Preliminary investigation of the application of on-line membrane extraction of trifluoroacetic acid as an aid to improvement of negative ion electrospray mass spectrometry data

We have recently investigated the biodegradation of a number of acidic aromatic compounds that give excellent chromatography using trifluoroacetic acid (TFA) based HPLC methods. Unfortunately HPLC methods using TFA are not usually compatible with detection by negative ion mass spectrometry as TFA suppresses ionisation of the analyte during the electrospray process. We present a preliminary investigation of the use of an anion-exchange micro-membrane suppressor to remove TFA on-line post column with the aim of improvement of mass spectral data using an aromatic acid as an example, Thus LC-MS using a TFA based HPLC method with negative ion mass spectral detection is shown to be possible with good sensitivity.     

pharmaceutical and biological samples using modified multiwall carbon nanotubes paste electrode

A carbon paste electrode(CPE) chemically modified with multiwall carbon nanotubes and ferrocene(FC) was used as a selective electrochemical sensor for the simultaneous determination of trace amounts of cysteamine(CA) and folic acid(FA).This modified electrode showed very efficient electrocatalytic activity for the anodic oxidation of CA.The peak current of differential pulse voltammograms of CA and FA increased linearly with their concentration in the ranges of 0.7-200μmol/L CA and 5.0- 700μmol/L FA.The detection limits for CA and FA were 0.3μmol/L and 2.0μmoI/L,respectively.The diffusion coefficient(D) and transfer coefficient(α) of CA were also determined.These conditions are sufficient to allow determination of CA and FA both individually and simultaneously.     

Design of luminescent biochips based on enzyme,antibody, or DNA composite layers

The use of beads bearing bioactive molecules to develop generic biochips based on chemi- and electro-chemiluminescent detection was evaluated. The biochips were composed of arrayed biosensors, including enzyme-charged beads, antigen-charged beads, or oligonucleotide-charged beads, entrapped in poly(vinyl alcohol) (PVA-SbQ) photopolymer. In each case the sensing layers were spotted at the surface of a glassy carbon electrode as 0.3 µL drops, generating 500–800 µm spots. The luminescent reactions were either catalysed by horseradish peroxidase or triggered by application of a +850 mV potential between the glassy carbon electrode and a platinum pseudo-reference. Enzyme biochips were designed for the concomitant detection of choline, glucose, glutamate, lactate, lysine, and urate, based on the corresponding oxidase-charged beads and the electro-chemiluminescent (ECL) reaction with luminol-immobilised beads of the hydrogen peroxide produced. Limits of detection of 1 µmol L^–1 for glutamate, lysine and uric acid, 20 µmol L^–1 for glucose, and 2 µmol L^–1 for choline and lactate were found with detection ranging over three decades at least. Use of the electro-chemiluminescent biochip was extended to a tri-enzymatic sensing layer based on kinase-oxidase activity for detection of acetate. A reaction sequence using acetate kinase, pyruvate kinase, and pyruvate oxidase enabled the production of H₂O₂ in response to acetate injection in the range 10 µmol L^–1 to 100 mmol L^–1. Based on IgG-bearing beads, a chemiluminescent immuno-biochip has been also realised for the model detection of human IgG. Biotin-labelled anti-human IgG were used in a competitive assay, in conjunction with peroxidase-labelled streptavidin. Free antigen could then be detected with a detection limit of 25 pg (10⁸ molecules) and up to 15 ng. In a similar way, the use of oligonucleotide-immobilised beads enabled the realisation of DNA-sensitive biochips which could be used to detect a biotin-labelled sequence al a level of 5×10⁸ molecules.     

Liquid chromatographic analysis of Hg(II) binding by thiol-rich peptides using both UV–vis and electrochemical detection

An existing method for HPLC determination of thiol-containing peptides has been successfully adapted to the analysis of mixtures of glutathione (GSH) and some related peptides with their Hg(II) complexes as a first approach to the study of phytochelatin extracts. The separation was achieved in a C18 column with a mobile phase of 0.1% trifluoroacetic acid (TFA) and 0.1% TFA/acetonitrile. Non-derivative UV–vis detection at 202 nm used in the original method has been complemented with amperometric detection at 1.2 V on glassy carbon electrode. Two different Hg(II)–GSH complexes were observed by both detection modes and confirmed by mass spectrometry.     

