1,3,2,4-Diazadiphosphetidines as new P-N ligands for palladium-catalyzed Heck reaction in water

1,3,2,4-Diazadiphosphetidine-based phosphazane class have been used as a new generation of heterogeneous bidentate P(III) ligands containing nitrogen for base-free Pd(II) catalyzed C-C bond formation through Heck coupling reaction of aryl iodides, bromides and chlorides in water with styrene, n-butyl acrylate, 1-octene, and cyclohexene. The reactions occur heterogeneously in water and homogenously or partially heterogeneously in appropriate organic solvents. The ligand together with its Pd(0) complex is easily separated by filtration and reused for several runs.     

Active palladium catalyst supported by bulky diimine ligand catalyzed Suzuki–Miyaura coupling reaction in water under phosphane‐free and low catalyst loading conditions

A new catalytic system based on palladium and bulky diimine ligand for Suzuki–Miyaura coupling reaction of aryl iodides, bromides and chlorides in neat water is described. The desired biphenyl products were obtained in high to excellent yields for aryl iodides and bromides in the presence of low catalyst loading. Air‐stable catalyst has been recycled for the reaction of iodobenzene with phenylboronic acid for five consecutive runs. Copyright © 2014 John Wiley & Sons, Ltd.     

Phosphine-Free Tetradentate Salicylaldimine Ligand Complexed with Palladium: First Application in Heck Reactions

Heck reactions were carried out using phosphine-free tetradentate salicylaldimine ligand complexed with PdCl₂ under mild reaction conditions, short reaction time, and low palladium loading. All aryl iodides underwent coupling reactions with olefins, giving corresponding trans-products, with good to excellent yields, whereas aryl bromides gave very poor yields and aryl chlorides failed to react.     

Efficient copper-catalyzed S-vinylation of thiols with vinyl halides

The synthesis of vinyl sulfides through the coupling reaction of thiols with vinyl iodides, bromides, and chlorides is described. The thiols can couple with aryl iodides in the presence of only 0.5 mol % Cu(2)O without the need for an ancillary ligand. In the presence of 5 mol % of Cu(2)O and 10 mol % 1,10-phenanthroline as the ligand, the more challenging alkyl vinyl bromides can also be coupled with thiols, giving the vinyl sulfides in good to excellent yields.     

Highly efficient synthesis of phenols by copper-catalyzed hydroxylation of aryl iodides, bromides, and chlorides

8-Hydroxyquinolin-N-oxide was found to be a very efficient ligand for the copper-catalyzed hydroxylation of aryl iodides, aryl bromides, or aryl chlorides under mild reaction conditions. This methodology provides a direct transformation of aryl halides to phenols and to alkyl aryl ethers. The inexpensive catalytic system showed great functional group tolerance and excellent selectivity.     

N,N-dimethyl-beta-alanine as an inexpensive and efficient ligand for palladium-catalyzed Heck reaction

N,N-Dimethyl-beta-alanine was found to be a more powerful phosphine-free ligand than the previously reported ligand, N,N-dimethylglycine, in the Pd-catalyzed Heck reaction for a variety of aryl bromides, aryl iodides, and activated aryl chlorides with a practical turnover number of 10(3). Both kinetic and theoretical studies suggested that N,N-dimethyl-beta-alanine led to faster oxidative addition of an aryl halide to Pd than N,N-dimethylglycine. [reaction: see text]     

