Assembly immobilized palladium(0) on carboxymethylcellulose/Fe3O4 hybrid: An efficient tailor‐made magnetically catalyst for the Suzuki–Miyaura couplings

The Pd nanoparticles (Pd NPs) embedded on magnetically retrievable carboxymethylcellulose/Fe₃O₄ (Pd⁰@CMC/Fe₃O₄) organic/inorganic hybrid were prepared via the conventional simple process. The presence of the hydroxyl and carboxyl groups within the framework of the magnetic hybrid enables the facile preparation and stabilization of Pd NPs in this organic/inorganic hybrid. This hybrid catalyst was very effective in the Suzuki – Miyaura reaction of a variety of aryl halides with arylboronic acid to afford excellent product yields. The catalyst showed good stability and could be easily recovered with an external magnetic field and reused for several times without a significant loss in its catalytic activity. Furthermore, the Pd⁰@CMC/Fe₃O₄ hybrid catalyst was fully characterized by UV–Vis, FT–IR, XRD, SEM, EDX, TEM, XPS and TGA techniques. The hot filtration test suggests that a homogeneous mechanism is operative in Suzuki – Miyaura reaction.     

Fe3O4‐SAHPG‐Pd0 nanoparticles: A ligand‐free and low Pd loading quasiheterogeneous catalyst active for mild Suzuki–Miyaura coupling and C?H activation of pyrimidine cores

This paper reports a green magnetic quasiheterogeneous efficient palladium catalyst in which Pd⁰ nanoparticles have been immobilized in self‐assembled hyperbranched polyglycidole (SAHPG)‐coated magnetic Fe₃O₄ nanoparticles (Fe₃O₄‐SAHPG‐Pd⁰). This catalyst has been used for effective ligandless Pd catalyzed Suzuki–Miyaura coupling reactions of different aryl halides with substituted boronic acids at room temperature and in aqueous media. Herein, SAHPG is used as support; it also acts as a reducing agent and stabilizer to promote the transformation of Pd^II to Pd⁰ nanoparticles. Also, this environmental friendly quasiheterogeneous catalyst is employed for the first time in the synthesis of new pyrimido[4,5‐b]indoles via oxidative addition/C? H activation reactions on the pyrimidine rings, which were obtained with higher yield and faster than when Pd(OAc)₂ was used as the catalyst. Interestingly, the above‐mentioned catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled several times with no significant decrease in the catalytic activity.     

Palladium nanoparticles supported on agarose‐catalyzed Heck–Matsuda and Suzuki–Miyaura coupling reactions using aryl diazonium salts

In this article, palladium nanoparticles supported on agarose were used as an efficient catalyst for Heck–Matsuda and Suzuki–Miyaura coupling reactions of structurally different aryldiazonium tetrafluoroborate substrates in aqueous media. Heck–Matsuda reactions proceeded at 40°C whereas Suzuki‐Miyaura reactions were carried out at room temperature. Both reactions required low catalyst loading. The catalyst was also recycled for the model reaction for three runs. Copyright © 2012 John Wiley & Sons, Ltd.     

Mizoroki–Heck and Suzuki–Miyaura reactions mediated by poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐stabilized magnetically separable palladium catalyst

The purpose of this work was to synthesize and characterize a new magnetic polymer nanosphere‐supported palladium(II) acetate catalyst for reactions requiring harsh conditions. In this regard, an air‐stable, moisture‐stable and highly efficient heterogenized palladium was synthesized by the coordination of palladium(II) acetate with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted modified magnetic nanoparticles with a core–shell structure. The structure of the newly developed catalyst was characterized using various techniques. The catalytic activity of the resultant nano‐organometallic catalyst was evaluated in Mizoroki–Heck and Suzuki–Miyaura reactions to afford the corresponding coupling products in good to excellent yields. High selectivity as well as outstanding turnover number (14 143, 4900) and turnover frequency (28 296, 7424) values were recorded for the catalyst in Suzuki–Miyaura and Mizoroki–Heck reactions, respectively. Magnetic separation and recycling of the catalyst for at least six runs became possible without any significant loss of efficiency or any detectable palladium leaching.     

