Broadband optical limiting in the suspensions of lead sulfide nanoparticles

Nanoparticles of lead sulfide (PbS) have been prepared by a surfactant micelle template-inducing reaction. These nanoparticles were dispersed in ethanol and investigated for their nonlinear optical properties by nanosecond laser pulses. Broadband optical limiting effects have been observed at the wavelengths of 355, 1064, and 430 nm and every 30 nm from 470 to 620 nm. The nonlinear light-scattering process in the suspensions of PbS nanoparticles was characterized at the wavelength of 532 nm. Nonlinear absorption and nonlinear scattering were deduced to be the mechanisms for the broadband optical limiting performance. The origins of the nonlinear scattering were discussed.     

碳纳米粒子悬浮液光限幅性能数值模拟

碳纳米粒子悬浮液具有良好的光限幅性质,是一种优良的宽波段光限幅材料。通过热传导方程和米氏散射理论建立了微气泡半径与入射光能量、碳纳米粒子悬浮液散射系数和透过率的理论模型。采用Matlab数值模拟了散射系数随微气泡尺寸因子的变化关系,碳纳米粒子悬浮液光限幅性能随入射光能量的变化规律。研究了气泡尺寸因子、入射激光能量以及波长对碳纳米粒子悬浮液光限幅特性的影响。研究发现当激光能量达到一定值时,微气泡的半径保持恒定,不再随入射激光能量的增加而增加。微气泡尺寸的增大对碳纳米粒子悬浮液的透过率有着显著的影响。同时,碳纳米粒子悬浮液对不同入射光波长和光能表现出不同的光限幅性能。研究结果为实验研究提供了理论指导。     

Synthesis and characterization of a polyaniline-modified SnO<Subscript>2</Subscript> nanocomposite

Polyaniline-modified tin oxide and tin oxide nanoparticles were synthesized using a solution route technique. The obtained pristine products were characterized with X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and optical absorption spectroscopy. Thermogravimetric analysis results showed that the polyaniline-modified SnO₂ nanoparticles exhibit higher thermal stability than the SnO₂ nanoparticles. Scanning electron microscopy analysis on the as-synthesized powders showed spherical particle in the range of 50–100 nm.     

Surface Modification of Magnetic Nanoparticles Using Gum Arabic

Magnetite nanoparticles were synthesized and functionalized by coating the particle surfaces with gum arabic (GA) to improve particle stability in aqueous suspensions (i.e. biological media). Particle characterization was performed using transmission electron microscopy (TEM) and dynamic light scattering (DLS) to analyze the morphology and quantify the size distribution of the nanoparticles, respectively. The results from DLS indicated that the GA-treated nanoparticles formed smaller agglomerates as compared to the untreated samples over a 30-h time frame. Thermogravimetric analyses indicated an average weight loss of 23%, showing that GA has a strong affinity toward the iron oxide surface. GA most likely contributes to␣colloid stability via steric stabilization. It was determined that the adsorption of GA onto magnetite exhibits Langmuir behavior.     

Microemulsion synthesis, characterization of bismuth oxyiodine/titanium dioxide hybrid nanoparticles with outstanding photocatalytic performance under visible light irradiation

Reverse microemulsions, consisting of n-hexanol, Triton X-100, Cyclohexane and aqueous salt solutions, were used to synthesize BiOI, TiO₂ and BiOI/TiO₂ hybrid nanoparticles at room temperature. The particles had been characterized by X-ray powder diffraction, FT-IR spectra, TG-DSC analysis, nitrogen sorption, electron microscopy, and UV-vis diffuse reflectance spectroscopy. The photocatalytic properties of those particles were evaluated by degradation of methyl orange under visible light irradiation. The BiOI/TiO₂ composites showed about 5 times higher photocatalytic performances than BiOI when the mole ratio of BiOI to TiO₂ was 75%. The remarkable enhancement in the visible light photocatalytic activities of the BiOI/TiO₂ heterostructures could be first attributed to the effective electron-hole separations at the interfaces of the two semiconductors, which facilitated the transfer of the photoinduced carriers. Meanwhile, the heterojunction formed between BiOI and TiO₂ would further retard the recombination of photoinduced carriers. In addition, high degree of crystallization, bimodal porous structure, relative large specific surface area, and appropriate energy band gap have great contribution to the enhancement of photocatalytic performance.     

