Enzyme-free surface plasmon resonance aptasensor for amplified detection of adenosine via target-triggering strand displacement cycle and Au nanoparticles

Herein, we combine the advantage of aptamer technique with the amplifying effect of an enzyme-free signal-amplification and Au nanoparticles (NPs) to design a sensitive surface plasmon resonance (SPR) aptasensor for detecting small molecules. This detection system consists of aptamer, detection probe (c-DNA1) partially hybridizing to the aptamer strand, Au NPs-linked hairpin DNA (Au-H-DNA1), and thiolated hairpin DNA (H-DNA2) previously immobilized on SPR gold chip. In the absence of target, the H-DNA1 possessing hairpin structure cannot hybridize with H-DNA2 and thereby Au NPs will not be captured on the SPR gold chip surface. Upon addition of target, the detection probe c-DNA1 is forced to dissociate from the c-DNA1/aptamer duplex by the specific recognition of the target to its aptamer. The released c-DNA1 hybridizes with Au-H-DNA1 and opens the hairpin structure, which accelerate the hybridization between Au-H-DNA1 and H-DNA2, leading to the displacement of the c-DNA1 through a branch migration process. The released c-DNA1 then hybridizes with another Au-H-DNA1 probe, and the cycle starts anew, resulting in the continuous immobilization of Au-H-DNA1 probes on the SPR chip, generating a significant change of SPR signal due to the electronic coupling interaction between the localized surface plasma of the Au NPs and the surface plasma wave. With the use of adenosine as a proof-of-principle analyte, this sensing platform can detect adenosine specifically with a detection limit as low as 0.21 pM, providing a simple, sensitive and selective protocol for small target molecules detection.     

Multi-wall carbon nanotubes (MWCNTs)-doped polypyrrole DNA biosensor for label-free detection of genetically modified organisms by QCM and EIS

In this paper, we describe DNA electrochemical detection for genetically modified organism (GMO) based on multi-wall carbon nanotubes (MWCNTs)-doped polypyrrole (PPy). DNA hybridization is studied by quartz crystal microbalance (QCM) and electrochemical impedance spectroscopy (EIS). An increase in DNA complementary target concentration results in a decrease in the faradic charge transfer resistance (R_ct) and signifying “signal-on” behavior of MWCNTs-PPy-DNA system. QCM and EIS data indicated that the electroanalytical MWCNTs-PPy films were highly sensitive (as low as 4 pM of target can be detected with QCM technique). In principle, this system can be suitable not only for DNA but also for protein biosensor construction.     

Target-driven self-assembly of stacking deoxyribonucleic acids for highly sensitive assay of proteins

In this paper, we report a new signal amplification strategy for highly sensitive and enzyme-free method to assay proteins based on the target-driven self-assembly of stacking deoxyribonucleic acids (DNA) on an electrode surface. In the sensing procedure, binding of target protein with the aptamer probe is used as a starting point for a scheduled cycle of DNA hairpin assembly, which consists of hybridization, displacement and target regeneration. Following numbers of the assembly repeats, a great deal of DNA duplexes can accordingly be formed on the electrode surface, and then switch on a succeeding propagation of self-assembled DNA concatemers that provide further signal enhancement. In this way, each target binding event can bring out two cascaded DNA self-assembly processes, namely, stacking DNA self-assembly, and therefore can be converted into remarkably intensified electrochemical signals by associating with silver nanoparticle-based readout. Consequently, highly sensitive detection of target proteins can be achieved. Using interferon-gamma as a model, the assay method displays a linear range from 1 to 500 pM with a detection limit of 0.57 pM, which is comparable or even superior to other reported amplified assays. Moreover, the proposed method eliminates the involvement of any enzymes, thereby enhancing the feasibility in clinical diagnosis.     

Hairpin Assembly Amplified Electrochemical Biosensor for Highly Sensitive and Specific Detection of DNA

In this report, a simple electrochemical biosensor has been developed for highly sensitive and specific detection of DNA based on hairpin assembly amplification. In the presence of target DNA, the biotin‐labelled hairpin H1 is opened by hybridizing with target DNA through complementary sequences. Then the opened hairpin H1 assembles with the hairpin H2 to displace the target DNA, generating H1‐H2 complex. The displaced target DNA could trigger the next cycle of hairpins assembly, resulting in the generation of numerous H1‐H2 complexes. Subsequently, the H1‐H2 complex hybridizes with the capture probe immobilized on the electrode. Finally, the streptavidin alkaline phosphatase (ST‐ALP) binds to biotin in the capture probe‐H1‐H2 complex and catalyzes the substrate α‐naphthol (α‐NP) to produce electrochemical signal. To make a more fascinating hairpin assembly amplification strategy in signal amplification, mismatched base sequences are designed in hairpin H2 to decrease non‐specific binding of the hairpin substrates. The developed biosensor achieves a sensitivity of 20 pM with a linear range from 25 pM to 25 nM, and shows high selectivity toward single‐base mismatch. Thus, the proposed electrochemical biosensor might have the potential for early clinical diagnosis and therapy.     

