Simultaneous determination of iron(II) and iron(III) in aqueous solution by kinetic spectrophotometry with tiron

A kinetic spectrophotometric method that requires no prior measurement of rate constants is developed for the simultaneous determination of iron(II) and iron(III). The method is based on the aerial oxidation of iron(II) in the presence of tiron and acetate ions. The iron(III) formed is subsequently complexed with tiron and the absorbance/time relation is evaluated. The concentrations of iron(III) and iron(II) are obtained from the absorbance values at the start and at equilibrium, respectively, calculated by non-linear least-squares fitting. A linear calibration graph is obtained up to 12 μg ml^?1 iron(II)/iron(III). The method is applied to iron-rich ground water.     

Permanganate oxidation of chromium(III) in aqueous alkaline medium: a kinetic study by the stopped-flow technique

Permanganate oxidation of CrIII in aqueous medium (pH>;12) at25°C has been studied by the stopped-flow technique, combined with a rapid scan spectrophotometry, and obeys the rate equation:¶ where K is the formation constant of the MnVII-CrIII adduct and k is the rate constant for its decomposition. The rate is independent of [OH–]. The active oxidant and reductant species are understood to be [MnO4]– and [Cr(OH)4]–, respectively.     

Diastereoselective Ion Pairing of TRISPHAT Anions and Tris(4,4′-dimethyl-2,2′-bipyridine)iron(II)

Two configurationally stable, chiral anions (TRISPHAT, 1 ) behave as efficient hosts that control the configuration of a configurationally labile iron(II ) complex as the guest with high diastereoselectivity (>96 % de) upon ion pairing. The diastereoselectivity increases with decreasing solvent polarity.     

Oxidative degradation of levofloxacin by water-soluble manganese dioxide in aqueous acidic medium: a kinetic study

Pharmaceuticals, especially fluoroquinolone antibiotics, have received increasing global concern, due to their intensive use in the environment and potential harm to ecological system as well as human health. Degradation of antibiotics, such as oxidative degradation by metal oxides, often plays an important role in the elimination of antibiotics from the environment. The kinetics of oxidation of levofloxacin by water-soluble manganese dioxide has been studied in aqueous acidic medium at 25 °C temperature. The stoichiometry for the reaction indicates that the oxidation of 1 mol of levofloxacin requires 1 mol of manganese dioxide. The reaction is second order, that is first order with respect to manganese dioxide and levofloxacin. The rate of reaction increases with the increasing [H⁺] ion concentration. A probable reaction mechanism, in agreement with the observed kinetic results, has been proposed and discussed. The energy and enthalpy of activation have been calculated to be 30.54 and 28.07 kJ mol^?1, respectively.     

A semiempirical MO study of the electronic structure and excited states of the Tris(2,2′-bipyridyl)Iron(II) and Tris(glyoxal-Bis-N-methylimine)iron(II)Ions

A semi-empirical SCF-MO method, the PEEL method, has been applied in an investigation of the electronic structure and excited states of two iron compounds, [Fe(II)-(GMI)₃]⁺⁺ and [Fe(II)-(bipy)₃]⁺⁺.The electronic absorption spectra have been recorded. The calculations show that it is necessary to account for the trigonal distortion and the covalency in order to explain these spectra quantitatively. Mössbauer measurements have also been performed. The calculated electronic population of the iron is in accord with Mössbauer isomer shift data, indicating that a realistic electron distribution has been obtained by the PEEL method.

---

Zusammenfassung Eine semiempirische SCF-MO-Methode, die PEEL-Methode, wurde zur Untersuchung der Elektronenstruktur sowie von angeregten Zuständen der beiden Eisenverbindungen [Fe(II)-(GMI)₃]⁺⁺ und [Fe(II)-(bipy)₃]⁺⁺ angewendet.Die elektronischen Absorptionsspektren wurden aufgenommen. Die Berechnungen zeigen, daß die trigonale Verzerrung und die Kovalenz berücksichtigt werden müssen, um die Spektren quantitativ zu erklären. Mössbauer-Messungen wurden ebenfalls durchgeführt. Die berechnete Elektronenverteilung am Eisenatom ist in Übereinstimmung mit den Daten der Isomerenverschiebung der Mössbauer-Messungen, wodurch gezeigt wird, daß mit der PEEL-Methode eine realistische Elektronen-Verteilung erhalten wurde.

