Contamination Pétrolière de la Microcouche de Surface du Golfe de Fos-sur-mer (Mer Méditerranéee)

Abstract

In a general study on the petroleum contamination of the Fos-sur-mer Gulf (Mediterranean Sea), the surface microlayer was sampled. We present here the first results reported up to date in this area, based on a sampling carried out with a rotating PVC drum at 3 stations in May 1985.

Very high hydrocarbons concentrations were sometimes observed in the surface film, which appears more heterogeneous than the underlaying water column (0.5-2m). Water samples were filtered through fiberglass filters (0.5-1 μm). Both dissolved and particulate phases were separately extracted and analysed, providing evidence that suspended particles are the major vector for the accumulation and the transport of petroleum pollutants in these neritic waters.

The petroleum origin of “total hydrocarbons” fractions is confirmed by GC and HPLC which reveal characteristic features for n-alkanes and polynuclear aromatic hydrocarbons. HPLC analysis of polar (non-hydrocarbons) fractions could indicate their formation from petroleum components. Furthermore, the comparison with the underlying waters shows that volatilization and biodegradation are the major processes affecting hydrocarbons distribution in these superficial waters.

Biological data (bacteria, chlorophylls, ATP and energetic charge) were simultaneously measured and indicated an important inhibition of phyto- and bacterio- neuston regarding to the planktonic organisms.     

Catching the elusive persistent and mobile organic compounds: Novel sample preparation and advanced analytical techniques

Persistent and Mobile Organic Compounds (PMOCs) are emerging pollutants in the environment that have only been rarely detected in previous years due to the lack of analytical techniques available for their analysis. These compounds, being very polar, are able to spread through the surface waters, and reach groundwaters and drinking water sources. The challenges in the analysis of these compounds in water include their poor extraction efficiencies from environmental matrices and weak retention in conventional chromatographic columns. As a result, the toxicity and environmental fate of PMOCs are largely unknown. This review will examine recent developments in sorbent and chromatographic column technologies, and other sample preparation strategies that will enable analysis of PMOCs and advance our knowledge on their fate and transport in the environment. In addition, analysis of these compounds in water via liquid chromatography with tandem mass spectrometry (LC–MS/MS) are discussed in this review.     

Current Trends in the Application of Nanomaterials for the Removal of Pollutants from Industrial Wastewater Treatment—A Review

In the recent decades, development of new and innovative technology resulted in a very high amount of effluents. Industrial wastewaters originating from various industries contribute as a major source of water pollution. The pollutants in the wastewater include organic and inorganic pollutants, heavy metals, and non-disintegrating materials. This pollutant poses a severe threat to the environment. Therefore, novel and innovative methods and technologies need to adapt for their removal. Recent years saw nanomaterials as a potential candidate for pollutants removal. Nowadays, a range of cost-effective nanomaterials are available with unique properties. In this context, nano-absorbents are excellent materials. Heavy metal contamination is widespread in underground and surface waters. Recently, various studies focused on the removal of heavy metals. The presented review article here focused on removal of contaminants originated from industrial wastewater utilizing nanomaterials.     

Trends in the use of passive sampling for monitoring polar pesticides in water

The presence of polar pesticides in environmental waters is a growing problem. After application their migration into the aqueous phase is promoted by their high water solubility. Transport processes are usually complex and inputs are generally stochastic; this makes monitoring of this class of pesticides challenging using low volume spot samples of water. Recently there has been a trend to use passive samplers to monitor pesticides in river catchments as it is an in-situ time integrative sampling technique. The three main types of device used for this purpose are, Chemcatcher®, POCIS and o-DGT. This article reviews the fate and current state-of-the-art for monitoring polar pesticides in aqueous matrices. Principles and the theory of passive sampling and strategies for passive sampler design and operation are presented. Advances in the application of passive sampling devices for measuring polar pesticides are extensively critiqued; future trends in their use are also discussed.     