Controlled surface functionalization of silica-coated magnetic nanoparticles with terminal amino and carboxyl groups

General and versatile methods for the functionalization of superparamagnetic, silica-coated, maghemite nanoparticles by surface amino and/or carboxyl groups have been established. The nanoparticles were synthesized using co-precipitation from aqueous solutions and coated with a thin layer of silica using the hydrolysis and condensation of tetraethoxysilane (TEOS). For the amino functionalization, 3-(2-aminoethylamino)propylmethyldimethoxysilane (APMS) was grafted onto the nanoparticle surfaces in their aqueous suspensions. The grafting process was followed by measurements of the ζ-potential and a determination of the concentration of the surface amino groups with conductometric titrations. The surface concentration of the amino groups could be varied by increasing the amount of APMS in the grafting process up to approximately 2.3 –NH₂ groups per nm². The carboxyl functionalization was obtained in two ways: (i) by a ring-opening linker elongation reaction of the surface amines at the functionalized nanoparticles with succinic anhydride (SA) in non-aqueous medium, and (ii) by reacting the APMS and SA first, followed by grafting of the carboxyl-terminated reagent onto the nanoparticle surfaces. Using the first method, the SA only reacted with the terminal primary amino groups (–NH₂) of the surface-grafted APMS molecules. Infra-red spectroscopy (ATR FTIR) and mass spectrometry (HRMS) showed that the second method enables the bonding of up to two SA molecules per one APMS molecule, since the SA reacted with both the primary (–NH₂) and secondary amino (–NH–) groups of the APMS molecule. When using both methods, the ratio between the surface amino and carboxyl groups can be controlled.     

Enhanced optical limiting properties in suspensions of CdO nanowires

Optical limiting (OL) properties of CdO nanowires in water and ethanol were investigated by using nanosecond laser pulses at 532 nm. Experimental results show that suspension of CdO nanowires in ethanol exhibits better OL property than solution of C₆₀ in toluene and suspension of CdO nanowires in water. The dominant mechanism for the observed enhanced optical limiting in ethanol suspensions of CdO nanowires is due to nonlinear scattering.     

Characterizing the dynamic behavior of nano-TiO<Subscript>2</Subscript> agglomerates in suspensions by photocorrelation spectroscopy

Metal oxide nanoparticles are small but easily form agglomerates in suspension, depending on the strength of particle–particle and particle–media interactions. To understand the agglomeration behavior of nanoparticles in media and relate to it to product performance testing, measurement methods are desired to characterize highly scattering metal oxide nanoparticle suspensions without dilution. In this article, we describe the advantages of using photocorrelation spectroscopy (PCS) in a backscattering detection configuration to carry out a realistic agglomerate size measurement in multiple scattering media found in most metal oxide nanoparticle suspensions. The dynamic behavior of nano-titanium dioxide (TiO₂) particles in buffer solutions of different chemical composition and pH values was investigated as a sample system using PCS. The resulting autocorrelation functions (AFs) at different time intervals, particle concentrations, and pH values were measured at several detection angles. The AF exhibits a multi-mode relaxation time feature and the calculated hydrodynamic diameters strongly depended on media composition and detection angle. This result indicates that the size and dispersion of nano-TiO₂ agglomerates are significantly affected by solution media. A measurement protocol for determining size and dispersion of metal oxide particles in media is proposed and related to a performance test found in industry.     

Silica-coated manganite and Mn-based ferrite nanoparticles: a comparative study focused on cytotoxicity

Magnetic oxide nanoparticles provide a fascinating tool for biological research and medicine, serving as contrast agents, magnetic carriers, and core materials of theranostic systems. Although the applications rely mostly on iron oxides, more complex oxides such as perovskite manganites may provide a much better magnetic performance. To assess the risk of their potential use, in vitro toxicity of manganite nanoparticles was thoroughly analysed and compared with another prospective system of Mn–Zn ferrite nanoparticles. Magnetic nanoparticles of La_0.63Sr_0.37MnO₃ manganite were prepared by two distinct methods, namely the molten salt synthesis and the traditional sol–gel route, whereas nanoparticles of Mn_0.61Zn_0.42Fe_1.97O₄ ferrite, selected as a comparative material, were synthesized by a new procedure under hydrothermal conditions. Magnetic cores were coated with silica and, moreover, several samples of manganite nanoparticles with different thicknesses of silica shell were prepared. The size-fractionated and purified products were analysed using transmission electron microscopy, dynamic light scattering, measurement of the zeta-potential dependence on pH, IR spectroscopy, and SQUID magnetometry. The silica-coated products with accurately determined concentration by atomic absorption spectroscopy were subjected to a robust evaluation of their cytotoxicity by four different methods, including detailed analysis of the concentration dependence of toxicity, analysis of apoptosis, and experiments on three different cell lines. The results, comparing two manganese-containing systems, clearly indicated superior properties of the Mn–Zn ferrite, whose silica-coated nanoparticles show very limited toxic effects and thus constitute a promising material for bioapplications.     