Selective Detection of Peptide-Oligonucleotide Heteroconjugates Utilizing Capillary HPLC-ICPMS

A method for the selective detection and quantification of peptide:oligonucleotide heteroconjugates, such as those generated by protein:nucleic acid cross-links, using capillary reversed-phase high performance liquid chromatography (cap-RPHPLC) coupled with inductively coupled plasma mass spectrometry detection (ICPMS) is described. The selective detection of phosphorus as ³¹P⁺, the only natural isotope, in peptide-oligonucleotide heteroconjugates is enabled by the elemental detection capabilities of the ICPMS. Mobile phase conditions that allow separation of heteroconjugates while maintaining ICPMS compatibility were investigated. We found that trifluoroacetic acid (TFA) mobile phases, used in conventional peptide separations, and hexafluoroisopropanol/triethylamine (HFIP/TEA) mobile phases, used in conventional oligonucleotide separations, both are compatible with ICPMS and enable heteroconjugate separation. The TFA-based separations yielded limits of detection (LOD) of ~40 ppb phosphorus, which is nearly seven times lower than the LOD for HFIP/TEA-based separations. Using the TFA mobile phase, 1–2 pmol of a model heteroconjugate were routinely separated and detected by this optimized capLC-ICPMS method.     

Simultaneous Determination of Major Constituents of Honeybee Venom by LC-DAD

The aim of the study was to develop an LC method for honeybee venom analysis, using cytochrome c as an internal standard. The SynChropack C8 6.5 μm, 4.6 × 100 mm column was applied. The bee venom was separated by linear gradient 5–80% B at 30 min (eluent A—0.1% TFA in water, eluent B—0.1% TFA in acetonitrile:water (80:20)). The flow rate of mobile phase was maintained at 1 mL min⁻¹, injection volume: 40 μL, separation temperature: 25 °C. The analysis was monitored at 220 nm. Several honeybee venom constituents were separated and the content of four of them (apamine, mast cell degranulating peptide, phospholipase A₂ and melittin) were determined. By applying this methodology differences in chemical composition of honeybee venom were evaluated. In order to confirm the data obtained, the following steps and parameters were taken into account for the validation of the method: selectivity, precision (injection repeatability, analysis repeatability), accuracy (recovery), linearity and operating range, limit of detection and limit of quantitation. All steps of validation proved that the developed analytical procedure was suitable for its intended purpose (standardization). Due to its simplicity, the developed method can be easily automated and incorporated into routine operations both in the bee venom identification, quality control and assay tests.     

A novel approach for sensitivity enhancement in atmospheric pressure chemical ionisation liquid chromatography/mass spectrometry of chlorophylls

Differences in the ionisation efficiency of chlorophylls and their phaeophytin counterparts result in lower sensitivity for atmospheric pressure chemical ionisation mass spectrometric detection of the former. Improvement in the sensitivity of detection of chlorophyll of around an order of magnitude at a concentration of 1 x 10(-6)mol L(-1) has been achieved using post-column addition of methanoic acid during analysis by liquid chromatography/mass spectrometry (LC/MS). The method gives linear response and is a simple strategy to improve sensitivity both for LC/MS and LC/MS/MS without loss of information relating to the precise nature of the tetrapyrrole distributions. Detection levels achieved exceed those obtained by absorbance detection.     

UPLC–MS/MS method for the determination of voriconazole plasma concentration from pediatric patients with hematologic tumors: An application toward personalized therapy

Untreated invasive fungal infection is one of the important risk factors affecting the prognosis of pediatric patients with hematologic tumors. Voriconazole (VOR) is the first-line antifungal drug for the treatment of Aspergillus infections. In order to reduce the risk of adverse drug reactions while producing an ideal antifungal effect, therapeutic drug monitoring was performed to maintain the VOR plasma concentration in a range of 1,000–5,500 ng/ml. In the present study, a reliable, accurate, sensitive and quick ultra-high performance liquid chromatograph–tandem mass spectrometry (UPLC–MS/MS) method was developed for the determination of the VOR level. Protein precipitation was performed using acetonitrile, and then the chromatographic separation was carried out by UPLC using a C₁₈ column with the gradient mobile phases comprising 0.1% methanoic acid in acetonitrile (A) and 0.1% methanoic acid in water (B). In the selective reaction monitor mode, the mass spectrometric detection was carried out using an TSQ Endura triple quadruple mass spectrometer. The performance of this UPLC–MS/MS method was validated as per the National Medical Products Administration for Bioanalytical Method Validation. Additionally, the plasma concentrations of VOR in pediatric patients with hematologic tumors were detected using this method, and the analyzed results were used for personalized therapy.     