Synthesis of dendrimers terminated by DABCO ligands and applications of its palladium nanoparticles for catalyzing Suzuki–Miyaura and Mizoroki–Heck couplings

A new kind of silica‐supported third‐generation dendrimers capped by 1,4‐diaza‐bicyclo[2.2.2]octane (DABCO) group‐stabilized palladium(0) nanoparticles, and their enhanced catalytic activity in Suzuki–Miyaura and Mizoroki–Heck reactions in excellent yield under mild conditions, was reported. The resulting silica‐supported dendrimer‐stabilized palladium(0) nanoparticles with a particle size of 10–20 nm were prepared in situ by treatment with PdCl₂ and hydrazine in ethanol at 60 °C for 24 h. The catalyst as prepared was characterized by FT‐IR, X‐ray diffraction, thermal analysis, elementary analysis (EA), scanning electron microscopy and transmission electron microscopy. Recycling experiments showed that the catalyst could be easily recovered by simple filtration and reused for up to five cycles without losing its activity. Copyright © 2012 John Wiley & Sons, Ltd.     

Sulfonated palladium(II) N‐heterocyclic carbene complex immobilized on nano–micro size poly(4‐vinylpyridinium chloride) for Suzuki‐Miyaura cross‐coupling reaction

The sulfonated palladium(II) N‐heterocyclic carbene complex Pd^II(NHC)SO₃^?, supported on poly(4‐vinylpyridinium chloride), was used as a heterogeneous, recyclable and active catalyst for the Suzuki–Miyaura reaction. This catalyst was applied for coupling of various aryl halides with phenylboronic acid and the corresponding products were obtained in excellent yields and short reaction times. The catalyst was characterized using Fourier transform infrared and diffuse reflectance UV–visible spectroscopies, scanning electron microscopy and elemental analysis. After each reaction, the catalyst was recovered easily by simple filtration and reused several times without significant loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly efficient polymer‐stabilized palladium heterogeneous catalyst: Synthesis,characterization and application for Suzuki–Miyaura and Mizoroki–Heck coupling reactions

A suitable approach to stabilize palladium nanoparticles (Pd NPs), with an average diameter of 3–4 nm, on magnetic polymer is described. A new magnetic polymer containing 4′‐(4‐hydroxyphenyl)‐2,2′:6′,2″‐terpyridine (HPTPy) ligand was prepared by the polymerization of itaconic acid (ITC) as a monomer and trimethylolpropane triacrylate (TMPTA) as a cross‐linker and fully characterized. Pd NPs embedded on the magnetic polymer were successfully applied in Suzuki–Miyaura and Mizoroki–Heck coupling reactions under low palladium loading conditions, and provided the corresponding products with excellent yields (up to 98%) and high catalytic activities (TOF up to 257 hr^?1). Also, the catalyst can be easily separated and reused for at least consecutive five times with a small drop in catalytic activity.     

Alcoholic solvent‐assisted ligand‐free room temperature Suzuki–Miyaura cross‐coupling reaction

We have observed the enhancing effect of alcoholic solvents in palladium‐catalysed ligand‐free Suzuki–Miyaura reactions. No extra additives or ligands are required for the Suzuki–Miyaura reaction of aryl bromides with arylboronic acids when we carried out the reaction in alcoholic or aqueous alcoholic solvents. Moreover, ethanol or aqueous ethanol is found to be a very good solvent for the Suzuki–Miyaura reaction involving electronically diverse aryl bromides and arylboronic acids under mild and ligand‐free conditions with low catalyst loading. It is observed from Hg(0) poisoning tests that the in situ generated palladium(0) species is the actual catalytic species for the reaction. Copyright © 2015 John Wiley & Sons, Ltd.     