Assessment of the pollutant elimination efficiency by gas chromatography/mass spectrometry, liquid chromatography-mass spectrometry and -tandem mass spectrometry. Comparison of conventional and membrane-assisted biological wastewater treatment processes

The elimination efficiency of advanced conventional biological wastewater treatment was compared to membrane-assisted biological wastewater treatment. The sum parameter analyses dissolved organic carbon (DOC) and chemical oxygen demand (COD) or substance-specific analyses such as gas chromatography combined with mass spectrometry, flow injection analysis (FIA-MS) and liquid chromatography (LC-MS) in combination with mass or tandem mass spectrometry (MS-MS) were applied to assess elimination of hardly eliminable compounds in both types of wastewater treatment plants (WWTP). Reduction of DOC and COD in wastewater treatment processes confirmed a favourable elimination efficiency. Substance-specific methods which were applied in addition permitted a qualitative and semi-quantitative assessment of elimination with a visual pattern recognition approach. In order to identify pollutants either the NIST library of electron impact mass spectra for unpolar compounds or the laboratory-made collision-induced dissociation spectra library for polar pollutants was used. To assess elimination efficiency FIA-MS in the selected ion monitoring mode (SIM) besides high selective substance-specific mass spectrometric techniques such as parent ion scans and neutral loss scans were used for quantification. Results proved that membrane-assisted treatment was more effective than advanced biological treatment. In both types of WWTPs predominantly unpolar pollutants were eliminated, while all effluents were dominated by polar compounds of anthropogenic and biogenic origin. These unpolar and polar compounds which had been identified as hardly eliminable are reported about. Quantitative results obtained by FIA-MS, LC-MS and MS-MS for the elimination of alkyl polyglycol ethers, nonylphenol ethoxylates and linear alkylbenzenesulfonic acids from wastewater are presented.     

Polarizable molecular mechanics studies of Cu(I)/Zn(II) superoxide dismutase: Bimetallic binding site and structured waters

The existence of a network of structured waters in the vicinity of the bimetallic site of Cu/Zn‐superoxide dismutase (SOD) has been inferred from high‐resolution X‐ray crystallography. Long‐duration molecular dynamics (MD) simulations could enable to quantify the lifetimes and possible interchanges of these waters between themselves as well as with a ligand diffusing toward the bimetallic site. The presence of several charged or polar ligands makes it necessary to resort to second‐generation polarizable potentials. As a first step toward such simulations, we benchmark in this article the accuracy of one such potential, sum of interactions between fragments Ab initio computed (SIBFA), by comparisons with quantum mechanics (QM) computations. We first consider the bimetallic binding site of a Cu/Zn‐SOD, in which three histidines and a water molecule are bound to Cu(I) and three histidines and one aspartate are bound to Zn(II). The comparisons are made for different His6 complexes with either one or both cations, and either with or without Asp and water. The total net charges vary from zero to three. We subsequently perform preliminary short‐duration MD simulations of 296 waters solvating Cu/Zn‐SOD. Six representative geometries are selected and energy‐minimized. Single‐point SIBFA and QM computations are then performed in parallel on model binding sites extracted from these six structures, each of which totals 301 atoms including the closest 28 waters from the Cu metal site. The ranking of their relative stabilities as given by SIBFA is identical to the QM one, and the relative energy differences by both approaches are fully consistent. In addition, the lowest‐energy structure, from SIBFA and QM, has a close overlap with the crystallographic one. The SIBFA calculations enable to quantify the impact of polarization and charge transfer in the ranking of the six structures. Five structural waters, which connect Arg141 and Glu131, are endowed with very high dipole moments (2.7–3.0 Debye), equal and larger than the one computed by SIBFA in ice‐like arrangements (2.7 D).     

