Growth and characterization of tetramethyl ammonium tetrachloro zincate II: A ferroic crystal

Ferroic crystals of tetramethyl ammonium tetrachlorozincate (TMA-ZnCl) were grown by slow evaporation technique and the morphology of the grown crystals varies with different pH values. The compound crystallizes in orthorhombic primitive system at room temperature with non-centro symmetric space group Pmna. The grown crystals were subjected to powder X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, ultraviolet–visible–near-infrared (UV–vis–NIR) spectral studies and thermal studies. Differential scanning calorimetry (DSC) measurement confirms the existence of structural phase transition and the thermogravimetric analysis (TGA) studies reveals that the crystal is thermally stable up to 330 °C. Vicker's microhardness studies expose that the material is mechanically stable up to a load of 60 g. The laser second harmonic generation (SHG) efficiency of the grown crystal was found to be 1.3 times that of potassium dihydrogen orthophosphate (KDP) crystal.     

Synthesis, growth of organic nonlinear optical crystal: Semicarbazone of 2-amino-5-chloro-benzophenone (S2A5CB) and its characterisation

A new organic crystal of semicarbazone of 2–amino–5–chloro–benzophenone has been grown as a single crystal by slow evaporation solution growth technique for the first time in the literature. The grown crystal has been characterised by proton nuclear magnetic resonance spectral analysis and single crystal and powder X-ray diffraction studies. Functional groups of the crystallised molecules were confirmed by FT-IR and FT-Raman analyses. Mechanical strength of the crystals was studied by microhardness test. Optical transparency of the grown crystals has been studied by UV-Visible spectra. The second harmonic generation property of the compound was analysed.     

Growth and characterization of a new nonlinear optical material: Potassium p-nitrophenolate dihydrate (NO2–C6H4–OK·2H2O) with new bonding properties

Single crystals of potassium p-nitrophenolate dihydrate (NPK·2H₂O) have been grown successfully using the isothermal solvent evaporation technique. It is a new semiorganic nonlinear optical crystal, possessing a d_eff of about 1.5 times that of lithium niobate and in which the K⁺ ions are bonded to the nitro group instead of bonding with the phenolic O⁻. Large single crystals of dimension upto 20×6×4 mm³ are harvested within a period of 60 days. The grown crystals are subjected to single crystal X-ray, FTIR and DRS-UV visible spectral, thermal and microhardness analyses. Single crystal X-ray analysis confirms the molecular formula and the structure of the crystal. FTIR spectral studies verify the functional groups present in the crystal. The DRS-UV visible spectrum proved the optical transparency of the crystal in the entire visible and near infrared region. Thermal studies reveal that the crystals are stable upto 180 °C. Microhardness measurements on the cleaved plane (1 1 0) explain the strength and slip direction in the crystal. The SHG efficiency of the crystal is examined by performing the Kurtz powder test using Nd:YAG laser.     

Synthesis, growth, thermal, optical, dielectric and mechanical properties of semi-organic NLO crystal: Potassium hydrogen malate monohydrate

Potassium hydrogen malate monohydrate (PHMM), a semi-organic nonlinear optical material, has been synthesized and single crystals were grown from aqueous solution. Single crystals of PHMM have been grown by slow evaporation of solvent at room temperature up to dimensions of 22 mm×16 mm×14 mm. Single-crystal X-ray diffraction study on grown crystals shows that they belong to monoclinic system and non-centrosymmetry spacegroup Cc. The structural perfection of the grown crystals has been analyzed by high-resolution X-ray diffraction (HRXRD) rocking curve measurements. Fourier transform infrared (FTIR) spectroscopic study was performed for the identification of different modes of functional groups present in the compound. The UV–Vis transmission spectrum has been recorded in the range 200–1100 nm. The thermal stability of the compound has been determined by TG-DTA curves. The dielectric studies were performed. From the microhardness measurements, Vicker's hardness number (H_v), Stiffness constant (C₁₁), fracture toughness (k_c), Brittle index (B_i) and yield strength (σ_y) have been calculated. The Young's modulus was calculated using the Knoop hardness measurement. The SHG relative efficiency of PHMM crystal was found to be 1.2 times higher than that of KDP.     

