Determination of synthesized alpha-vitamin E by micellar electrokinetic chromatography

We developed a micellar electrokinetic chromatography method (MEKC) for the direct determination of the content of synthesized alpha-vitamin E. It was found that under the optimum separation conditions 7 mM borate + 14 mM phosphate + 15 mM sodium dodecyl sulfate (SDS) + 10 mM sodium cholate (NaCh) + 8% acetonitrile (pH 9.2) with UV detection wavelength at 214 nm, 16 kV constant voltage, and 26 degrees C constant temperature, alpha-vitamin E and its isomers can be baseline separated and alpha-vitamin E was quantitatively analyzed. In addition, the sample recovery, the limit of detection and the repeatability of the method were investigated. The influence of various parameters on the separation such as SDS concentration, NaCh concentration, buffer pH and acetonitrile percentage were also discussed.     

Determination of capsaicin and dihydrocapsaicin by micellar electrokinetic capillary chromatography and its application to various species of Capsicum, Solanaceae.

An easy, rapid and sensitive method of analysis for capsaicin and dihydrocapsaicin and its application for determination of these two amides in fruit extracts of different varieties of Capsicum frutescens by micellar electrokinetic capillary chromatography has been developed. Optimum separation was achieved with a fused-silica capillary column (600 mm x 0.075 mm I.D) and a running buffer at pH 9.0 prepared from 15 mM sodium tetraborate and 15 mM sodium dihydrogenphosphate, and 67.5 mM sodium dodecyl sulphate. Addition of 15% (v/v) methanol in the running buffer was found to be essential for the separation. The applied voltage was +22.5 kV. The compounds were detected by UV at 214 nm. Both capsaicin and dihydrocapsaicin were detected within 11 min, with an excellent resolution.     

Analysis of Salvia officinalis plant extracts by capillary electrophoresis

Salvia officinalis (commonly called Sage) and similar plants contain many compounds of pharmaceutical interest and are used as a tea or in various pharmaceutical products. In this work, the use of CE for analysis of aqueous or ethanolic extracts from various Salvia plants has been studied. Especially, several buffers like borate, phosphate, acetate, etc., were examined under different concentrations, pH, separation voltage, injection time, and other parameters to find the optimal separation conditions. The optimization was also performed using experimental design and artificial neural networks. The optimal conditions were: separation voltage +20 kV, 40 mM buffer borate, pH 9.2, injection time 5 s, and UV detection at 280 nm. A new CE method has been developed, validated, and applied to analyze samples of S. officinalis from various countries.     

Nonaqueous capillary electrophoresis of dextromethorphan and its metabolites

This study deals with the nonaqueous capillary electrophoretic separation of dextromethorphan and its metabolites using a methanolic background electrolyte. The optimization of separation conditions was performed in terms of the resolution of dextromethorphan and dextrorphan and the effect of separation temperature, voltage, and the characteristics of the background electrolyte were studied. Complete separation of all analytes was achieved in 40 mM ammonium acetate dissolved in methanol. Hydrodynamic injection was performed at 3 kPa for 4 s. The separation voltage was 20 kV accompanied by a low electric current. The ultraviolet detection was performed at 214 nm, the temperature of the capillary was 25°C. These conditions enabled the separation of four analytes plus the internal standard within 9 min. Further, the developed method was validated in terms of linearity, sensitivity, and repeatability. Rat liver perfusate samples were subjected to the nonaqueous capillary electrophoretic method to illustrate its applicability.     

Development and validation of an MEKC method for determination of nitrogen-containing drugs in pharmaceutical preparations

A fast and accurate micellar electrokinetic capillary chromatography method was developed for quality control of pharmaceutical preparations containing cold remedies as acetaminophen, salicylamide, caffeine, phenylephrine, pseudoephedrine, norephedrine and chlorpheniramine. The method optimization was realized on a Beckman P/ACE System MDQ instrument. The baseline separation of seven analytes was performed in an uncoated fused silica capillary internal diameter (ID)=50 microm using tris-borate (20 mM, pH=8.5) containing sodium dodecyl sulphate 30 mM BGE. On line-UV detection at 214 nm was performed and the applied voltage was 10 kV. The operating temperature was 25 degrees C. After experimental conditions optimization, the proposed method was validated. The evaluated parameters were: precision of migration time and of corrected peak area ratio, linearity range, limit of detection, limit of quantification, accuracy (recovery), ruggedness and applicability. The method was then successfully applied for the analysis of three pharmaceutical preparations containing some of the analytes listed before.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Enantioseparation of palonosetron hydrochloride by micellar electrokinetic chromatography with sodium cholate as chiral selector

