On synthesis of Fe2SiO4/SiO2 and Fe2O3/SiO2 composites through sol–gel and solid-state reactions

Major processing factors in forming Fe₂SiO₄/SiO₂ and Fe₂O₃/SiO₂ powders via sol–gel synthesis followed by solid-state reactions are investigated. The results clearly indicate that the chemical compositions of the precursors, the ratio of the precursors, the nature of the catalyst used, and the gas atmosphere during solid-state reactions can all affect the outcome of the reaction product(s). The formation of Fe₂SiO₄/SiO₂ is enhanced by using the precursor iron(III) acetylacetonate as the Fe source with the precursor ratio of iron(III) acetylacetonate to tetraethyl orthosilicate being 1:1 and the addition of formic acid. Otherwise, crystalline Fe and Fe₃C are formed in place of Fe₂SiO₄. By altering the gas atmosphere during solid-state reactions from argon to oxygen, the reaction products change from Fe₂SiO₄/SiO₂ to Fe₂O₃/SiO₂. All of the observed phenomena can be rationalized via the degree of mixing of the Fe–O and Si–O domains at the molecular level in the gel network during sol–gel reactions and the presence of a reducing or oxidizing atmosphere during the solid-state reaction.     

Heat of reaction and curing of epoxy resin

The heat of reaction and kinetics of curing of diglycidyl ether of bisphenol-A (DGEBA) type of epoxy resin with catalytic amounts of ethylmethylimidazole (EMI) have been studied by differential power-compensated calorimetry as a part of the program for the study of process monitoring for composite materials. The results were compared with those from 1∶1 and 1∶2 molar mixtures of DGEBA and EMI. A method of determination of heat of reaction from dynamic thermoanalytical instruments was given according to basic thermodynamic principles. The complicated mechanism, possibly involving initial ionic formation, has also been observed in other measurements, such as by time-domain dielectric spectroscopy. The behavior of commercially available DGEBA resin versus purified monomeric DGEBA were compared. The melting point of purified monomeric DGEBA crystals is 41.4 °C with a heat of fusion of 81 J/g. The melt of DGEBA is difficult to crystallize upon cooling. The glass transition of purified DGEBA monomer occurs around ?22 °C with aΔC _p of 0.60 J/K/g.     

Solid-phase microextraction/gas chromatography–mass spectrometry method optimization for characterization of surface adsorption forces of nanoparticles

A complete characterization of the different physico-chemical properties of nanoparticles (NPs) is necessary for the evaluation of their impact on health and environment. Among these properties, the surface characterization of the nanomaterial is the least developed and in many cases limited to the measurement of surface composition and zetapotential. The biological surface adsorption index approach (BSAI) for characterization of surface adsorption properties of NPs has recently been introduced (Xia et al. Nat Nanotechnol 5:671–675, 2010; Xia et al. ACS Nano 5(11):9074–9081, 2011). The BSAI approach offers in principle the possibility to characterize the different interaction forces exerted between a NP's surface and an organic—and by extension biological—entity. The present work further develops the BSAI approach and optimizes a solid-phase microextraction gas chromatography–mass spectrometry (SPME/GC-MS) method which, as an outcome, gives a better-defined quantification of the adsorption properties on NPs. We investigated the various aspects of the SPME/GC-MS method, including kinetics of adsorption of probe compounds on SPME fiber, kinetic of adsorption of probe compounds on NP's surface, and optimization of NP's concentration. The optimized conditions were then tested on 33 probe compounds and on Au NPs (15 nm) and SiO₂ NPs (50 nm). The procedure allowed the identification of three compounds adsorbed by silica NPs and nine compounds by Au NPs, with equilibrium times which varied between 30 min and 12 h. Adsorption coefficients of 4.66?±?0.23 and 4.44?±?0.26 were calculated for 1-methylnaphtalene and biphenyl, compared to literature values of 4.89 and 5.18, respectively. The results demonstrated that the detailed optimization of the SPME/GC-MS method under various conditions is a critical factor and a prerequisite to the application of the BSAI approach as a tool to characterize surface adsorption properties of NPs and therefore to draw any further conclusions on their potential impact on health. Graphical Abstract

The basic principle of SPME/GC-MS method for characterization of nanoparticles surface adsorption forces     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

