Blue,green,red upconversion luminescence and optical characteristics of rare earth doped rare earth oxide and oxysulfide

The cold isostatic press pretreatment process was adopted to prepare fine rare earth oxysulfide up-conversion phosphors with spherical shape, narrow size distribution and high luminescence efficiency. The upconversion optical characteristics and brightness of the blue (Y2O2SYb,Tm), green (Y2O2S: Yb,Er), red (Y2O3Yb,Er) emitter were also investigated, and a novel method was successfully developed for the brightness measurement of upconversion luminescence (UPL). It is shown that a white color can be obtained by the appropriate mixture of these primary blue, green and red emissions components. The Er3 ions exhibit different upconversion mechanism in Y2O2S and Y2O3 host materials. The rare earth oxysulfide is an efficient upconversion matrix. The UPL brightness of Y2O2S: Yb,Er is 6.5 times higher than that of Y2O3: Yb,Er, and Y2O2S: Yb,Er shows UPL brightness of 1100 cd/m2 under 5.56 W/cm2 power density using a 980 nm laser diode.     

Preparation of yttrium oxysulfide phosphor nanoparticles with infrared-to-green and -blue upconversion emission using an emulsion liquid membrane system

Yttrium oxysulfide upconverting phosphor nanoparticles, doped with Yb as a sensitizer and Er (or Ho, Tm) as an activator, have been prepared via a solid-gas reaction using precursor oxalate particles obtained in an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system. The resulting Y(2)O(2)S:Yb,Er particles, mainly smaller than 50 nm in diameter, demonstrated green upconversion emission under infrared excitation (lambdaex = 980 nm) via a two-photon process. Distinct green and blue upconversion emission were also demonstrated under the same infrared excitation from Y(2)O(2)S:Yb,Ho and Y(2)O(2)S:Yb,Tm nanoparticles, respectively. These upconverting phosphor nanoparticles, together with Y(2)O(3):Yb,Er infrared-to-red upconverting phosphor particles, with different emission under the same infrared excitation may be applied to the luminescent reporter materials for the detection of the targeted analyte in multiplexed assays.     

Study of luminescence properties of novel Er3+ single-doped and Er3+/Yb3+ co-doped tellurite glasses

The novel Er(3+) single-doped and Er(3+)/Yb(3+) co-doped tellurite glasses were prepared. The effect of Yb(2)O(3) concentration on absorption spectra, emission spectra and upconversion spectra of glasses were measured and investigated. The emission intensity, fluorescence full width at half maximum (FWHM) and upconversion luminescence of Er(3+) go up with the increasing concentration of Yb(3+) ions. The maximum FWHM of (4)I(13/2) --> (4)I(15/2) transition of Er(3+) is approximate 77 nm for 1.41 x 10(21)ions/cm(3) concentration of Yb(3+)-doped glass. The visible upconversion emissions at about 532, 546 and 659 nm, corresponding to the (2)H(11/2) --> (4)I(15/2), (4)S(3/2) --> (4)I(15/2) and (4)F(9/2) --> (4)I(15/2) transitions of Er(3+), respectively, were simultaneously observed under the excitation at 970 nm. Subsequently, the possible upconversion mechanisms and important role of Yb(3+) on the green and red emissions were discussed and compared. The results demonstrate that this kind of tellurite glass may be a potentially useful material for developing potential amplifiers and upconversion optical devices.     

Fully fluorinated imidodiphosphinate shells for visible- and NIR-emitting lanthanides: hitherto unexpected effects of sensitizer fluorination on lanthanide emission properties