Synthesis, growth and characterization of Bis S-benzylisothiouronium tetrachlorido zincate (II) a semiorganic nonlinear optical crystal

A new semiorganic nonlinear optical (NLO) crystal, Bis S-benzylisothiouronium tetrachloridozincate (II) (SBTTZ), has been synthesized and good optical quality needle shaped single crystals of the title material were grown by solvent evaporation solution growth method at room temperature. Powder X-ray diffraction pattern confirms the crystallinity of the material. Single X-ray diffraction study was carried out to establish the existence of intermolecular hydrogen bonding in the crystal. The UV–Vis–NIR spectrum indicates that the crystal has very good transmittance in the entire visible and near IR regions of the spectrum suggesting the suitability of the material for NLO applications. The presence of various functional groups was confirmed by FT IR spectroscopic technique. The ¹H NMR spectrum confirms the molecular structure. The thermal and mechanical stabilities have been confirmed by TG/DTA analyses and Vickers microhardness study respectively. The SHG in the grown crystal was identified by modified Kurtz–Perry method using Nd:YAG laser as the source.     

Growth and characterization of diaquatetrakis (thiocyanato) cobalt (II) mercury (II) N-methyl-2-pyrolidone (CMTWMP) single crystals

Single crystals of diaquatetrakis (thiocyanato) cobalt (II) mercury (II) N-methyl-2-pyrolidone, (CoHg(SCN)₄·(H₂O)₂·2(C₃H₆CONCH₃) (abbreviated as CMTWMP) were grown using slow solvent evaporation technique. The structure of the grown crystals was confirmed by single-crystal X-ray diffraction (XRD) technique. The optical properties of the crystals were investigated by Fourier transform infrared (FTIR) and UV–Vis–NIR transmission spectra. The grown crystals of CMTWMP were also subjected to dielectric, photoconductivity, thermal and microhardness studies. The photoconductivity study of CMTWMP confirms the electrochromism behaviour in the sample. The SHG efficiency of the sample was measured by Kurtz and Perry powder technique and its value is almost comparable with KDP.     

Preparation, characterization and non-linear optical properties of pristine m-nitroaniline (m-NA) and its recycled polystyrene (Re-PS) coated single crystals

Meta-nitroaniline (m-NA) is one of the organic single crystals extensively studied due to its high non-linear effect. m-NA is also known to exhibit comparable or even better non-linear optical (NLO) properties than known inorganic materials. In this paper, we report development of m-NA single crystals by solution growth technique using different solvent systems. The size of the single crystal varies depending on solvent. The highest average crystal size acquired was 10 mm×5 mm×5 mm using methyl ethyl ketone and acetone as solvent. These single crystals were characterized using various physico-chemical techniques such as XRD and scanning electron microscopy (SEM). The developed crystals were subsequently coated with recycled polystyrene (Re-PS) (1, 2, 5 and 10 wt% concentrations) to study the effect of polymer coating on the second harmonic generation (SHG) properties of the single crystals. The purpose of polymer coating on m-NA single crystal is to improve surface morphology of crystal (i.e. it makes surface smooth) and to enhance power handling capacity for pulse laser of a crystal which, in turn, improves the SHG intensity. The optimum percentage of coating was determined for the m-NA single crystals obtained from different solvent systems. Furthermore, the polymer coating also plays key role in preventing the degradation of the m-NA crystal (well-known as highly sublime material) and ultimately increasing the shelf life of the crystal for its device application.     

Flux growth of PbMg1/3Ta2/3O3 single crystals

Single crystals of PbMg_1/3Ta_2/3O₃ (PMT) were grown by the flux method. The PbO–Pb₃O₄–B₂O₃ system was used as a solvent. Transparent and light yellow PMT single crystals of rectangular shape and dimensions up to 10×6×4 mm³ were obtained. For the applied growth conditions only, the crystals of the perovskite structure were grown. X-ray diffraction tests showed that at room temperature PMT exhibits cubic symmetry with lattice parameter a=4.042(1) Å. Dielectric studies pointed to relaxor properties of PMT. The characteristic broad and frequency-dependent maximum of dielectric permittivity was observed at 179.7 K (1 kHz).     