DNA recognition interfaces: the influence of interfacial design on the efficiency and kinetics of hybridization

The effect of the surface chemistry of DNA recognition interfaces on DNA hybridization at a gold surface was investigated using both electrochemistry and the quartz crystal microbalance (QCM) technique. Different DNA recognition interfaces were prepared using a two-component self-assembled monolayer consisting of thiolated 20-mer probe single-stranded DNA (ss-DNA) containing either a 3'-mercaptopropyl or a 3'-mercaptohexyl linker group and an alcohol-terminated diluent layer with 2-, 6-, or 11-carbon length. The influence of the interfacial design on the hybridization efficiency, the affinity constant (Ka) describing hybridization, and the kinetics of hybridization was assessed. It was found that the further the DNA was above the surface defined by the diluent layer the higher the hybridization efficiency and Ka. The kinetics of DNA hybridization was assessed using both a QCM and an electrochemical approach to ascertain the influence of the interface on both the initial binding of target DNA to the surface and the formation of a complete duplex. These measurements showed that the length of the diluent layer has a large impact on the time taken to form a perfect duplex but no impact on the initial recognition of the target DNA by the immobilized probe DNA.     

Microfluidic nanoplasmonic-enabled device for multiplex DNA detection

We describe a rapid, quantitative, multiplex, self-labelled, and real-time DNA biosensor employing Ag nanoparticle-bound DNA hairpin probes immobilized in a microfluidic channel. Capture of complementary target DNAs by the microarrayed DNA hairpin probes results in a positive fluorescence signal via a conformational change of the probe molecules, signalling the presence of target DNAs. The device's capability for quantitative analyses was evaluated and a detection time as low as 6 min (with a target flow rate of 0.5 μl min(-1)) was sufficient to generate significant detection signals. This detection time translates to merely 3 μl of target solution consumption. An unoptimized sensitivity of 500 pM was demonstrated for this device.     

A Novel Electrochemical DNA Biosensor Fabricated with Layer‐by‐Layer Covalent Attachment of Multiwalled Carbon Nanotubes and Gold Nanoparticles

A novel DNA biosensor has been fabricated for the detection of DNA hybridization based on layer‐by‐layer (LBL) covalent assembly of gold nanoparticles (GNPs) and multiwalled carbon nanotubes (MWCNTs). The stepwise LBL assembly process was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The hybridization events were monitored by differential pulse voltammetry (DPV) measurement of the intercalated doxorubicin, and the factors influencing the performance of the DNA hybridization was investigated in detail. The signal was linearly changed with target DNA concentration increased from 0.5 to 0.01 nM, and had a detection limit of 7.5 pM (signal/noise ratio of 3). In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.     

Effect of secondary structure on the thermodynamics and kinetics of PNA hybridization to DNA hairpins.

The binding of a series of PNA and DNA probes to a group of unusually stable DNA hairpins of the tetraloop motif has been observed using absorbance hypochromicity (ABS), circular dichroism (CD), and a colorimetric assay for PNA/DNA duplex detection. These results indicate that both stable PNA-DNA and DNA-DNA duplexes can be formed with these target hairpins, even when the melting temperatures for the resulting duplexes are up to 50 degrees C lower than that of the hairpin target. Both hairpin/single-stranded and hairpin/hairpin interactions are considered in the scope of these studies. Secondary structures in both target and probe molecules are shown to depress the melting temperatures and free energies of the probe-target duplexes. Kinetic analysis of hybridization yields reaction rates that are up to 160-fold slower than hybridization between two unstructured strands. The thermodynamic and kinetic obstacles to hybridization imposed by both target and probe secondary structure are significant concerns for the continued development of antisense agents and especially diagnostic probes.     