In this paper we demonstrate that the effect of aromatic C--F substitution in ligands does not always abide by conventional wisdom for ligand design to enhance sensitisation for visible lanthanide emission, in contrast with NIR emission for which the same effect coupled with shell formation leads to unprecedented long luminescence lifetimes. We have chosen an imidodiphosphinate ligand, N-{P,P-di(pentafluorophinoyl)}-P,P-dipentafluorophenylphosphinimidic acid (HF20tpip), to form ideal fluorinated shells about all visible- and NIR-emitting lanthanides. The shell, formed by three ligands, comprises twelve fully fluorinated aryl sensitiser groups, yet no-high energy X--H vibrations that quench lanthanide emission. The synthesis, full characterisation including X-ray and NMR analysis as well as the photophysical properties of the emissive complexes [Ln(F20tpip)3], in which Ln=Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb, Y, Gd, are reported. The photophysical results contrast previous studies, in which fluorination of alkyl chains tends to lead to more emissive lanthanide complexes for both visible and NIR emission. Analysis of the fluorescence properties of the HF20tpip and [Gd(F20tpip)3] reveals that there is a low-lying state at around 715 nm that is responsible for partially quenching of the signal of the visible emitting lanthanides and we attribute it to a pi-sigma* state. However, all visible emitting lanthanides have long lifetimes and unexpectedly the [Dy(F20tpip)3] complex shows a lifetime of 0.3 ms, indicating that the elimination of high-energy vibrations from the ligand framework is particularly favourable for Dy. The NIR emitting lanthanides show strong emission signals in powder and solution with unprecedented lifetimes. The luminescence lifetimes of [Nd(F20tpip)3], [Er(F20tpip)3] and [Yb(F20tpip)3] in deuteurated acetonitrile are 44, 741 and 1111 micros. The highest value observed for the [Yb(F20tpip)3] complex is more than half the value of the Yb ion radiative lifetime.     

Design of poly(ethylene glycol)/streptavidin coimmobilized upconversion nanophosphors and their application to fluorescence biolabeling

Infrared-to-visible upconversion phosphors (i.e., rare earth ion-doped Y2O3 nanoparticles (UNPs)) were synthesized by the homogeneous precipitation method. Because the charge on the erbium (Er) ion-doped Y2O3 (Y2O3:Er) NP (UNP1) surface is positive under neutral conditions, the UNP1 surface was electrostatically PEGylated using negatively charged poly(ethylene glycol)- b-poly(acrylic acid) (PEG- b-PAAc). The adsorption of PEG- b-PAAc was confirmed by Fourier transform infrared (FT-IR) measurements and thermal gravimetric analysis (TGA). The surface charge of the PEGylated UNP1s (PEG-UNP1s) was effectively shielded by the PEGylation. The dispersion stability of the UNP1s was also significantly improved by the PEGylation. The PEG-UNP1s were dispersed over 1 week under physiological conditions as a result of the steric repulsion between the PEG chains on the UNP1 surface. The upconversion emission spectrum of PEG-UNP1s was observed under physiological conditions and was confirmed by near-infrared excited fluorescence microscope observation. Streptavidin (SA)-installed ytterbium (Yb) and Er ion-codoped Y2O3 (Y2O3:Yb,Er) NPs (UNP2s) were prepared by the coimmobilization of PEG- b-PAAc and streptavidin. The PEG/SA coimmobilized UNP2s (PEG/SA-UNP2s) specifically recognized biotinylated antibodies and emitted strong upconversion luminescence upon near-infrared excitation. The obtained PEG/streptavidin coimmobilized UNPs are promising as high-performance near-infrared biolabeling materials.     

Enhanced red emission from GdF3:Yb3+,Er3+ upconversion nanocrystals by Li+ doping and their application for bioimaging

Under 980?nm near-infrared (NIR) excitation, upconversion luminescent (UCL) emission of GdF(3):Yb,Er upconversion nanoparticles (UCNPs) synthesized by a simple and green hydrothermal process can be tuned from yellow to red by varying the concentration of dopant Li(+) ions. A possible mechanism for enhanced red upconverted radiation is proposed. A layer of silica was coated onto the surface of GdF(3):Yb,Er,Li UCNPs to improve their biocompatibility. The silica-coated GdF(3):Yb,Er,Li UCNPs show great advantages in cell labeling and in vivo optical imaging. Moreover, GdF(3) UCNPs also exhibited a positive contrast effect in T(1)-weighted magnetic resonance imaging (MRI). These results suggest that the GdF(3) UCNPs could act as dual-modality biolabels for optical imaging and MRI.     