Urea‐Based Porous Organic Frameworks: Effective Supports for Catalysis in Neat Water

Two urea‐based porous organic frameworks, UOF‐1 and UOF‐2, were synthesized through a urea‐forming condensation of 1,3,5‐benzenetriisocyanate with 1,4‐diaminobenzene and benzidine, respectively. UOF‐1 and UOF‐2 possess good hydrophilic properties and high scavenging ability for palladium. Their palladium polymers, Pd^II/UOF‐1 and Pd^II/UOF‐2, exhibit high catalytic activity and selectivity for Suzuki–Miyaura cross‐coupling reactions and selective reduction of nitroarenes in water. The catalytic reactions can be efficiently performed at room temperature. Palladium nanoparticles with narrow size distribution were formed after the catalytic reaction and were well dispersed in UOF‐1 and UOF‐2. XPS analysis confirmed the coordination of the urea oxygen atom with palladium. SEM and TEM images showed that the original network morphology of UOF‐1 and UOF‐2 was maintained after palladium loading and catalytic reactions.     

An improved preparation of mesoporous silica‐supported Pd as sustainable catalysts for phosphine‐free Suzuki–Miyaura and Heck coupling reactions

An improved and eco‐friendly procedure has been developed to generate mesoporous silica‐supported palladium nanoparticles (SiO₂@PdNP) that could be used as a sustainable heterogeneous Pd catalyst for phosphine‐free Suzuki–Miyaura and Heck coupling reactions with excellent turnover number and turnover frequency. The presence of Pd on the silica surface was detected by X‐ray diffraction and the structural morphology of SiO₂@PdNP was obtained by transmission electron microscopy. The heterogeneous catalytic system is recyclable and leaching of the metal after the reaction is not apparently observed. Copyright © 2013 John Wiley & Sons, Ltd.     

Magnetic iron oxide nanoparticles–N‐heterocyclic carbene–palladium(II): a new,efficient and robust recyclable catalyst for Mizoroki–Heck and Suzuki–Miyaura coupling reactions

A new and efficient nanoparticle–N‐heterocyclic carbene–palladium complex was synthesized and characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy, energy‐dispersive X‐ray analysis, X‐ray diffraction, transmission electron microscopy, elemental analysis, inductively coupled plasma analysis and vibrating sample magnetometry. This catalytic system was found to be a highly active catalyst in the Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions. These reactions were best performed in dimethylformamide and water, respectively, in the presence of only 0.054 mol% of palladium under mild conditions. Moreover, the catalyst could be recovered easily and reused at least ten times without any considerable loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Polyaniline‐anchored palladium catalyst‐mediated Mizoroki–Heck and Suzuki–Miyaura reactions and one‐pot Wittig–Heck and Wittig–Suzuki reactions

A polyaniline‐anchored palladium catalyst was prepared and screened for coupling reactions of aryl halides. The robust and recyclable catalyst was effective in Mizoroki–Heck and Suzuki–Miyaura reactions of aryl bromides and aryl iodides. The catalyst system was further employed for one‐pot Wittig–Heck and Wittig–Suzuki combinations to build conjugated compounds in good conversions. Copyright © 2014 John Wiley & Sons, Ltd.     

A phosphine‐free heterogeneous Suzuki–Miyaura reaction of aryl bromides catalyzed by MCM‐41‐supported tridentate nitrogen palladium complex under air

MCM‐41‐supported tridentate nitrogen palladium(II) complex [MCM‐41‐3 N‐Pd(II)] was conveniently synthesized from commercially available and cheap 3‐(2‐aminoethylamino)propyltrimethoxysilane via immobilization on MCM‐41, followed by reacting with pyridine‐2‐carboxaldehyde and PdCl₂. It was found that this palladium complex is an excellent catalyst for the Suzuki–Miyaura coupling reaction of aryl bromides on two points: (i) the use of 5 × 10⁻⁴ mol equiv. of MCM‐41‐3 N‐Pd(II) under air afforded the coupling products efficiently after easy workup; (2) the catalyst can be reused many times without loss of catalytic activity. Copyright © 2011 John Wiley & Sons, Ltd.     