Nucleation, growth and characterization of L-tartaric acid—nicotinamide NLO crystals

The solubility, metastable zone width and nucleation parameters of organic nonlinear optical material L-tartaric acid–nicotinamide (LTN) have been determined. The crystals of LTN are grown by the slow cooling method. The grown crystals are morphologically interpreted. The crystalline powder of the grown crystals has been examined by X-ray diffraction and thermogravimetric analysis. The different modes of vibrations present in the crystal are identified by the Fourier infrared spectroscopy analysis. The powder SHG efficiency of LTN is comparable with that of KDP.     

Growth and morphology of ruby crystals with unusual chromium concentration

Single crystals of ruby have been obtained from fluxed melts based on the systems Li₂O–MoO₃, Li₂O–WO₃, Na₂O–WO₃, 2PbO–3V₂O₅, PbO–V₂O₅–WO₃, PbF₂–Bi₂O₃ and Na₃AlF₆ by both the TSSG method and spontaneous crystallization at the temperatures 1330–900 °C. Al₂O₃ solubility has been measured for the flux composition of 2Bi₂O₃–5PbF₂ in the temperature range 1200–1000 °C and dissolution enthalpy has been defined as 29.4 KJ/Mol. The composition of grown crystals was studied by electron microprobe analysis. The synthetic ruby contains from 0.51 to 6.38 at% of chromium admixture depending on the crystal growth conditions. Experimental results on growth conditions, composition and morphology of grown crystals are presented for each flux and temperature interval.     

Floating zone growth of high-quality SrTiO3 single crystals

Strontium titanate single crystals 15–20 mm in diameter and 40–80 mm in length were grown by a floating zone method with radiation heating. Additional crystal heating just below the molten zone by an in-growth annealing furnace was applied in order to lower the temperature gradients and to achieve slower cooling of the grown crystal. The crystal perfection was studied with X-ray topography and double-crystal diffractometry. The most perfect crystals were grown in [0 0 1] direction with single grain rocking curve widths of about 30″ and subgrain misorientations of 1′–3′ over 10×10 mm² areas of the boule cross-section for both (0 0 1)-, (1 1 0)- and (1 1 1)-oriented slices. Such high-quality crystal can be grown reproducibly with starting materials of 4N grade quality.     

Unidirectional seeded single crystal growth from solution of benzophenone

A novel crystal growth method has been established for the growth of single crystal with selective orientation at room temperature. Using volatile solvent, the saturated solution containing the material to be crystallized was taken in an ampoule and allowed to crystallize by slow solvent evaporation assisted with a ring heater. The orientation of the growing crystal was imposed by means of a seed fixed at the bottom of the ampoule. By selecting a suitable ring heater voltage and by controlling the ring heater voltage, nucleation and the growth rate of the crystal were controlled more effectively. By employing this novel method, benzophenone single crystal ingots of diameters 10 and 20 mm and length more than 50 mm were successfully grown using xylene as solvent. The ease in scaling up of diameter from 10 to 20 mm shows the vital advantage of this technique. It was possible to achieve solute–crystal conversion efficiency of 100 percent. The grown benzophenone crystal was characterized by FTIR, TG and DTA, powder X-ray diffraction, X-ray rocking curve, optical transmission study and powder SHG measurement. The results show that the crystal quality is at least as good as the quality of the crystal grown by other known methods. Also, microbial growth was naturally avoided in this method, as the fresh solution is constantly made available for the growing crystal.     