Preparation of Cu (II)/PEI–QPEI/SiO2 nanopowder as antibacterial material

The silica nanoparticles were prepared by the sol–gel process, and then twice modified and grafted by polyethylenimine (PEI) on their surface. After quaternary ammonium reaction and chelated copper reaction, the PEI/SiO₂, QPEI/SiO₂, PEI–QPEI/SiO₂ and Cu (II)/PEI–QPEI/SiO₂ nanopowders were obtained in turn. The morphology and structure of the products were characterized through SEM, EDX, HRTEM, FTIR and element analysis. At the same time, the antibacterial activity of the products to E. coli and Candida were evaluated through quantification and qualitative ways, e.g. microcalorimetric method and culture dish method. The results suggested that the Cu (II)/PEI–QPEI/SiO₂, a novel three-component functional nanopowder, presented the best antibacterial activity to both E. coli and Candida duo to the synergistic sterilization capability of the ammonium salt and copper ions, compared with other products. It indicated that the Cu (II)/PEI–QPEI/SiO₂ nanopowder could be a novel antibacterial nanomaterial to widely application in preventing and minimizing bacteria of the organism and environment in future.     

Thermal analysis of polymorphism

The combined techniques of thermomicroscopy, differential scanning calorimetry (DSC), thermomicrophotometry (TMP), and micro-Fourier transform infrared spectroscopy (FTIR) are essential for the unequivocal detection of polymorphism. The polymorphism ofp-hexadecylaminobenzoic acid (HABA), a pharmaceutical intermediate, is presented to illustrate the need to use a multitechnique approach. While DSC can record thermally induced processes, it is not a specific technique and it alone cannot distinguish polymorphic transformations from other events connected with enthalpy changes. Thermomicroscopy usually provides confirmation of polymorphism by direct observation of polymorphic forms and transformations, but not all transformations result in visual changes in structure. Micro-FTIR, combined with thermomicroscopy, confirms the chemistry of these thermal changes and provides more specific information on changes in molecular structure.     

The role of octanol in the extraction of hydrochloric acid by trilaurylamine dissolved in benzene

The extraction of hydrochloric acid by trilaurylamine (TLA) dissolved in benzene was studied in the presence and in absence of n-octanol. The extraction of HCl was found to be enhanced by the addition of octanoi to the organic phase. In order to explain this effect by means of the law of mass action, the systems TLA-HCL-benzene and n-octanol-HCl-benzene as well as TLA-octanol-benzene were also studied. It was found that TLA reacts with octanol to form a complex, TLAROH, while the octanol itself associates in benzene to form dimers and tetramers, although it does not extract HCl alone from the dilute solutions used in the present study. The enhancement of the extraction of HCl by TLA upon the addition of n-octanol could be described by the formation of the species TLA·ROH·HCl and its stability constant was determined.     

Penning ionization electron spectrometry of hydrogen chloride

An electron spectrometric study has been performed on HCl using metastable helium and neon atoms as well as neon resonance photons. High resolution electron spectra were obtained with two different beam apparatuses for a mixed He(2¹ S, 2³ S) beam, a pure He(2³ S) beam, and, for the first time, state-selected pure Ne(3s ³ P ₂) and pure Ne(3s ³ P ₀) beams, and for NeI resonance photons. For the system He(2³ S)+HCl the vibrational populationsP(υ′) of the formed HCl⁺ (X ²∏ _i , υ′) and HCl⁺ (A ²Ω⁺, υ′) ions are found to differ from the Franck-Condon factors for unperturbed potentials, indicating slight bond stretching in HCl upon He(2³ S) approach. For He(2¹ S)+HCl the vibrational peak shapes and vibrational populations are substantially different from the He(2³ S) case, pointing to an additional, charge exchanged interaction (He⁺+HCl^?) in the entrance channel of the former system. For the first time, we have detected the electrons in both the He(2¹ S)+HCl and He(2³ S)+HCl spectra associated with the major mechanism for the formation of Cl⁺ ions: energy transfer to repulsive HCl** Rydberg states, dissociating toH(1s) and autoionizing Cl**(¹ D ₂ nl) atoms. For both Ne(³ P ₂)+HCl and Ne(³ P ₀)+HCl, the populationsP(υ′) of both final molecular states HCl⁺ (X, A) agree closely with the Franck-Condon factors at the average relative collision energyē _coll=55 meV and, for HCl⁺ (A ²Ω⁺), also atē _coll=130 meV.     