Simultaneous femtomole determination of cysteine, reduced and oxidized glutathione, and phytochelatin in maize (Zea mays L.) kernels using high-performance liquid chromatography with electrochemical detection

Thiol compounds such as cysteine (Cys), reduced (GSH) and oxidized (GSSG) gluathione, and phytochelatins (PCs) play an important role in heavy metal detoxification in plants. These thiols are biological active compounds whose function is elimination of oxidative stress in plant cells. The aim of our work was to optimise sensitive and rapid method of high-performance liquid chromatography coupled with electrochemical detector (HPLC-ED) for determination of the abovementioned thiol compounds in maize (Zea mays L.) kernels. New approach for evaluation of HPLC-ED parameters is described. The most suitable isocratic mobile phase for the separation and detection of Cys, GSH, GSSG and PC2 consisted of methanol (MeOH) and trifluoroacetic acid (TFA). In addition, the influence of concentrations of TFA and ratio of MeOH:TFA on chromatographic separation and detection of the thiol compounds were studied. The mobile phase consisting from methanol and 0.05% (v/v) TFA in ratio 97:3 (%; v/v) was found the most suitable for the thiol compounds determination. Optimal flow rate of the mobile phase was 0.18 ml min(-1) and the column and detector temperature 35 degrees C. Hydrodynamic voltammograms of all studied compounds was obtained due to the selection of the most effective working electrodes potentials. Two most effective detection potentials were selected: 780 mV for the GSSG and PC2 and 680 mV for determination of Cys and GSH. The optimised HPLC-ED method was capable to determine femtomole levels of studied compounds. The detection limits (3 S/N) of the studied thiol compounds were for cysteine 112.8 fmol, GSH 63.5 fmol, GSSG 112.2 fmol and PC2 2.53 pmol per injection (5 microl). The optimised HPLC-ED method was applied to study of the influence of different cadmium concentrations (0, 10 and 100 microM Cd) on content of Cys, GSH, GSSG and PC2 in maize kernels. According to the increasing time of Cd treatment, content of GSH, GSSG and PC2 in maize kernels increased but content of Cys decreased. Decreasing Cys concentration probably relates with the increasing GSH and phytochelatins synthesis.     

Method development and validation for trifluoroacetic acid determination by capillary electrophoresis in combination with capacitively coupled contactless conductivity detection (CE-C4D)

A method was developed to determine traces of trifluoroacetic acid as impurity in synthetic or semi-synthetic drugs as antibiotics, macropeptides, etc. Capillary electrophoresis in combination with capacitively coupled contactless conductivity detection (CE-C⁴D) was used due to lack of UV absorbance property of trifluoroacetic acid (TFA). The optimized method took less than 1 min with good linearity (R² = 0.9995) for trifluoroacetic acid concentration from 2 to 100 ppm. It also has a good repeatability expressed by the relative standard deviation (% RSD) which is 1.2 and 2.1% for intraday and interday precision, respectively, at 50 ppm TFA, and good sensitivity with 0.34 ppm, 1.2 ppm LOD and LOQ, respectively. In addition, the content of TFA in synthetic drug, was determined using the validated method which gave good linearity (R² = 0.9996) for trifluoroacetic acid spiked into drug in a concentration range of 2-80 ppm, with good intraday repeatability of 2.0%.The analysis is performed in a background electrolyte composed of 20 mM morpholinoethane-sulfonic acid (Mes) and 20 mM l-histidine (l-His) pH 6.1. Cetyltrimethylammonium bromide (CTAB) was added as flow modifier in a concentration (0.2 mM) lower than the critical micellar concentration. Ammonium formate 6 ppm was used as internal standard. The applied voltage was 30 kV in reverse polarity. A fused silica capillary with 75 μm internal diameter and total length 47 cm (31 cm to C⁴D detector and 37 cm to DAD detector) was used.     

A Validated Chiral HPLC Method for the Determination of Enantiomeric Purity of R-β-amino-β-(4-methoxyphenyl) Propionic Acid

