Phosphine Ligands in the Palladium‐Catalysed Methoxycarbonylation of Ethene: Insights into the Catalytic Cycle through an HP NMR Spectroscopic Study

Novel cis‐1,2‐bis(di‐tert‐butyl‐phosphinomethyl) carbocyclic ligands 6 – 9 have been prepared and the corresponding palladium complexes [Pd(O₃SCH₃)(L‐L)][O₃SCH₃] (L‐ L=diphosphine) 32 – 35 synthesised and characterised by NMR spectroscopy and X‐ray diffraction. These diphosphine ligands give very active catalysts for the palladium‐catalysed methoxycarbonylation of ethene. The activity varies with the size of the carbocyclic backbone, ligands 7 and 9 , containing four‐ and six‐membered ring backbones giving more active systems. The acid used as co‐catalyst has a strong influence on the activity, with excess trifluoroacetic acid affording the highest conversion, whereas excess methyl sulfonic acid inhibits the catalytic system. An in operando NMR spectroscopic mechanistic study has established the catalytic cycle and resting state of the catalyst under operating reaction conditions. Although the catalysis follows the hydride pathway, the resting state is shown to be the hydride precursor complex [Pd(O₃SCH₃)(L‐ L)][O₃SCH₃], which demonstrates that an isolable/detectable hydride complex is not a prerequisite for this mechanism.     

Air- and moisture-stable cationic (diphosphine)palladium(II) complexes as hydroamination catalysts: X-ray crystal structures of two [(diphosphine)Pd(NCMe)(OH2)]2+[OTf]−2 complexes

A series of cationic (diphosphine)palladium(II) complexes have been prepared and fully characterized, including two crystal structures. These complexes were evaluated as catalysts for the hydroamination of acyclic alkenes. The reactivity of the catalysts is dependent on the nature of the diphosphine ligand and the substituents on the amine and alkene substrates.     

Silica-supported polymeric palladium (0) complexes as catalysts for Heck reaction in organic synthesis

Silica-supported palladium (0) complexes have been prepared from γ-chloropropyl triethoxysilica and γ-aminopropyl triethoxysilica via immobilization on fumed silica, followed by reacting with ethylenediamine and salicylaldehyde, and then the reaction with palladium chloride in ethanol and reduction with KBH₄ in ethanol. They are efficient catalysts for Heck reaction of aryl iodides with alkene at 90^oC. These polymeric palladium (0) catalysts can be recovered and reused without loss in activity. This revised version was published online in June 2006 with corrections to the Cover Date.     

Effect of chloride ions on allylic diphosphine palladium (II) complexes: NMR characteristics and chemical reactivity

A systematic study of the effect of chloride ions on the NMR characteristics of several cationic diphosphine η³-allyl palladium complexes has revealed in some instances a deshielding of the protons. Chloride ions also enhance the reactivity of the complexes. Thus 〚(Me-Duphos)(1,3-diphenylallyl)palladium〛chloride leads mostly to 〚(Me-Duphos)dichloropalladium〛 and to chalcone at room temperature, whereas at low temperature a pair of cationic and anionic allyl palladium complexes is obtained.     

Synthesis and catalytic application of Pd complex catalysts: Atom‐efficient cross‐coupling of triarylbismuthines with haloarenes and acid chlorides under mild conditions

Palladium‐catalysed cross‐coupling reactions are some of the most frequently used synthetic tools for the construction of new carbon–carbon bonds in organic synthesis. In the work presented, Pd(II) complex catalysts were synthesized from palladium chloride and nitrogen donor ligands as the precursors. Infrared and ¹H NMR spectroscopic analyses showed that the palladium complexes were formed in the bidentate mode to the palladium centre. The resultant Pd(II) complexes were tested as catalysts for the coupling of organobismuth(III) compounds with aryl and acid halides leading to excellent yields with high turnover frequency values. The catalysts were stable under the reaction conditions and no degradation was noticed even at 150°C for one of the catalysts. The reaction proceeds via an aryl palladium complex formed by transmetallation reaction between catalyst and Ar₃Bi. The whole synthetic transformation has high atom economy as all three aryl groups attached to bismuth are efficiently transferred to the electrophilic partner.     

