Charge-driven flocculation of poly(L-lysine)-gold nanoparticle assemblies leading to hollow microspheres

An unusual aggregation phenomenon that involves positively charged poly(L-lysine) (PLL) and negatively charged gold nanoparticles (Au NPs) is reported. Discrete, submicrometer-sized spherical aggregates are found to form immediately upon combining a PLL solution with gold sol (diameter approximately 14 nm). These PLL-Au NP assemblies grow in size with time, according to light scattering experiments, which indicates a dynamic flocculation process. Water-filled, silica hollow microspheres (outer diameter approximately microns) are obtained upon the addition of negatively charged SiO2 NPs (diameter approximately 13 nm) to a suspension of the PLL-Au NP assemblies, around which the SiO2 NPs form a shell. Structural analysis through confocal microscopy indicates the PLL (tagged with a fluorescent dye) is located in the interior of the hollow sphere, and mostly within the silica shell wall. The hollow spheres are theorized to form through flocculation, in which the charge-driven aggregation of Au NPs by PLL provides the critical first step in the two-step synthesis process ("flocculation assembly"). The SiO2 shell can be removed and re-formed by decreasing and increasing the suspension pH about the point-of-zero charge of SiO2, respectively.     

Homogeneous, competitive fluorescence quenching immunoassay based on gold nanoparticle/polyelectrolyte coated latex particles

This study reports a homogeneous and competitive fluorescence quenching immunoassay based on gold nanoparticle/polyelectrolyte (Au(NP)/PE) coated latex particles prepared by the layer-by-layer (LbL) technique. First, the resonant energy transfer from a layer of fluorescent PEs to Au(NP) in LbL assembled films on planar substrates was investigated. The quenching efficiency (QE) for the planar films depended on the cube of the distance between the two layers. A QE of 50% was achieved at a distance of ca. 15 nm, indicating that the Au(NP)/PE system is suitable for detecting binding/release events for antibodies. A homogeneous, competitive binding immunoassay for biotin was designed based on Au(NP)/PE-coated polystyrene particles of 488 nm diameter as quenching agents for a fluorescein isothiocyanate labeled anti-biotin immunoglobulin (FITC-anti-biotin IgG). Biotin molecules were localized on the Au(NP)/PE-coated latexes by depositing a layer of biotinylated poly(allylamine hydrochloride) (B-PAH), and FITC-anti-biotin IgGs were subsequently bound to the particles through interaction with the biotin on B-PAH. Transmission electron microscopy and quartz crystal microgravimetry confirmed the multilayer formation on latex particles and planar gold surfaces, respectively. The biotin-functionalized Au(NP)/PE-coated latexes terminated by FITC-anti-biotin IgG exhibited a dynamic sensing range of 1-50 nmol. These results indicate that Au(NP)/PE-coated latexes can be readily used as dynamic range tunable sensors.     

A molecular dynamics study of the physical basis of stability of polypeptide multilayer nanofilms

Electrostatic layer-by-layer assembly (LBL) is a versatile method of fabricating ultrathin multilayer films, coatings, and microcapsules from materials in solution, notably, oppositely charged polyelectrolytes in water. Polypeptides, a special type of polyelectrolyte, have recently shown promise for a range of applications in biotechnology and medicine, for example, artificial cells, drug delivery systems, cell/tissue scaffolds, artificial viruses, and implantable device coatings. Poly(L-lysine) (PLL) and poly(L-glutamic acid) (PLGA) at neutral pH are model oppositely charged polypeptides. Experimental studies have shown that PLL/PLGA multilayer films contain a substantial amount of beta-sheets. Here, we present findings of a molecular dynamics (MD) study of the physical basis of interaction between PLL and PLGA in multilayer film models. Simulations have been carried out to study structural and dynamical properties of PLL/PLGA aggregates in beta-sheet conformation. The results suggest that hydrophobic interactions, in addition to electrostatics interactions, play a significant role in PLL/PLGA multilayers. The preferred orientation of peptides in the beta-sheet structures is antiparallel within sheets and parallel between sheets. Intersheet hydrogen-bond formation is more likely the result of peptide association than the cause. The approach provides a general means to understand better how various types of noncovalent interactions contribute to the structure and stability of polypeptide multilayer films.     

