Determination of phthalate esters from food-contacted materials by on-line microdialysis and liquid chromatography

Phthalates (endocrine disrupters) released from food-contacted plastics into aqueous solution during microwave conditioning were measured with microdialysis enrichment on-lined high-performance liquid chromatography. The released phthalates in aqueous solution were diffused through a cellular dialysis membrane into the perfusion stream and thus enriched prior to HPLC analysis. Conditions for obtaining optimum enrichment such as the hollow dialysis fiber, flow-rate and polarity modifier in perfusion stream, pH, added-salt and stirring rate in sample solution, as well as chromatographic conditions were investigated. Experimental results indicated that microdialysis enrichment with a 20-cm polysulfone hollow dialysis fiber and heptane as the perfusate at 0.10-microL/min flow-rate to collect phthalates from aqueous sample in 0.5M KCl matrix (optional pH) at 250 rpm stirring offered the optimum enriched efficiency. The dimethyl phthalate (DMP), diethyl phthalate (DEP) and dibutyl phthalate (DBP) were well separated within 16 min by a C-18 column and eluted gradient from 40 to 90% aqueous acetonitrile (at pH 6.0) and 1.0 to 1.5 mL/min flow-rate. Detection was carried out with an UV detector at 225 nm. The enrichment factors were 14, 140 and 201 (at 0.10-microL/min perfusate flow-rate) for DMP, DEP and DBP, respectively, with less than 4% RSD. The proposed method provided a very simple, fast and eco-friendly enriched procedure to determine the extent of phthalates migration from disposable plastic materials into drinking soup.     

Microdialysis of salicylic acid from viscous emulsion samples prior to high-performance liquid chromatographic determination

A micro-dialysis method was developed to isolate aqueous salicylic acid from viscous emulsion samples prior to HPLC determination. The optimal conditions for obtaining dialysis efficiency of salicylic acid as well as chromatographic conditions were investigated. Experimental results indicated that the dialysis achieved at pH 2.0 (0.025 M phosphate solution), 0.5 M NaCl addition, and 50-microl/min flow-rate of perfusion stream offered an optimal result. The proposed method provided a simple procedure for isolating salicylic acid from viscous emulsion samples. Application was illustrated by the analysis of salicylic acid in cosmetic products.     

Determination of Aniline in Water by Microwave-Assisted Headspace Solid-Phase Microextraction and Gas Chromatography

Determination of aniline in wastewater was investigated by microwave-assisted headspace solid-phase microextraction (MA-HS-SPME), for one-step in-situ sample preparation, and gas chromatography. Aniline in the water was evaporated into the headspace under the action of microwave irradiation and adsorbed directly by the SPME fiber. After desorption in the GC injection port and gas chromatography aniline was detected by FID. Conditions affecting the extraction efficiency, for example the pH of the water, addition of salt, microwave power and irradiation time, and desorption conditions were investigated. Experimental results indicated that adjustment of the pH of the water sample to 12 and headspace SPME sampling with a PDMS-DVB fiber under medium–high power irradiation (345 W) for 3 min resulted in the best extraction efficiency. Desorption of aniline was optimum when the SPME fiber was heated at 230 °C for 3 min. The detection limit was approximately 0.01 g mL^–1. The proposed method is a simple, fast, and organic-solvent-free procedure for analysis of aniline in water. Application was illustrated by analysis of aniline in wastewater from a polymer factory.     

Enhancing the microdialysis recovery for sampling of Cu and Ni by incorporating humic acid in the perfusion liquid

A strategy to enhance the microdialysis relative recovery for sampling of Cu and Ni ions is presented. Enhanced recovery was achieved by incorporating humic acid, a binding agent, in the microdialysis perfusion liquid during sampling from a Cu and Ni standard solution mixture. All microdialysis sampling experiments were carried out at room temperature under quiescent conditions using a concentric type of microdialysis probe with an adjustable effective dialysis length. For all metal determinations electrothermal atomic absorption spectrometry was employed. Metal recoveries were shown to be dependent on the membrane molecular weight cut-off, perfusion rate, sample solution pH, perfusion liquid composition as well as perfusion liquid pH. Complete recoveries (100%) of Cu and Ni were obtained by microdialysis sampling using a 10 kDa molecular weight cut-off polysulfone membrane at a flow-rate of 2 μl/min employing a 0.05% (w/v) optimal composition of humic acid incorporated in the perfusion liquid. The optimal sampling pH of humic acid was determined to be 6 where most oxygen containing functional groups are dissociated and available for metal binding. These data have important ramifications for sampling and determination of metal ions in small sample solutions (∼10 ml) at very low concentrations in the ppb range.     