SCS-pincer palladium-catalyzed auto-tandem catalysis using dendritic catalysts in semi-permeable compartments

Novel monometallic and dendritic SCS-pincer palladium complexes 2, 3 and 4 have been synthesized in good yields (60-89%) and high purity (palladium loading >97%). These complexes were successfully used as catalysts in the stannylation of cinnamyl chloride with hexamethylditin and in the catalytic auto-tandem reaction consisting of this stannylation followed by an electrophilic addition with 4-nitrobenzaldehyde, showing similar reaction rates and selectivities for all complexes. Dendritic complex 4 has furthermore been used in the compartmentalized catalysis of single and auto-tandem reactions, allowing catalyst reuse for four consecutive runs.     

Synthesis and Characterization of Novel Aminophosphine Ligands Based on Ferrocenodecaline Backbones

 Novel aminophosphine ligands for enantioselective transition metal catalysts based on different ferroceno cis- and trans-decaline backbones were synthesized and structurally characterized. Their palladium dichloride complexes were tested in the asymmetric Grignard cross coupling reaction of vinyl bromide and phenylethyl magnesium chloride, but only very low enantioselectivities were obtained. Steric strain in the aminophosphine ligands causes a severe backbone deformation and in addition leads to a slowed rotation of the respective dimethylamino group as was detected by variable temperature NMR spectroscopy.     

A new pathway for hydroamination. Mechanism of palladium-catalyzed addition of anilines to vinylarenes

The mechanism of the hydroamination of vinylarenes with anilines catalyzed by phosphine-ligated palladium triflates was uncovered. eta3-Arylethyl diphosphine palladium triflate complexes, which result from migratory insertion of vinylarene into a palladium hydride triflate, were shown to be the resting state of the catalytic cycle. A series of these complexes has been isolated and fully characterized. The [(R)-Tol-BINAP][1-(2-naphthyl)ethyl]palladium triflate derivative 1a was crystallographically characterized. This complex reacted with aniline to form the N-phenethylaniline product in 83% yield. Reaction of the benzylic derivative [(R)-Tol-BINAP](eta3-benzyl)palladium triflate with aniline also formed the N-benzylaniline product in a high 87% yield. Predominant inversion of configuration from the reaction between 1a, which is enantiopure, and aniline showed that external attack of the amine on the eta3-arylethyl ligand occurred to form the product. This product from reaction of aniline with 1a is the opposite enantiomer to that obtained from the catalytic process. Thus, a minor diastereomer gives the major enantiomer in the catalytic cycle, and the major diastereomer gives the minor enantiomer. Consistent with this assertion, kinetic studies showed that the major diastereomer formed product with a rate constant roughly 3.5 times slower than the rate constant for the catalytic process that contains all diastereomers.     

Synthesis and Characterization of Novel Aminophosphine Ligands Based on Ferrocenodecaline Backbones

Summary.  Novel aminophosphine ligands for enantioselective transition metal catalysts based on different ferroceno cis- and trans-decaline backbones were synthesized and structurally characterized. Their palladium dichloride complexes were tested in the asymmetric Grignard cross coupling reaction of vinyl bromide and phenylethyl magnesium chloride, but only very low enantioselectivities were obtained. Steric strain in the aminophosphine ligands causes a severe backbone deformation and in addition leads to a slowed rotation of the respective dimethylamino group as was detected by variable temperature NMR spectroscopy. Received January 4, 2002. Accepted January 16, 2002     

Effect of Steric and Electronic Properties of Palladium Complexes with Bidentate Diphosphine Ligands on the Basis of Diphenyl Oxide on Arylation of Amines

New complexes of palladium chloride with bidentate diphosphine ligands on the basis of 2,2′-bis(diorganylphosphino)diphenyl oxides were prepared by three methods, and their catalytic activity in arylation of amines was studied.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 2, 2005, pp. 233–238.Original Russian Text Copyright © 2005 by Veits, Mutsenek.     

Hydroalumination of cycloolefins by diisobutylaluminum hydride catalyzed by zirconium compounds

Conclusions Zirconium chloroalkoxides are effective catalysts for the hydroalumination of cycloolefins by diisobutylaluminum hydride.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 669–673, March, 1982.     