A highly active palladium(II)–bis(oxazoline) catalyst for Suzuki–Miyaura,Mizoroki–Heck and sonogashira coupling reactions in aqueous dimethylformamide

An efficient catalytic system based on a new palladium–bis(oxazoline) ( Pd-BOX-1 ) complex has been developed. The complex Pd-BOX-1 adopts a legless chair‐type structure where the distorted square planar [PdN₂Cl₂] moiety and the benzene ring spacer represent the seat and the chair back, respectively. The catalytic activity of Pd-BOX-1 has been investigated in dimethylformamide–water under aerobic and mild conditions in Suzuki–Miyaura coupling reactions of arylboronic acids with aryl iodides, aryl bromides and aryl chlorides, Mizoroki–Heck coupling reactions of aryl halides with styrene derivatives, and Sonogashira coupling reactions of aryl halides with terminal alkynes. A wide range of functional groups as substituents on the arylboronic acids and aryl halides were considered. Pd-BOX-1 demonstrates exceptional air and moisture stability. Of note, the catalyst system based on Pd-BOX-1 shows high recycling ability in Suzuki–Miyaura coupling reactions in dimethylformamide–water without any loss in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparison of dppf‐Supported Nickel Precatalysts for the Suzuki–Miyaura Reaction: The Observation and Activity of Nickel(I)

Ni‐based precatalysts for the Suzuki–Miyaura reaction have potential chemical and economic advantages compared to commonly used Pd systems. Here, we compare Ni precatalysts for the Suzuki–Miyaura reaction supported by the dppf ligand in 3 oxidation states, 0, I and II. Surprisingly, at 80 °C they give similar catalytic activity, with all systems generating significant amounts of Ni^I during the reaction. At room temperature a readily accessible bench‐stable Ni^II precatalyst is highly active and can couple synthetically important heterocyclic substrates. Our work conclusively establishes that Ni^I species are relevant in reactions typically proposed to involve exclusively Ni⁰ and Ni^II complexes.     

Amidophosphine‐stabilized palladium complexes catalyse Suzuki–Miyaura cross‐couplings in aqueous media

We report a simple and efficient procedure for Suzuki–Miyaura reactions in aqueous media catalysed by amidophosphine‐stabilized palladium complexes trans‐{L³PPh₂}₂PdCl₂ ( 3 ), trans‐{L³PPhtBu}₂PdCl₂ ( 4 ), [Pd(η³‐C₃H₅)(L³PPh₂)Cl] ( 5 ) and {Pd[2‐(Me₂NCH₂)C₆H₄](L³PPh₂)Cl} ( 6 ). The acidity of the NH proton in complexes 3 , 4 , 5 , 6 plays an important role in their catalytic activity. In addition, the palladium complexes cis‐{L¹PPh₂}PdCl₂ ( 1 ) and trans‐{L²PPh₂}₂PdCl₂ ( 2 ) stabilized by phosphines containing Y,C,Y‐chelating ligands L^1,2 have also been found to be useful catalysts for Suzuki–Miyaura reactions in aqueous media. The method can be effectively applied to both activated and deactivated aryl bromides yielding high or moderate conversions. The catalytic activity of couplings performed in pure water increases when utilizing a Pd complex with more acidic NH protons. A decrease of palladium concentration from 1.0 to 0.5 mol% does not lead to a substantial loss of conversion. In addition, Pd complex 1 can be efficiently recovered using two‐phase system extraction. Copyright © 2016 John Wiley & Sons, Ltd.     

A highly water‐dispersible and magnetically separable palladium catalyst based on functionalized poly(ethylene glycol)‐supported iminophosphine for Suzuki–Miyaura coupling in water

A magnetically separable Fe₃O₄@poly(ethylene glycol) (PEG)–iminophosphine palladium complex was successfully prepared by reacting a palladium complex containing the ligand 2‐(diphenylphosphino)benzaldehyde with amino‐functionalized PEG‐coated iron oxide nanoparticles. The novel catalyst was characterized using inductively coupled plasma atomic emission and Fourier transform infrared spectroscopies, transmission electron microscopy, vibrating sample magnetometry, X‐ray diffraction and thermogravimetric analysis. It showed high activity for the Suzuki–Miyaura coupling reaction in pure water. Furthermore, it was found that the highly water‐dispersible catalyst can be recovered by applying an external magnetic field and used in five consecutive runs without significant decrease in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetically water‐dispersible and recoverable rhodium organometallic catalyst derived from Wilkinson's catalyst for promoting organic reactions