The enantioseparation of four stereoisomers of palonosetron hydrochloride by micellar electrokinetic chromatography using sodium cholate as chiral surfactant was described. Sodium cholate was shown to be effective in separating palonosetron hydrochloride stereoisomers. For method optimization, several parameters such as sodium cholate concentration, buffer pH and concentration, the types and concentration of organic modifiers and applied voltage, on the enantioseparation were evaluated and the optimum conditions were obtained as follows: 30 mM borate buffer (pH 9.40) containing 70 mM sodium cholate and 20% (v/v) methanol with an applied voltage of 20 kV. Under these conditions, baseline separation of palonosetron hydrochloride stereoisomers was achieved within 18 min.     

Determination of 5-methyl-cytosine and cytosine in tumor DNA of cancer patients

The determination of the relative methylation in DNA tumor samples, in order to evaluate the activity of some anti-cancer drugs, has become a very important issue in the clinical field. Capillary electrophoresis (CE) applications in this area have been done previously but no good separation for model samples or tumor samples has been reported. In this work, the CE conditions have been optimized in order to obtain baseline separation and efficient peaks for cytosine and 5-methylcytosine in both, standard mixtures and actual tumor samples; other bases (adenine, uracil, guanine, and thymine) have also been integrated in the optimization studies. More efficient peaks and shorter analysis time compared with the already reported conditions have been obtained employing a fused-silica capillary (75 microm inner diameter) of 44.5 cm effective length, 20 mM carbonate buffer (pH 9.6) plus 80 mM sodium dodecyl sulfate, a separation voltage of 20 kV, and detection at 223 nm.     

Separation and determination of strychnine and brucine in Strychnos nux-vomica L. and its preparation by capillary zone electrophoresis

A capillary zone electrophoresis method was developed for the separation and determination of strychnine and brucine in Strychnos nux-vomica L. and its preparation. The factors that could affect the separation were studied, such as the types and concentrations of electrolytes, pH, ionic strength and organic modifier. The optimum running buffer was 20 mmol/L of ammonium acetate containing 0.2 mol/L of glacial acetic acid (pH 3.64). The applied voltage was 25 kV and the wavelength of the UV detector was set at 214 nm. The established method with dopamine hydrochloride as internal standard was linear in the range of 5-100 microg/mL for both strychnine and brucine. The recovery was 102.96% for strychnine and 98.56% for brucine. The extracts of Strychnos nux-vomica and its preparation could be directly injected for analysis.     

Determination of nitrate and nitrite in rat brain perfusates by capillary electrophoresis

A fast and simple method for the direct, simultaneous detection of nitrite (NO(2) (-)) and nitrate (NO(3) (-)) in rat striatum has been developed using a capillary electrophoresis separation of low-flow push-pull perfusion samples. The method was optimized primarily for nitrite because nitrite is more important physiologically and is found at lower levels than nitrate. We obtained a complete separation of NO(2) (-) and NO(3) (-) in rat striatum within 1.5 min. Optimal CE separations were achieved with 20 mM phosphate, 2 mM cetyltrimethylammonium chloride (CTAC) buffer at pH 3.5. The samples were injected electrokinetically for 2 s into a 40 cm x 75 microm ID fused-silica capillary. The separation voltage was 10 kV (negative polarity), and the injection voltage was 16 kV (negative polarity). UV detection was performed at 214 nm. The limits of detection obtained at a signal-to-noise ratio (S/N) of 3 for nitrite and nitrate were 0.96 and 2.86 microM. This is one of the fastest separations of nitrite and nitrate of a biological sample ever reported. Interference produced by the high physiological level of chloride is successfully minimized by use of CTAC in the run buffer.     

Determination of five anthraquinones in medicinal plants by capillary zone electrophoresis with beta-cyclodextrin addition

A simple and rapid method for the simultaneous determination of five anthraquinone derivatives including aloe-emodin, emodin, chrysophanol, physcoin and rhein in Rheum species and Polygonum cuspidatum was established by capillary zone electrophoresis (CZE) using beta-cyclodextrin (CD) as modifier and urea to enhance its solubility. The apparent binding constants of these derivatives with beta-CD were evaluated. After an optimization study, the best conditions were selected using 35 mM phosphate buffer (pH 11.0) containing 20 mM beta-CD and 2 M urea, applied voltage 20 kV and detection at 254 nm. Under such conditions, all of the five anthraquinones were baseline-separated within a short analysis time of 12 min with symmetrical peaks and high theoretical plate numbers (189,000-314,000). The RSD values of the migration times and peak areas were 0.6-1.1, 1.3-1.9% (intra-day) and 0.6-1.5, 1.3-2.8% (inter-day, for a 5-day period), respectively. The limits of detection for the analytes (S/N = 3) were 0.33-0.62 microg/ml. The recoveries were ranged from 93.37 to 107.69%. The proposed method was successfully applied to the determination of anthraquinones in ethanol extracts of two kinds of Rheum plants (R. palmatum and R. hotaoense) and P. cuspidatum.     