New palladium (II) complexes containing phosphine‐nitrogen ligands and their use as catalysts in aminocarbonylation reaction

Aminocarbonylation of aryl halides, homogeneously catalysed by palladium, is an efficient method that can be employed for obtaining amides for pharmaceutical and synthetic applications. In this work, palladium (II) complexes containing P^N ligands were studied as catalysts in the aminocarbonylation of iodobenzene in the presence of diethylamine. Two types of systems were used: a palladium (II) complex formed in situ; and one prepared prior to the catalytic reaction. In general, the palladium complexes studied achieved high conversions in an average reaction time of less than 2 hr, which is less than that for the standard system (Pd (II)/PPh₃) used. The pre‐synthesized complexes were faster than their in situ counterparts, as the latter require an induction time to form the Pd/P^N species. The structure and electronic properties of the ligand P^N can influence both the activity and the selectivity of the reaction, stabilizing the acyl‐palladium intermediates formed in a better manner.     

Preparation and some reactions of 3,5:8,10-di-1,3-benzo[8](3,4)-1,2,5-thiadiazolocyclophane

Titled 1,2,5-thiadiazolometacyclophane 1 was prepared via thia[2.3]cyclophane 5 which was obtained by the reaction of di(bromomethyl) 2 with sodium sulfide under phase-transfer-catalyzed conditions. Cyclophane 1 gave the corresponding pyrene derivatives by the oxidative transannular reaction in the reaction with brominating reagent. Reduction of 1 with lithium aluminum hydride followed by acetylation with acetic anhydride gave a 4:l-mixture of cis- and trans-diamide 11 and 12 with a trace amount of cyclophane-ring-cleaved product 13 . On the other hand, 13 was obtained as a major product in the reduction with metal sodium and diisobutylaluminum hydride.     

Complexation between α-alkenylaluminum compounds and diisobutylaluminum hydride: The nature of organoaluminum intermediates responsible for the inhibited hydralumination of alkynes

In order to understand the nature of organoaluminum intermediates encountered in the hydralumination of alkynes, NMR spectral and kinetic studies have been carried out on the alkenyl(dialkyl)aluminum systems (I) resulting from the addition of diisobutylaluminum hydride to 4-octyne and to di-t-butylacetylene. A kinetic study of the reaction of a 1/1 mixture of I and diisobutylaluminum hydride with 5-decyne at 50° followed the rate expression v = k(5-decyne)^1.0 (AlH)^0.5. The E^X (apparent) was 23.0 kcal/mole.The aluminum adducts of 4-octyne with one or two equivalents of diisobutylaluminum hydride did not show any temperature-dependence in their NMR spectra. However, those derived from di-t-butylacetylene did reveal the existence of several components, both for the alkenyl(dialkyl)aluminum itself, as well as for the 1/1 admixture of the alkenyl(dialkyl)aluminum with diisobutylaluminum hydride. However, in the temperature range of hydralumination, namely 50°, the diisobutyl(E-4-octenyl)aluminum was shown to be in equilibrium, with triisobutylaluminum.A proposed rationale for the NMR spectral data, formulated with the aid of data from model systems such as bis(E-4-octenyl)aluminum hydride, also offers an insight into the nature and kinetic behavior of organoaluminum intermediates in the hydralumination reaction.     

Flow-Injection Study and Analytical Applications of the Reactions of Palladium(II) and Platinum(IV) with Tin(II) Chloride in Hydrochloric Acid Solutions

The interaction of palladium(II) and platinum(II) with tin(II) chloride in hydrochloric acid solutions was studied by flow-injection (FI) spectrophotometry. It was found using kinetic measurements in the stopped flow mode that the composition of detected products and the rate of their formation depend on the concentrations of tin(II) and chloride ions in the reaction zone and on the acidity of the solution. Optimal FI conditions were found, and the selectivity of interaction of palladium(II) with tin(II) chloride was estimated for the detection of the signal at 407 nm (yellow form) and 646 nm (green form). It was demonstrated that the reaction of the formation of yellow platinum(IV) complexes is slower than that for palladium(II), especially at rather low concentrations of hydrochloric acid in the reaction flow. Based on the detection of green complexes of palladium(II) with tin(II) chloride, a flow injection method was proposed for the selective spectrophotometric determination of palladium(II) in the presence of other platinum-group metals. The height of the recorded peak is directly proportional to the concentration of palladium(II) in the injected solution in the range of 0.028–0.300 mM. The method was used for the analysis of pharmaceuticals and industrial catalysts.     