Immobilization of enamel matrix derivate protein onto polypeptide multilayers. Comparative in situ measurements using ellipsometry, quartz crystal microbalance with dissipation, and dual-polarization interferometry

The buildup of biodegradable poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) multilayers on silica and titanium surfaces and the immobilization of enamel matrix derivate (EMD) protein was followed by utilizing in situ ellipsometry, quartz crystal microbalance with dissipation, and dual-polarization interferometry (DPI). The use of the relatively new DPI technique validated earlier published ellipsometry measurements of the PLL-PGA polypeptide films. The hydrophobic aggregating EMD protein was successfully immobilized both on top of and within the multilayer structures at pH 5.0. DPI measurements further indicated that the immobilization of EMD is influenced by the flow pattern during adsorption. The formed polypeptide-EMD multilayer films are of interest since it is known that EMD is able to trigger cell response and induce biomineralization. The multilayer films thus have potential to be useful as bioactive and biodegradable coatings for future dental implants.     

Influence of the foundation layer on the layer-by-layer assembly of poly-L-lysine and poly(styrenesulfonate) and its usage in the fabrication of 3D microscale features

The layer-by-layer (LBL) assembly of a polypeptide, poly-L-lysine (PLL), with poly(styrenesulfonate) sodium salt (PSS) on flat template-stripped gold (TSG) surfaces precoated with a self-assembled monolayer of alkanethiols terminated with positive (pyridinium), negative (carboxylic acid), and neutral [hexa(ethylene glycol)] groups is investigated. Both the topography and the rate of film thickness growth are found to be strongly dependent on the initial surface foundation layer. LBL assembly of PLL and PSS on patterned TSG surfaces produced by micro contact printing leads to structurally distinct microscale features, including pillars, ridges, and wells, whose height can be controlled with nanometer precision.     

Mineralization and osteoblast behavior of multilayered films on TiO2 nanotube surfaces assembled by the layer-by-layer technique

In this paper, the multilayer films of poly-L-lysine (PLL) and DNA were created on TiO₂ nanotube surfaces using the layer-by-layer (LBL) self-assembly technique. Chemical compositions of the assembled multilayered films were investigated by X-ray photoelectron spectroscopy. Biological properties of the multilayered films were evaluated by the biomimetic mineralization and osteoblast cell culture experiments. The results indicated that PLL and DNA were successfully assembled onto TiO₂ nanotube surfaces by electrostatic attraction. Moreover, the samples of assembled PLL or/and DNA had better bioactivity in inducing HA formation and promoting osteoblast cells adhesion, proliferation and early differentiation.     

Buildup of gold nanoparticle multilayer thin films based on the covalent-bonding interaction between boronic acids and polyols

A novel method for the fabrication of gold nanoparticle multilayer films based on the covalent-bonding interaction between boronic acid and polyols, poly(vinyl alcohol) (PVA), was developed. The multilayer buildup was monitored by UV-vis absorbance spectroscopy, which showed a linear increase of the film absorbance with the number of adsorbed Au layers and indicated the stepwise and uniform assembling process. The atomic force microscopy (AFM) image showed that a compact gold multilayer thin film was successfully assembled. The residual boronic acid group on the surface of thin film could incorporate glycosylated-protein horseradish peroxidase (HRP), and good catalytic activity for H2O2 could be observed.     

