半导体可饱和吸收镜启动克尔透镜锁模机理的实验研究

对采用腔内新型宽带半导体可饱和吸收镜(SESAM)掺钛蓝宝石激光器中的启动克尔透镜锁摸(KLM)的机理进行了实验研究.讨论了SESAM在阻挡恢复过程中,启动锁模时间与其他因素的关系.获得了SESAM启动KLM过程较为完整的物理图像,并对其机理进行了分析和讨论.     

利用SBR实现自启动锁模钛宝石飞秒激光脉冲的产生

利用国内生长的低损耗双量子阱结构的可饱和布拉格反射器在掺钛蓝宝石激光器中实现了可饱和吸收体被动锁模、孤子锁模和KLM锁模状态的自启动稳定运转.当抽运功率为4.5W时，用啁啾镜进行色散补偿，获得了18fs的KLM锁模脉冲，输出功率为150mW. 关键词： 可饱和布拉格反射器 啁啾镜 飞秒 钛宝石激光器     

A diode-pumped, self-starting, all-solid-state self-mode-locked Cr:LiSGAF laser

In this paper, a self-starting, diode-pumped self-mode-locked Cr:LiSGAF laser, which produced a stable pulse train of 45 fs duration with about 20 mW-average power at the repeated rate of 90 MHz, was presented. Self-mode-locked operation can be obtained whether there is the semiconductor saturable absorber mirror (SESAM) in the Cr:LiSGAF laser cavity or not, and with the SESAM in the cavity, the self-mode-locked operation could self-start. The shortest pulses, as short as 38 fs, which were not very stable, were obtain with the SESAM in the cavity.     

Gires-Tournois干涉镜补偿色散的自启动飞秒Cr4+:YAG激光器实验研究

利用一片GTI镜补偿腔内色散,并使用宽带半导体可饱和吸收片,实现了锁模自启动的飞秒Cr⁴⁺:YAG激光输出.在9W平均功率的1030nm激光抽运下,获得输出脉冲功率为95 mW,光谱半高全宽45 nm,中心波长1508 nm,实测脉冲宽度为65 fs.     

低阈值掺钛蓝宝石激光器实验研究

结合特殊的谐振腔设计和半导体可饱和吸收镜，建成了一台低阈值的自启动掺钛宝石激光器 . 分别用3％和12％的输出耦合镜，获得了阈值低至390mW和600mW的稳定锁模脉冲输出. 采 用12％输出耦合镜，在12W抽运时，输出平均功率为114mW，对应的典型脉宽为17fs，谱宽 为47nm. 相对于以往的低阈值克尔透镜锁模激光器，锁模工作的范围区域加宽，减小了操作 难度，提高了稳定性. 关键词： 低阈值 半导体可饱和吸收镜 克尔透镜锁模 掺钛蓝宝石激光器     

全光纤超短脉冲掺Yb3+光纤环形激光器

讨论了自启动被动锁模掺Yb³⁺光纤环形激光器产生短脉冲的机理，并研制出全光纤结构超短脉冲掺Yb³⁺光纤环形激光器.采用两个976nm半导体激光器级联抽运作为抽运源，高掺杂浓度掺Yb³⁺光纤作为增益介质，利用光纤的非线性偏振旋转效应，得到自启动、十分稳定的ps量级锁模光脉冲.激光器锁模阈值功率260mW，输出功率25mW，锁模光脉冲中心波长1056nm，3dB带宽11.7nm，重复频率20MHz.与其他结构光纤激光器相比，这种全光纤结构具有更高的效率和更好的稳定性. 关键词： 环形光纤激光器 3+光纤')" href="#">高掺杂浓度掺Yb³⁺光纤 自启动 被动锁模     

用BBO倍频晶体作为腔内自聚焦元件的自锁模钛宝石激光器

本文首先从二次谐波产生(SHG)过程中的一对耦合波方程出发,在理论上得到了当基波光以接近相位匹配的角度穿过倍频晶体时会产生自聚焦效应,并用类比方法得到了BBO晶体相应的非线性折射率系数.在实验上,据我们所知首次将BBO倍频晶体作为独立自聚焦元件用到了钛宝石激光器中,获得了一台较腔内不加晶体时的锁模阈值明显减小、锁模稳定性明显提高且具有自启动能力的自锁模钛宝石激光器.     