Porous‐membrane‐protected polyaniline‐coated SBA‐15 nanocomposite micro‐solid‐phase extraction followed by high‐performance liquid chromatography for the determination of parabens in cosmetic products and wastewater

A SBA‐15/polyaniline para‐toluenesulfonic acid nanocomposite supported micro‐solid‐phase extraction procedure has been developed for the extraction of parabens (methylparaben, ethylparaben, and propylparaben) from wastewater and cosmetic products. The variables of interest in the extraction process were pH of sample, sample and eluent volumes, sorbent amount, salting‐out effect, extraction and desorption time, and stirring rate. A Plackett–Burman design was performed for the screening of variables in order to determine the significant variables affecting the extraction efficiency. Then, the significant factors were optimized by using a central composite design. The optimum experimental conditions found at 50 mL sample solution, extraction and desorption times of 40 and 20 min, respectively, 500 μL of 3% v/v acetic acid in methanol as eluent, 0.01 M salt addition, and 10 mg of the sorbent. Under the optimum conditions, the developed method provided detection limits in the range of 0.08–0.4 ng/mL with good repeatability (RSD% < 7) and linearity (r² = 0.997–0.999) for the three parabens. Finally, this fast and efficient method was employed for the determination of target analytes in cosmetic products and wastewater, and satisfactory results were obtained.     

ICP-OES determination of traces of Ru, Au, V and Ti preconcentrated and separated by a new poly(epoxy-melamine) chelating resin from solutions

A new poly(epoxy-melamine) chelating resin is synthesized from epoxy resin and used for the preconcentration and separation of traces of Ru(III), Au(III), V(V) and Ti(IV) ions from sample solutions. The ions analyzed can be quantitatively enriched by the resin at a flow-rate of 2 mL/min at pH 4, and quantitatively desorbed with 10 mL of 1 mol/L HCl + 0.2 g CS(NH₂)₂ at a flow-rate of 1 mL/min with recoveries of over 97%. The chelating resin can be reused 7 times without obvious loss of efficiency. Thousand-fold excesses of coexistent ions caused little interference during the enrichment and determination steps. The RSDs for the determination of 50 ng/mL Ru(III) and Au(III), 5.0 ng/mL V(V) and Ti(IV) were in the range of 1.5–4.5%. The recoveries of added standards in a real sample solution are between 96% and 100%, and the results for the ions analyzed in a nickel alloy sample are in good agreement with their reported values.     

Isoelectric focusing field-flow fractionation : III. Investigation of the influence of different experimental parameters on focusing of cytochrome c in the trapezoidal cross-section channel

In addition to the electric field and pH gradient used in isoelectric focusing, a recently introduced technique, isoelectric focusing (or electrical hyperlayer) field-flow fractionation, employs the flow of the liquid carrier through a thin separation channel as a third factor affecting separation. Focusing of cytochrome c (CYTC) in a trapezoidal cross-section channel of 0.875 ml volume and 25 cm length was investigated as a function of the injection procedure, relaxation time, flow-rate of the carrier ampholyte solution and applied electric power. The influence of different initial conditions was also investigated by computer simulation. Both computed and experimental data showed an important contribution of the injection procedure and relaxation time on the retention and shape of the CYTC zone. It follows from these data that the sample should be injected as a narrow zone into the centre of the stream rather than homogeneously together with the carrier solution. For the described experimental set-up it could be demonstrated that the time necessary for zone formation should be at least 15 min and that relaxation times in excess to 20 min do not influence the final shape of the CYTC zone. It could further be shown experimentally that the sample must be injected under an applied electric field, that the relaxation time should be about 10 min, that the elution flow-rate should not be larger than 100 μl/min, that focusing becomes more efficient with increasing electric fields and that, for a given assembly and specified flow conditions, there is an electric power window only within which proper operation is possible.     