New palladium catalyst immobilized on epoxy resin: synthesis,characterization and catalytic activity

A new thiol‐functionalized epoxy resin as a support for palladium(II) complexes has been synthesized in good yields. A palladium catalyst was ‘heterogenized’ by anchoring [PdCl₂(PhCN)₂] complexes to these thiol‐functionalized polymers via ligand exchange reaction. These new palladium catalysts were tested in Mizoroki–Heck coupling and hydrogenation reactions. The activity of the complexes in terms of yield is comparable to that of homogeneous PdCl₂(PhCN)₂. The stability and a good recycling efficiency of these catalysts make them useful for prolonged use. The constant and good selectivity of the supported catalysts during recycling experiments indicate that they could be useful for practical application in many organic reactions. To characterize the heterogeneous complexes before and after use, X‐ray photoelectron spectroscopy, infrared spectroscopy, scanning electron microscopy, energy dispersive X‐ray microscopy, atomic absorption spectroscopy and time‐of‐flight secondary ion mass spectrometry were applied. Density functional theory calculations were also used to better understand the structures of the obtained palladium complexes. Polythiourethanes contain three atoms, oxygen, nitrogen and sulfur, capable of coordinating to transition metals. We examined the possibility of intra‐ and intermolecular binding for both cis and trans palladium complexes. Copyright © 2015 John Wiley & Sons, Ltd.     

Chloride‐Bridged Dinuclear Rhodium(III) Complexes Bearing Chiral Diphosphine Ligands: Catalyst Precursors for Asymmetric Hydrogenation of Simple Olefins

Efficient rhodium(III) catalysts were developed for asymmetric hydrogenation of simple olefins. A new series of chloride‐bridged dinuclear rhodium(III) complexes 1 were synthesized from the rhodium(I) precursor [RhCl(cod)]₂, chiral diphosphine ligands, and hydrochloric acid. Complexes from the series acted as efficient catalysts for asymmetric hydrogenation of (E)‐prop‐1‐ene‐1,2‐diyldibenzene and its derivatives without any directing groups, in sharp contrast to widely used rhodium(I) catalytic systems that require a directing group for high enantioselectivity. The catalytic system was applied to asymmetric hydrogenation of allylic alcohols, alkenylboranes, and unsaturated cyclic sulfones. Control experiments support the superiority of dinuclear rhodium(III) complexes 1 over typical rhodium(I) catalytic systems.     

Piperazine‐ and DABCO‐bridged dinuclear N‐heterocyclic carbene palladium complexes: synthesis,structure and application to Hiyama coupling reaction

Four dinuclear N ‐heterocyclic carbene (NHC) palladium complexes were prepared by reaction of imidazolinium salts, PdCl₂ and bridging ligands (piperazine and DABCO) in one pot or by direct cleavage of the chloro‐bridged dimeric compounds [Pd(μ ‐Cl)(Cl)(NHC)]₂ with bridging ligands. All of the complexes were fully characterized using ¹H NMR, ¹³C NMR, high‐resolution mass and infrared spectroscopies, elemental analysis and single‐crystal X‐ray diffraction. The catalytic activities of the obtained palladium catalysts towards Hiyama coupling of aryl chlorides with phenyltrimethoxysilane were investigated and the results showed that the dinuclear palladium complexes were considerably active for the coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

The first stable mononuclear silyl palladium hydrides

The reaction of tertiary silanes with the low valent palladium complex [(mu-dcpe)Pd]2 affords equilibrium mixtures with mononuclear silyl palladium hydrides. These complexes have been characterized by NMR spectroscopy and, in one case, by X-ray crystallography. The silyl palladium hydride complexes rapidly interchange silicon and hydride coordination environments in solution which give rise to extraordinary temperature-dependent kinetic isotope effects for the fluxional process. An intermediate 2eta-Si-H complex is proposed for the interchange.     

Synthesis,crystal structures,and catalytic activities of palladium imidazole complexes formed by 2-hydroxyethyl group cleavage

N-4,6-dimethyl-2-pyrimidinylimidazole 1 and its hydroxyethyl derivative 1-(2-hydroxyethyl)-3-(4,6-dimethyl-2-pyrimidinyl)imidazolium chloride 2 have been synthesized and characterized. The attempted synthesis of bis(N-heterocyclic carbene)palladium complexes via the direct reaction of 2 with Pd(OAc)₂ results in the unexpected formation of a bis(N-arylimidazole) palladium complex 3. Additionally, the analogous bis(N-methylimidazole) palladium complex 4 has also been synthesized by the above method. Compounds 1–4 were characterized by elemental analysis, IR, and ¹H NMR. Additionally, their crystal structures have been determined by X-ray diffraction. Complexes 3 and 4 were found to be efficient catalysts for the Suzuki reaction.