Influence of synthesis method on structural and magnetic properties of cobalt ferrite nanoparticles

The Co–ferrite nanoparticles having a relatively uniform size distribution around 8 nm were synthesized by three different methods. A simple co-precipitation from aqueous solutions and a co-precipitation in an environment of microemulsions are low temperature methods (50 °C), whereas a thermal decomposition of organo-metallic complexes was performed at elevated temperature of 290 °C. The X-ray diffractometry (XRD) showed spinel structure, and the high-resolution transmission electron microscopy (HRTEM) a good crystallinity of all the nanoparticles. Energy-dispersive X-ray spectroscopy (EDS) showed the composition close to stoichiometric (~CoFe₂O₄) for both co-precipitated nanoparticles, whereas the nanoparticles prepared by the thermal decomposition were Co-deficient (~Co_0.6Fe_2.4O₄). The X-ray absorption near-edge structure (XANES) analysis showed Co valence of 2+ in all the samples, Fe valence 3+ in both co-precipitated samples, but average Fe valence of 2.7+ in the sample synthesized by thermal decomposition. The variations in cation distribution within the spinel lattice were observed by structural refinement of X-ray absorption fine structure (EXAFS). Like the bulk CoFe₂O₄, the nanoparticles synthesized at elevated temperature using thermal decomposition displayed inverse spinel structure with the Co ions occupying predominantly octahedral lattice sites, whereas co-precipitated samples showed considerable proportion of cobalt ions occupying tetrahedral sites (nearly 1/3 for the nanoparticles synthesized by co-precipitation from aqueous solutions and almost 1/4 for the nanoparticles synthesized in microemulsions). Magnetic measurements performed at room temperature and at 10 K were in good agreement with the nanoparticles’ composition and the cation distribution in their structure. The presented study clearly shows that the distribution of the cations within the spinel lattice of the ferrite nanoparticles, and consequently their magnetic properties are strongly affected by the synthesis method used.     

Particle size dependence of relaxivity for silica-coated iron oxide nanoparticles

We investigate the particle size dependence of the relaxivity of hydrogen protons in an aqueous solution of iron oxide (Fe₃O₄) nanoparticles coated in silica for biocompatibility. The T₁ and T₂ relaxation times for various concentrations of silica-coated nanoparticles were determined by a magnetic resonance scanner. We find that the relaxivity increased linearly with increasing particle size. The T₂ relaxivity (R₂) is more than 50 times larger than the T₁ relaxivity (R₁) for the nanoparticle contrast agent, which reflects the fact that the T₂ relaxation is mainly influenced by outer sphere processes. The high R₂/R₁ ratio demonstrates that silica-coated iron oxide nanoparticles may serve as a T₂ contrast agents in magnetic resonance imaging with high efficacy.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Step-addition Method for Enhancing the Yield of Gold Nanoparticles in Block Copolymer Solution

Triblock copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) has been used to synthesize gold nanoparticles from hydrogen tetrachloroaureate (III) hydrate (HAuCl₄·3H₂O) salt in aqueous solution at room temperature. Measurements were performed using the triblock copolymer Pluronic P85 (EO₂₆PO₃₉EO₂₆) at a fixed concentration (1 wt%) mixed with varying HAuCl₄·3H₂O concentration in the range of 0.001 to 0.1 wt%. The surface plasmon resonance (SPR) band in UV-visible absorption spectra confirmed the formation of the gold nanoparticles. The maximum yield of the nanoparticles was found at 0.005 wt% of the salt solution. Small-angle neutron scattering (SANS) does not show any significant change in the scattering profile in these suspensions of the nanoparticles. A similar behavior was also observed in dynamic light scattering (DLS) experiments where autocorrelation function was found to be independent of the salt concentration. This can be understood since a high-block copolymer-to-gold ion ratio (r ～ 22) is required in the reduction reaction to produce gold particles. As a result, a very small fraction of the block copolymers were associated with the gold nanoparticles, and hence lead to a very low yield. Both SANS and DLS basically see the micelles of most of these block copolymers, which are not associated with nanoparticles. Based on this explanation, a step-addition method was used to enhance the yield of gold nanoparticles by manifold, where the gold salt is added in small steps to maintain higher value of r (>22), and therefore continuous formation of nanoparticles.     

