Synthesis of phenazine derivatives for use as precursors to electrochemically generated bases

1,6-Disubstituted phenazine derivatives for use as precursors to electrochemically generated bases have been synthesized from readily available starting materials. Reaction of 1,6-dihydroxyphenazine with 1,10-diododecane, 1,11-diiodo-3,6,9-trioxaundecane or (R,R)-(-)-1,2-bis(3-iodopropoxy)cyclohexane gave planar chiral phenazinophanes containing ether-linked bridges; molecular structures of all these compounds have been determined by X-ray crystallography. Substituted 1,6-diaminophenazines were prepared by palladium-mediated amination of 1,6-dichlorophenazine and acylation of 1,6-diaminophenazine followed by reduction. Reaction of 1,6-bis(alkylamino)phenazines with sebacoyl chloride gave planar chiral phenazinophanes containing amide-linked bridges.     

Observation of 1,6-anhydro-beta-maltose and 1,6-anhydro-beta-D-glucopyranose complexed with rubidium by NMR spectroscopy and electrospray ionization mass spectrometry.

A complex of 1,6-anhydro-beta-maltose with rubidium and that of 1,6-anhydro-beta-D-glucopyranose with rubidium were characterized using 87Rb NMR spectroscopy, diffusion-ordered NMR spectroscopy (DOSY) and electrospray ionization mass spectrometry (ESI-MS). Although subtle differences were observed in the 1H chemical shifts of 1,6-anhydro-beta-maltose in between the presence and absence of rubidium in deuterium oxide, measurements of the spin-lattice relaxation time (T1) of the 87Rb nucleus, the diffusion coefficients of 1,6-anhydro-beta-maltose using 1H DOSY and ESI-MS indicated the complex formation of 1,6-anhydro-beta-maltose with rubidium. The complex formation with rubidium was also identified for 1,6-anhydro-beta-D-glucopyranose using NMR and ESI-MS techniques.     

Chemo-selective Suzuki–Miyaura reactions: Synthesis of highly substituted [1,6]-naphthyridines

The Suzuki-Miyaura reaction of methyl-5-bromo-8-(tosyloxy)-1,6-naphthyridine-7-carboxylate(5),with 2 equiv. of arylboronic acids gave diarylated product, 5,8–diaryl-1,6-naphthyridine-7-carboxylate(7), whereas 1 equiv. of arylboronic acid resulted in site-selective formation of 5-aryl-8-(tosyloxy)-1,6-naphthyridine-7-carboxylate(8). The reactions proceeded with excellent chemo-selectivity in favor of the bromide group. Likewise, one-pot reaction with completely different boronic acids by sequential addition produced 1,6-naphthyridine-7-carboxylates,(10) containing two different aryl groups at 5 and 8 positions.     

Acid-catalyzed polymerization of 1,6-anhydro-β-D-glucopyranose

A number of 1,6-anhydrides were polymerized in the melt at 115°C by use of monochloroacetic acid as catalyst. In the early stages of polymerization (up to 40–50% monomer consumed), each monomer was found to disappear by a first-order rate process. The 1,6-anhydrides investigated and their relative rates of polymerization were: 1,6-anhydro-2-O-methyl-β-D -glucopyranose, 1.0; 1,6-anhydro-3,4-di-O-methyl-β-D -glucopyranose, 1.4; 1,6-anhydro-2-O-methyl-β-D -galactopyranose, 2.3; 1,6-anhydro-3-O-methyl-β-D -glucopyranose, 2.6; 1,6-anhydro-4-O-methyl-β-D -glucopyranose, 6.3; 1,6-anhydro-4-O-(β-D -glucopyranosyl) β-D -glucopyranose, 9.0; 1,6-anhydro-β-D -galactopyranose, 17; 1,6-anhydro-β-D -glucopyranose, 37; 1,6-anhydro-β-D -mannopyranose, 91; and 1,6-anhydro-2-deoxy-β-D -arabino-hexopyranose, 240. The effect of substitution on the rate of polymerization suggests this reaction is mechanistically related to the acid hydrolysis of pyranosides. The results suggest that polymerization proceeds in two stages: (1) an initial build-up of dimer followed by (2) a slower growth to higher molecular weight material.     