Biomolecular Imaging with a C60-SIMS/MALDI Dual Ion Source Hybrid Mass Spectrometer: Instrumentation,Matrix Enhancement,and Single Cell Analysis

We describe a hybrid MALDI/C₆₀-SIMS Q-TOF mass spectrometer and corresponding sample preparation protocols to image intact biomolecules and their fragments in mammalian spinal cord, individual invertebrate neurons, and cultured neuronal networks. A lateral spatial resolution of 10 μm was demonstrated, with further improvement feasible to 1 μm, sufficient to resolve cell outgrowth and interconnections in neuronal networks. The high mass resolution (>13,000 FWHM) and tandem mass spectrometry capability of this hybrid instrument enabled the confident identification of cellular metabolites. Sublimation of a suitable matrix, 2,5-dihydroxybenzoic acid, significantly enhanced the ion signal intensity for intact glycerophospholipid ions from mammalian nervous tissue, facilitating the acquisition of high-quality ion images for low-abundance biomolecules. These results illustrate that the combination of C₆₀-SIMS and MALDI mass spectrometry offers particular benefits for studies that require the imaging of intact biomolecules with high spatial and mass resolution, such as investigations of single cells, subcellular organelles, and communities of cells. Graphical Abstract

?     

Gel-assisted synthesis of anatase TiO2 nanoparticles and application for electrochemical determination of L-tryptophan

Anatase titanium dioxide nanoparticles (TiO₂-NPs) were synthesized with and without gelatin via the sol-gel method. The TiO₂-NPs were characterized by a number of techniques, such as thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV-Vis). The particle sizes of the TiO₂-NPs prepared with and without gelatin were ～13 and ～17 nm, respectively. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The results indicated that gelatin was a reliable green stabilizer, which can be used as a polymerization agent in the sol-gel method for synthesis of tiny size TiO₂-NPs. Moreover, the composite film was prepared by synthesized TiO₂-NPs nanoparticles and multi wall carbon nanotube (MWNT) on glassy carbon electrode (TiO₂-MWNT/GCE). The TiO₂-MWNT/GCE responded linearly to L-tryptophan (L-Trp) in the concentration of 1.0 × 10^?6 to 1.5 × 10^?4 M with detection limit of 5.2 × 10^?7 M at 3 using amperometry. The studied sensor exhibited good reproducibility and long-term stability.     

Differential scanning calorimetric analysis of irradiated polytetrafluoroethylene films

Crystalline content of polytetrafluoroethylene (PTFE) can be substantially increased by electron beam irradiation. These changes as a function of radiation dose were examined in PTFE films by differential scanning calorimetry (DSC). Surprisingly small radiation doses (<0.002 Mrad) were found to cause a, fairly substantial increase (25%) in their heat of fusion. Variations in the heat of fusion and the peak melting temperature of PTFE films with radiation dose, in the range of 0.0017 to 16 Mrad, are examined.     

Two-dimensional analysis of the SAXS of partially oriented polymers*)

The Small-angle X-ray scattering (SAXS) patterns of oriented LDPE (λ=1...5.7) were fitted by calculating the small-angle intensity for a structure consisting of a linear paracrystalline lattice built up by finite lamellar or cylindrical crystallites. The resulting data of the superstructure were compared with corresponding values from wideangle X-ray scattering. It is shown that it is impossible to get quantitative information about the superstructure of oriented polymers by using SAXS alone. Nevertheless, the qualitative transition of the crystals during orientation can be explained very well.     

A study of gamma and neutron interaction with aqueous solutions of L-phenylalanine

A study of neutron and gamma interaction (in the low dose range) with L-phenylalanine in aqueous solutions shows that the main radiolytic pathway occurs through the attack of OH radicals. The products of the interaction are essentially tyrosine, Dopa and melanine in both cases. However, for gamma radiation there is a complete utilization of the OH radicals and the reaction pathway mainly proceeds by the sequence: phenylalanine»tyrosine»Dopa»melanine. On the contrary, for neutron radiation, the OH recombination is a rather efficient process and the prevailing pathway is: phenylalanine»Dopa»melanine.     

