). In self-decay reactions and in reactions with substrates, the order of reactivity of (Cor)Mn(V)(O) was TPC > BPFMC > TPFC, which is inverted from that expected based on the electron-demand of the ligands. The rates of reactions of (Cor)Mn(V)(O) were dependent on the concentration of the oxidant and other manganese species, with increasing concentrations of various manganese species resulting in decreasing rates of reactions, and the apparent rate constant for reaction of (TPFC)Mn(V)(O) with triphenylamine was found to display fractional order with respect to the manganese-oxo species. The kinetic results are consistent in part with a reaction model involving disproportionation of (Cor)Mn(V)(O) to give (Cor)Mn(IV) and (Cor)Mn(VI)(O) species, the latter of which is the active oxidant. Alternatively, the results are consistent with oxidation by (Cor)Mn(V)(O) which is reversibly sequestered in non-reactive complexes by various manganese species.     

Efficient organotin catalysts for urethanes: kinetic and mechanistic investigations

Dibenzyltin bis(2‐ethylhexanoate) 1 (4‐Y C₆H₄CH₂)₂Sn(OC(O)R¹)₂ [Y = H, 1a; MeO, 1b; Cl, 1c; Me, 1d; and R¹ = MeCH₂CH₂CH₂CH(Et) ] were synthesized either from the reaction of corresponding dibenzyltin dichlorides with silver 2‐ethylhexanoate or from the reaction of dibenzyltin oxides with 2‐ethylhexanoic acid. Compound 1a was further utilized as a catalyst for the reaction of mono‐ and di‐isocyanates [PhNCO, CH₃C₆H₃‐2,4‐(NCO)₂ and OCN(CH₂)₆NCO] with alcohols (primary, secondary, tertiary, cyclohexcyl, alkyl, allyl, benzyl and aryl) leading to the formation of the corresponding urethanes. The catalytic efficiencies of 1 vis‐à‐vis industrially known organotin catalysts have been determined through kinetic studies for the reaction of PhNCO and n‐BuOH at various temperatures. Compounds 1a, 1c and 1d show higher efficiency than dibutyltin bis(2‐ethylhexanoate). FTIR studies further provide mechanistic insights into the catalytic cycle, which comprises pre‐coordination of isocyanate to tin(IV), formation of stannyl carbamate and generation of dibenzyl(alkoxy)carboxylate as the active catalyst. Copyright © 2000 John Wiley & Sons, Ltd.     

Theoretical mechanistic studies on oxidation reactions of some saturated and unsaturated organic molecules

This account describes the results collected by our group during the last years on some themes of environmental/mechanistic interest. Theoretical quantum-mechanical investigations have been carried out to help clarifying the mechanism of some oxidation reactions, which involve mainly unsaturated but also saturated organics as substrates, and, as reactive oxidants, triplet or singlet dioxygen, hydroxyl, ozone, and nitrogen oxides. Depending on the problem, the calculations are either multi-configurational (as CAS-MCSCF, CAS-PT2, MC-QDPT2), or based on the Density Functional Theory for the heavier systems. Research work has thus been developed along the following lines: hydrocarbon oxidations under atmospheric or combustion conditions; definition of a model for soot particles and their interaction with species as HO, O₂, O₃, NO, NO₂, NO₃, etc.; investigation on the reaction mechanism of ¹Δ_g dioxygen with organic unsaturated systems (cycloaddition and ene reactions).