A normal phase chiral LC method for chiral purity evaluation of β-amino-β-(4-methoxyphenyl) propionic acid was developed on donor–acceptor (pirkle) column. The chiral stationary phase used was a 250 × 4.6 mm (R, R) Whelk-01 with 5 μm particle size, which was accompanied with a 1 cm long guard column. The “hybrid” pi-electron donor–acceptor based stationary phase (R, R) Whelk-01 was found to be enantiomeric selective for (R) and (S) enantiomers of β-amino-β-(4-methoxyphenyl) propionic acid with a resolution >2.5. The concentration of 2-propanol and TFA in the mobile phase plays an important role on the chrmatographic efficiency and resolution between the enantiomers. The limit of detection and limit of quantification of (S) enantiomer was 0.3 and 1.0 μg mL^-1 for 20 μL injection volume. The percentage RSD of the peak area of six replicate injections of (S) enantiomer at LOQ concentration was 4.5. The percentage recovery of (S) enantiomer from (R) enantiomer samples ranged from 92 to 100. The test solution was observed to be stable up to 24 h after the preparation. The developed method was also checked by different analysts and on different lots of columns, reagents and it was proved to be rugged. The developed normal phase chiral LC method can be used for the determination of the enantiomeric purity of R-β-amino-β-(4-methoxyphenyl) propionic acid.     

Simultaneous separation and determination of thallium in water samples by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry

An analytical method for separation and determination of thallium species in water using high‐performance liquid chromatography with inductively coupled plasma mass spectrometry was developed. The composition and concentration of mobile phase, injection volume, and pH value were optimized respectively with an anion or cation exchange column. The results showed that Tl(I) and Tl(III) were effectively separated using anion exchange column Hamilton PRP‐X100, with the mobile phase consisting of 200 mmol/L ammonium acetate and 10 mmol/L diethylenetriaminepentaacetic acid (pH = 4.2). When using a Dionex cation exchange guard column, CS12A, 15 mmol/L HNO₃, and 3 mmol/L diethylenetriaminepentaacetic acid as the mobile phase, Tl(I) and Tl(III) could be effectively separated. The detection limits of the methods were 3–6 and 9–12 ng/L, respectively. In a solution containing Fe ions and oxalic acid, a significant quantity of Tl(I) was oxidized. Fe ions and oxalic acid in the water samples did not interfere with high‐performance liquid chromatography‐inductively coupled plasma mass spectrometry measurement results.     

A New ‘Off–On’ System Based on Core-Substituted Naphthalene Diimide with Dimethylamine for Reversible Acid–Base Sensing

A new ‘Off–On’ system designed and synthesised by functionalisation of a naphthalene diimide (NDI) core with dimethylamine produces 4,9-bis(dimethylamino)-2,7-dioctylbenzo[lmn][3,8]-phenanthroline-1,3,6,8-(2H,7H)-tetraone, abbreviated as DDPT ( 1 ). DDPT 1 was synthesised using a simple strategy, namely aromatic nucleophilic substitution using Br₂-NDI with dimethylamine at 110 °C. DDPT was characterized by ¹H and ¹³C NMR spectroscopy, ESI mass spectrometry and elemental analysis. DDPT 1 was then used for optical studies through protonation of its dimethylamine core with trifluoroacetic acid (TFA), blue-shifting the absorption band from 600 nm to 545 nm in solution. Interestingly, the fluorescence of DDPT 1 is weak in solution with a quantum yield Φ=0.09, which is significantly enhanced to Φ=0.78 upon addition of TFA. The limit of detection (LOD) was determined to 2.77 nm . Furthermore, DDPT 1 can be used for naked eyed detection not only under UV light (365 nm) but also using visible light, as clear changes can be clearly seen upon addition of TFA. The binding constant of DDPT was calculated to 2.1×10⁻³ m ⁻¹. Importantly, DDPT 1 showed reversible switching by alternative addition of acid (TFA) and base (triethylamine) without loss of activity. Immobilised on paper, DDPT 1 can be used for strip-test sensing in which the colour changes from blue to reddish when expose to TFA vapours and reverse in the presence of triethylamine vapours.     

Stability‐indicating HPLC assay for lysine–proline–valine (KPV) in aqueous solutions and skin homogenates

A simple, sensitive and stability‐indicating high‐performance liquid chromatographic (HPLC) assay method was developed and validated for a bioactive peptide, lysine–proline–valine (KPV) in aqueous solutions and skin homogenates. Chromatographic separation was achieved on a reversed phase Phenomenex C₁₈ column (4.6 × 250 mm, packed with 5 µm silica particles) with a gradient mobile phase consisting of 0.1% trifluoroacetic acid (TFA) in water (A) and 0.1% TFA in acetonitrile (B). The proposed HPLC method was validated with respect to accuracy, precision, linearity, repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The calibration curve was linear with a correlation coefficient (r) of 0.9999. Relative standard deviation values of accuracy and precision experiments were <2. The LOD and LOQ of KPV were 0.01 and 0.25 µg/mL, respectively. Under stress conditions (acid, alkali and hydrogen peroxide) KPV yielded lys–pro–diketopiperazine as major degradation product, which was identified by flow injection MS analysis. The developed HPLC method was found to be efficient in separating the active peptide from its degradation products generated under various stress conditions. Also, the validated method was able to separate KPV from other peaks arising from endogenous components of the skin homogenate. Copyright © 2014 John Wiley & Sons, Ltd.     