Skeletal rearrangements resulting from reactions of 1,6:2,3- and 1,6:3,4-dianhydro-β-D-hexopyranoses with diethylaminosulphur trifluoride

A complete series of eight 1,6:2,3- and 1,6:3,4-dianhydro-β-D-hexopyranoses were subjected to fluorination with DAST. The 1,6:3,4-dianhydropyranoses yielded solely products of skeletal rearrangement resulting from migration of the tetrahydropyran oxygen (educts of D-altro and D-talo configuration) or of the 1,6-anhydro bridge oxygen (D-allo, D-galacto). The major products yielded by the 1,6:2,3-dianhydropyranoses were compounds arising from nucleophilic substitution, with configuration at C4 either retained (D-talo, D-gulo) or inverted (D-manno), or from C6 migration (D-allo). The minor products in the 1,6:2,3-series resulted from migration of the tetrahydropyran oxygen (D-gulo) or the oxirane oxygen (D-manno), or from nucleophilic substitution with retention of configuration (D-manno). The structure of most of the rearranged products was verified by X-ray crystallography.     

Determination of fructose 1,6-bisphosphate using a double-receptor sandwich type fluorescence sensing method based on uranyl–salophen complexes

In this paper, we report a double-receptor sandwich type fluorescence sensing method for the determination of fructose bisphosphates (FBPs) using fructose 1,6-bisphosphate (F-1,6-BP) as a model analyte based on uranyl–salophen complexes. The solid phase receptor is an immobilized uranyl–salophen (IUS) complex which is bound on the surface of glass slides by covalent bonds. The labeled receptor is another uranyl–salophen complex containing a fluorescence group, or uranyl–salophen–fluorescein (USF). In the procedure of determining F-1,6-BP in sample solution, F-1,6-BP is first adsorbed on the surface of the glass slide through the coordination reaction of F-1,6-BP with IUS. It then binds USF through another coordination reaction to form a sandwich-type structure of IUS-F-1,6-BP-USF. The amount of F-1,6-BP is detected by the determination of the fluorescence intensity of IUS-F-1,6-BP-USF bound on the glass slide. Under optimal conditions, the linear range for the detection of F-1,6-BP is 0.05–5.0 nmol mL⁻¹ with a detection limit of 0.027 nmol mL⁻¹. The proposed method has been successfully applied for the determination of F-1,6-BP in real samples with satisfactory results.     

Separation and quantitation of fructose-6-phosphate and fructose-1 ,6-diphosphate by LC-ESI-MS for the evaluation of fructose-1,6-biphosphatase activity

An LC-ESI-MS method was developed for the identification and quantification of fructose-1,6-biphosphate (F1,6BP) and fructose-6-phosphate (F6P), respectively the substrate and the product of the enzymatic reaction catalysed by fructose-1,6-bisphosphatase (F1,6BPase). F1,6BPase, expressed predominantly in liver and kidney, is one of the rate-limiting enzymes of hepatic gluconeogenesis and has become a target for the development of new drugs for type 2 diabetes. The two sugar phosphates were separated on a Phenomenex Luna NH2 column (150 mm x 2.0 mm id) using the following mobile phase: 5 mM triethylamine acetate buffer/ACN (80:20) v/v in a linear pH gradient (from pH = 9 to 10 in 15 min) at the flow rate of 0.3 mL/min. The detection was performed with an IT mass spectrometer in negative polarity (full scan 100-450 m/z) and in SIM mode on the generated anions at m/z = 339 (F1,6BP) and m/z = 259 (F6P). Under the optimised final conditions, the method was validated for accuracy, specificity, precision (inter- and intradays RSD comprised between 1.0 and 6.3% over the range of concentrations used), linearity (50-400 microM), LODs (0.44 microM) and LOQs (1.47 microM), and the method was applied to F6P determination in the F1,6BPase catalysed hydrolysis of F1,6BP.     

Fe‐catalyzed hydrohalogenative cyclization of cyclohexadienone‐containing enynes

A Fe‐catalyzed hydrohalogenative cyclization of cyclohexadienone‐containing 1,n‐enynes to give three different types of compounds is discussed. 1,6‐enynes with a stoichiometric amount of FeX₃ provided cis‐hydrobenzofurans with moderate stereoselectivity, whereas the reaction with TMSX (X = Cl, Br) as the halide source in the presence of Fe catalyst improved the stereoselectivity of halide addition highly. The alkyl vs aryl shows difference that the reaction of 1,6‐enynes bearing an alkylethynyl group gave meta alkenated phenols (2 examples) whereas a similar reaction of 1,6‐enynes with an arylethynyl group delivered only cis‐hydrobenzofurans (12 examples). 1,7‐enynes afforded tricyclic products (4 examples). The different reactivity of 1,6‐ and 1,7‐enynes is probably influenced by the formation of a six‐membered chair‐like intermediate in 1,6‐enynes.     

Transannular oxidation of bis-arylhydrazones of cyclodecan-1,6-dione

Oxidation of the title compounds (1) with lead tetraacetate at room temperature leads to the formation of 9,10-bis-arylazo-decalines (2) via a transannular reaction, as well as to 1,6-bis-acetoxy-1,6-bis-arylazo-cyclodecanes (3).     