内嵌硫化镉与上转换纳米颗粒的二氧化钛复合纳米管用于近红外光驱动光催化

由于近红外光在太阳光谱中占44%,因此,近红外光驱动的光催化剂的研制具有十分重要的意义.上转换发光材料可将低能量的近红外光子转换为高能光子,这种高能光子可以通过构建荧光共振转移系统将能量转移并活化量子效率较高的半导体材料,对于太阳能的转化利用具有潜在的应用前景.在本文中,通过胶体化学的过程在电纺丝制备的内嵌CdS纳米颗粒以及上转换荧光纳米颗粒(UCNPs)的二氧化硅复合纳米纤维表面外延生长一层二氧化钛层,通过高温煅烧得到二氧化钛复合纳米管.我们通过二氧化硅结构将CdS纳米颗粒与上转换荧光纳米颗粒紧紧束缚在一起,实现较高的荧光共振能量转移.而且,选择β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)作为纳米能量转换器,替代以前研究工作中使用的β-NaYF4:Yb(30%),Tm(0.5%)或者β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4纳米颗粒,来进一步提高近红外光的转换效率.通过透射电子显微镜照片很清楚的观察到制备的TiO2复合纳米管内部内嵌有大量的CdS与上转换纳米颗粒.通过X-射线衍射以及X-射线光电子能谱能仪器对产物的物相以及表面的化学组成进行了细致的表征.结果显示,通过本实验方法已经成功获得了TiO2复合纳米管.用稳态与瞬态荧光仪研究了最终样品的荧光性质.研究结果揭示,与上转换纳米颗粒以及二氧化硅复合纳米纤维相比,复合二氧化钛纳米管可以将上转换荧光纳米颗粒的(UV-Vis)部分荧光完全淬灭了.特别是,铒离子的荧光(650 nm)也被有效淬灭转移,说明本研究采用β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米能量转换器,可以提高近红外光的转换效率,紫外-可见吸收光谱证实,这种二氧化钛纳米管在紫外-可见光区中的吸收光谱与β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米颗粒的荧光光谱具有较大的重叠,使得上转换荧光纳米颗粒与CdS以及二氧化钛组分之间的荧光共振转移的效率大大提高,进而会显著提高光催化的效果.以罗丹明染料作为污染物为模型,我们研究了罗丹明染料在氙灯下或者近红外光光照下的光催化分解实验.研究结果表明,90%的罗丹明染料分子在20 min内就被降解掉,效率高于其它的近红外光催化剂.上转换荧光纳米颗粒的能量转换效率可以得到大幅度提高,本研究工作中制备的光催化剂利用太阳能的效率将会得到极大提高,在未来为能源危机以及环境保护提供一种可供选择的方法与技术.     

Er~(3 )/Yb~(3 )共掺杂AlF_3基氟化物玻璃材料的频率上转换

Er3 /Yb3 共掺杂的AlF3基氟化物玻璃材料ABCY的制备及其上转换荧光性质。样品的组分为 40AlF3 2 0BaF2 2 0CaF2 (2 0 2x 2y)YF3 xEr2 O3 yYb2 O3。在 95 0nm连续LD激发下 ,观察到该材料很强的绿色上转换发光 ,研究了该体系的上转换机理 ,认为Yb3 和Er3 之间的APTE效应是最主要的上转换途径。解释了红、绿色上转换荧光强度比值增大的现象 ,指出了可能的交叉弛豫过程。用公式y =a(x -x0 ) n 对上转换荧光强度与LD工作电流的关系进行拟合 ,得到的结果与理论值很好地一致。     

Heterobimetallic Zn(II)-Ln(III) phenylene-bridged schiff base complexes, computational studies, and evidence for singlet energy transfer as the main pathway in the sensitization of near-infrared Nd3+ luminescence