Synthesis of Glux based polymers for removal of benzene derivatives and pesticides from water

In this study, biomass‐derived Glux was used as a monomer in the polymerization of a novel semi‐aromatic polyethersulfone and polyester. The characterization of the synthesized polymers was carried out by means of MALDI‐TOF and NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. These two polymers were tested as sorbent phases of two families of pollutants (benzene derivatives and pesticides) in water. The analysis of the target hydrophilic pollutants was successfully achieved using high performance liquid chromatography meanwhile gas chromatography was applied for the detection of the hydrophobic pollutants. The adsorption data demonstrate that the novel polyethersulfone based on Glux can effectively remove the studied organic pollutants (polar and non polar, 90% to 100%) at environmental concentration (tested concentration: 1 mg L^?1) simultaneously when present in mixtures.     

Advantages of monolithic over particulate columns for multiresidue analysis of organic pollutants by in-tube solid-phase microextraction coupled to capillary liquid chromatography

The performance of a monolithic C(18) column (150 mm×0.2 mm i.d.) for multiresidue organic pollutants analysis by in-tube solid-phase microextraction (IT-SPME)-capillary liquid chromatography has been studied, and the results have been compared with those obtained using a particulate C(18) column (150 mm×0.5 mm i.d., 5 μm). Chromatographic separation has been carried out under isocratic elution conditions, and for detection and identification of the analytes a UV-diode array detector has been employed. Several compounds of different chemical structure and hydrophobicity have been used as model compounds: simazine, atrazine and terbutylazine (triazines), chlorfenvinphos and chlorpyrifos (organophosphorous), diuron and isoproturon (phenylureas), trifluralin (dinitroaniline) and di(2-ethylhexyl)phthalate. The results obtained revealed that the monolithic column was clearly advantageous in the context of multiresidue organic pollutants analysis for a number of reasons: (i) the selectivity was considerably improved, which is of particular interest for the most polar compounds triazines and phenyl ureas that could not be resolved in the particulate column, (ii) the sensitivity was enhanced, and (iii) the time required for the chromatographic separation was substantially shortened. In this study it is also proved that the mobile-phase flow rates used for separation in the capillary monolithic column are compatible with the in-valve IT-SPME methodology using extractive capillaries of dimensions similar to those used in conventional scale liquid chromatography (LC). On the basis of these results a new method is presented for the assessment of pollutants in waters, which permits the characterization of whole samples (4 mL) in less than 30 min, with limits of detection in the range of 5-50 ng/L.     

Simultaneous determination of 3,4-dimethoxybenzaldehyde and 3,4-dimethoxyphenylacetone in industrial waste waters by high-performance liquid chromatography-diode array detection

The environmental pollutants 3,4-dimethoxybenzaldehyde (DMB) and 3,4-dimethoxyphenylacetone (DMPA) were separated and quantitatively determined in treated and untreated industrial waste waters on a porous graphitized carbon column using HPLC with diode array detection (DAD). It was established that the detector response is linear in a wide range of injected quantities for both pollutants, and the logarithm of the capacity factor depends linearly on the concentration of acetonitrile in the eluent. The relative standard deviation of the retention time, peak height and peak area was lower than 1% in the normal and lower than 3% in the lowest concentration range. Peak purity tests indicated that the method separates well DMB and DMPA from other impurities present in the waste waters. Both aerobic and anaerobic treatments markedly decreased the concentration of DMB and DMPA in industrial waters and HPLC combined with DAD proved to be an adequate analytical procedure to follow such changes.     

Twin comprehensive two-dimensional gas chromatographic system: concept and applications

A twin GC x GC system has been designed which enables the analysis of a sample by means of two different and independent column combinations simultaneously. Both combinations are incorporated in the same oven, using the same temperature programme, and are fed using a 50:50 column-entrance-split. It is demonstrated that, employing combinations of a conventional non-polar x polar and a reversed-type polar x non-polar column set, the information content is as high, and the analytical performance is as good as when using two separate GC x GC systems. That is, there is an appreciable gain of time and a reduction of costs without any loss of quality. The general usefulness of performing, and comparing two mutually different GC x GC runs is further illustrated with FAMEs in olive oil, and pollutants in a sediment sample.     