Laser light scattering in micellar solutions

Summary The laser light scattering apparatus used for both total intensity and quasi-elastic light scattering experiments on micellar solutions is described in detail. The absolute calibration of the scattered intensity is obtained by exploiting the existence of a lower critical consolution point in a low-concentration aqueous solution of a nonionic amphiphile (C₁₂E₈). The obtained results suggest that micellar solutions may represent a very convenient light scattering standard for both static and dynamic experiments. Paper presented at the “Meeting on Lyotropics and Related Fields”, held in Rende, Cosenza, September 13—18, 1982.     

Preparation of composite with silica-coated nanoparticles of iron oxide spinels for applications based on magnetically induced hyperthermia

It is reported a novel method to prepare magnetic core (iron oxide spinels)–shell (silica) composites containing well-dispersed magnetic nanoparticles in aqueous solution. The synthetic process consists of two steps. In a first step, iron oxide nanoparticles obtained through co-precipitation are dispersed in an aqueous solution containing tetramethylammonium hydroxide; in a second step, particles of this sample are coated with silica, through hydrolyzation of tetraethyl orthosilicate. The intrinsic atomic structure and essential properties of the core–shell system were assessed with powder X-ray diffraction, Fourier transform infrared spectrometry, Mössbauer spectroscopy and transmission electron microscopy. The heat released by this ferrofluid under an AC-generated magnetic field was evaluated by following the temperature evolution under increasing magnetic field strengths. Results strongly indicate that this ferrofluid based on silica-coated iron oxide spinels is technologically a very promising material to be used in medical practices, in oncology.     

Orientational averaging of integrated cross sections in the discrete dipole method

Using the discrete dipole method, exact and approximate analytical solutions for orientation-averaged cross sections for extinction, absorption, and scattering of light are obtained. The analytical solutions can be applied to the calculation of integrated cross sections of fractal clusters formed by primary particles with different optical properties (soot in air and aqueous suspensions of aggregates of polystyrene, gold, and silver nanoparticles). It is shown that two models of aggregates that differ only in trajectories (ballistic or Brownian) of primary particles and intermediate clusters and in average fractal dimensions give close values of averaged extinction cross sections.     

Photoinduced optical activity of C<Subscript>70</Subscript> fullerene in organic solvents

We have experimentally studied for the first time the effect of photoinduced rotation of the plane of polarization for pulsed laser radiation in solutions of C₇₀ fullerene in organic solvents and their mixtures. We have shown that the effect is observed for elliptical polarization of the laser radiation and is absent for linear polarization. We present the results of a study of the nonlinear optical characteristics of the C₇₀ solutions. We discuss the physical mechanisms by which nonlinear gyrotropy is induced in solutions. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 1, pp. 93–99, January–February, 2009.     

Nonlinear optical absorption and refraction in Ru, Pd, and Au nanoparticle suspensions

We present the results of studies of the nonlinear optical properties of Pd, Ru, and Au nanoparticles. We studied the nonlinear refraction and nonlinear absorption of suspensions of these nanoparticles at 1064-nm wavelength. A relatively strong nonlinear absorption of the Pd nanoparticles was observed in the case of 1064-nm, 50-ps pulses (β=2×10⁻⁹ m W⁻¹). The Ru and Pd nanoparticles showed weak negative nonlinear refraction (γ∼−(6–8)×10⁻¹⁶ m² W⁻¹) in this spectral range. In the case of the Au nanoparticles, a saturated absorption at 532 nm dominated over other nonlinear optical processes.     

Microwave-assisted synthesis and characterization of Bi-substituted yttrium garnet nanoparticles

Bi-substituted yttrium iron garnet (Bi-YIG, Bi_1.8Y_1.2Fe₅O₁₂) nanoparticles were prepared by microwave-assisted co-precipitation as well as conventional co-precipitation using ammonia aqueous solution as precipitant. The nanoparticles were characterized by thermal gravity-differential thermal analysis, X-ray powder diffraction, transmission electron microscopy, dynamic light scattering and vibrating sample magnetometer, respectively. The Faraday rotation of Bi-YIG modified PMMA slices was also investigated. Results demonstrate that the Bi-YIG nanoparticles prepared by microwave-assisted co-precipitation show smaller particle size and higher Faraday rotation than those prepared by conventional co-precipitation.     

Theoretical investigation of nonlinear limiting of laser radiation power by suspensions of carbon particles

The effect of nonlinear limiting of laser radiation power by aqueous suspensions of carbon particles is analyzed by solving the equations of heat conduction, hydrodynamics, and phase transition dynamics self-consistently with the problem of light scattering, absorption, and passage through an extended medium. The results of computer simulation and experiments are compared.