Effects of BaCl_2 on slow vacuolar ion channels on radish by patch-clamp

Effects of BaCl2 on slow vacuolar ion channels on radish by patch-clamp YANG Pin (杨 频) & ZHANG Liping (张丽平) Institute of Molecular Science, Shanxi University, Taiyuan 030006, China Correspondence should be addressed to Yang Pin (email: yangpin@sxu.edu.cn)     

Heavy metal removal using SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> binary oxide: experimental design approach

Sorption of Ni²⁺ and Cd²⁺ as heavy metals ions at the interface of the binary oxide TiO₂-SiO₂ was investigated. In addition, physical properties of TiO₂-SiO₂ matrices such as BET surface area, X-ray diffraction, and point of zero charge (pH_PZC) were measured. Statistical design of experiments was applied to find the conditions of sorption at which the maximum heavy metal removal was achieved. A second order polynomial function was used to correlate the independent variables (pH, metal ion concentration, and shaking time) and response (heavy metal removal). Values of regression parameters were determined by the computer program, Design expert^® (Stat-Ease Inc.). The quality of fit of the polynomial model equation was expressed by the regression coefficient R ². The sorption results showed that the pH is the most significant factor. In turn, the sorbed percentage reached 100% at high initial concentration and long shaking times due to formation of hydroxyl compounds between the ions and TiO₂-SiO₂ matrices. The results show that there is a Gaussian (normal) distribution of residuals (squared differences between experimentally observed and predicted values from the model), and also that the differences between observed and predicted values are in the range of ±5%. These indicate that experiments were well-conducted and the results have no significant error.     

Effects of Cu2+ on characteristic of SV currents

Applying the patch-clamp technique to vacuoles from Radish we studied the effects of Cu²⁺ on Slow Vaculolar (SV) current’s characteristic. Our results show that Cu²⁺ in bath solution at higher concentration inhibits SV currents and the percentage of inhibition increases with increasing concentration and changes with different voltage. When at lower concentration, Cu²⁺ significantly promotes the SV currents and the promotion ratio decrease with increasing voltage. At the same time, the time constants of activation become lesser after adding Cu²⁺. These results show that there may be some Cu²⁺ binding sites on SV channels and binding to which can change SV current’s characteristic.     

A new phosphor with flower-like structure and luminescent properties of Sr<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>: Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> long afterglow materials by sol–gel method

The flower-like phosphors of Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ with high brightness and long afterglow were obtained by sol–gel method. X-ray diffraction pattern (XRD) shows that single-phased Sr₂MgSi₂O₇ phosphor is prepared by sol–gel method under 1250 °C. Scanning electron microscope (SEM) indicates that the phosphor consists of nano-sized whiskers which are detected for the first time in Eu²⁺ and Dy³⁺ co-doped long-lasting phosphorescence silicates. Furthermore, the investigation on the mechanism indicates that the internal structure and gas, liquid and solid phase effect play important roles in the formation of flower-like Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ nanostructure. Finally, the optical properties of flower-like Sr₂MgSi₂O₇ nanostructure have been characterized by photoluminescence (PL) spectra.     

Effects of La<Superscript>3+</Superscript> on inward K<Superscript>+</Superscript> channels at plasma membrane in guard cells

The effects of La³⁺ on inward K⁺ channels at plasma membrane in vicia guard cells are investigated using the whole-cell patch-clamp recording mode. It is shown that La³⁺ on both sides of plasma membrane blocks inward K⁺ currents in a concentration-dependent manner, indicating that La³⁺ binding sites may exist on both sides of plasma membrane in guard cells in vicia. The dose response is fitted by the Michaelis-Menten relation characterized by an inhibitor constant K _i of 2.56±0.25 μmol · L⁻¹ (outside membrane) and (1.18±0.11)×10⁻¹⁵ mol · L⁻¹ (inside membrane). Intracellular La³⁺ has much stronger inhibitory effect on inward K⁺ currents than extracellular La³⁺ does, suggesting there may exist stronger binding sites inside membrane than outside membrane. Since ion channel activities of guard cells directly affect plant stomatal movement and water status, our results imply that rare earth elements might have potential practical values in regulating plant water status and strengthening plant drought endurance.     