利用啁啾脉冲光谱滤波和非线性偏振旋转技术实现高稳定性和开机自启动的全光纤掺Yb~(3+)光纤锁模激光器

建立理论模型,讨论了非线性偏振旋转全光纤锁模激光器的锁模过程、谐波过程以及导致激光器锁模运行难以稳定的影响因素.讨论了采用啁啾脉冲光谱滤波产生脉冲自振幅调制、增加激光器锁模稳定性和自启动能力的机理以及非线性偏振旋转与啁啾脉冲光谱滤波相结合实现锁模的物理过程和脉冲演化过程.研制出全光纤结构的超短脉冲掺Yb~(3+)光纤环形激光器,采用非线性偏振旋转和啁啾脉冲光谱滤波相结合的锁模技术,实现了激光器锁模的开机自启动和高稳定运行.对激光器进行了长期运行稳定性、锁模开机自启动能力、锁模输出参数可重复性监测.锁模脉冲中心波长1052.9 nm,谱宽9.1 nm,脉冲能量4.25 nJ,脉冲宽度17.8 ps.运行期间,各参数波动均小于0.3%.开机自启动能力和可重复性测试显示,激光器可实现一键自启动,启动后各参数可重复精度在0.55%以内.     

被动谐波锁模Er3+/Yb3+共掺双包层光纤环形腔激光器

 为了实现高重复频率和高功率的光脉冲,实验采用Er³⁺/Yb³⁺共掺双包层光纤作为增益介质,稳定的中心波长为976 nm的高功率半导体激光器作为泵浦源,利用非线性偏振旋转锁模技术,得到稳定的自起振锁模光脉冲。当泵浦功率为2.4 W时,激光器输出重复频率为8.829 MHz的连续锁模光脉冲,平均输出功率为52.5 mW,自起振锁模泵浦阈值功率为0.6 W,并观测到了稳定的高阶谐波锁模、调Q和调Q-锁模光脉冲输出。     

掺Yb3+双包层大模场面积光纤锁模激光器

报道了一种结构简单、运转稳定并可以输出高脉冲能量的被动锁模光纤激光器.激光器的增益介质为掺Yb³⁺双包层大模场面积光纤,具有非常低的非线性系数.利用非线性偏振旋转效应和半导体可饱和吸收镜结合实现自启动锁模,获得了平均功率为160mW、重复频率为55.9MHz(对应于3nJ的单脉冲能量)、脉冲宽度为10.6ps的激光脉冲输出. 关键词： 大模场面积光纤 光纤激光器 锁模     

飞秒被动锁模环形腔掺Er3＋光纤激光器

在考虑增益、损耗、群速度色散、自相位调制、快速可饱和吸收体等各种参数同时作用情况下，分析了非线性偏振旋转效应自启动锁模机理，研究了腔体参数与锁模脉冲之间的关系，并给出飞秒被动锁模环形腔掺Er3＋光纤激光器实验原理。实验采用性能稳定的980nm半导体激光器作为抽运源，高掺杂短长度掺Er3＋光纤作为增益介质，利用非线性偏振旋转锁模技术，得到了稳定的飞秒自起振锁模光脉冲。抽运功率为23mW时，激光器输出锁模脉冲中心波长1552nm，3dB带宽为7.6nm，重复频率14.0MHz，平均输出功率0.43mW，自起振锁模泵浦阈值功率11.5mW,并观测到了稳定的高阶锁模脉冲输出。该激光器与报道过的相同结构光纤激光器相比,自起振泵浦阈值低、脉冲能量高、稳定性好，且频谱边带幅度小。     

Cavity Q switching in a solid-state laser with the use of a self-generated holographic feedback

The parameters of a self-starting Nd:YAG laser with an electrooptic shutter have been studied experimentally, and the possibility of applying this laser to pump an optical parametric oscillator has been analyzed. Spatial and frequency selection in the self-starting laser is shown to be important.     

LD Pumped Q-Switching and Self-starting Mode-locked All Fiber Laser

ＬＤＰｕｍｐｅｄＱ－ＳｗｉｔｃｈｉｎｇａｎｄＳｅｌｆ－ｓｔａｒｔｉｎｇＭｏｄｅ－ｌｏｃｋｅｄＡｌｌＦｉｂｅｒＬａｓｅｒ￥ＺＨＡＮＧＪｉａｎ；ＬＩＪｉｎｇｈｕｉ；ＪＩＡＮＧＸｉｎｇ；ＬＩＵＸｉａｏｍｉｎｇ；ＰＥＮＧＪｉａｎｇｄｅ（Ｄｅｐａｒｔｍｅｎｔｏ...     

基于高能量耗散型脉冲掺铒光纤激光器的实验研究

在正色散掺铒光纤激光器中,利用非线性偏振旋转技术实现自启动锁模,得到了具有极大光谱宽度的高能量、无波分裂耗散型脉冲.该耗散型脉冲的形成是腔内增益、损耗、非线性偏振旋转、正色散和其他非线性效应等共同作用的结果,其形成机理与传统的负色散激光器完全不同.当抽运功率为500mW时,该类型脉冲的光谱覆盖了1530—1660nm范围,半高全宽光谱宽度可达42nm以上.脉冲具有极大的正啁啾,其时间带宽积为483,而单脉冲总能量最大可达34.4nJ.     