Label free DNA detection based on gold nanoparticles quenching fluorescence of Rhodamine B

A novel and sensitive label free DNA detection method using gold nanoparticles (GNPs) and Rhodamine B (RB) has been developed. The assay is based on the following two properties. One is the different adsorption properties of single-stranded and double-stranded DNA on GNPs in colloidal solution. The other is the different quenching ability of aggregated GNPs and dispersed GNPs on RB. Un-aggregated GNPs could effectively quench the fluorescence of RB. However, the quenching ability greatly decreases after GNPs aggregated. The hybridization of probe DNA and target DNA is monitored by the fluorescence detection after the RB is added to the solution. Under the optimal experimental conditions, the detection limit of this assay is 2.9×10(-13) mol L(-1).     

Introducing curcumin as an electrochemical DNA hybridization indicator and its application for detection of human interleukin-2 gene

In this paper, the application of curcumin (CU) as a non-toxic electrochemical DNA hybridization indicator was described. Hybridization investigations on a pencil graphite electrode surface as a transducer using oligonucleotides containing only one base type, including poly A, poly T, poly C, and poly G as probe and as related complementary/non-complementary sequences, showed that CU has no specific interaction with each of the oligonucleotides of DNA. Furthermore, results showed good interaction between CU and the hybridized form of oligonucleotides; thus, the extent of hybridization was evaluated based on the difference between differential pulse voltammetry (DPV) signals of CU accumulated on the probe-pencil graphite electrode (PGE) and CU accumulated on the probe-target-PGE. Then, the developed biosensor was successfully applied for the detection of short sequences of human interleukin-2 (hIL-2) gene as a model. A hybridization experiment with non-complementary oligonucleotide showed that the suggested DNA sensor responds selectively to the target. At optimized conditions, two linear ranges were obtained for hIL-2 gene, first from 50 to 1000 pM and second from 0.01 to 1 μM with a detection limit of 12 pM. 7.0) containing 20 mM NaCl.     

Amplified electrochemiluminescence detection of nucleic acids by hairpin probe-based isothermal amplification

Here, we present a straightforward method for isothermal amplified detection of nucleic acids. In this proof-of-concept study, a specific DNA sequence is amplified through hairpin probe-based isothermal strand-displacement polymerization reaction and then detected via a sensitive and commercially available ECL detection platform. Results show that the DNA sequence derived from the Listeria monocytogenes hly gene can be detected down to 10 pM in solution, together with correlation of the detected signal with the initial concentration of target DNA. Moreover, the designed stem-loop structured hairpin probe shows single-base variation differentiating ability. Considering the superior sensitivity and specificity, as well as the simple-to-implement features, the developed assay demonstrates a great potential of becoming a first-line tool for quantitative analysis of nucleic acids for biomedical research.     

Electrochemical biosensor for microRNA detection based on hybridization protection against nuclease S1 digestion

Nuclease S1 can catalyze the nonspecific endo- and exonucleolytic cleavage of single-stranded DNA and RNA to yield nucleoside 5′-phosphates and 5′-phosphooligonucleotides. However, it cannot hydrolyze double-stranded DNA, double-stranded RNA, or DNA-RNA hybrid. Inspired by this specific property, a simple electrochemical method was developed for microRNA detection based on hybridization protection against nuclease S1 digestion. In the absence of hybridization process, the assembled probe DNA on the electrode surface can be easily digested by nuclease S1 and a strong electrochemical signal can be generated due to the decreased repulsive force towards the redox probe. However, after hybridization with target microRNA, the digestion activity of nuclease S1 is inhibited, which can lead to a weak electrochemical signal. Based on the change of the electrochemical signal, the detection of target microRNA-319a can be achieved. Under optimal experiment conditions, the electrochemical signal was proportional to microRNA-319a concentration from 1000 to 5 pM and the detection limit was 1.8 pM (S/N = 3). The developed method also showed high detection selectivity and reproducibility. Furthermore, the proposed method was successfully applied to assay the expression level of microRNA-319a in the leaves of rice seedlings after being incubated with different concentrations of 6-benzylaminopurine.     