Two color up-conversion emissions of Er<Superscript>3+</Superscript>-doped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanopowders prepared by non-aqueous sol-gel method

Er³⁺-doped Al₂O₃ nanopowders have been prepared by the non-aqueous sol-gel method using the aluminum isopropoxide as precursor, acetylacetone as a chelating agent, nitric acid as a catalyzer, and hydrated erbium nitrate as a dopant under isopropanol environment. The different phase structure, including three crystalline types of (Al, Er)₂O₃ phases, α, γ, θ, and an Er–Al–O stoichiometric compound phase, Al₁₀Er₆O₂₄, was observed for the 0.01–0.5 mol% Er³⁺-doped Al₂O₃ nanopowders at the sintering temperature of 1,000 °C. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the ²H_11/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978 nm semiconductor laser diodes excitation. With increasing Er³⁺ doping concentration from 0.01 to 0.1 mol%, the intensity of the green and red emissions increased with a decrease of the intensity ratio of the green to red emission. When the Er³⁺ doping concentration rose to 5 mol%, the intensity of the green and red emissions decreased with an increase of their intensity ratio. The maximum intensity of both the green and red emissions with the minimum of intensity ratio was obtained, respectively, for the 0.1 mol% Er³⁺-doped Al₂O₃ nanopowders composed of a single α-(Al,Er)₂O₃ phase. The intensity ratio of the green emission at 523 and 545 nm increased monotonously for all Er³⁺ doping concentrations. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er³⁺-doped Al₂O₃ nanopowders.     

Crystal-chemical analysis of the structures of minerals with [Hg<Subscript>2</Subscript>]<Superscript>2+</Superscript> dumbbells

An analysis of the structures of minerals with [Hg₂]²⁺ dumbbells including poyarkovite [Hg₂]₃Cl₂O₂, shakhovite [Hg₂]₂Sb(OH)₃O₃, vasilyevite Hg₂₀O₆I₃Br₂Cl(CO₃), and kelyanite [Hg₂]₆[SbO₆]BrCl₂ was carried out. The determining factor in structure formation is the ordering of the centers of the cluster groups of mercury and large anions by systems of equidistant parallel planes with d _hkl ～ 2.5–4.5 Å. The different combinations of atoms and fragments in the structure are ordered by their own pseudotranslation lattices; this probably reflects the stages of crystallization. The crystal structures under study are examples of balance between the local interatomic interactions and the forces that create long-range order for different stoichiometries, masses, and sizes of components.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Development of a PVC-membrane ion-selective bulk optode,for UO<Stack><Subscript>2</Subscript><Superscript>2+</Superscript></Stack> ion,based on tri-<Emphasis Type="Italic">n</Emphasis>-octylphosphine oxide and dibenzoylmethane

A novel uranyl ion-selective bulk optode membrane, incorporating tri-n-octylphosphine oxide for cation recognition and a lipophilic chromoionophore dibenzoylmethane, has been prepared. The PVC membrane composition was optimized to result in the widest working concentration range. The response range of the proposed optode is 4.1×10^–6 to 2.0×10^–4 mol L^–1 UO₂²⁺. The probe works at pH 4.0. Ion interference is low and selectivity, reproducibility, and stability are good.     

X-ray photoelectron study of the interaction of H<Subscript>2</Subscript> and H<Subscript>2</Subscript>+O<Subscript>2</Subscript> mixtures on the Pt/MoO<Subscript>3</Subscript> model catalyst

The effects of H₂ and H₂ + O₂ gas mixtures of varying composition on the state of the surface of the Pt/MoO₃ model catalyst prepared by vacuum deposition of platinum on oxidized molybdenum foil were investigated by X-ray photoelectron spectroscopy (XPS) at room temperature and a pressure of 5–150 Torr. For samples with a large Pt/Mo ratio, the XP spectrum of large platinum particles showed that the effect of hydrogen-containing mixtures on the catalyst was accompanied by the reduction of molybdenum oxide. This effect results from the activation of molecular hydrogen due to the dissociation on platinum particles and subsequent spill-over of hydrogen atoms on the support. The effect was not observed at low platinum contents in the model catalyst (i.e., for small Pt particles). It is assumed for the catalyst that the loss of its hydrogen-activating ability is a consequence of the formation of platinum hydride. Possible participation of platinum hydride as intermediate in hydrogen oxidation to H₂O₂ is discussed.     