Simultaneous and rapid determination of main lignans in different parts of Schisandra sphenanthera by micellar electrokinetic capillary chromatography

Lignans are imporant active ingredients of Schisandra sphenanthera. A micellar electrokinetic chromatography method was developed for the simultaneous determination of eight lignans--schizandrin, schisandrol B, schisantherin A, schisanhenol, anwulignan, deoxyschizandrin, schizandrin B and schizandrin C--in different parts of S. sphenanthera. The key factors for separation and determination were studied and the best analysis conditions were obtained using a background electrolyte of 10 mM phosphate-37.5 mM SDS-35% v/v acetonitrile (pH 8.0) at the separation voltage of 28 kV and detection at 214 nm, whereby the plant samples could be analyzed within 9.0 min. Analysis yielded good reproducibility (RSD between 1.19-2.28%) and good recovery (between 92.2-103.8%). The detection limits (LOD) and limit of quantification (LOQ) were within 0.4-1.2 mg/L and 1.5-4.0 mg/L. This method is promising to improve the quality control of different parts of S. sphenanthera.     

Capillary electrophoresis speciation of chromium in leather tanning liquor

We present a method for the speciation of chromium by capillary electrophoresis. Cr(III) was complexed with diethylenetriaminepentaacetic acid (DTPA) to form a negatively charged complex. Using 20 mM phosphate buffer of pH 8 containing 0.5 mM tetradecyltrimethylammonium hydroxide (TTAOH) at a separation voltage of -15 kV, both forms of chromium CrDTPA(2-) and CrO(4) (2-) were separated in less than 6 min. Direct UV detection at 214 nm was used. The effect of the presence of interfering ions was investigated. The application of the developed method to speciation of chromium in tanning liquor is demonstrated. The obtained results have shown a good correlation with those of flame atomic absorbance spectrometry (FAAS), inductively coupled plasma-mass spectrometry (ICP-MS) and UV/VIS spectrophotometry.     

Simultaneous Determination of Four Major Iridoid Glycosides in Scrophularia ningpoensis by CE

A simple, accurate and reproducible capillary electrophoresis method with UV detection has been developed for the simultaneous determination of four iridoid glycosides, 6-O-methyl-catalpol, aucubin, harpagide, and harpagoside, in Scrophularia ningpoensis (Xuan-shen). The running buffer was 100 mM borate (pH 9.3) containing 20% methanol. Applied voltage was 20 kV and temperature was 25 °C. Diphylloside A was used as an internal standard (IS) and detection was at 200 nm. The effects on separation of buffer pH, buffer concentration, and organic modifiers were investigated. The extracts of S. ningpoensis were well separated within 45 min.     

Simultaneous Determination of Four Major Iridoid Glycosides in Scrophularia ningpoensis by CE

A simple, accurate and reproducible capillary electrophoresis method with UV detection has been developed for the simultaneous determination of four iridoid glycosides, 6-O-methyl-catalpol, aucubin, harpagide, and harpagoside, in Scrophularia ningpoensis (Xuan-shen). The running buffer was 100 mM borate (pH 9.3) containing 20% methanol. Applied voltage was 20 kV and temperature was 25 °C. Diphylloside A was used as an internal standard (IS) and detection was at 200 nm. The effects on separation of buffer pH, buffer concentration, and organic modifiers were investigated. The extracts of S. ningpoensis were well separated within 45 min.

     

Experimental design optimization of a capillary zone electrophoresis method for the screening of several diuretics and ACE inhibitors

Experimental design methodologies are applied to the development of a capillary zone electrophoretic method for the separation of the angiotensin-converting enzyme inhibitor enalapril and its derivative enalaprilat and the diuretics xipamide and hydrochlorothiazide. The effects of pH, buffer concentration, proportion of boric acid in the mixed boric acid-potassium dihydrogen phosphate background electrolyte, temperature, applied voltage, and percentage of organic modifier are studied. Critical factors are identified in a screening design (a 2(6-2) fractional factorial design), and afterwards, optimal conditions for the separation are reached by means of an optimization design (a 2(2) + 2 x 2 + k central composite design). The studied response is the resolution between peaks. The four studied compounds can be separated in less than 3.5 min using an electrolyte of 20mM boric acid-potassium dihydrogen phosphate (75:25, v/v) with 5% MeOH adjusted to pH 8.0 with KOH, at a potential of 30 kV. The detection wavelength and temperature are 206 nm and 35 degrees C, respectively.     