Radiation induced preparation of new multifunctional nanobiowebs

New poly(vinylidene fluoride) based multi-functional (electroconductive, bioactive and catalytic) nano-biowebs were prepared through gamma radiation induced formation of silica and gold nanoparticles (Au NPs) within electrospun (poly vinylidene fluoride) nanofiberous membranes. The multifunctional membrane is designated as PVdF@silica/Au ESNFM. The morphology of PVdF@silica/Au ESNFM was examined by field emission scanning electron microscopy. The presence of Au particles was confirmed by energy dispersive x-ray analysis. The crystal structure of Au particles and the formation of silica were confirmed by X-ray diffraction analysis. The multi-functionalities (electroconductive, bioactive and catalytic) of the nano-webs were evaluated by cyclic voltammetry. Cytochrome c was immobilized to generate nano-bioweb (PVdF@silica/Au/cyt c ESNFM), which exhibited electrochemical responses to nitrite ions.     

Silver nanocomposite layer-by-layer films based on assembled polyelectrolyte/dendrimer

Silver nanocomposite multilayer films were prepared through the in situ method. Multilayer thin films, prepared through the sequential electrostatic deposition of a positively charged third-generation poly(amidoamine) dendrimer (PAMAM) and negatively charged poly(styrenesulfonate) (PSS) and poly(acrylic acid) (PAA), were utilized as nanoreactors for the formation of silver nanoparticles. The silver ions were preorganized in layer-by-layer (LBL) films composed of PAMAM dendrimers and subsequently reduced with hydrogen to prepare the silver nanoparticles. The UV-vis spectrum and profilometer were used to characterize the regular growth of bilayers. UV-vis absorption from plasmon resonance at 435 nm and TEM images indicated the formation of the silver nanoparticles in the multilayer films. The silver nanocomposite LBL films were also constructed on the indium tin oxide-glass and investigated using cyclic voltammetry. The silver nanoparticles in the multilayer films have a stronger negative redox potential. The silver nanocomposite LBL films may have a potential application in the catalysis of reduction of 4-nitrophenol with sodium borohydride.     

Effect of composition on the conductivity and morphology of poly(3-hexylthiophene)/gold nanoparticle composite Langmuir-Schaeffer films

Ultrathin Langmuir-Schaeffer (LS) films were fabricated from blends of regioregular poly(3-hexylthiophene) (P3HT) and highly monodispersed dodecanethiolate-capped gold nanoparticles (Au NPs) mixed in varying weight ratios. The morphology of the ultrathin films was investigated by UV-visible absorption spectroscopy, atomic force microscopy (AFM) and field-emission scanning electron microscopy (FE-SEM). The results of the structural investigations were correlated with the lateral conductivity of the films, with P3HT in its unintentionally doped state, probed by scanning electrochemical microscopy (SECM), which proved to be a very sensitive technique. Control over the P3HT/Au NP ratio led to remarkable changes in the morphology and lateral conductivity of the films. Inclusion of Au NPs into P3HT was found to influence the ordering of P3HT, which ultimately determined the macroscopic charge transport characteristics of the films. Composite films with ca. 33% by weight of Au NPs were found to be the most ordered and exhibited the highest conductivity, substantially higher than P3HT alone. To provide insight into the film formation process, LS composite films comprising equal quantities of P3HT and Au NPs (by weight) were transferred at several surface pressures and investigated by SECM, AFM and FE-SEM.     

Partial poly(glutamic acid) <--> poly(aspartic acid) exchange in layer-by-layer polyelectrolyte films. Structural alterations in the three-component architectures

Layer-by-layer (LBL) polyelectrolyte films were constructed from poly(L-glutamic acid) (PGA) and poly(L-aspartic acid) (PAA) as polyanions, and from poly(L-lysine) (PLL) as the polycation. The terminating layer of the films was always PLL. According to attenuated total reflection Fourier transform infrared measurements, the PGA/PLL and PAA/PLL films, despite their chemical similarity, had largely different secondary structures. Extended beta-sheets dominated the PGA/PLL films, while alpha-helices and intramolecular beta-sheets dominated the PAA/PLL films. The secondary structure of the polyelectrolyte film affected the adsorption of human serum albumin (HSA) as well. HSA preserved its native secondary structure on the PGA/PLL film, but it became largely deformed on PAA/PLL films. Both PGA and PAA were able to extrude to a certain extent the other polyanion from the films, but the structural consequences were different. Adding PAA to a (PGA/PLL)5-PGA film resulted in a simple exchange and incorporation: PGA/PLL and PAA/PLL complexes coexisted with their unaltered secondary structures in the mixed film. The incorporation of PGA into a (PAA/PLL)5-PAA film was up to 50% and caused additional beta-structure increase in the secondary structure of the film. The proportions of the two polyanions were roughly the same on the surfaces and in the interiors of the films, indicating practically free diffusion for both polyanions. The abundance of PAA/PLL and PGA/PLL domains on the film surfaces was monitored by the analysis of the amide I region of the infrared spectrum of a reporter molecule, HSA, adsorbed onto the three-component polyelectrolyte films.     