Facilitated Transport of C<Subscript>2</Subscript>H<Subscript>4</Subscript> in a SiO<Subscript>2</Subscript>-poly(N-vinylpyrrolidone)-Ag<Superscript>+</Superscript> Inorganic-Organic Hybrid Membrane

Inorganic-organic hybrid membranes containing silica as the structure matrix, poly(N-vinylpyrrolidone) (PVP) as the organic mediating agent and silver ions as olefinic carriers were prepared using sol–gel method and dip-coating process. The structure and permeances of the membranes for N₂, He, C₂H₄, C₂H₆ at different temperatures indicated that defect-free membranes were obtained and the transportation of the C₂H₄ through the membranes followed the dissolution and diffusion mechanism. Ideal separation factors of C₂H₄/C₂H₆ through the membranes were evaluated at the temperature of 298, 373 and 423 K respectively using mixture gas of 50% C₂H₄-50% C₂H₆. The results showed that the ideal separation factors of C₂H₄/C₂H₆ through the membranes were obviously greater than the ratio of PC₂H₄/PC₂H₆ obtained from the single gas measurement due to the hindering effect by the adsorbed C₂H₄. The ideal separation factors of C₂H₄/C₂H₆ increased with temperature and reached 10 at 423 K, which suggested that C₂H₄ and C₂H₆ could be separated at lower humidity compared to the reported organic polymer/silver salt membranes in which humidified gases and higher silver loading were usually used. The transport of C₂H₄ in the inorganic-organic hybrid membrane was proposed to follow the hopping mechanism, that is, olefins moved across the fixed silver sites.     

Modeling the active centers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> and V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> supported catalysts. DFT theoretical analysis of optical properties

Within the framework of the density functional theory (DFT), the electronic structure of monooxodioxovanadium functional groups in tetrahedral coordination, which model the active centers (ACs) of fine supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂, has been analyzed. The optimal structures of three ACs as possible models of monomeric and polymeric oxovanadium forms on the carriers with low vanadium content were determined. The modified DFT method involving the time dependence of Kohn-Sham equation (TDDFT) was used for the adopted AC models to calculate the energies of the excited states, and optical spectra of the absorption in 25000–60000 cm^?1 region were reconstructed on their base. The spectrum in this region is due to O → V charge transfer. The features of electronic spectra with the charge transfer for V₂O₅/SiO₂ and V₂O₅/TiO₂ catalysts and the vibrational spectra of three AC models corresponding to the monomeric and dimeric oxovanadium forms of the supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂ were defined. The detailed interpretation of normal vibration frequencies is given. The frequencies typical of the monomeric and dimeric oxovanadium forms on the carrier surface were identified.     

Ionic mobility in ammonium-rubidium heptafluorozirconate (NH<Subscript>4</Subscript>)<Subscript>2.4</Subscript>Rb<Subscript>0.6</Subscript>ZrF<Subscript>7</Subscript> by (<Superscript>1</Superscript>H, <Superscript>19</Superscript>F) NMR data

NMR (¹⁹F, ¹H) methods are used to study ionic mobility in heptafluorozirconate (NH₄)_2.4Rb_0.6ZrF₇ in a range of temperatures from 150 K to 430 K. Types of ionic movements are determined, and their activation energy is evaluated. As a result of a phase transition a modification forms in which diffusion in the ammonium sublattice and isotropic reorientations of ZrF ₇ ^3? complex anions are observed. According to preliminary data, due to diffusion of ammonium ions the compound has relatively high ionic conductivity (σ ≈ 8.3 × 10^?5 S/cm at 423 K).     

Synthesis,structure, and NO-donor activity of the paramagnetic complex [Fe<Subscript>2</Subscript>(SC<Subscript>3</Subscript>H<Subscript>5</Subscript>N<Subscript>2</Subscript>)<Subscript>2</Subscript>(NO)<Subscript>4</Subscript>] as a model of nitrosyl [2FE-2S] proteins

The neutral dinuclear iron nitrosyl complex [Fe₂(SC₃H₅N₂)₂(NO)₄] (1) of the “g = 2.03” family with a ligand analogous to natural mercaptohistidine was synthesized by the metathesis reaction of the thiosulfate ligands in the [Fe₂(S₂O₃)₂(NO)₄]²⁻ anion with imidazolidine-2-thiolate ligands. The electrochemical determination of nitrogen oxide in solution showed that compound 1 has a lower NO-donor ability compared to the iron complexes with 1-methylimidazole-2-thiol and imidazole-2-thiol synthesized earlier. Study of the magnetic properties of polycrystals of 1 demonstrated that the effective magnetic moment at room temperature is ca. 2.45 μ_B and corresponds to a molecule containing a pair of the noninteracting spins S = 1/2. This is evidence that each iron coordination unit in complex 1 contains one unpaired electron, and the iron atom is in the low-spin state. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 28–34, January, 2007.     