多芯光子晶体光纤锁模激光器

实验研究了基于掺Yb多芯大模场面积光子晶体光纤的全正色散锁模激光器.增益光纤的18个纤芯呈六角阵列排布,等效的模场直径约为52 μm.激光器基于σ腔结构,腔内没有色散补偿元件,通过半导体可饱和吸收镜实现锁模的自启动.实验获得了平均功率为3.3 W,脉冲宽度为4.92 ps,重复频率为44.68 MHz的锁模脉冲输出,对应的单脉冲能量为74 nJ,脉冲经腔外光栅对压缩为780 fs. 关键词： 光子晶体光纤 多芯 光纤激光器 全正色散     

Generation of 207-femtosecond pulses from a ytterbium figure-of-eight fibre laser

We report the generation of 207-fs pulses with 1.2mW average power at 1036nm directly from a passively mode-locked Yb-doped fibre laser with a nonlinear optical loop mirror for mode-locking and pairs of diffraction gratings for intracavity dispersion compensation. These results imply a 4-fold reduction in pulse duration over previously reported figure-of-eight cavity passively mode-locked Yb-doped fibre lasers. Stable pulse trains are produced at the fundamental repetition rate of the resonator, 24.0MHz. On the other hand, this laser offers a cleaner spectrum and greater stability and is completely self-starting.     

Kerr Lens Mode-locked Operation of Yb:KYW Laser

Using a modified ABCD-matrix approach accounting for nonlinear refraction in active medium,the ranges of cavity parameters that provide a mode-locking of Yb∶KYW-laser in usual z-fold cavity configuration are determined.Taking the cavity parameters that provide a most efficient mode locking and based on fluctuation model,a numerical simulation of laser operation is performed.In the calculations the side-band pump power of 6W at 982 nm is used in 1 cm length KYW crystal with 1 cm×0.005 cm beam cross section.Calculations show that self-starting operation is possible with these parameters and dispersion compensation allows for bandwidth-limited ultrashort pulse generation.The shortest pulse duration was determined to be about 200 fs with self-starting buid-up time of 130 μs.Such a built-up time is comparable and even shorter than that one for the lasers with semiconductor saturable absorbers.The region of negative dispersion provided by prism pair for a stable ultrashort pulse generation was determined to be (-17000～-42000)fs2.     

二极管端面泵浦的附加脉冲锁模的Nd：YLF激光器

研究了二极管端面泵浦的附加脉冲锁模的Ｎｄ：ＹＡＧ激光器并分析了脉冲压缩原理及自启动机制,在最大泵浦功率为２．４Ｗ时,得到重复频率为１３４ＭＨｚ、脉宽为２ｐｓ、有效输出功率７６ｍＷ、相应峰值继２８３Ｗ、波长为１．０５３μｍ、波长为１．０５３μｍ的稳定的连续模脉冲序列。     

Self-starting 6.5-fs pulses from a Ti:sapphire laser

We demonstrate self-starting 6.5-fs pulses from a Kerr-lens mode-locked Ti:sapphire laser with 200-mW average output power at a pulse repetition rate of ~86 M Hz. This is to our knowledge the shortest pulse ever generated directly from a laser. For dispersion compensation we used a prism pair in combination with double-chirped mirrors, which balances the higher-order dispersion of the prism pair and therefore flattens the average total group-delay dispersion in the laser cavity. For self-starting mode locking we used a broadband semiconductor saturable-absorber mirror.     

Self-starting five optical cycle pulse generation in Cr<Superscript>4+</Superscript>:YAG laser

We report stable self-starting near-transform-limited 26-fs pulses at 250-mW output power from a Kerr-lens mode-locked (KLM) Cr⁴⁺:YAG laser using chirped mirrors in combination with prisms. The highest output power achieved in KLM regime was 600 mW at 55-fs pulse duration. The experimental results agree well with the results of theoretical analysis with respect to KLM self-starting ability and stability against continuous-wave and multi-pulse operation. Parameter ranges for stable transform-limited KLM pulses as well as the shortest achievable pulse durations are established. Using an InGaAs-InP semiconductor saturable absorber mirror we could obtain self-starting 57-fs pulses at the average output power of 200 mW. Two-photon absorption was found to be the main mechanism favoring the multiple-pulse operation. Received: 2 May 2002 / Revised version: 16 July 2002 / Published online: 8 January 2003 RID="*" ID="*"Corresponding author. Fax: +43-1/58801-38799, E-mail: sorokina@tuwien.ac.at