气质联用仪法测定奶粉中多环芳烃

研究了奶粉中多环芳烃的气相色谱/质谱(GC/MS)测定方法. 样品经甲醇-KOH皂化后用甲苯提取, 提取液经微孔滤膜过滤后用气相色谱质谱仪测定其含量, 外标法定量. 结果16种PAHs的回收率范围为92.0%～106%;RSD为2.2%～4.7%. 方法能同时分离16种PAHs, 适合于奶粉中多环芳烃的分析测定.     

微波萃取-GC/MS联用法测定橡胶及其制品中多环芳烃

建立了微波萃取-GC/MS联用法测定橡胶及其制品中16种多环芳烃(PAHs)的方法,通过实验优化了萃取溶剂、萃取时间、萃取温度等微波萃取条件和16种PAHs的分离和测定条件。用加标回收方法试验确定方法的准确度。结果表明:16种PAHs检出限(S/N=5)为0.002~0.01 mg/L,平均回收率为63.58%~100.5%,RSD为1.9%~9.9%。该方法可以满足橡胶及其制品中多环芳烃的检测要求。     

应用搅拌棒吸附萃取-热脱附-气相色谱/质谱法快速测定滇池水系中的16种多环芳烃

应用搅拌棒吸附萃取(SBSE)-热脱附(TDS)-气相色谱/质谱联用(GC/MS)方法测定了滇池水系(滇池和盘龙江上、中、下游)中16种多环芳烃(PAHs)的含量。方法快速简便,无有机溶剂污染,PAHs的最低检出限为1.0~468.8 pg,理论回收率在90%以上,加标回收率为83.1%~109.4%,相对标准偏差小于10%。测定结果表明,这16种多环芳烃在滇池水样中的含量为89.16 ng/L,在盘龙江上游水样中的含量为65.41 ng/L,在盘龙江中游水样中的含量为339.22 ng/L,而在盘龙江下游水样中的含量为62.25 ng/L,说明滇池水系已经受到一定的PAHs污染,加强对滇池、盘龙江中PAHs有机污染的控制势在必行。     

使用C18固相萃取膜-色质联用定量分析饮用水中痕量多环芳烃的初步研究

参照美国EPA525.1方法,C18-固相萃取膜萃取饮用水中的有机物,利用GC/MS法鉴定多环芳烃(PAHs),使用16种多环芳烃混合标准样绘制标准曲线,以内标法对PAHs进行定量分析.采用本方法研究某水厂经过深度处理后的出厂水中的7种多环芳烃的含量,PAHs的平均回收率为94.0%～97.7%.检测限为0.001μg/L.     

全二维气相色谱-氢火焰离子化检测器定性定量分析柴油中的多环芳烃

提出了全二维气相色谱-氢火焰离子化检测器(GC×GC-FID)定性定量分析柴油中多环芳烃的方法。利用全二维气相色谱-飞行时间质谱法(GC×GC-TOF MS)确定柴油芳烃的4个族组成,分别为非芳烃、一环芳烃、二环芳烃和三环⁺芳烃,获得37种定性化合物;采用峰面积归一化法对多环芳烃进行定量。结果表明：柴油质控样中多环芳烃测定值的相对误差绝对值不大于5.0%;对柴油样品进行回收试验,回收率为95.7%～104%,测定值的相对标准偏差(n=6)为1.7%～4.3%。方法用于7种实际柴油样品分析,并与NB/SH/T 0806-2022进行比对,结果显示两种方法测定值的相对误差绝对值均不大于5.0%。     

QuEChERS/气相色谱质谱法同时测定膨化食品中多环芳烃类物质

建立了同时测定膨化食品中12种多环芳烃(PAHs)的Qu EChERS/气相色谱三重四极杆质谱(GC-MS/MS)的方法。称取2 g(精确至0.01 g)样品,加入10 mL正己烷提取15 min,采用500 mg乙二胺-N-丙基硅烷化硅胶(PAS)和500 mg C18粉末进行净化,净化后进行GC-MS/MS分析测定。实验结果表明,12种多环芳烃在气相色谱中的分离度良好,在1~1000 ng/mL的浓度范围内线性关系良好。加标回收率测定范围为49%~130%,RSD在1.0%~10%(n=7)之间。检出限在0.20~0.66μg/kg之间,定量限在0.66~2.20μg/kg之间。该方法数据可靠、操作简单快捷、灵敏度高,适合大批量样品中PAHs的测定。     

GC–MS法快速测定食品接触材料油墨中16种多环芳烃

以正己烷超声提取,弗罗里硅土固相萃取柱净化,以正己烷–二氯甲烷溶液(体积比1∶1)洗脱,用GC–MS联用仪SIM模式外标法定量测定食品接触材料油墨中16种多环芳烃。在优化条件下,16种多环芳烃的浓度在0.1～4.0μg/mL范围内与色谱峰面积呈良好的线性关系,线性相关系数大于0.995,检出限为0.12～3.24 ng/L。加标回收率为77.24%～104.76%,测定结果的相对标准偏差为1.05%～1.69%(n=6)。该方法适用于食品接触材料油墨中PAHs的日常检测。     

分散固相萃取-气相色谱-串联质谱法测定蔬菜中多环芳烃及卤代多环芳烃

建立了同时检测蔬菜中16种多环芳烃(PAHs)和11种卤代多环芳烃(X-PAHs)污染水平的分散固相萃取-气相色谱-串联质谱(GC-MS/MS)分析方法。样品中的多环芳烃和卤代多环芳烃经正己烷提取,N-丙基乙二胺吸附剂(PSA)和十八烷基键合硅胶吸附剂(C18)分散固相萃取净化剂净化,气相色谱-串联质谱方法测定,外标法定量。16种PAHs和11种X-PAHs在50,100和200μg/kg添加浓度下的回收率为74.7%～115.1%,相对标准偏差为1.6%～15.3%,方法检出限为0.03～7.4μg/kg。     

气相色谱-串联质谱法测定牛奶中多氯联苯及多环芳烃

建立了快速测定牛奶中20种多氯联苯(PCBs)和多环芳烃(PAHs)的气相色谱-串联质谱(GC-MS/MS)分析方法。目标化合物用正己烷提取3次,Cleanert Ba P-SPE固相萃取柱净化,GC-MS/MS测定。结果表明,20种目标物在5~200μg/L范围内呈良好线性,线性相关系数均大于0.99,方法定量下限为1.0μg/kg。在1.0,2.0,5.0μg/kg 3个加标水平下的平均回收率为67.3%~106.9%,相对标准偏差(RSD)为3.1%~13.9%。该方法简便、快速、准确,可用于牛奶中多氯联苯和多环芳烃残留的检测,为牛奶的质量控制和安全评价提供了保证。     

加速溶剂萃取和凝胶渗透色谱净化GC–MS法测定烟熏腊肉中16种多环芳烃

采用ASE萃取、GPC净化和浓缩,建立GC–MS法快速检测烟熏腊肉中16种多环芳烃(PAHs)的分析方法。将烟熏腊肉与硅藻土充分混合后,放到萃取池中加速溶剂萃取,在优化仪器条件下测定,16种PAHs的线性范围为0.1~4 ng/m L,线性相关系数r为0.985 3~0.999 9。方法检出限在0.172~0.233μg/kg之间,加标回收率为60.3%~93.2%,测定结果的相对标准偏差为4.06%~11.60%(n=6)。该方法检测快速,准确度高,重现性好,适合于烟熏腊肉中16种PAHs的同时测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.