Polypeptide-templated synthesis of hexagonal silica platelets

Several studies have demonstrated the use of biomimetic approaches in the synthesis of a variety of inorganic materials. Poly-L-lysine (PLL) promotes the precipitation of silica from a silicic acid solution within minutes. The molecular weight of PLL was found to affect the morphology of the resulting silica precipitate. Larger-molecular weight PLL produced hexagonal silica platelets, whereas spherical silica particles were obtained using low-molecular weight PLL. Here we report on the polypeptide secondary-structure transition that occurs during the silicification reaction. The formation of the hexagonal silica platelets is attributed to the PLL helical chains that are formed in the presence of monosilicic acid and phosphate ions. Hexagonal PLL crystals can also serve as templates in directing the growth of the silica in a manner that generates a largely mesoporous silica phase that is oriented with respect to the protein crystal template.     

Coordination-based gold nanoparticle layers

Gold nanoparticle (NP) mono- and multilayers were constructed on gold surfaces using coordination chemistry. Hydrophilic Au NPs (6.4 nm average core diameter), capped with a monolayer of 6-mercaptohexanol, were modified by partial substitution of bishydroxamic acid disulfide ligand molecules into their capping layer. A monolayer of the ligand-modified Au NPs was assembled via coordination with Zr4+ ions onto a semitransparent Au substrate (15 nm Au, evaporated on silanized glass and annealed) precoated with a self-assembled monolayer of the bishydroxamate disulfide ligand. Layer-by-layer construction of NP multilayers was achieved by alternate binding of Zr4+ ions and ligand-modified NPs onto the first NP layer. Characterization by atomic force microscopy (AFM), ellipsometry, wettability, transmission UV-vis spectroscopy, and cross-sectional transmission electron microscopy showed regular growth of NP layers, with a similar NP density in successive layers and gradually increased roughness. The use of coordination chemistry enables convenient step-by-step assembly of different ligand-possessing components to obtain elaborate structures. This is demonstrated by introducing nanometer-scale vertical spacing between a NP layer and the gold surface, using a coordination-based organic multilayer. Electrical characterization of the NP films was carried out using conductive AFM, emphasizing the barrier properties of the organic spacer multilayer. The results exhibit the potential of coordination self-assembly in achieving highly controlled composite nanostructures comprising molecules, NPs, and other ligand-derivatized components.     

Electrostatic layer-by-layer assembled carbon nanotube multilayer film and its electrocatalytic activity for O2 reduction

Multilayer films of shortened multiwalled carbon nanotubes (MWNTs) are homogeneously and stably assembled on glassy carbon electrodes with the layer-by-layer (LBL) method, based on electrostatic interaction of positively charged poly(diallyldimethylammonium chloride) and negatively charged and shortened MWNTs. The film assembly and electrochemical property as well as the electrocatalytic activity toward O2 reduction of the MWNT multilayer film are studied. Scanning electron microscopy, the quartz crystal microbalance technique, ultraviolet-visible-near-infrared spectroscopy, and cyclic voltammetry are used for characterization of film assembly. Experimental results revealed that film growth is uniform, almost with the same coverage of the MWNTs in each layer, and that the assembled MWNTs are mainly in the form of small bundles or single tubes on the electrodes. Electrochemical studies indicate that the LBL assembled MWNT films possess a remarkable electrocatalytic activity toward O2 reduction in alkaline media. This property, combined with the well-dispersed, porous and conductive features of the MWNT film illustrated with the LBL method, suggests the potential application of the MWNT film for constructing an efficient alkaline air electrode for energy conversions.     