Preparation and evaluation of PANI/PTT electromagnetic shielding fabric by in-situ chemical polymerization

To prepare the flexible and stretchable electromagnetic shielding (EMS) fabric with environmental stability, this paper uses polytrimethylene terephthalate (PTT) fabric as substrate, the aniline monomer as raw material, hydrochloric acid (HCl) as the doping agent, ammonium persulfate (APS) as the oxidant to produce polyaniline (PANI)/PTT electromagnetic shielding fabric by in-situ chemical polymerization. It studies the influence of APS and HCl concentration on the surface electrical resistance and the absorption loss of electromagnetic shielding fabric. It can be observed that an increasing APS and HCl facilitate the absorption and spread of PANI into PTT fabric to form a conductive network, and improve the absorption loss efficiency, while the excess APS and HCl will hinder the PANI polymerization. The high electrical conductivity and absorption loss of the PANI/PTT fabric are obtained at the concentration of An 0.4 M, APS 0.4 M, HCl 1.25 M, and polymerization reaction time 120 min. Meanwhile, in-situ polymerization of PANI does not introduce new impurities and destroy the molecular structure of PTT.     

SDS 800 — The new data system for quantitative depth profiling of inhomogeneous samples by SIMS

More than 13 years of SIMS application field experience of numerous users of the ATOMIKA Ionmicroprobes have been the basis for the new SIMS Data System SDS 800. The hardware and software concept of the SDS 800, therefore, pays special attention to the following requirements:

1. Convenient set-up, modification and re-use of the measuring parameter sets for easy, time-saving operation.
2. Individual parameter selection from the very broad range of SIMS measuring parameters for optimum SIMS data quality.
3. Multitasking operation for simultaneous handling of SIMS measurement, data processing, data output and of auxiliary techniques.
4. Simultaneous depth profile/ion image acquisition and processing to enhance data quality and to validate data interpretation.
5. User-friendly data processing and output.

     

Isolation and purification of biopolymers by affinity chromatography. VI. Preparation and properties of an affinity adsorbent with a polysaccharide spacer for the purification of proteolytic enzymes

A new affinity sorbent has been synthesized — soybean trypsin inhibitor (STI)-amylopectin-hydrazidosuccinyl-Sepharose — and its properties have been studied in comparison with those of an analogous adsorbent without the spacer STI-Sepharose. The STI-amylopectin-hydrazidosuccinyl-Sepharose adsorbent has been used for the purification of trypsin from porcine pancreas and of callicrein from human blood plasma.     

Thermally stimulated discharge current (TSDC) characteristics in β-phase PVDF–BaTiO3 nanocomposites

β-phase polyvinylidene fluoride (PVDF)–BaTiO₃ nanocomposite samples have been prepared by solution mixing method. XRD data represent that the crystallinity of PVDF decreases with increase in loading level of BaTiO₃ nanoparticles. DSC curve represents that the melting point of PVDF is lightly affected by loading concentration of BaTiO₃. The morphology and microstructure of PVDF and PVDF embedded by BaTiO₃ nanofillers were investigated by using inverted contrast microscopy (ICM) and scanning electron microscopy (SEM). FTIR interferrometry is proven that PVDF and BaTiO₃ are not chemically interacting; therefore, interaction of BaTiO₃ is van der Waals type of interaction. The thermally stimulated discharge current (TSDC) of PVDF and PVDF–BaTiO₃ nanocomposites sample was characterized by single peak. The observed TSDC peak is discussed on the basis of dipolar and interfacial polarization.     

Fluorescent protein-based FRET sensor for intracellular monitoring of redox status in bacteria at single cell level

Monitoring of intracellular redox status in a bacterial cell provides vital information about the physiological status of the cell, which can be exploited in several applications such as metabolic engineering and computational modeling. Fluorescent protein-based genetically encoded sensors can be used to monitor intracellular oxidation/reduction status. This study reports the development of a redox sensor for intracellular measurements using fluorescent protein pairs and the phenomenon of Förster resonance energy transfer (FRET). For the development of the sensor, fluorescent proteins Citrine and Cerulean were genetically modified to carry reactive cysteine residues on the protein surface close to the chromophore and a constructed FRET pair was fused using a biotinylation domain as a linker. In oxidized state, the FRET pairs are in close proximity by labile disulfide bond formation resulting in higher FRET efficiency. In reducing environment, the FRET is diminished due to the increased distance between FRET pairs providing large dynamic measurement range to the sensor. Intracellular studies in Escherichia coli mutants revealed the capability of the sensor in detecting real-time redox variations at single cell level. The results were validated by intensity based and time resolved measurements. The functional immobilization of the fluorescent protein-based FRET sensor at solid surfaces for in vitro applications was also demonstrated. Graphical Abstract

Schematic representation of FRET-based redox sensor