Chemiluminescent detection of DNA hybridization and single-nucleotide polymorphisms on a solid surface using target-primed rolling circle amplification

A new chemiluminescent (CL) method has been developed for the sensitive detection of DNA hybridization and single-nucleotide polymorphisms (SNPs) with target-primed rolling circle amplification (RCA). The capture oligonucleotide probe is firstly immobilized on a polystyrene well plate and then hybridized with the wild DNA target. A designed padlock probe is circularized after perfect hybridization to the DNA target. Then the RCA reaction can be initiated from the DNA target that acts as a primer and generates a long tandem single-strand of DNA with repeat sequences. In contrast, the mutant DNA target, which contains a mismatched base with the padlock probe, cannot initiate the RCA reaction and primes only a limited extension with the unligated padlock probe. Afterwards, a biotinylated oligonucleotide is used to hybridize with the RCA product in each repeat sequence and streptavidin-alkaline phosphatase (STV-AP) is employed to combine the anchored biotin. The DNA target is detected with the CL reaction of STV-AP and 3-(2'-spiroadamantane)-4-methoxy-4-(3'-phosphoryloxy)phenyl-1,2-dioxetane (AMPPD). With the RCA-based method, the sensitivity of DNA detection can be increased by about two orders of magnitude compared with that of direct DNA hybridization. A DNA target as low as 3.6 pM can be detected. Wild-type DNA and the one-base mutant DNA can be differentiated with high selectivity through this RCA reaction.     

Molecular Engineering of DNA: Molecular Beacons

Molecular beacons (MBs) are specifically designed DNA hairpin structures that are widely used as fluorescent probes. Applications of MBs range from genetic screening, biosensor development, biochip construction, and the detection of single‐nucleotide polymorphisms to mRNA monitoring in living cells. The inherent signal‐transduction mechanism of MBs enables the analysis of target oligonucleotides without the separation of unbound probes. The MB stem–loop structure holds the fluorescence‐donor and fluorescence‐acceptor moieties in close proximity to one another, which results in resonant energy transfer. A spontaneous conformation change occurs upon hybridization to separate the two moieties and restore the fluorescence of the donor. Recent research has focused on the improvement of probe composition, intracellular gene quantitation, protein–DNA interaction studies, and protein recognition.     

A Host‐Guest‐Recognition‐Based Electrochemical Sensor for Sequence‐Specific DNA Detection

We herein constructed a sensor that converts target DNA hybridization‐induced conformational transformation of the probe DNA to electrochemical response based on host‐guest recognition and nanoparticle label. In the sensor, the hairpin DNA terminal‐labeled with 4‐((4‐(dimethylamino)phenyl)azo)benzoic acid (dabcyl) and thiol group was immobilized on Au electrode surface as the probe DNA by Au‐S bond, and the CdS nanoparticles surface‐modified with β‐cyclodextrins (CdS‐CDs) were employed as electrochemical signal provider and host‐guest recognition element. Initially, the probe DNA immobilized on electrode kept the stem‐loop configuration, which shielded dabcyl from docking with the CdS‐CDs in solution due to the steric effect. After target hybridization, the probe DNA underwent a significant conformational change, which forced dabcyl away from the electrode. As a result, formerly‐shielded dabcyl became accessible to host‐guest recognition between β‐cyclodextrin (β‐CD) and dabcyl, thus the target hybridization event could be sensitively transduced to electrochemical signal provided by CdS‐CDs. This host‐guest recognition‐based electrochemical sensor has been able to detect as low as picomolar DNA target with excellent differentiation ability for even single mismatch.     

Robust electrochemical system for screening single nucleotide polymorphisms

A highly sensitive and selective electrochemical DNA signaling scheme, which identifies the point mutation existing in target DNA sequence, is developed based on the combination of label-free hairpin probe (HP)/DNA endonuclease with zirconia (ZrO(2)) nanoparticle film, representing a promising screening platform for the accurate diagnosis of infections and genetic diseases as well as for environmental and forensic applications.     

The application of β-cyclodextrin derivative functionalized aligned carbon nanotubes for electrochemically DNA sensing via host-guest recognition

We functionalized aligned carbon nanotubes (ACNTs) electrode with a new kind of β-cyclodextrin (β-CD) derivative through diazotization reaction. The resulting β-CD/ACNTs electrode was used to detect DNA hybridization in homogeneous solution based on host–guest recognition technology. In the sensing protocol, one special DNA probe was designed with a stem-loop structure and both ends modified, which we called dually labeled DNA probe (DLP). One end of the DLP was labeled with dabcyl as guest molecule for β-CD/ACNTs electrode capture, and the other end was labeled with a CdS nanoparticle as an electrochemical tag to indicate the occurrence of DNA hybridization. In the absence of the target DNA sequence, the DLP maintains its hairpin structure in solution phase and would not be captured and detected by the β-CD/ACNTs electrode. In the presence of the complementary target sequence, the conformational structure of the DLP was altered and a double-stranded DNA (dsDNA) molecule was formed by the hybridization of DLP and complementary DNA sequence. Consequently, the dsDNA was captured by the β-CD/ACNTs electrode owing to guest–host recognition between β-CD and dabcyl. The electrochemical signal from the CdS nanoparticle–dsDNA/β-CD/ACNTs was then measured. Under optimized detection conditions, the proposed method showed high sensitivity and selectivity with a detection limit of 5.0 × 10⁻¹³ M for complementary DNA sequence.     