Quantification and confirmation of priority organic micropollutants in water by LC-tandem mass spectrometry

Liquid chromatography coupled to tandem mass spectrometry with a triple quadrupole analyser was used to determine selected (medium) polar organic pollutants—isoproturon, diuron and pentachlorophenol, as the herbicides simazine, atrazine, terbuthilazine, alachlor, and metolachlor—in treated water from urban solid-waste leachates. Two millilitres of water was preconcentrated by on-line trace enrichment (solid-phase extraction liquid chromatography) which allowed rapid analysis, but still with a satisfactory sensitivity, as the limits of quantification were 0.05?µg?L^?1, while the limits of detection were in the range of 0.001–0.01?µg?L^?1. Confirmation of the identity of compounds was ensured by the use of two tandem mass spectrometry transitions. Moreover, a study of matrix effects was thoroughly investigated by applying the developed procedure to different ground and surface waters. A simple dilution of the water sample with high-performance-liquid-chromatography-grade water was sufficient to minimize and/or remove this undesirable effect in all water samples tested, this approach being feasible due to the excellent sensitivity of the method.     

Concentration of Contaminants in Analysis of Natural Waters

Principles of concentration of pollutants from natural waters by coagulation with a Ti-based coagulant are examined in terms of the Gibbs-Volmer theory.     

Monitoring of Pollutants Content in Bottled and Tap Drinking Water in Italy

The concentration levels of thirteen organic pollutants and selected heavy metals were investigated in 40 plastics bottled and tap water samples. Some of the selected contaminants have an ascertained or suspected endocrine disrupting activity, such as Bisphenol A (BPA) and its analogs, and Bis 2-ethylhexyl phthalate (DEHP), which are used by industries as plasticizers. The most frequently detected pollutants were Bisphenol AF (BPAF) (detection frequency (DF) = 67.5%, mean 387.21 ng L⁻¹), DEHP (DF = 62.5%, mean 46.19 µg L⁻¹) and BPA (DF = 60.0%, mean 458.57 ng L⁻¹), with higher concentration levels found in tap waters. Furthermore, a possible level of exposure to thirteen pollutants via drinking water intake was calculated. Our findings show that, even though the occurrence of contaminants and heavy metals in drinking waters does not pose an immediate, acute health risk for the population, their levels should be constantly monitored and “hard-wired” into everyday practice. Indeed, the health impact to the continuous and simultaneous intake of a huge variety of xenobiotics from various sources by humans is complex and still not fully understood.     

Environmental risk assessment of pharmaceutical residues in wastewater effluents, surface waters and sediments

Pharmaceutical residues in the environment, and their potential toxic effects, have been recognized as one of the emerging research area in the environmental chemistry. The increasing attention, on pharmaceutical residues as potential pollutants, is due that they often have similar physico-chemical behaviour than other harmful xenobiotics which are persistent or produce adverse effects. In addition, by contrast with regulated pollutants, which often have longer environmental half-lives, its continuous introduction in the environment may make them “pseudopersistents”.Pharmaceutical residues and/or their metabolites are usually detected in the environment at trace levels, but, even that, low concentration levels (ng/L or μg/L) can induce to toxic effects. In particular, this is the case of antibiotics and steroids that cause resistance in natural bacterial populations or endocrine disruption effects.In this study, an overview of the environmental occurrence and ecological risk assessment of pharmaceutical residues is presented from literature data. Risk Quotient method (RQ) was applied as a novel approach to estimate the environmental risk of pharmaceuticals that are most frequently detected in wastewater effluents, surface waters and sediments.     

Polar, hydrophilic compounds in drinking water produced from surface water. Determination by liquid chromatography-mass spectrometry.