Simultaneous extraction and preconcentration of aniline,phenol, and naphthalene using magnetite–graphene oxide composites before gas chromatography determination

The coextraction of acidic and basic compounds from different mediums is a significant concept in sample preparation. In this work, simultaneous extraction of acidic, basic, and neutral analytes in a single step was carried out for the first time. This procedure employed the dispersive solid‐phase microextraction of analytes with magnetic graphene oxide (graphene oxide/Fe₃O₄) sorbent followed by gas chromatography with flame ionization detection. After the adsorption of analytes by vortexing and decantation of the supernatant with a magnet, the sorbent was eluted with acetonitrile/methanol (2:1) mixture. The parameters affecting the extraction efficiency were optimized and obtained as follows: sorbent amount 60 mg, desorption time 1 min, extraction time 5 min, pH of the sample 7, sample volume 20 mL, and elution solvent volume 0.3 mL. Under the optimum conditions, linear dynamic ranges were achieved in the range of 0.5–4, 0.25–4, and 0.25–2 μg/mL and limits of detection were 0.341, 0.110, and 0.167 μg/mL for aniline, phenol, and naphthalene, respectively. The relative standard deviations were in the range of 3.3–5.7% in eight repeated extractions. Finally, the applicability of the method was evaluated by the extraction and determination of analytes in stream water and drinking water samples and satisfactory results were obtained.     

ICP-OES determination of traces of Ru, Au, V and Ti preconcentrated and separated by a new poly(epoxy-melamine) chelating resin from solutions

A new poly(epoxy-melamine) chelating resin is synthesized from epoxy resin and used for the preconcentration and separation of traces of Ru(III), Au(III), V(V) and Ti(IV) ions from sample solutions. The ions analyzed can be quantitatively enriched by the resin at a flow-rate of 2 mL/min at pH 4, and quantitatively desorbed with 10 mL of 1 mol/L HCl + 0.2 g CS(NH₂)₂ at a flow-rate of 1 mL/min with recoveries of over 97%. The chelating resin can be reused 7 times without obvious loss of efficiency. Thousand-fold excesses of coexistent ions caused little interference during the enrichment and determination steps. The RSDs for the determination of 50 ng/mL Ru(III) and Au(III), 5.0 ng/mL V(V) and Ti(IV) were in the range of 1.5–4.5%. The recoveries of added standards in a real sample solution are between 96% and 100%, and the results for the ions analyzed in a nickel alloy sample are in good agreement with their reported values. Received: 12 May 1997 / Revised: 1 September 1997 / Accepted: 9 October 1997     

Using an on-line microdialysis/HPLC system for the simultaneous determination of melamine and cyanuric acid in non-dairy creamer

The recent revelation of melamine (MEL) contamination in foodstuffs in China has rocked the international public health community. Many food categories have been involved in this scandal, including non-dairy creamer (NDC). In this study, we investigated the use of hollow-fiber microdialysis (MD) sampling coupled on-line with high-performance liquid chromatography (HPLC) as an alternative to sample pretreatment for the direct determination of MEL and its analogue cyanuric acid (CYA) in NDC. After MD sampling, the dialysate was injected on-line into the chromatographic system for analysis of MEL and CYA with UV detection at 203 nm. We monitored the effects of various parameters affecting the MD efficiency, namely the characteristics of the MD probe membrane, the flow-rate and the nature of the polarity modifier in the perfusion stream, and the addition of salt in the sample solution. The optimal enrichment efficiency for collecting MEL and CYA from aqueous NDC samples occurred with MD sampling using a hollow polysulfone MD fiber and MeOH as the perfusate at a flow rate of 10 μL min⁻¹. The optimized chromatographic conditions involved using a reversed-phase phenyl column and a mobile phase of 5 mM phosphate buffer in 10% (v/v) MeOH, buffered at pH 6.5. Detection was linear in the concentration range from 0.02 to 5 ppm for MEL and from 2 to 100 ppm for CYA, with detection limits of 1 ppb for MEL and 30 ppb for CYA. The volume of perfusate required to extract MEL and CYA from the NDC solution was only 21 μL. The total MD sampling time was 2.1 min. This method allows the sensitive, eco-friendly, and rapid determination of MEL and CYA in NDC—a risk food for economically motivated adulteration.     

Identification and Characterization of a High Efficiency Aniline Resistance and Degrading Bacterium MC-01

Biodegradation is one of the important methods for the treatment of industrial wastewater containing aniline. In this paper, a degrading bacterium named MC-01, which could survive in high concentration aniline wastewater, was screened from industrial wastewater containing aniline and sludge. MC-01 was preliminarily identified as Ochrobactrum sp. based on the amplified 16S rDNA gene sequence and Biolog system identification. MC-01 was highly resistant to aniline. After 24-h culture under aniline concentration of 6500 mg/L, the amount of bacterium survived still remained 0.05 × 10⁶ CFU/mL. Experiments showed that there was no coupling expression between the growth of MC-01 and aniline degradation. The optimum growth conditions in LB culture were pH 6.0, 30 °C of temperature, and 4% of incubation amount, respectively. And the optimum conditions of aniline degradation of MC-01 were pH 7.0, 45 °C of temperature, and 3.0% of salt concentration, respectively. The degradation rate of MC-01 (48 h) in different aniline concentrations (200~1600 mg/L) was stable under the optimum conditions, which could reach more than 75%.     