A series of 3d-4f heterobimetallic phenylene-bridged Schiff base complexes of the general formula [Zn(mu-L1)Ln(NO3)3(S)n] [Ln = La (1), Nd (2), Gd (3), Er (4), Yb (5); S = H(2)O, EtOH; n = 1, 2; H2L1 = N,N'-bis(3-methoxysalicylidene)phenylene-1,2-diamine] and [Zn(mu-L2)Ln(NO3)3(H2O)n] [Ln = La (6), Nd (7), Gd (8), Er (9), Yb (10); n = 1, 2; H(2)L(2) = N,N'-bis(3-methoxy-5-p-tolylsalicylidene)phenylene-1,2-diamine] were synthesized and characterized. Complexes 1, 2, 4, and 7 were structurally characterized by X-ray crystallography. At room temperature in CH(3)CN, both neodymium(III) (2 and 7) and ytterbium(III) (5 and 10) complexes also exhibited, in addition to the ligand-centered emission in the UV-vis region, their lanthanide(III) ion emission in the near-infrared (NIR) region. The photophysical properties of the zinc(II) phenylene-bridged complexes (ZnL1 and ZnL2) were measured and compared with those of the corresponding zinc(II) ethylene-bridged complexes (ZnL3 and ZnL4). Our results revealed that, at 77 K, both ligand-centered triplet (3LC) and singlet (1LC) states existed for the ethylene-bridged complexes (ZnL3 and ZnL4), whereas only the (1)LC state was detected for the phenylene-bridged complexes (ZnL1 and ZnL2). NIR sensitization studies of [Zn(mu-L')Nd(NO3)3(H2O)n] (L' = L1-L4) complexes further showed that Nd3+ sensitization took place via the 3LC and 1LC states when the spacer between the imine groups of the Schiff base ligand was an ethylene and a phenylene unit, respectively. Ab initio calculations show that the observed differences can be attributed to the difference in the molecular vibrational properties and electron densities of the electronic states between the ethylene- and phenylene-bridged complexes.     

Reactivity of aqua coordinated monoporphyrinate lanthanide complexes: synthetic, structural and photoluminescent studies of lanthanide porphyrinate dimers

Dimerization of monoporphyrinate lanthanide complexes [Yb(Por)(H(2)O)(3)]Cl, (Por = TTP(2-), TMPP(2-) and TPP(2-)) in the presence of sterically hindered tripodal ligand, zinc Schiff-base, dilute HCl, K(2)CO(3) solution, 4,4'-bipyridine (bipy), and basic 8-hydroxyquinaldine (HQ) solution was observed in CH(2)Cl(2) at room temperature. Six neutral dimeric lanthanide porphyrinate complexes, [Yb(TTP)(mu-OH)](2)(mu-THF) (1), [Yb(TMPP)(mu-OH)(H(2)O)](2) (2), [Yb(TPP)(mu-OH)(mu-H(2)O)](2) (4), [Yb(TMPP)(mu-Cl)(H(2)O)](2) (5), [Yb(TMPP)(mu-OH)](2)(THF) (6) and [Yb(TPP)](2)(mu-OH)(mu-Q) (7), were obtained. X-Ray diffraction studies showed that for the dimers, the two lanthanide ions were bridged by OH(-), Cl(-) or H(2)O. Photoluminescent studies showed that the porphyrinate dianion acted as an antenna, transferred its absorbed visible energy to the lanthanide ion and enabled the latter emitting in the near-infrared (NIR) region. In general, the NIR emission is more intense for the dimers than for the monomers, and the NIR emission intensity decreases as the number of O-H oscillators present in the molecule increases.     