Conformation inversion of an inositol derivative by use of silyl ethers: a modified route to 3,6-di-O-substituted-L-ido-tetrahydroxyazepane derivatives

The trans-diequatorial 3,4-diol of 2,5-di-O-benzyl-D-chiro-inositol cleaved selectively with the periodate ion in the presence of the trans-diaxial 1,6-diol to give a dialdehyde (dialdose) from which 3,6-di-O-benzyl-D-manno-tetrahydroxyazepane (1) was made. The trans-diaxial 1,6-diol of 3,4-di-O-allyl-2,5-di-O-benzyl-D-chiro-inositol was not cleaved satisfactorily by periodate, but replacement of the allyl substituents with tert-butyldimethylsilyl groups caused conformational inversion of the inositol ring, and the resulting trans-diequatorial 1,6-diol cleaved efficiently to give a dialdehyde from which 3,6-di-O-benzyl-L-ido-tetrahydroxyazepane (2) can be prepared.     

Enantioselective Rhodium‐Catalyzed Cycloisomerization of (E)‐1,6‐Enynes

An enantioselective rhodium(I)‐catalyzed cycloisomerization reaction of challenging (E)‐1,6‐enynes is reported. This novel process enables (E)‐1,6‐enynes with a wide range of functionalities, including nitrogen‐, oxygen‐, and carbon‐tethered (E)‐1,6‐enynes, to undergo cycloisomerization with excellent enantioselectivity, in a high‐yielding and operationally simple manner. Moreover, this Rh^I‐diphosphane catalytic system also exhibited superior reactivity and enantioselectivity for (Z)‐1,6‐enynes. A rationale for the striking reactivity difference between (E)‐ and (Z)‐1,6‐enynes using Rh^I‐BINAP and Rh^I‐TangPhos is outlined using DFT studies to provide the necessary insight for the design of new catalyst systems and the application to synthesis.     

Rhodium-catalyzed reductive cyclization of 1,6-diynes and 1,6-enynes mediated by hydrogen: catalytic C-C bond formation via capture of hydrogenation intermediates

Catalytic hydrogenation of carbon-, nitrogen- and oxygen-tethered 1,6-diynes 1a-9a and 1,6-enynes 10a-18a using cationic Rh(I) precatalysts at ambient temperature and pressure enables reductive carbocyclization to afford 1,2-dialkylidene cyclopentanes 1b-9b and monoalkylidene cyclopentanes 10b-18b, respectively, in good to excellent yields and as single alkene stereoisomers. Notably, the 1,3-diene and alkene containing cyclization products 1b-9b and 10b-18b are not subject to over-reduction under the conditions of catalytic hydrogenation in which they are formed. Reductive cyclization 1,6-diyne 1a and 1,6-enyne 10a performed under an atmosphere of D(2) provides the carbocyclization products deuterio-1b and deuterio-10b, respectively, which incorporate two deuterium atoms. The collective data are consistent with a catalytic mechanism involving heterolytic activation of elemental hydrogen (H(2) + Rh(+)X(-) --> Rh-H + HX) followed by Rh(I)-mediated oxidative cyclization of the 1,6-diyne or 1,6-enyne substrates to afford (hydrido)Rh(III)-based metallocyclopentadiene and metallocyclopentene intermediates, respectively. These transformations represent the first examples of metal-catalyzed reductive carbocyclization mediated by hydrogen.     

Thermospray mass spectrometry of aliphatic diamines derivatized with trifluoroethyl chloroformate,with special reference to the biological monitoring of hexamethylenediisocyanate (HDI) and isophoronediisocyanate (IPDI)

Chromatographia - 1,6-Diaminohexane (DAH, 1,6-hexamethylene diamine) and isophorone diamine (IPDA) have been derivatized with trifluoroethyl chloroformate (TFECF) using a two-phase procedure....     

Reactivity of (2,4-cycloheptadiene-1,6-dione)Fe(CO)3: synthesis of hinokitiol and (7,8-diphenylheptatriafulvalene-1,6-quinone)Fe(CO)3

The reactivities of tricarbonyl(2,4-cycloheptadiene-1,6-dione)iron toward several kinds of nucleophiles and electrophiles were investigated. As a result, it was found that tricarbonyl(2,4-cycloheptadiene-1,6-dione)iron has several reaction sites and undergoes several types of reactions. A new synthetic route to hinokitiol and tricarbonyl-(7,8-diphenylheptariafulvalene-1,6-quinone)iron from (2,4-cycloheptadiene-1,6-dione)iron was explored.     