分散液液微萃取-反相液液微萃取-扫集-胶束电动色谱法测定红酒中的3种氯酚类物质

建立了分散液液微萃取（DLLME）-反相液液微萃取（RP-LLME）-扫集-胶束电动色谱富集模型,并用于红酒中五氯酚（PCP）、2,4,6-三氯酚（TCP）和2,4-二氯酚（DCP）3种氯酚的测定。实验考察了两步微萃取的萃取参数对氯酚萃取率的影响和样品分离富集的电泳条件。最佳萃取条件DLLME为：3.5 mL红酒（pH 3.0,120 g/L NaCl）,300 μL正己烷（萃取剂）;RP-LLME为：25 μL 0.16 mol/L NaOH（萃取剂）。最佳电泳条件：25 mmol/L NaH₂PO₄,100 mmol/L十二烷基硫酸钠（SDS）,30%（v/v）乙腈,pH 2.3;分离电压-15 kV;样品基质为80 mmol/L NaH₂PO₄;压力进样20 s×20.67 kPa（3 psi）。PCP和TCP的线性范围为0.5~100 μg/L（r≥0.9910）,DCP的线性范围为1.5~80 μg/L（r=0.9851）。3种分析物的检出限（S/N=3）为0.035~0.114 μg/L,加标回收率为75.2%~104.7%,相对标准偏差≤6.17%。该方法富集倍数高、灵敏度高、重现性好、分析速度快,可为不同样品基质中痕量氯酚污染物及某些弱酸性有机污染物测定提供参考。     

TiO2纳米管阵列光电催化氧化处理氨氮废水

用电化学阳极氧化法制备了高度有序的钛基二氧化钛纳米管阵列薄膜。用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)表征样品的形貌与晶型特征。以二氧化钛纳米管阵列为光阳极,石墨为对电极,测试了不同pH值和外加偏压条件下的光电流响应和光电催化氧化降解NH4Cl水溶液(以N计,100 mg·L-1)的效率。结果表明:所制备的TiO2纳米管阵列具有锐钛矿和金红石的混晶结构,且主要晶型为锐钛矿。光电流响应的强弱与光电催化氧化效率的高低相对应,降解氨氮废水的最佳条件为pH=11,偏压为1.0 V。     

Synthesis and characterization of electroactive epoxy‐based interpenetrating polymer network gel

Epoxy/poly(N‐isopropylacrylamide) interpenetrating polymer network gels were prepared by varying the excess amine content in the matrix (0.4–0.6 equivalent). All the samples were characterized for mechanical properties and swelling in distilled water. The topography of polymer network was characterized by atomic force microscopy. The 0.5 equiv. excess amine sample exhibited optimum properties. Studies on swelling at different pH and electroactivity in different aqueous solution were performed. The bending angle observed during first 1 min was 1–5° at 3–10 V and a maximum of 25° in 5 min at 20 V for 0.5 equiv. excess amine in NaCl solution. Copyright © 2011 John Wiley & Sons, Ltd.     

Structural Studies of Aniline: Substituted Aniline Copolymers By Xps

ABSTRACT

The structure and protonation level of the chemically synthesized 2-chloroaniline and 2-iodoaniline homopolymers and their copolymers with aniline have been studied. the results indicate there is no elimination of the substituent group and the polymerization probably occurs at the para-position. the protonation level of the copolymers decreases substantially when the fraction of substituted aniline units is above 0.5, and the electrical conductivity of the copolymers decreases rapidly with an increase in the fraction of substituted aniline units. the protonation level is also lower when HCl rather than H₂SO₄ is used as the protonating acid species, and a significant fraction of the chlorine incorporated is covalently bonded to the polymer. the Nls core-level spectra of the copolymer and the haloaniline homopolymer bases reveal that their imine/amine ratio is substantially lower than that of the polyaniline base. the copolymers show partial solubility in chloroform, but the electrical conductivity of the chloroform-treated samples is not significantly different from that of the pristine sample. When the copolymers synthesized in HCl are heated to 150°C, a fraction of the ionic chlorine is converted to covalently bonded species, resulting in a substantial decrease in the electrical conductivity.     