Solenoid Micro‐pumps: A New Tool for Sample Introduction in Batch Injection Analysis Systems with Electrochemical Detection

This work presents the use of solenoid micro‐pumps as a new strategy for sample introduction in batch‐injection analysis (BIA). The volume of solution dispensed on each pulse of the solenoid micro‐pump (μL) is used as fixed and reproducible injection volume for BIA. In this system, the injection steps are possible in stopped flow mode resulting in low background noise levels, which would not be possible under continuous flow conditions and using solenoid micro‐pumps. As a proof‐of‐concept, amperometric and square‐wave voltammetric (SWV) determination of dopamine was demonstrated as well as anodic‐stripping voltammetry (ASV) of metals. The micro‐pump provided injections of 14 μL of solution per pulse at 512 μL s⁻¹ over the electrode during electrochemical measurement. Moreover, fast injections of analyte or electrolyte were programmed during deposition or conditioning steps of ASV for analyte preconcentration or electrode cleaning. The proposed system improved limits of detection and sensitivity (2‐fold), precision and sample throughput in comparison with traditional BIA due to enhanced mass transfer and consequent reduced dispersion of analyte, and possible control of injections without analyst intervention. This work opens new possibilities of applications of the BIA system, including on‐line sample treatment (derivatization or dilution steps).     

A sensitive and selective determination method of histamine by HPLC with intramolecular excimer-forming derivatization and fluorescence detection

A highly sensitive, selective and simple method is described for the determination of histamine by high-performance liquid chromatography (HPLC) with fluorescence detection. The method is based on an intramolecular excimer-forming fluorescence derivatization of histamine with 4-(1-pyrene)butyric acid N-hydroxysuccinimide ester (PSE), followed by reversed-phase HPLC. Histamine, having two amino moieties in a molecule, was converted to the dipyrene-labeled derivative by reaction with PSE. The derivative afforded intramolecular excimer fluorescence (450-540 nm), which can clearly be discriminated from the monomer fluorescence (370-420 nm) emitted from PSE. Typically, a 10 micro L sample solution was mixed with 100 micro L of derivatization reagent solution, which was a mixture of 0.5 mm PSE in acetonitrile and 0.5 mm potassium carbonate in water (8:2, v/v). The derivatization was carried out at 100 degrees C for 90 min. The PSE derivative of histamine could be separated by reversed-phase ODS column with isocratic elution using acetonitrile:water (82:18, v/v) containing 0.03% triethylamine. The detection limit (singnal-to-noise ratio = 3) of histamine was 0.5 fmol for a 30 micro L injection. The method was successfully applied to the determination of histamine in human urine, and had enough selectivity and sensitivity for urinary histamine quantification.     

集成核酸提取的实时荧光PCR微全分析系统

集成核酸提取的实时荧光PCR微全分析系统将核酸提取、PCR扩增与实时荧光检测进行整合,在同一块微流控芯片上实现了核酸分析过程的全自动和全封闭,具有试剂用量少、分析速度快、操作简便等优点。本研究采用微机械加工技术制作集成核酸提取微流控芯片的阳极模,使用组合模具法和注塑法制作具有3D通道的PDMS基片,与玻璃基底通过等离子体键合封装成集成核酸提取芯片。构建了由微流体速度可调节(0~10 mL/min)的驱动控制装置、温控精度可达0.1℃的TEC温控平台、CCD检测功能模块等组成的微全分析系统。以人类血液裂解液为样品,采用硅胶膜进行芯片上核酸提取。系统根据设置好的时序自动执行,以2 mL/min的流体驱动速度完成20μL裂解液上样、清洗;以1 mL/min的流体驱动速度完成DNA洗脱,抽取PCR试剂与之混合注入到反应腔。提取的基因组DNA以链上内参基因GAPDH为检测对象,并以传统手工提取为对照,在该系统平台上进行PCR扩增和熔解曲线分析实验。片上PCR扩增结果显示,扩增曲线明显,Ct值分别为25.3和26.9。扩增产物进行熔解曲线分析得到的熔解温度一致,均为89.9℃。结果表明,此系统能够自动化、全封闭的在微流控芯片上完成核酸提取、PCR扩增与实时定量分析。     