Drinking water produced from surface water may contain many polar, hydrophilic compounds in spite of different treatment steps such as soil filtration, ozone treatment and activated carbon filtration. Little is known about these compounds. The objectives of this work were the detection and identification by means of tandem mass spectrometry (MS-MS) coupled on-line by a thermospray interface with liquid chromatography. Quantification is possible if standard compounds are available. The different compounds in the water extracts were not only separated by means of an analytical column but also using MS-MS after loop injection bypassing the analytical column. Molecular weight information in the loop spectra (overview spectra) and collisionally induced dissociation (CID) made possible the identification of some of these compounds which cannot be eliminated in the drinking water treatment process. Identification was not only done by interpretation of the recorded daughter- and parent-ion spectra but also by comparing them with a laboratory-made daughter-ion library of polar, hydrophilic pollutants. Direct mixture analysis using MS-MS allows the detection and identification of some of the pollutants if they reach the drinking water in the course of the surface water treatment process because of their biochemical and chemical persistence and/or non-sorbability during the soil or activated carbon filtration process. The proposed method for the analysis of water for polar, non-volatile and/or thermolabile organic substances is a quick, specific and powerful technique which makes it possible to detect and identify these substances without any chromatographic separation or derivatization     

AFM study on the adsorption and aggregation behavior of dissolved humic substances on mica

Humic substances (HS) are a category of naturally occurring, biogenic, heterogeneous organic materials found in or extracted from soils, sediments, and natu- ral waters that can generally be characterized as being yellow-to-black in color, of highly variable relative molecular masses, and refractory[1,2]. Derived from a variety of organic precursors (plant biopolymers such as lignin etc.), plant residues and animal debris via both transformation and synthesis processes[3] under the profound ge…     

GC/MS Identification of Organic Pollutants in the Caroni River,Trinidad

Abstract

Water samples from the Caroni River, Trinidad and other rivers which flow into the Caroni River were qualitatively analyzed for trace organic contaminants by procedures based on XAD extraction followed by GC/MS analysis. Pesticides, polyaromatic hydrocarbons, aliphatic hydrocarbons, phenols and phthalate esters were the main groups of compounds found. Many of the contaminants present in these water samples are known industrial pollutants, and several have been found in waste waters examined by other workers, which suggests that the factories of an industrial complex located upstream of the Caroni/Arena Water Treatment Plant may be the major source of the pollutants. Some compounds identified in the water samples have not been previously reported.     

亲水作用色谱及其在环境分析中的应用进展

亲水作用色谱(HILIC)是一种分离极性和亲水性化合物的液相色谱模式,其作为反相液相色谱(RPLC)的重要补充,近年来越来越受到各个领域的关注和重视。这不只是因为强极性化合物的分离问题在各个领域引起了重视,而且因为与RPLC比较,HILIC具有流动相组成黏度低、色谱柱渗透性好、与质谱联用的灵敏度高及反压较低等优势。本文简要概述了HILIC的发展历程、特点及保留机理,重点介绍了HILIC用于环境分析的最新进展,评述了HILIC及RPLC用于污染物分析的优缺点,并指出了HILIC用于环境分析的未来发展趋势。     

Development of an adapted version of polar organic chemical integrative samplers (POCIS-Nylon)

POCIS (polar organic chemical integrative samplers) are increasingly used for sampling polar compounds. Although very efficient for a wide range of pollutants, the classic configuration of the device has a number of limitations, in particular for the sampling of highly polar analytes and hydrophobic compounds. This study presents a new version of the POCIS passive sampler which uses a highly porous Nylon membrane of 30 μm pore size, enabling the sampling of hydrophobic pollutants and improving the accumulation rate of other pollutants. This newly designed tool and the classic POCIS were both tested during a laboratory experiment to evaluate the accumulation kinetics of a selection of pesticides and pharmaceuticals. The observed results show unexpected accumulation kinetics for the new version of POCIS. To explain the data, the use of an intraparticulate diffusion model was required, which also enabled us to propose another explanation of the burst effect observed with the classic POCIS, primarily related to the potential wetting of the device as the first step in the accumulation of compounds.