含2，2＇-联嘧啶桥Ir^III-Ln^III（Ln=Nd，Yb，Er）双金属配合物的合成和光物理性质

选择具有（N^N）（N^N）位点的四齿配体2,2’-联嘧啶fbpm）作为桥联配体,利用铱配合物Ir（dfppy）2（bpm）Cl作为配体与稀土配合物Ln（TTA）3·2H2O配位,得到了Ir^III-Ln^III（Ln=Nd,Yb,Er）双金属配合物[Ir（dfppy）2（bpm）Ln（TTA）3]Cl．通过荧光滴定的方法,测定了该铱配合物与稀土离子之间的络合稳定常数．通过对铱配合物及Ir^III-Ln^III（Ln=Nd,Yb,Er）双金属配合物在可见区光谱的测定,可以观察到明显的铱配合物发光的猝灭,说明从铱中心到稀土中心发生了能量传递．同时,利用可见光选择性激发铱配合物可以获得在稀土Nd^III,Yb^III,E^III离子红外区的发光．说明了铱配合物Ir（dfppy）2（bpm）Cl作为配体可以较好地敏化稀土离子的红外发光．     

Er3+-Yb3+共掺纳米TiO2上转换光催化杀菌作用研究

采用溶胶凝胶法合成了稀土离子Er^3＋-Yb^3＋共掺杂的纳米TiO2晶体粉末,利用XRD,UV-VIS吸收光谱及上转换发射光谱对其结构和光学特性进行了表征．以致病性嗜水气单胞菌为实验菌株,以980nm激光为激发光源,考察了室温下Er^3＋-Yb^3＋共掺杂纳米TiO2的光催化杀菌性能．结果表明,稀土离子掺杂的纳米TiO2可以通过上转换发光的途径增加TiO2对可见光的利用率,从而实现TiO2在可见光和近红外光范围的光催化氧化杀菌作用．     

A spectroscopic analysis of blue and ultraviolet upconverted emissions from Gd3Ga5O12:Tm3+, Yb3+ nanocrystals

The spectroscopic behavior of gadolinium gallium garnet (Gd3Ga5O12, GGG) nanocrystals codoped with 1% each of Tm3+ and Yb3+ prepared via a solution combustion synthesis procedure was investigated. Initial excitation of the codoped nanocrystals with 465.8 nm (into the 1G4 state) showed a dominant blue-green emission ascribed to the 1G4-3H6 transition as well as red and NIR emissions from the 1G4-3F4 and 1G4-3H5/3H4-3H6 transitions, respectively. Excitation at this wavelength (465.8 nm) showed the existence of a Tm3+ --> Yb3+ energy transfer process evidenced by the presence of the 2F5/2-2F7/2 Yb3+ emission in the NIR emission spectrum. The decay time constants proved that the transfer of energy occurred via the 3H4 state. Following excitation of the Yb3+ ion with 980 nm, intense upconverted emission was observed. Emissions in the UV (1D2-3H6), blue (1D2-3F4), blue-green (1G4-3H6), red (1G4-3F4), and NIR (1G4-3H5/3H4-3H6) were observed and were the direct result of subsequent transfers of energy from the Yb3+ ion to the Tm3+ ion. Power dependence studies showed a deviation from expected values for the number of photons involved in the upconversion thus indicating a saturation of the upconversion process. An energy transfer efficiency of 0.576 was determined experimentally.     

Synthesis, structure, and characterization of three series of 3d-4f metal-organic frameworks based on rod-shaped and (6,3)-sheet metal carboxylate substructures

Three series of porous lanthanide metal-organic coordination polymers, namely [Cu(bpy)Ln(3)(ip)(5)(Hip)(H(2)O)] [Ln = Er (1a), Y (1b), Eu (1c); bpy = 2,2'-bipyridine, H(2)ip=isophthalic acid], [Cu(3)(bpy)(2)Ln(2)(ip)(6)(H(2)O)(5)] [Ln = Yb (2a), Gd (2b), Tb (2c)], and [Cu(3)Ln(2)(ip)(6)] [Ln = Eu (3a), Gd (3b)] have been synthesized hydrothermally by the reaction of the combination of 3d-4f metal centers and N-/O-donor ligands. X-ray diffraction analyses reveal that polymers 1a-c and 2a-c, as well as 3a, b are isomorphous in structure. Polymers 1a-c consist of 3D alpha-Po networks based on a inorganic rod-shaped secondary building units (SBUs) of {Er(6)Cu(2)(bipy)(2)(O(2)C)(11)} which are 27.03 A in length. Polymers 2a-c also contain 3D alpha-Po networks, constructed from shorter (14.79 A) but similarly rod-shaped SBUs of {Yb(2)Cu(3)(bpy)(2)(O(2)C)(12)}. The structure also contains hydrogen-bonded (H(2)O)(6) chains which can be reversibly dehydrated/rehydrated. Polymers 3a, b contain metal carboxylate substructures which have 2D (6,3) topologies; these layers are bridged by the ip(2-) ligands to give an overall 3D network which contains two sorts of cavities. This series of Ln-Cu coordination polymers are further characterized by antiferromagnetic behavior.     