Dispersive micro‐solid‐phase extraction combined with online preconcentration by capillary electrophoresis for the determination of glycopyrrolate stereoisomers in rat plasma

A simple and sensitive analytical method for four isomers of glycopyrrolate in rat plasma was developed using cation‐selective exhaustive injection‐sweeping cyclodextrin‐modified electrokinetic chromatography (CSEI‐Sweeping‐CDEKC) for online enrichment combined with dispersive micro‐solid‐phase extraction pretreatment. The CSEI‐Sweeping‐CDEKC was conducted on an uncoated fused silica capillary (40.2 cm × 75 μm) with an applied voltage of –20 kV. The electrophoretic analysis was carried out in 30 mM phosphate solution at pH 2.0 containing 20 mg/mL sulfated‐β‐cyclodextrin and 5% acetonitrile. Under these optimized conditions, the detection limit for racemic glycopyrrolate was found to be 2.0 ng/mL and this method could increase 495‐fold detection sensitivity compared with the traditional injection method. Additionally, the parameters that affected the extraction efficiency of dispersive micro‐solid‐phase extraction were also examined systematically. The glycopyrrolate isomers in rat plasma samples as low as 0.0625 μg/mL were able to be separated and detected by capillary electrophoresis with the aid of CSEI‐sweeping. The findings of this study show that the dispersive micro‐solid‐phase extraction pretreatment coupled with CSEI‐Sweeping‐CDEKC is a rapid and convenient method for analyzing glycopyrrolate isomers in rat plasma.     

Strong Emissive Nanofibers of Organogels for the Detection of Volatile Acid Vapors

Two L ‐phenylalanine derivatives with 5,8‐bis(2‐(carbazol‐3‐yl)vinyl)quinoxaline ( PCQ ) and 5,8‐bis[2‐(carbazol‐3‐yl)]‐2,3‐dimethylquinoxaline ( DCQ ) as fluorophores were synthesized, and their photophysical properties were measured and compared. The two compounds were found to gelate some organic solvents and self‐assemble into 1D nanofibers in gels. The wet gel of PCQ emitted a weak orange fluorescence, but the DCQ gel had a strong green one. This result can be due to the presence of two methyl groups and the nonplanar conformation of fluorophore in DCQ . The gel film of DCQ also showed significantly stronger fluorescence than that of PCQ . Thus, the wet gel and xerogel film of DCQ were selected to study their sensing properties to acids. The yellow wet gel of DCQ transformed into a brown sol upon the addition of 0.2 equiv trifluoroacetic acid (TFA), accompanied by emission quenching. The xerogel film of DCQ rapidly responded to volatile acids, such as TFA, HCl, and HOAc. The fluorescence of the xerogel film was gradually quenched with increased concentration of volatile acid vapors. The fibrous film exhibited low detection limits for volatile acid. The detection limits of the thin films for TFA, HCl, and HOAc reached 43, 122, and 950 ppb, respectively.     

Determination of herbicides in environmental water samples by simultaneous in‐syringe magnetic stirring‐assisted dispersive liquid–liquid microextraction and silylation followed by GC–MS

An on‐line, fast, simple, selective, and sensitive method has been developed for the determination of three herbicides belonging to the following families: triazines (atrazine), chloroacetamide (alachlor), and phenoxy (2,4‐dichlorophenoxyacetic acid) in water samples. The method involves an in‐syringe magnetic stirring‐assisted dispersive liquid–liquid microextraction along with simultaneous silylation prior to their determination by gas chromatography with mass spectrometry. Extraction, derivatization, and preconcentration have been simultaneously performed using acetone as dispersive solvent, N‐methyl‐N‐tert‐butyldimethylsilyltrifluoroacetamide as derivatization agent and trichloroethylene as extraction solvent. After stirring for 180 s, the sedimented phase was transferred to a rotary micro‐volume injection valve (3 μL) and introduced by an air stream into gas chromatograph with mass spectrometry detector. Recovery and enrichment factors were 87.2–111.2% and 7.4–10.4, respectively. Relative standard deviations were in the ranges of 6.6–7.4 for intraday and 9.2–9.6 for interday precision. The detection limits were in the range of 0.045–0.03 μg/L, and good linearity was observed up to 200 μg/L, with R² ranging between 0.9905 and 0.9964. The developed method was satisfactorily applied to assess the occurrence of the studied herbicides in groundwater samples. The recovery test was also performed with values between 77 and 117%.