Electron transfer activity of a cobalt crown carbene complex

The novel cobalt(II) crown carbene complex 12(II) has been prepared and characterised by X-ray crystallography. This complex is reduced in a one-electron process to a cobalt(I) complex that acts as a powerful single electron donor, reducing aryl halides, including aryl chlorides and demonstrating the strong electron-enriching effect on cobalt of the crown carbene ligand. The metal ion is tightly held in a tetrahedral conformation by its enveloping crown ligand—this prevents what would otherwise be expected to be an easy oxidation to cobalt(III) under standard electrochemical conditions. Complex 12 is shown to be an effective catalyst in mediated electrochemical reductions of aryl iodides at room temperature and aryl bromides at 90 °C. The electrochemically produced catalyst [from 10 mol % of added Co(II) complex] also triggers reduction of aryl chlorides, although this seems at the limit of its reactivity. However, when the cobalt(II) complex is reduced by sodium amalgam, this affords stoichiometric quantities of the active cobalt reducing agent, which affords reduction of aryl iodides and bromides as above, but also reduces aryl chlorides at elevated temperatures.     

2,2′-Diamino-6,6′-dimethylbiphenyl as an efficient ligand in the palladium-catalyzed Suzuki–Miyaura and Mizoroki–Heck reactions

2,2′-Diamino-6,6′-dimethylbiphenyl was found to be an efficient ligand in the palladium-catalyzed Suzuki–Miyaura coupling reactions of aryl iodides, bromides, and chlorides and Mizoroki–Heck reactions of aryl iodides and bromides. Under appropriate conditions, all reactions gave the desired products in moderate to excellent yields. The ligand is inexpensive, air-stable and easy to available.     

Highly reactive, general and long-lived catalysts for palladium-catalyzed amination of heteroaryl and aryl chlorides, bromides, and iodides: scope and structure-activity relationships

We describe a systematic study of the scope and relationship between ligand structure and activity for a highly efficient and selective class of catalysts containing sterically hindered chelating alkylphosphines for the amination of heteroaryl and aryl chlorides, bromides, and iodides. In the presence of this catalyst, aryl and heteroaryl chlorides, bromides, and iodides react with many primary amines in high yields with part-per-million quantities of palladium precursor and ligand. Many reactions of primary amines with both heteroaryl and aryl chlorides, bromides, and iodides occur to completion with 0.0005-0.05 mol % catalyst. A comparison of the reactivity of this catalyst for the coupling of primary amines at these loadings is made with catalysts generated from hindered monophosphines and carbenes, and these data illustrate the benefits of chelation. Studies on structural variants of the most active catalyst indicate that a rigid backbone in the bidentate structure, strong electron donation, and severe hindrance all contribute to its high reactivity. Thus, these complexes constitute a fourth-generation catalyst for the amination of aryl halides, whose activity complements catalysts based on monophosphines and carbenes.     

Palladium(0) nanoparticle-catalyzed sp C-H activation: a convenient route to alkyl-aryl ketones by direct acylation of aryl bromides and iodides with aldehydes

Palladium(0) nanoparticles efficiently catalyze aliphatic aldehyde C-H functionalization by aryl halides to produce alkyl-aryl ketones in good yields. A wide range of substituted aryl and hetero-aryl bromides/iodides and open-chain aldehydes of varied chain length participated in this reaction.     

A highly active and stable imidazolidine-bridged N,O-donor ligand for efficient palladium catalyzed Suzuki–Miyaura reactions in water

Abstract  

We have used the sterically hindered N,O-donor ligand 1,4-bis(2-hydroxy-3,5-di-tert-butyl-benzyl)-imidazolidine with various Pd salts as a catalyst for the Suzuki reaction. This system exhibited excellent catalytic activity in Suzuki reactions of arylboronic acids with aryl halides, including aryl iodides, aryl bromides and activated aryl chlorides, using aqueous methanol as solvent under mild conditions. The catalytic system can be reused once without significant loss of activity.     

Preparation of anionic phosphine ligands in situ for the palladium-catalyzed Buchwald/Hartwig amination reactions of aryl halides

2-Phenylindenyl phosphine ligand can be changed into anionic phosphine ligand in situ and utilized in the palladium-catalyzed Buchwald/Hartwig amination reactions in DME, providing good to excellent yields of amination products from aryl chlorides, bromides and iodides. ³¹P NMR studies show that the resonance for the anionic phosphine appeared between those of the (2-phenylindenyl)-dicyclohexyl phosphonium salt and (2-phenylindenyl)dicyclohexylphosphine. The calculated results were consistent with the experimental results.     