Trace analysis of airborne 1,6-hexamethylenediisocyanate and the related aminoisocyanate and diamine by glass capillary gas chromatography

A capillary gas chromatographic method was developed for the analysis of complex air mixtures of 1,6-hexamethylenediisocyanate, 1,6-hexamethyleneaminoisocyanate and 1,6-hexamethylenediamine. The method is based on derivatization in the sampling step of the reactive isocyanate groups to corresponding urethane groups by the alkaline ethanolic solvent and a subsequent derivatization of remaining amino groups to amide groups with heptafluorobutyric acid anhydride. The overall procedure, including sampling, gave a linear response at air concentrations of 3-300 micrograms/m3 for 1,6-hexamethylenediisocyanate with a precision of ca. 4% at 15 micrograms/m3 and a detection limit of ca. 0.2 microgram/m3 using nitrogen selective detection. In a field measurement of air concentrations in welding work on lacquered metal parts at a motor-car workshop, concentrations of 1,6-hexamethylenediisocyanate above 600 micrograms/m3 were found. Also 1,6-hexamethyleneaminoisocyanate and 1,6-hexamethylenediamine were found at concentrations of the order of 15% of the 1,6-hexamethylenediisocyanate concentration.     

Enzyme-catalyzed syntheses of poly(1,6-hexanediyl maleate) and poly(1,6-hexanediyl fumarate) in organic medium

The lipase-catalyzed preparation of poly(1,6-hexanediyl maleate) by transesterification of 1,6-hexanediol and dimethyl maleate is described. A configurationally pure poly(1,6-hexanediyl maleate) exhibiting exclusively cis structure was obtained. During the reaction, a substantial amount of macrolactones was formed. They were isolated, and the cyclic oligomer with y = 2 was found to predominate. Cycles are semi-crystalline, while no melting point was detected for the linear poly(1,6-hexanediyl maleate). We assume that the linear unsaturated polyester is completely amorphous owing to its cis configuration.     

The preparation of some reactive 1,6-disubstituted perfluorohexanes

Reactive 1,6-disubstituted perfluorohexanes have been prepared $\text{via}$ the reaction of 1,6-$\text{bis}$(dimethylhydrosilyl)-perfluorohexanes with alkyllithium and Grignard reagents. The resulting species may be derivatized in the same manner as organolithium reagents, but are appreciably more stable than the 1,6-dilithioperfluorohexane which is presumably generated by the halogen-metal exchange between an alkyllithium reagent and Br(CF₂)₆Br. 1,6-bis(Bromomagnesium)-perfluorohexane was also prepared in good yield by a halogen-metal exchange reaction.     

Nickel-catalyzed indium(I)-mediated double addition of aldehydes to 1,3-dienes

In the presence of InI, Ni(acac)2 and PPh3, several 1,3-dienes were reacted with two molecules of aldehyde to give the corresponding 1,4- and 1,6-diols. The regioselectivity of the 1,4-/1,6-diol was efficiently regulated by the addition of water; the 1,6-diol was obtained selectively in dry THF, whereas the 1,4-diol was obtained predominantly in DMI containing a small amount of water.     

Concise synthesis of multiply substituted stereodefined cis,cis-2,4-diene-1,6-dials, cis,cis-2,4-diene-1,6-diols and further applications

Reactions of 1,4-dilithio-1,3-dienes with DMF afforded multiply substituted stereodefined cis,cis-2,4-diene-1,6-dials in high yields. Treatment of these 1,6-dials with LiAlH₄ or RLi resulted in the formation of their corresponding 1,6-diols. These bifunctional compounds, cis,cis-2,4-diene-1,6-dials and -1,6-diols are otherwise not readily available. Further reaction of these 1,6-diols with an aldehyde catalyzed by strong acids led to the formation of oxacycles of novel structures.     

Synthesis, structures, and luminescent properties of phenol-pyridyl boron complexes

Syntheses of the four mixed phenol-pyridine derivatives 1,6-bis(2-hydroxyphenyl)pyridyl boron naphthalene (1), 1,6-bis(2-hydroxy-5-methylphenyl)pyridyl boron naphthalene (2), 1,6-bis(2-hydroxyphenyl)pyridyl boron 2-methoxylbenzene (3), and 1,6-bis(2-hydroxy-5-methylphenyl)pyridyl boron 2-methoxylbenzene (4) are reported. The structures of the boron compounds 1, 3, and 4 were determined by single-crystal X-ray diffraction. The molecular packing is characterized by intermolecular pi...pi and hydrogen-bonding interactions. DSC analysis demonstrates that 1 and 2 have good thermal stability with higher glass transition temperatures (Tg) and melting points (Tm) than 3 and 4. Boron complexes 1-4 display bright blue luminescence in solution and the solid state. White and blue electroluminescent (EL) devices were fabricated successfully using these boron compounds.