Highly luminescent bis-diketone lanthanide complexes with triple-stranded dinuclear structure

A new bis-β-diketone, 3,3'-bis(4,4,4-trifluoro-1,3-dioxobutyl)biphenyl (BTB), has been designed and prepared for the synthesis of a series of dinuclear lanthanide complexes [Ln(2)(BTB)(3)(C(2)H(5)OH)(2)(H(2)O)(2)] [Ln = Eu (1), Gd (2)], [Ln(2)(BTB)(3)(DME)(2)] [Ln = Nd (3), Yb (4); DME = ethylene glycol dimethyl ether] and [Eu(2)(BTB)(3)(L)(2)] [L = 2,2-bipydine (5); 1,10-phenanthroline (6); 4,7-diphenyl-1,10-phenanthroline (7)]. Complexes 1-7 have been characterized by various spectroscopic techniques and their photophysical properties are investigated. X-ray crystallographical analysis reveals that complexes 1, 3 and 4 adopt triple-stranded dinuclear structures which are formed by three bis-bidentate ligands with two lanthanide ions. The complexes 1 and 3-7 display strong visible red or NIR luminescence upon irradiation at ligand band around 372 nm, depending on the choice of the lanthanide. The solid-state photoluminescence quantum yields and the lifetimes of Eu(3+) complexes are determined and described.     

Controllable synthesis and tunable luminescence properties of Y2(WO4)3:Ln3+ (Ln = Eu, Yb/Er, Yb/Tm and Yb/Ho) 3D hierarchical architectures

Yttrium tungstate precursors with novel 3D hierarchical architectures assembled from nanosheet building blocks were successfully synthesized by a hydrothermal method with the assistance of sodium dodecyl benzenesulfonate (SDBS). After calcination, the precursors were easily converted to Y(2)(WO(4))(3) without an obvious change in morphology. The as-prepared precursors and Y(2)(WO(4))(3) were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) spectra, respectively. The results reveal that the morphology and dimensions of the as-prepared precursors can be effectively tuned by altering the amounts of organic SDBS and the reaction time, and the possible formation mechanism was also proposed. Upon ultraviolet (UV) excitation, the emission of Y(2)(WO(4))(3):x mol% Eu(3+) microcrystals can be tuned from white to red, and the doping concentration of Eu(3+) has been optimized. Furthermore, the up-conversion (UC) luminescence properties as well as the emission mechanisms of Y(2)(WO(4))(3):Yb(3+)/Ln(3+) (Ln = Er, Tm, Ho) microcrystals were systematically investigated, which show green (Er(3+), (4)S(3/2), (2)H(11/2)→(4)I(15/2)), blue (Tm(3+), (1)G(4)→(3)H(6)) and yellow (Ho(3+), (5)S(2)→(5)I(8)) luminescence under 980 nm NIR excitation. Moreover, the doping concentration of the Yb(3+) has been optimized under a fixed concentration of Er(3+) for the UC emission of Y(2)(WO(4))(3):Yb(3+)/Er(3+).     