Quantum dot on a rope

The conjugation of nanoparticles (NPs) typically yields supramolecular materials which are fairly rigid, and the electronic coupling between the NP and other structural units of these compounds is fixed by covalent bonds. Here, we report on a novel bichromophor system constructed from a quantum dot tethered to a semiconducting polymer, which demonstrates the possibility of the dynamic interunit coupling in the NP supramolecules. The NP bichromophoric system was made on the basis of the layer-by-layer assembled (LBL) films of an anionic polyelectrolyte with poly(p-phenylene ethynylene) backbone, aPPE, and poly(allylamine hydrochloride) PAH polycation. To conjugate CdTe NPs to the (aPPE/PAH)(m) LBL film, we took advantage of the reactive groups of NP stabilizer, that is, -COOH, and the aminogroups on PAH. Tethering of CdTe was accomplished by using poly(ethyleneglycole), PEG, chains with two reactive terminals such as t-BOC-NH-PEG-COO-NHS. The evidence for successful conjugation of NPs to the LBL films can be seen both in AFM images and in optical data. The latter also indicate that the light quanta emitted by the NPs originate from the light absorption of the polymer film, which proves the presence of the aPPE-->NP energy-transfer process. The average separation distance between the NPs tethered to the LBL films can be changed by altering the dielectric properties of the solvent affecting PEG tether coiling (water/alcohol mixture). The reduced emission intensity of aPPE was found to follow the extension of the PEG tether. The quenching of aPPE is reversible when the original composition of the solvent mixture is restored. Thus, CdTe-PEG-aPPE is an example of an organized NP system with tunable optical coupling. Variable electronic coupling offers a convenient structural platform for new nanotechnological devices for which spatial control translates into a higher level of sophistication. PEG molecules afford a wide variety of polymer chain configurations with different reactive terminals, which makes possible the preparation of diverse NP superstructures.     

Polyelectrolyte-templated synthesis of bimetallic nanoparticles

Bimetallic nanoparticles (NPs) are known to exhibit enhanced optical and catalytic properties that can be optimized by tailoring NP composition, size, and morphology. Galvanic deposition of a second metal onto a primary metal NP template is a versatile method for fabricating bimetallic NPs using a scalable, solution-based synthesis. We demonstrate that the galvanic displacement reaction pathway can be controlled through appropriate surface modification of the NP template. To synthesize bimetallic Au-Ag NPs, we used colloidal Ag NPs modified by layer-by-layer (LBL) assembled polyelectrolyte layers to template the reduction of HAuCl(4). NPs terminated with positively and negatively charged polyelectrolytes yield highly contrasting morphologies and Au surface concentrations. We propose that these charged surface layers control galvanic charge transfer by controlling nucleation and diffusion at the deposition front. This surface-directed synthetic strategy can be advantageously used to tailor both overall NP morphology and Au surface concentrations.     

Influence of the polyelectrolyte molecular weight on exponentially growing multilayer films in the linear regime