Growth, dielectric, ferroelectric and optical properties of Ca0.28Ba0.72Nb2O6 single crystals

Calcium barium niobate Ca_0.28Ba_0.72Nb₂O₆ (CBN-28) crystals were grown by the Czochralski method. The effective segregation coefficients of Ca, Ba, Na elements in CBN-28 crystal growth were measured, and the rocking curve from 0 0 2 reflection of CBN-28 wafer was also measured by the high-resolution X-ray diffractometer D5005, and the full-width at half-maximum value was measured to be 70.6″. The measured dependence of dielectric constants on temperature showed the Curie temperature of the CBN-28 crystals is between 246.8 and 260 °C. Typical polarization–electric field (P–E) hysteresis loops were measured at room temperature. Ferroelectric 180° domains were observed by scanning electron microscopy (SEM) on the etched (0 0 1) surface of the CBN-28 crystals. The transmittance of [0 0 1]-oriented CBN-28 crystals was measured and the result shows that optical properties of CBN-28 crystal are almost the same as those of SBN for wavelengths between 2500 and 7500 nm.     

Growth and properties of Pb[(Zn1/3Nb2/3)0.91Ti0.09]O3 single crystals directly from melt

Pb[(Zn_1/3Nb_2/3)_0.91Ti_0.09]O₃ (PZNT91/9) single crystals were grown by a modified Bridgman method directly from melt using an allomeric Pb[(Mg_1/3Nb_2/3)_0.69Ti_0.31]O₃ (PMNT69/31) single crystal as a seed. X-ray diffraction (XRD) measurement confirmed that the as-grown PZNT91/9 single crystals are of pure perovskite structure. Electrical properties and thermal stabilization of PZNT91/9 crystals grown directly from melt exhibit different characters from those of PZNT91/9 crystals grown from flux, although segregation and the variation of chemical composition are not seriously confirmed by X-ray fluorescence analysis (XPS). The [0 0 1]-oriented PZNT91/9 crystals cut from the middle part of the as-grown crystal boules exhibit broad dielectric-response peaks at around 105 °C, accompanied by apparent frequency dispersion. The values of piezoelectric constant d₃₃, remnant polarization P_r, and induced strain are about 1800–2200 pC/N, 38.8 μC/cm², and 0.3%, respectively, indicating that the quality of PZNT crystals grown directly from melt can be comparable to those of PZNT91/9 single crystals grown from flux. However, further work deserves attention to improve the dielectric properties of PZNT crystals grown directly from melt. Such unusual characterizations of dielectric properties of PZNT crystals grown directly from melt are considered as correlating with defects, microinhomogeneities, and polar regions.     

Structural, thermal and dielectric studies on a new solution grown 4-dimethylaminopyridinium dihydrogen phosphate crystal

Single crystals of 4-dimethylaminopyridinium dihydrogen phosphate (DMAPDP) (C₇H₁₃N₂PO₄) were grown by the solvent evaporation method. The three-dimensional structure was solved by the single-crystal X-ray diffraction method which belongs to triclinic crystal system and the molecular arrangements in the crystal were studied. The thermal behaviour was investigated using differential scanning calorimetry (DSC) and no phase transition was identified in the temperature region −150 to 230 °C. The thermal parameters—thermal diffusivity (), thermal effusivity (e), thermal conductivity (K) and heat capacity (C_p) of DMAPDP were measured by an improved photopyroelectric technique at room temperature. Dielectric constant and dielectric loss of the grown crystal were evaluated for the frequency range 1–200 KHz in the temperature region 28–135 °C. The Vicker's hardness was measured as 42.2 for a load of 98.07 mN. The laser induced surface damage threshold of DMAPDP crystal was found to be 4.8 GW/cm² with nanosecond Nd:YAG laser.     