---

Résumé Une méthode SCF-MO semi-empirique, la méthode PEEL, a été appliquée à une étude de la structure électronique et des états excités de deux composés ferreux: [Fe(II)-(bipy)₃]⁺⁺ et [Fe(II)-(GMI)₃]⁺⁺. Les spectres d'absorption électronique ont été enregistrés. Les calculs montrent qu'il est nécessaire de rendre compte de la distorsion trigonale et de la covalence pour expliquer ces spectres quantitativement.Des mesures de l'effet Mössbauer ont aussi été effectuées. La population électronique calculée du fer est en bon accord avec les données sur le déplacement isomérique de Mössbauer, ce qui indique que la méthode PEEL fournit une distribution électronique réaliste.

     

Ligand Substitution Reaction of Bis(ethylenediamine)glycinatocobalt(III) Complex with Ethylenediamine Catalyzed by the Photo-excited Tris(2,2′-bipyridine)ruthenium(II) Complex

Substitution reaction with ethylenediamine of coordinated glycinate ligand in bis(ethylenediamine)-glycinatocobalt(III) complex has been studied in the presence of photo-excited tris(2,2′-bipyridine)ruthenium(II) complex in alkaline aqueous solution (buffered around pH 12) containing 1.0M chloride ion at 25°C. VIS absorption and CD spectra were used for the racemate and the optically active isomers of the Co(III) complexes, respectively. The reaction was catalyzed by the excited Ru(II) complex to give tris(ethylenediamine)cobalt(III) complex. Mechanism of the ligand-substitution reaction and role of the excited Ru(II) complex were discussed.     

Thin-layer chromatography of tris(1,10-phenanthroline)iron(II) and tris(2,2′-bipyridine)iron(II) on Sephadex G gels

Summary Gel chromatographic behaviour of tris(1, 10-phenanthroline)iron(II), tris(2,2′-bipyridine)iron(II) and tris(glycinato)cobalt(III) on Sephadex G-10 or G-25 was investigated by TLC with 0.001–1.0M NaCl as the eluent. The zone shapes and R_M values of tris(1,10-phenanthroline)iron(II) and tris(2,2′-bipyridine)iron(II) were appreciably dependent on the sample and eluent concentration, while the neutral complex, tris(glycinato) cobalt(III), exhibited the round zones with constant R_M values. The order of R_M values was found to be tris(glycinato)cobalt(III<tris(2,2∔pyridine)iron(II)<tris-(1,10-phenanthroline)iron(II) in all systems studied, although the reverse trend was expected when assuming the chromatographic behaviour of solute compounds to be controlled by the “sieving effect”. The comparison of the behaviour on Sephadex G gels with that on CM-cellulose revealed that the predominant mechanism involved is not the sieving effect, but ion-exchange and/or hydrophobic interaction.     

Mechanistic studies on oxidation of hydrazine by a mu-oxo diiron(III,III) complex in aqueous acidic media-proton coupled electron transfer

[Fe2(mu-O)(phen)4(H2O)2]4+ (1), one of the simplest mu-oxo diiron(III) complexes, quantitatively oxidises hydrazine to dinitrogen and itself is reduced to two moles of ferroin, [Fe(phen)3]2+ in presence of excess phenanthroline. The weak dibasic acid, 1 (pKa1= 3.71 +/- 0.05 and pKa2= 5.28 +/- 0.10 at 25.0 degrees C, I= 1.0 mol dm(-3)(NaNO3)) and its conjugate bases, [Fe2(mu-O)(phen)4(H2O)(OH)]3+ (2) and [Fe2(mu-O)(phen)4(OH)2]2+ (3) are involved in the redox process with the reactivity order 1 > 2 > 3 whereas N2H4 and not N2H5+ was found to be reactive in the pH interval studied 3.45-5.60. Cyclic voltammetric studies indicate poor oxidizing capacity of the title substitution-labile diiron complex, yet it oxidizes N2H4 with a moderate rate--a proton coupled electron transfer (1e, 1H+) drags the energetically unfavourable reaction to completion. The rate retardation in D2O media is substantially higher at higher pH due to the increasing basicity of the oxo-ligand in the order 3 > 2 > 1. Marcus calculations result an unacceptably high one-electron self-exchange rate for the iron center indicating an inner-sphere nature of the electron-transfer.     