Alternated deposition of polyanions and polycations on a charged solid substrate leads to the buildup of polyelectrolyte multilayer (PEM) films. Two types of PEM films were reported in the literature: films whose thickness increases linearly and films whose thickness increases exponentially with the number of deposition steps. However, it was recently found that, for exponentially growing films, the exponential increase of the film thickness takes place only during the initially deposited pairs of layers and is then followed by a linear increase. In this study, we investigate the growth process of hyaluronic acid/poly(L-lysine) (HA/PLL) and poly(L-glutamic acid)/poly(allylamine) (PGA/PAH) films, two films whose growth is initially exponential, when the growth process enters the linear regime. We focus, in particular, on the influence of the molecular weight (Mw) of the polyelectrolytes. For both systems, we find that the film thickness increment per polyanion/polycation deposition step in the linear growth regime is fairly independent of the molecular weights of the polyelectrolytes. We also find that when the (HA/PLL)n films are constructed with low molecular weight PLL, these chains can diffuse into the entire film during each buildup cycle, even for very thick films, whereas the PLL diffusion of high molecular weight chains is restricted to the upper part of the film. Our results lead to refinement of the buildup mechanism model, introduced previously for the exponentially growing films, which is based on the existence of three zones over the entire film thickness. The mechanism no longer needs all the "in" and "out" diffusing polyanions or polycations to be involved in the buildup process to explain the linear growth regime but merely relies on the interaction between the polyelectrolytes with an upper zone of the film. This zone is constituted of polyanion/polycation complexes which are "loosely bound" and rich in the polyelectrolyte deposited during the former deposition step.     

Self-assembly of multilayer films containing gold nanoparticles via hydrogen bonding

Polymer/Au nanoparticle multilayer ultrathin films are fabricated via hydrogen-bonding interaction by a layer-by-layer technique. The Au nanoparticles surface-modified with pyridine groups of poly(4-vinylpyridine) (PVP) are prepared in dimethyl formamide (DMF). Transmission electron microscopy (TEM) image shows that uniform nanoparticles are dispersed in the PVP chains. Poly(3-thiophene acetic acid) (PTAA) and poly(acrylic acid) (PAA) are utilized to form hydrogen bonds with PVP, respectively. Considering the pH-sensitive dissociation behavior of PTAA and PAA, we investigate the release behavior of the Au-containing multilayers at different pH values in this work. UV-vis spectroscopy and atomic force microscopy (AFM) are employed to monitor the buildup and the release of the multilayers. The results indicate that in the films assembled with gold nanoparticles, the polymers are difficult to be removed from the substrate. The interaction between the gold particles and the neighboring PVP chains is responsible for the phenomenon. Gold particles act as physical cross-link points in the multilayers. Due to the additional interaction caused by the gold nanoparticles in the films except the hydrogen-bonding interaction between PTAA (or PAA) and PVP, the stability of the Au-containing multilayer film is ensured even though the changes in pH values may result in the break of the hydrogen bonds.     

自掺杂基团对聚苯胺自组装膜电化学性能的影响

基于离子相互作用,实现了以聚苯胺(PANI)为聚阳离子,以聚(邻氨基苯甲酸)(PCAN)、聚(邻氨基苯磺酸)(PSAN)为聚阴离子的层-层自组装,形成层厚均匀的全共轭超薄功能膜.由于磺酸基—SO3-的电负性高于—COO-,使得PANI-PSAN自组装膜沉积量小于PANI-PCAN;电化学实验结果显示,由于PCAN和PSAN的导电性均弱于PANI,所以两种自组装膜的电化学性能取决于PANI,但同时受到羧酸、磺酸基团的较大影响,使得PANI-PCAN自组装膜的电化学性能要优于PANI-PSAN.     

Synthesis, characterization, and immobilization of Prussian blue-modified Au nanoparticles: application to electrocatalytic reduction of H2O2

Au nanoparticles modified with electroactive Prussian blue (PB) were for the first time synthesized by a simple chemical method. Transmission electronic microscopy showed that the average size of the Prussian blue shell/Au core hybrid composite (PB@Au) was about 50 nm, and Fourier transform IR, UV-vis spectra, and cyclic voltammetry confirmed the existence of PB on the surface of Au nanoparticles. Using the LbL technique, multilayer thin films of PB@Au nanoparticles were prepared by the alternate adsorption of oppositely charged linear polyelectrolyte poly(allylamine hydrochloride) (PAH) onto ITO glass for the construction of a hydrogen peroxide sensor. The novel multilayer films were characterized by SEM, cyclic voltammetry, and UV-visible absorption spectroscopy. The {PAH/PB@Au}n multilayer-modified electrode showed a well-defined pair of redox peaks and dramatic catalytic activity toward the reduction of hydrogen peroxide.