Use of polymer-supported dialkylphosphinobiphenyl ligands for palladium-catalyzed amination and Suzuki reactions

The preparations of polymer-supported dialkylphosphinobiphenyl ligands (3) are reported. A palladium catalyst based on ligand 3a is active for amination and Suzuki reactions using unactivated aryl iodides, bromides, or chlorides. Filtration of the catalyst from the reaction mixture allows for simplified product isolation via an aqueous workup. The resin-bound catalyst can be recycled without additional palladium in both the amination and Suzuki reactions.     

Direct N‐Arylation of Azaheterocycles with Aryl Halides under Ligand‐free Condition

A simple and efficient C? N cross‐coupling method of aryl halides with various heterocycles was reported, by using 10 mol% of CuI as catalyst and 1.2 equiv. NaH as base. Aryl iodides, aryl bromides and many substituted aryl chlorides could efficiently react with heterocycles, providing variety of N‐arylated products in good to excellent yields. The ligand‐free catalyst system was stable in air and could be readily reused.     

Efficient catalysis of Ullmann-type arylation reactions by a novel trinuclear copper(I) complex with a chelating tricarbene ligand

A novel trinuclear copper(I) complex with a chelating tricarbene ligand is shown to be an efficient catalyst for the arylation of different classes of compounds containing N-H or O-H functions. Different kinds of azole rings (pyrazole, imidazole, 1,2,4-triazole) can be arylated with comparable efficiencies at relatively mild temperatures (100 °C). The catalyst activates aryl iodides, bromides and even chlorides for the reaction. An unusually strong influence of the nature of the aryl substituent on the reaction yield is observed. The synthetic protocol can be extended to other substrate classes, such as phenols and amides, although the catalytic efficiency with amides is significantly reduced.     

An improved protocol for the Pd-catalyzed alpha-arylation of aldehydes with aryl halides

An improved protocol for the Pd-catalyzed alpha-arylation of aldehydes with aryl halides has been developed. The new catalytic system allows for the coupling of an array of substrates including challenging electron-rich aryl bromides and less reactive aryl chlorides. The utility of this method has been demonstrated in a new total synthesis of (+/-)-sporochnol.     

NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Activation of functional arylzincs prepared from aryl iodides and highly enantioselective addition to aldehydes

An easily available chiral ligand ( S)- 1 is found to activate the nucleophilic reaction of the arylzincs prepared in situ from the reaction of aryl iodides with Et(2)Zn. Both high yields and high enantioselectivity (up to >99% ee) for the reaction of these arylzincs with a variety of aldehydes are obtained. The mild reaction conditions and the good functional group tolerance make this catalytic asymmetric process synthetically useful.     

Direct carbamoylation of aryl halides

[reaction: see text] A carbamoylsilane is shown to carry out the direct carbamoylation of aryl chlorides, bromides, and iodides under catalysis by phosphinepalladium(0) complexes.     

Reusable copper-catalyzed cross-coupling reactions of aryl halides with organotins in inexpensive ionic liquids

A combination of Cu2O nanoparticles with P(o-tol)3 shows highly catalytic activity for the Stille cross-coupling reaction. A series of copper catalysts and ligands were evaluated, and Cu2O nanoparticles combined with P(o-tol)3 provided the best results. In the presence of Cu2O nanoparticles and P(o-tol)3, a variety of aryl halides including aryl chlorides underwent the Stille reaction with organotins smoothly in moderate to excellent yields using inexpensive TBAB (n-Bu4NBr) as the medium. It is noteworthy that the Cu2O/P(o-tol)3/TBAB system can be recovered and reused at least three times without any loss of catalytic activity among the reactions of aryl iodides and activated aryl bromides.