Zn(2+)-ligation DNAzyme-driven enzymatic and nonenzymatic cascades for the amplified detection of DNA

A generic fluorescence sensing platform for analyzing DNA by the Zn(2+)-dependent ligation DNAzyme as amplifying biocatalyst is presented. The platform is based on the target DNA induced ligation of two substrate subunits and the subsequent opening of a beacon hairpin probe by the ligated product. The strand displacement of the ligated product by the beacon hairpin is, however, of limited efficiency. Two strategies are implemented to overcome this limitation. By one method, a "helper" nucleic acid sequence is introduced into the system, and this hybridizes with the DNAzyme components and releases the ligated product for opening of the hairpin. By the second method, a nicking enzyme (Nt.BspQI) is added to the system, and this nicks the duplex between the beacon and ligated product while recycling the free ligation product. By combining the two coadded components ("helper" sequence and nicking enzyme), the sensitive detection of the analyte is demonstrated (detection limit, 20 pM). The enzyme-free amplified fluorescence detection of the target DNA is further presented by the Zn(2+)-dependent ligation DNAzyme-driven activation of the Mg(2+)-dependent DNAzyme. According to this method, the Mg(2+)-dependent DNAzyme subunits displace the ligated product, and the resulting assembled DNAzyme cleaves a fluorophore/quencher-modified substrate to yield fluorescence. The method enabled the detection of the target DNA with a detection limit corresponding to 10 pM. The different sensing platforms are implemented to detect the Tay-Sachs genetic disorder mutant.     

Catalytic Hairpin Assembly‐Programmed DNA Three‐Way Junction for Enzyme‐Free and Amplified Electrochemical Detection of Target DNA

DNA three‐way junctions (DNA 3WJ) have been widely used as important building blocks for the construction of DNA architectures and dynamic assemblies. Herein, we describe for the first time a catalytic hairpin assembly‐programmed DNA three‐way junction (CHA‐3WJ) strategy for the enzyme‐free and amplified electrochemical detection of target DNA. It takes full advantage of the target‐catalyzed hairpin assembly‐induced proximity effect of toehold and branch‐migration domains for the ingenious execution of the strand displacement reaction to form the DNA 3WJ on the electrode surface. A low detection limit of 0.5 pM with an excellent selectivity was achieved for target DNA detection. The developed CHA‐3WJ strategy also offers distinct advantages of simplicity in probe design and biosensor fabrication, as well as enzyme‐free operation. Thus, it opens a promising avenue for applications in bioanalysis, design of DNA‐responsive devices, and dynamic DNA assemblies.     

A DNA nanomachine based on rolling circle amplification-bridged two-stage exonuclease III-assisted recycling strategy for label-free multi-amplified biosensing of nucleic acid

An autonomous DNA nanomachine based on rolling circle amplification (RCA)-bridged two-stage exonuclease III (Exo III)-induced recycling amplification (Exo III-RCA-Exo III) was developed for label-free and highly sensitive homogeneous multi-amplified detection of DNA combined with sensitive fluorescence detection technique. According to the configuration, the analysis of DNA is accomplished by recognizing the target to a unlabeled molecular beacon (UMB) that integrates target-binding and signal transducer within one multifunctional design, followed by the target-binding of UMB in duplex DNA removed stepwise by Exo III accompanied by the releasing of target DNA for the successive hybridization and cleavage process and autonomous generation of the primer that initiate RCA process with a rational designed padlock DNA. The RCA products containing thousands of repeated catalytic sequences catalytically hybridize with a hairpin reporter probe that includes a “caged” inactive G-quadruplex sequence (HGP) and were then detected by Exo III-assisted recycling amplification, liberating the active G-quadruplex and generating remarkable ZnPPIX/G-quadruplex fluorescence signals with the help of zinc(II)-protoporphyrin IX (ZnPPIX). The proposed strategy showed a wide dynamic range over 7 orders of magnitude with a low limit of detection of 0.51 aM. In addition, this designed protocol can discriminate mismatched DNA from perfectly matched target DNA, and holds a great potential for early diagnosis in gene-related diseases.