Theoretical study of the mechanism for C-H bond activation in spin-forbidden reaction between Ti<Superscript>+</Superscript> and C<Subscript>2</Subscript>H<Subscript>4</Subscript>

The mechanism of the spin-forbidden reaction Ti⁺(⁴F, 3d²4s¹) + C₂H₄→TiC₂H₂ ⁺ (²A₂) + H₂ on both doublet and quartet potential energy surfaces has been investigated at the B3LYP level of theory. Crossing points between the potential energy surfaces and the possible spin inversion process are discussed by means of spin-orbit coupling (SOC) calculations. The strength of the SOC between the low-lying quartet state and the doublet state is 59.3 cm⁻¹ in the intermediate complex IM1-⁴B₂. Thus, the changes of its spin multiplicity may occur from the quartet to the doublet surface to form IM1-²A₁, leading to a sig-nificant decrease in the barrier height on the quartet PES. After the insertion intermediate IM2, two distinct reaction paths on the doublet PES have been found, i.e., a stepwise path and a concerted path. The latter is found to be the lowest energy path on the doublet PES to exothermic TiC₂H₂ ⁺(²A₂) + H₂ products, with the active barrier of 4.52 kcal/mol. In other words, this reaction proceeds in the following way: Ti⁺+C₂H₄→⁴IC→IM1-⁴B₂→^4,2ISC→IM1-²A₁→[²TS_ins]→IM2→[²TS_MCTS]→IM5→TiC₂H₂ ⁺(²A₂)+H₂. Supported by ‘Qinglan’ Talent Engineering Funds by Tianshui Normal University.     

Effect of PEG with different <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> as template direction reagent on preparation of porous TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> with assistance of supercritical CO<Subscript>2</Subscript>

Titania–silica composite have been prepared using polyethylene glycol (PEG) with different molecular weights (M _w), PEG20000, PEG10000, and PEG2000, as template in supercritical carbon dioxide (SC CO₂). The composite precursors were dissolved in SC CO₂ and impregnated into PEG templates using SC CO₂ as swelling agent and carrier. After removing the template by calcination at suitable temperature, the titania–silica composite were obtained. The composite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and nitrogen sorption–desorption experiment. Photocatalytic activity of the samples has been investigated by photodegradation of methyl orange. Results indicate that there are many Si–O–Ti linkages in the TiO₂/SiO₂ composite; the PEG template has a significant influence on the structure of TiO₂/SiO₂. In addition, the TiO₂/SiO₂ prepared with PEG10000 exhibited high photocatalytic efficiency. So this work supplies a clue to control and obtain the TiO₂/SiO₂ composite with different photocatalytic reactivity with the aid of suitable PEG template in supercritical CO₂.     

LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> and LiCoO<Subscript>2</Subscript> composite cathode materials obtained by mechanical activation

New composite cathode materials xLiMn₂O₄/(1 ? x) LiCoO₂(x = 0.7, 0.6, 0.5 и 0.4) were obtained by mechanical activation. According to scanning electron microscopy data, the process was accompanied by pronounced dispersion and fine mixing of the initial components. In the course of the preparation and electrochemical cycling of the composites, LiMn₂O₄ and LiCoO₂ partially reacted, leading to the replacement of manganese with cobalt in the structure of spinel, which was detected by powder X-ray diffraction (XRD), IR and X-ray photoelectron spectroscopy (XPS), and cyclic chronopotentiometry. The specific discharge capacity of composites was ～100 mAh/g.     

Photocatalytic reduction of CO<Subscript>2</Subscript> over TiO<Subscript>2</Subscript> based catalysts

At present, carbon dioxide is considered the largest contributor among greenhouse gases. This review covers the current state of problem of carbon dioxide emissions from industrial and combustion processes, the principle of photocatalysis, existing literature related to photocatalytic CO₂ reduction over TiO₂ based catalysts and the effects of important parameters on the process performance including light wavelength and intensity, type of reductant, metal-modified surface, temperature and pressure. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Preparation of novel visible-light-driven In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaIn<Subscript>2</Subscript>O<Subscript>4</Subscript> composite photocatalyst by sol–gel method

Novel visible-light-activated In₂O₃–CaIn₂O₄ photocatalysts were developed in this paper through a sol–gel method. The photocatalytic activities of In₂O₃–CaIn₂O₄ composite photocatalysts were investigated based on the decomposition of methyl orange under visible light irradiation (λ > 400 nm). The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and UV–vis diffused reflectance spectroscopy (DRS). The results revealed that the In₂O₃–CaIn₂O₄ composite samples with different In₂O₃ and CaIn₂O₄ content can be obtained by controlling the synthesis temperature, and the composite photocatalysts extended the light absorption spectrum toward the visible region. The photocatalytic tests indicated that the composite samples demonstrated high visible-light activity for decomposition of methyl orange. The significant enhancement in the In₂O₃–CaIn₂O₄ photo-activity under visible light irradiation can be ascribed to the efficient separation of photo-generated carriers in the In₂O₃ and CaIn₂O₄ coupling semiconductors.