A novel magnetic rhodium catalyst was prepared through immobilizing Wilkinson's catalyst on the surface of silica‐coated iron oxide nanoparticles. After (thio)diphenylphosphine (─S&─PPh₂) was modified on the surface of the silica‐coated iron oxide nanoparticles, tris(triphenylphosphine)rhodium(I) chloride was employed to synthesize the Rh(Cl)(PPh₃)₂(Ph₂P&─S&─) complex, affording a rhodium loading of 0.16 mmol g⁻¹. The Rh(I) organometallic magnetic nanoparticles form a novel class of heterogeneous catalyst which is particularly suitable for the practice of organic synthesis. The prepared system exhibits high catalytic efficiency in Suzuki–Miyaura and Miyaura–Michael reactions in ethanol–water solution. High yield, low reaction times, use of green solvents and non‐toxicity of the catalyst are the main merits of this protocol. Also, magnetic separation is an environmentally friendly alternative for the recovery of the catalyst, since it minimizes energy and catalyst loss by preventing mass loss and oxidation. The produced catalyst was characterized using a variety of techniques.     

Exploring the Oxidative‐Addition Pathways of Phenyl Chloride in the Presence of PdII Abnormal N‐Heterocyclic Carbene Complexes: A DFT Study

DFT calculations were performed to elucidate the oxidative addition mechanism of the dimeric palladium(II) abnormal N‐heterocyclic carbene complex 2 in the presence of phenyl chloride and NaOMe base under the framework of a Suzuki–Miyaura cross‐coupling reaction. Pre‐catalyst 2 undergoes facile, NaOMe‐assisted dissociation, which led to monomeric palladium(II) species 5 , 6 , and 7 , each of them independently capable of initiating oxidative addition reactions with PhCl. Thereafter, three different mechanistic routes, path a, path b, and path c, which originate from the catalytic species 5 , 7 , and 6 , were calculated at M06‐L ‐D3(SMD)/LANL2TZ(f)(Pd)/6–311++G**//M06‐L/LANL2DZ(Pd)/6–31+G* level of theory. All studied routes suggested the rather uncommon Pd^II/Pd^IV oxidative addition mechanism to be favourable under the ambient reaction conditions. Although the Pd⁰/Pd^II routes are generally facile, the final reductive elimination step from the catalytic complexes were energetically formidable. The Pd^II/Pd^IV activation barriers were calculated to be 11.3, 9.0, 26.7 kcal mol^?1 (ΔΔ^≠G_L^S‐D3) more favourable than the Pd^II/Pd⁰ reductive elimination routes for path a, path b, and path c, respectively. Out of all the studied pathways, path a was the most feasible as it comprised of a Pd^II/Pd^IV activation barrier of 24.5 kcal mol^?1 (ΔG_L^S‐D3). To further elucidate the origin of transition‐state barriers, EDA calculations were performed for some key saddle points populating the energy profiles.     

Porphyrin‐based polymer‐supported palladium as an excellent and recyclable catalyst for Suzuki–Miyaura coupling reaction in water

A porphyrin‐based polymer with high surface area was synthesized using 5,10,15,20‐tetraphenylporphyrin through a one‐pot Friedel–Crafts alkylation reaction. Pd(II) was successfully supported on this polymer. This strategy provides an easy approach to produce highly stable Pd–porphyrin‐based polymer. The resulting Pd catalyst was characterized using Fourier transform infrared and X‐ray photoelectron spectroscopies, thermogravimetric analysis, scanning and transmission electron microscopies and N₂ adsorption–desorption measurements. This porphyrin‐based polymer‐supported Pd was used as a heterogeneous catalyst for Suzuki–Miyaura coupling reaction in water. The results demonstrated that this Pd catalyst indeed exhibited excellent catalytic activity and recycling performance in water, even for inactive aryl chloride substrate. A new heterogeneous strategy for catalyzing the Suzuki–Miyaura reaction in water is provided.