Complexation of cobalt(II) with histidinato(pentaammine)cobalt(III) in aqueous medium. A kinetic and mechanistic study

Summary The kinetics of formation and dissociation of the binuclear complex of Co^II with histidinato(pentaammine)Co^III have been studied at 10.0°Ct°C25°C and I = 0.3 mol dm^–3 (ClO _inf4 ^sup– ). The formation of the binuclear complex, [(NH₃)₅Co^IIILCo^II]⁴⁺ (L = histidinate), in the 5.7–6.8 pH range involves the reaction of Co(OH₂) _inf6 ^sup2+ with the deprotonated, (NH₃)₅CoL²⁺, and monoprotonated, (NH₃)₅CoLH₃₊, forms of the complex. The rate and activation parameters for the formation are consistent with an I _d mechanism. The binuclear species undergoes dissociation to yield the parent Co^III substrate and Co(OH₂) _inf6 ^sup2+ via spontaneous and acid-catalysed paths. Comparison of spontaneous dissociation rate of the binuclear complex with other related systems indicated the chelate nature of the binuclear species.     

Manganese(II) catalysed oxidation of glycerol by cerium(IV) in aqueous sulphuric acid medium: a kinetic and mechanistic study

The manganese(II) catalysed oxidation of glycerol by cerium(IV) in aqueous sulphuric acid has been studied spectrophotometrically at 25 °C and I = 1.60 mol dm⁻³. Stoichiometry analysis shows that one mole of glycerol reacts with two moles of cerium(IV) to give cerium(III) and glycolic aldehyde. The reaction is first order in both cerium(IV) and manganese(II), and the order with respect to glycerol concentration varies from first to zero order as the glycerol concentration increases. Increase in sulphuric acid concentration, added sulphate and bisulphate all decrease the rate. Added cerium(III) retards the rate of reaction, whereas glycolic aldehyde had no effect. The active species of oxidant and catalyst are Ce(SO₄)₂ and [Mn(H₂O)₄]²⁺. A mechanism is proposed, and the reaction constants and activation parameters have been determined.     

Kinetics and mechanism of the reduction of tetrachloroaurate(III) by formate in acidic aqueous solution

Rate data for the reduction of AuCl₄⁻ by formate, were measured at different temperatures, formate, hydrogen and chloride ion concentrations. AuCl₄⁻ and AuCl₃(OH)⁻ react with HCOOH and HCOO⁻ in the rate-determining steps of the suggested reaction mechanism to produce AuCl₃(HCOO)⁻. The latter species undergoes a rapid redox reaction in which AuCl₂⁻, Au(o) and CO₂ are produced.     

Some aspects of the solvent extraction of Fe(II) and Fe(III) from an aqueous acidic medium containing Cr(III)

The separation of Fe(II) and Fe(III) from an aqueous acidic sulphate medium containing Cr(III) was investigated. It was found that the Fe(II) and Fe(III) can be removed from the aqueous phase using Aliquat 336 thiocyanate as solvent extractant. The Fe(II) is extracted as the Fe(NCS)₄²⁻ species while Fe(III) is extracted as Fe(NCS)₅²⁻ species. The effects of pH, extractant concentration and thiocyanate added to the aqueous phase were investigated.     

Surface enhanced raman and resonance raman spectroscopy in a non-aqueous electrochemical environment: Tris(2,2′-bipyridine)ruthenium(II) adsorbed on silver from acetonitrile

This letter reports the first observation of both surface enhanced Raman scattering (SERS) and surface enhanced resonance Raman scattering (SERRS) from the transition metal complex tris(2,2′-bipyridine)ruthenium (II), Ru(bpy)₃²⁺, adsorbed on a silver electrode from acetonitrile (ACN). The assignment of these spectra as valid examples of SERS and SERRS in a non-aqueous environment is based on the following criteria: (1) in situ demonstration of monolayer surface coverage of Ru(bpy)₃²⁺ using double potential step chronocoulometry (DPSCC); (2) the Raman signals are most intense after surface roughening by anodization; (3) the Raman spectra are potential dependent in the non-faradaic potential region; (4) the measured enhancement factors are greater ilian 10⁶; (5) the surface spectra are frequency shifted relative to their bulk counterpart; and (6) several other molecules also exhibit non-aqueous SERS and SERRS behavior. These results are highly significant in that generality of surface enhanced Raman spectroscopy has been extended into the rich domain of nonaqueous electrochemistry.     