Novel stoichiometrically erbium-ytterbium cocrystalline complex exhibiting enhanced near-infrared luminescence

Three beta-diketonate complexes of erbium and ytterbium, Er(HFA)3(TPPO)3, Yb(HFA)3(TPPO)3, and Er(1/2)Yb(1/)(2)(HFA)3(TPPO)2 (HFA = hexafluoroacetylacetonate, TPPO = triphenylphosphine oxide) are synthesized and structurally characterized, and their luminescent properties are examined in detail. Compared with monometallic complexes Er(HFA)3(TPPO)3 and Er(HFA)3(TPPO)3, the stoichiometrically Er-Yb cocrystalline complex Er(1/2)Yb(1/2)(HFA)3(TPPO)2 exhibits special indirect near-infrared (NIR) luminescence with the acceptor and sensitizer (donor) coexisting in a single crystal. Of interest is that the NIR luminescence of the erbium ion in Er(1/2)Yb(1/2)(HFA)3(TPPO)2 is significantly enhanced because of the coexistence of the ytterbium ion through the energy-transfer between the ytterbium and erbium ions. The estimated donor-acceptor energy-transfer critical radii R(C,DA), obtained from the F?rster model, are in good agreement with those determined from the single X-ray crystal structure, confirming the dipole-dipole character for such a Yb-Er energy-transfer process.     

Investigation of Er3+, Yb3+, Nd3+ doped yttrium calcium oxyborate for photon upconversion applications

In this work, investigation have been done on polycrystalline yttrium calcium oxyborate (YCa₄O(BO₃)₃) for the realization of existence of second harmonic generation and other photon upconversion processes as concurrent effect with the aid of Er, Yb, Nd trivalent lanthanide ions. Pure, Er:Yb co-doped and Er:Yb:Nd triply-doped YCa₄O(BO₃)₃ samples were prepared through solid state reaction and the phase identification has been done using powder X-ray diffraction spectral analysis. FTIR spectra show that the dopants increases the absorption of functional groups and modifies the lattice vibrational modes of YCa₄O(BO₃)₃. The spectral overlap of optical absorption bands of Er³⁺, Yb³⁺, Nd³⁺ ions in 840 nm–1070 nm region indicates the prospect of energy transfer between these ions. The photoluminescence spectrum of Er:Yb:Nd triply doped sample show good enhancement compared to pure and Er:Yb co-doped YCa₄O(BO₃)₃ samples. In the photon upconversion test carried out using 1064 nm Nd:YAG laser YCa₄O(BO₃)₃:Er:Yb:Nd sample produced green light with efficiency higher than the other two samples. Surface morphology of the samples was recorded using field emission scanning electron microscope and analysed. The elemental composition of the samples has been confirmed by energy dispersive X-ray spectral analysis.     

Study of upconversion fluorescence property of novel Er3+/Yb3+ co-doped tellurite glasses

Er3+/Yb3+ co-doped TeO2-B2O3-Nb2O5-ZnO (TBN) glasses were prepared. The absorption spectra and upconversion luminescence spectra of TBN glasses were measured and analyzed. The upconversion emission bands centered at 530, 546 and 658 nm were observed under the excitation at 975 nm, corresponding to the transitions of 2H11/2-->4I15/2, 4S3/2-->4I15/2 and 4F9/2-->4I15/2 respectively. The ratio of red emission to green emission increases with an increasing of Yb3+ ions concentration. According to the quadratic dependence on excitation power, the possible upconversion mechanisms and processes were discussed.     

Upconversion and fluorescence spectral studies of Er3+/Yb3+-codoped Bi2Q3-GeO2-Ga2Q3-Na2O glasses

The absorption spectra and upconversion fluorescence spectra of Er3+/Yb3+-codoped natrium-gallium-germanium-bismuth glasses are measured and investigated. The intense green (533 and 549 nm) and red (672 nm) emission bands were simultaneously observed at room temperature. The quadratic dependence of the green and red emission on excitation power indicates that the two-photon absorption processes occur. The influence of Ga2C3 on upconversion intensity is investigated. The intensity of green emissions increases slowly with increasing Ga2O3 content, while the intensity of red emission increases significantly. The possible upconversion mechanisms for these glasses have also been discussed. The maximum phonon energy of the glasses determined based on the infrared (IR) spectral analysis is as low as 740 cm-1. The studies indicate that Bi2O3-GeO2-Ga2O3-Na2O glasses may be potential materials for developing upconversion optical devices.