Goethite as a more effective iron dosage source for mineralization of organic pollutants by electro-Fenton process

The electro-Fenton process is an electrochemical method for wastewater treatment based on the production of hydroxyl radicals via H₂O₂ generation in the presence of ferrous ions. The aim of this work is to show the use of a new mineral iron dosage source (goethite, α-FeOOH) for electro-Fenton process that achieves a more efficient mineralization treatment. Our new proposed Goethite catalyzed electro-Fenton (GEF) process yields 95% of mineralization for an organic model pollutant such as aniline under optimum standard electro-Fenton (SEF) conditions. For that, GEF process uses only 2 ppm of soluble iron, compared with the 55 ppm of soluble iron used by SEF process. In order to show the potential scope of GEF process, the effect of goethite concentration, solution conductivity, solution pH, temperature, and applied current density are studied in detail.     

Determination of cobalt in urine by gas chromatography-mass spectrometry employing nickel as an internal standard.

In addition to the electric field and pH gradient used in isoelectric focusing, a recently introduced technique, isoelectric focusing (or electrical hyperlayer) field-flow fractionation, employs the flow of the liquid carrier through a thin separation channel as a third factor affecting separation. Focusing of cytochrome c (CYTC) in a trapezoidal cross-section channel of 0.875 ml volume and 25 cm length was investigated as a function of the injection procedure, relaxation time, flow-rate of the carrier ampholyte solution and applied electric power. The influence of different initial conditions was also investigated by computer simulation. Both computed and experimental data showed an important contribution of the injection procedure and relaxation time on the retention and shape of the CYTC zone. It follows from these data that the sample should be injected as a narrow zone into the centre of the stream rather than homogeneously together with the carrier solution. For the described experimental set-up it could be demonstrated that the time necessary for zone formation should be at least 15 min and that relaxation times in excess to 20 min do not influence the final shape of the CYTC zone. It could further be shown experimentally that the sample must be injected under an applied electric field, that the relaxation time should be about 10 min, that the elution flow-rate should not be larger than 100 μl/min, that focusing becomes more efficient with increasing electric fields and that, for a given assembly and specified flow conditions, there is an electric power window only within which proper operation is possible.     

Trapping efficiency of aqueous pollutants in multichannel thick-film silicone-rubber traps for capillary gas chromatography

Established standard methods for analysing aqueous pollutants by capillary gas chromatography are cumbersome, time-consuming and expensive. With the aim of replacing the sample preparation procedures with direct concentrating and thermal desorption steps multichannel silicone-rubber traps were tested to determine breakthrough volumes and optimum accumulation conditions as a function of water flow-rate. Larger multichannel traps, consisting of 32 silicone tubes in parallel were made to increase the collection flow-rate through the trap with the same extraction efficiency of the initial smaller traps. It was shown that by increasing the number of parallel silicone tubes in the multichannel trap the breakthrough volume of benzene is 37 ml at a flow-rate of 75 microl/min and the trap displays 11 theoretical plates under these conditions.     

Experimental designs dedicated to the evaluation of a membrane extraction method: membrane-assisted solvent extraction for compounds having different polarities by means of gas chromatography–mass detection

Membrane-assisted solvent extraction was applied for the determination of different classes of compounds in water, having K _o/w (octanol–water partition coefficient) values between 10¹ (aniline) and 10⁸ (methyl stearate), by means of experimental designs. Four solvents were investigated—propan-2-ol, ethyl acetate, diisopropyl ether and cyclohexane—as well as extraction time, temperature, salt impact, pH and methanol addition. The best choice was diisopropyl ether, 50 °C, 30 min and an addition of 3 g of sodium chloride at pH 2 for polar compounds. The relative standard deviation (n = 3) was found in the range from 5 to 17%. Recoveries ranged between 34 and 100%. Membrane-assisted solvent extraction was successfully applied to a fast screening method dedicated to an unknown wastewater sample.     

Transport of aniline,chloroaniline, nitroaniline,and urea through perfluorosulfonated ionomer membranes

The permeabilities of aniline, p-chloroaniline, p-nitroaniline, and urea were measured in a perfluorosulfonated ionomer membrane. Permeabilities for these compounds were of the order of 2 x 10^-10 m²/sec when the external solutions were pH 7. Permeabilities for these compounds were of the order of 6 x 10^-9 m²/sec when the sink solution was pH 1 and the source solution was pH 7. These results indicate that the rate at which these amines exit the isonomer is the rate-limiting step in the transport process.