Determination of cytokinins in coconut (Cocos nucifera L.) water using capillary zone electrophoresis-tandem mass spectrometry

The applicability of CZE in combination with MS and MS/MS methods for the simultaneous separation and determination of 12 cytokinins was investigated for the first time. Cytokinins were first completely separated by CZE within less than 20 min using a volatile buffer and then detected directly by MS or MS/MS. Satisfactory separation of the 12 cytokinin standards was achieved using a 25 mM ammonium formate/formic acid buffer (pH 3.4) and 3% ACN v/v with a separation voltage of 25 kV. On the basis of the resolution of the neighboring peaks, the various parameters for CZE-MS optimization, such as buffer pH value, concentration of buffer and organic modifier, applied voltage and sheath liquid, were evaluated systematically. MS/MS with multiple reaction monitoring detection was carried out to obtain sufficient selectivity and sensitivity. The combination of on-line sample stacking and CZE-MS/MS achieved a detection limit in the range of 0.05-0.18 microM for the 12 cytokinins at an S/N of 3. The optimized CZE-MS/MS method was simple, rapid, low cost, robust and highly selective. Furthermore, the developed method was successfully applied to screen for endogenous cytokinins in purified coconut water extract sample. Nine cytokinins were detected and quantified in coconut water after SPE.     

Application of 1-alkyl-3-methylimidazolium-based ionic liquids as background electrolyte in capillary zone electrophoresis for the simultaneous determination of five anthraquinones in Rhubarb

A capillary zone electrophoresis method using only 1-alkyl-3-methylimidazolium-based ionic liquids as background electrolyte for the simultaneous determination of five anthraquinone derivatives including aloe-emodin, emodin, chrysophanol, physcion and rhein in Rhubarb species was described. Ion association constants, K_ass, between anthraquinone anions and imidazolium cations were determined by analyzing the electrophoretic mobility change of anthraquinone anions using a non-linear least-squares method and factors contributing to ion associability were systematically clarified. For method optimization, several parameters such as ionic liquids concentration, background electrolyte pH and applied voltage, on the separation were evaluated and the optimum conditions were obtained as follows: 90 mM 1-butyl-3-methylimidazolium tetrafluoroborate (pH 11.0) with an applied voltage of 20 kV. Under these conditions, the method has been successfully applied to the determination of anthraquinones in extracts of two kinds of Rhubarb plants (R. palmatum and R. hotaoense) within 12 min. The method proposed herein was shown to be much simpler than the previously reported methods.     

糖类衍生物在毛细管区带电泳下的分离研究

以新合成的1-萘基-3-甲基-5-吡唑啉酮(NMP)为柱前衍生试剂,采用毛细管区带电泳模式考察并优化了糖类衍生物的分离条件。实验采用58.5cm×50μmi.d.毛细管(有效柱长50cm),55mmol/L硼酸盐缓冲溶液(pH9.46),柱温20℃,分离电压22kV,进样10s,在不加任何添加剂的情况下,高效、快速地实现了9种糖的基线分离,并在最优化条件下进行了唐古特白刺实际样品的分离分析,结果令人满意。     

Chiral separation of cetirizine by capillary electrophoresis

Chiral separation of cetirizine, a second-generation H(1)-antagonist, was studied by CD-mediated CE. Several parameters, including pH, CD type, buffer concentration, type of co-ion, applied voltage and temperature, were investigated. The best conditions for chiral separation were obtained using a 75 mM triethanolamine-phosphate buffer (pH 2.5) containing 0.4 mg/mL heptakis(2,3-diacetyl-6-sulfato)-beta-CD and 10% ACN. Online UV detection was performed at 214 nm, a voltage of 20 kV was applied and the capillary was temperature controlled at 25 degrees C by liquid cooling. Hydrodynamic injection was performed for 1 s. The method was validated for the quantification of levocetirizine in tablets and for enantiomeric purity testing of the drug substance. Selectivity, linearity, LOD and LOQ, precision and accuracy were evaluated for both methods. The amount of levocetirizine dihydrochloride in the commercially available tablets was quantified and was found to be within the specification limits of the claimed amount (5 mg). The amount of distomer in levocetirizine drug substance was found to be 0.87 +/- 0.09% w/w, which is in agreement with the certificate of analysis supplied by the company.