Growth and characterization of CdSe single crystals by modified vertical vapor phase method

Good quality, large single crystals of CdSe were grown by the modified growth method (i.e., vertical unseeded vapor phase growth with multi-step purification of the starting material in the same quartz ampoule without any manual transfer between the steps). Lower temperature gradients (8–9°C/cm) at the growth interface were used for the crystal growth. As-grown CdSe crystals was characterized by X-ray diffraction, scanning electron microscopy, energy dispersive analyzer of X-rays, high-resistance instrument measurement, and etch-pit observation. It is found that there are two cleavage faces of (1 0 0) and (1 1 0) orientations on the crystal, the resistivity is about 10⁸ Ω cm, and the density of etch pits is about 10^3–4/cm². The crystal was cut into wafers and was fabricated into detectors. The detectors were tested using an ²⁴¹Am radiation source. γ-ray spectra at 59.5 keV were obtained. The results demonstrated that the quality of the as-grown crystals was good. The crystals were useful for fabrication of room-temperature-operating nuclear radiation detectors. Therefore, the modified growth technique is a promising, convenient, new method for the growth of high-quality CdSe single crystals.     

Environmental SEM investigation on surface defects in 0.92Pb(Zn1/3Nb2/3)O3–0.08PbTiO3 single crystal

In this paper, the technique of environmental scanning electron microscopy (ESEM) has been employed to investigate the surface defects of the (1 1 1) appearing face in 0.92Pb(Zn_1/3Nb_2/3)O₃–0.08PbTiO₃ (PZN–8%PT) crystals. From the ESEM images, we succeeded in observing and studying the growth hillocks and etch pits, low-angle grain boundaries, and sub-grain boundaries in (1 1 1) face, which were related to the generation of dislocation and stacking faults, respectively. On the other hand, an image of a unique multi-layer lamellar structure and fine step structure obtained in the (1 1 1) face reveals that the dominant fast growth mechanism of PZN–8%PT crystal grown by the flux method is a sub-step mechanism, unlike the screw dislocation growth mechanism.     

Growth and spectroscopic properties of Er single doped and Er–Yb co-doped YAl3(BO3)4 crystals

Er³⁺-doped and Er³⁺–Yb³⁺ co-doped yttrium aluminum borate (YAB) single crystals have been grown by the top-seeded solution growth method using a new flux system, namely NaF–MoO₃–B₂O₃. The Er³⁺ concentrations were 1.3 mol% for both single doped and co-doped crystals and the Yb³⁺ concentration in the Er³⁺–Yb³⁺ co-doped crystal was 20.0 mol% in the raw materials. The distribution coefficients of Er³⁺ single doped and Er³⁺–Yb³⁺ co-doped crystals were measured. The polarized absorption and fluorescence spectra of Er³⁺–Yb³⁺ co-doped crystal were recorded and compared with those of Er³⁺ single doped crystal. The results demonstrate that Er³⁺–Yb³⁺ co-doped YAB crystal is a potential candidate for 1.55 μm laser materials.     

The influences of supersaturation on LPE growth of GaN single crystals using the Na flux method

The dependency of LPE growth rate and dislocation density on supersaturation in the growth of GaN single crystals in the Na flux was investigated. When the growth rate was low during the growth of GaN at a small value of supersaturation, the dislocation density was much lower compared with that of a substrate grown by the Metal Organic Chemical Vapor Deposition method (MOCVD). In contrast, when the growth rate of GaN was high at a large value of supersaturation, the crystal was hopper including a large number of dislocations. The relationship between the growth conditions and the crystal color in GaN single crystals grown in Na flux was also investigated. When at 800 °C the nitrogen concentration in Na–Ga melt was low, the grown crystals were always tinted black. When the nitrogen concentration at 850 °C was high, transparent crystals could be grown.     

The temperature gradient technique (TGT) growth and optical properties of Yb-doped YAlO3 single crystal

The dark-brown colored 5 at% Yb-doped YAlO₃ (Yb:YAP) single crystal was grown successfully by temperature gradient technique (TGT) for the first time. The TGT-grown Yb:YAP crystal with the perovskite structure and excellent crystallization perfection were confirmed by the X-ray diffractions techniques. The dark-brown color of TGT-Yb:YAP crystal turned into the colorless after annealing in the air at 1200 °C for 10 h. The absorption spectra, LD-excited infrared emission and X-ray excited luminescence spectra of the air-annealed Yb:YAP single crystal were investigated at the room temperature. The results indicate that the TGT-Yb:YAP single crystals can be used for the laser and scintillation applications.