Oxidation of vanillin by diperiodatocuprate(III) in aqueous alkaline medium: A kinetic and mechanistic study by stopped flow technique

The kinetics of oxidation of vanillin (VAN) by diperiodatocuprate(III) (DPC) in alkaline medium at a constant ionic strength of 0.50 mol dm^?3 was studied spectrophotometrically. The reaction between DPC and vanillin in alkaline medium exhibits 1:2 stoichiometry (vanillin: DPC). The reaction is of first order in [DPC] and has less than unit order in both [VAN] and [alkali]. Intervention of free radicals was observed in the reaction. Increase in periodate concentration decreases the rate. The oxidation reaction in alkaline medium has been shown to proceed via a monoperiodatocuprate(III)–vanillin complex, which decomposes slowly in a rate‐determining step followed by other fast steps to give the products. The main products were identified by spot test, IR, and MS studies. The reaction constants involved in the different steps of the mechanism are calculated. The activation parameters with respect to slow step of the mechanism are computed and discussed, and thermodynamic quantities are also determined. © 2007 Wiley Periodicals, Inc. 39: 236–244, 2007     

Studies on dehydration and thermal decomposition of Tris(2,2′-Bipyridyl) ruthenium(II) chloride and sulphate

Tris(bipyridyl) ruthenium(II) chloride and sulphate have been synthesized and investigated using thermal analysis. It follows from the experimental data that both compounds are heptahydrates stable at room temperature.The [Ru(bipy)₃]²⁺ complex is stable up to 300, irrespective of the nature of the anion bound with it. The final decomposition product of the chloride is metallic ruthenium, while that of the sulphate is ruthenium dioxide.

---

Zusammenfassung Tris(bipyridyl) ruthenium(II)-chlorid und -sulfat wurden synthetisiert und thermoanalytisch untersucht. Beide Verbindungen sind Heptahydrate und stabil bei Raumtemperatur. Der [Ru(byp)₃]²⁺-Komplex ist stabil bis 300 C, unabhÄngig von der Art des Anions. Endprodukt der Zersetzung des Chlorids ist metallisches Ruthenium, der des Sulfats dagegen Rutheniumdioxid.

---

() . , , . Ru() ₃ ²⁺ , , 300. , — .

     

Iridium(III) catalyzed oxidation of iodide ions in aqueous acidic medium

Oxidation of iodide ions by K₃Fe(CN)₆, catalyzed by hydrogen ions obtained from hydrochloric acid was found to be further catalyzed by iridium(III) chloride. Rate, when the reaction is catalyzed only by the hydrogen ions, was separated from the rate when iridium(III) and H⁺ions both, catalyze the reaction. Reactions studied separately in the presence as well as in the absence of IrCl₃ under similar conditions were found to follow second order kinetics with respect to [I⁻]. While the rate showed direct proportionality with respect to [K₃Fe(CN)₆] and [IrCl₃]. At low concentrations the reaction shows direct proportionality with respect to [H⁺] which tends to become proportional to the square of hydrogen ions at higher concentrations. Strong retarding affect of externally added hexacyanoferrate(II) ions was observed in the beginning but further addition affects the rate to a little extent. Changes in [Cl⁻] and also ionic strength of the medium have no effect on the rate. With the help of the intercept of catalyst graph, the extent of the reaction, which takes place without adding iridium(III), was calculated and was found to be in accordance with the values obtained from the separately studied reactions in which only H⁺ ions catalyze the reaction. It is proposed that iridium forms a complex, which slowly disproportionates into the rate-determining step. Thermodynamic parameters at four different temperatures were calculated.     

Influence of copper(II) catalyst on the oxidation of l-histidine by platinum(IV) in alkaline medium: a kinetic and mechanistic study

The kinetics of oxidation of l-histidine (His) by platinum(IV) in the absence and presence of copper(II) catalyst was studied using spectrophotometry in alkaline medium at a constant ionic strength of 0.1 mol dm^?3 and at 25 °C. In both cases, the reactions exhibit a 1:1 stoichiometry ([His]:[Pt^IV]). The rate of the uncatalyzed reaction is dependent on the first power of each of the concentrations of oxidant, substrate and alkali. The catalyzed path shows a first-order dependence on both [Pt^IV] and [Cu^II], but the order with respect to both [His] and [OH^?] is less than unity. The rate constants increase with increasing ionic strength and dielectric constant of the medium. The catalyzed reaction has been shown to proceed via formation of a copper(II)^_histidine intermediate complex, which reacts with the oxidant by an inner-sphere mechanism leading to decomposition of the complex in the rate-determining step. Platinum(IV) is reduced to platinum(II) by the substrate in a one-step two-electron transfer process. This is followed by other fast steps, giving rise to the oxidation products which were identified as 2-imidazole acetaldehyde, ammonia and carbon dioxide. A tentative reaction mechanism is suggested, and the associated rate laws are deduced. The activation parameters with respect to the slow step of the mechanism are reported and discussed.