Incarceration of Iodine in a Pyrene-Based Metal–Organic Framework

A pyrene-based metal-organic framework (MOF) SION-8 captured iodine (I₂) vapor with a capacity of 460 and 250 mg g⁻¹_MOF at room temperature and 75 °C, respectively. Single-crystal X-ray diffraction analysis and van-der-Waals-corrected density functional theory calculations confirmed the presence of I₂ molecules within the pores of SION-8 and their interaction with the pyrene-based ligands. The I₂–pyrene interactions in the I₂-loaded SION-8 led to a 10⁴-fold increase of its electrical conductivity compared to the bare SION-8 . Upon adsorption, ≥95 % of I₂ molecules were incarcerated and could not be washed out, signifying the potential of SION-8 towards the permanent capture of radioactive I₂ at room temperature.     

Evidence of a Uranium-Paddlewheel Node in a Catecholate-Based Metal–Organic Framework

The interactions between uranium and non-innocent organic species are an essential component of fundamental uranium redox chemistry. However, they have seldom been explored in the context of multidimensional, porous materials. Uranium-based metal–organic frameworks (MOFs) offer a new angle to study these interactions, as these self-assembled species stabilize uranium species through immobilization by organic linkers within a crystalline framework, while potentially providing a method for adjusting metal oxidation state through coordination of non-innocent linkers. We report the synthesis of the MOF NU-1700 , assembled from U⁴⁺-paddlewheel nodes and catecholate-based linkers. We propose this highly unusual structure, which contains two U⁴⁺ ions in a paddlewheel built from four linkers—a first among uranium materials—as a result of extensive characterization via powder X-ray diffraction (PXRD), sorption, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), in addition to density functional theory (DFT) calculations.     

Reversible Postsynthetic Modification in a Metal–Organic Framework

Postsynthetic modification (PSM) of metal–organic frameworks (MOFs) provides access to functional materials and advanced porous solid engineering. Herein, we report the reversible PSM of a multivariate isoreticular MOF by applying dynamic furan-maleimide Diels–Alder (DA) chemistry. The key step involves incorporating a furan group into the MOF via “click” PSM, which can then undergo repeated cycles of modification and de-modification with maleimides. The structural integrity, crystallinity, and porosity of the furan-appended MOF remained intact even after three consecutive PSM/de-modification cycles using three different functionalized maleimides.     

Coordination-Induced Band Gap Reduction in a Metal–Organic Framework

Herein, we report on the synthesis of a microporous, three-dimensional phosphonate metal–organic framework (MOF) with the composition Cu₃(H₅-MTPPA)₂ ⋅ 2 NMP (H₈-MTPPA=methane tetra-p-phenylphosphonic acid and NMP=N-methyl-2-pyrrolidone). This MOF, termed TUB1, has a unique one-dimensional inorganic building unit composed of square planar and distorted trigonal bipyramidal copper atoms. It possesses a (calculated) BET surface area of 766.2 m²/g after removal of the solvents from the voids. The Tauc plot for TUB1 yields indirect and direct band gaps of 2.4 eV and 2.7 eV, respectively. DFT calculations reveal the existence of two spin-dependent gaps of 2.60 eV and 0.48 eV for the alpha and beta spins, respectively, with the lowest unoccupied crystal orbital for both gaps predominantly residing on the square planar copper atoms. The projected density of states suggests that the presence of the square planar copper atoms reduces the overall band gap of TUB1, as the beta-gap for the trigonal bipyramidal copper atoms is 3.72 eV.     

Stabilizing DNAzymes through Encapsulation in a Metal–Organic Framework

DNAzymes are a promising class of bioinspired catalyst; however, their structural instability limits their potential. Herein, a method to stabilize DNAzymes by encapsulating them in a metal–organic framework (MOF) host is reported. This biomimetic mineralization process makes DNAzymes active under a wider range of conditions. The concept is demonstrated by encapsulating hemin-G-quadruplex (Hemin-G4) into zeolitic imidazolate framework-90 (ZIF-90), which indeed increases the DNAzyme's structural stability. The stabilized DNAzymes show activities in the presence of Exonuclease I, organic solvents, or high temperature. Owing to its elevated stability and heterogeneous nature, it is possible to perform catalysis under continuous-flow conditions, and the DNAzyme can be reactivated in situ by introducing K⁺. Moreover, it is found that the encapsulated DNAzyme maintains its high enantiomer selectivity, demonstrated by the sulfoxidation of thioanisole to (S)-methyl phenyl sulfoxide. This concept of stabilizing DNAzymes expands their potential application in chemical industry.     

Emergence of a Radical-Stabilizing Metal–Organic Framework as a Radio-photoluminescence Dosimeter

Radio-photoluminescence (RPL) materials display a distinct radiation-induced permanent luminescence center, and therefore find application in the detection of ionizing radiation. The current inventory of RPL materials, which were discovered by serendipity, has been limited to a small number of metal-ion-doped inorganic materials. Here we document the RPL of a metal–organic framework (MOF) for the first time: X-ray induced free radicals are accumulated on the organic linker and are subsequently stabilized in the conjugated fragment in the structure, while the metal center acts as the X-ray attenuator. These radicals afford new emission features in both UV-excited and X-ray excited luminescence spectra, making it possible to establish linear relationships between the radiation dose and the normalized intensity of the new emission feature. The MOF-based RPL materials exhibit advantages in terms of the dose detection range, reusability, emission stability, and energy threshold. Based on a comprehensive electronic structure and energy diagram study, the rational design and a substantial expansion of candidate RPL materials can be anticipated.     

Solvent-Driven Reversible Phase Transition of a Pillared Metal–Organic Framework

Over the last decade, the controllable reversible phase transition of functional materials has received growing interest as it shows unique suitability for various technological applications. Although many metal–organic frameworks (MOFs) possess a lamellar structure, the reversible structural transformation of MOFs between their three-dimensional (3D) phase and two-dimensional (2D) phase remains a largely unexplored area. Herein, we report for the first time a europium MOF with unprecedented reversible morphology in different solvents at room temperature. This europium MOF displayed a 3D nanorod morphology in organic solvent and a 2D nanobelt architecture in water. As a proof of concept for potential applications of this reversible-phase-transition MOF, we were able to use a delamination recovery method to load dye molecules that previously could not be loaded into europium MOFs.     

A Chemiluminescent Metal–Organic Framework

The synthesis and characterization of a chemiluminescent metal–organic framework with high porosity is reported. It consists of Zr₆O₆(OH)₄ nodes connected by 4,4′-(anthracene-9,10-diyl)dibenzoate as the linker and luminophore. It shows the topology known for UiO-66 and is therefore denoted PAP-UiO. The MOF was not only obtained as bulk material but also as a thin film. Exposure of PAP-UiO as bulk or film to a mixture of bis-(2,4,6-trichlorophenyl) oxalate, hydrogen peroxide, and sodium salicylate in a mixture of dimethyl and dibutyl phthalate evoked strong and long lasting chemiluminescence of the PAP-UiO crystals. Time dependent fluorescence spectroscopy on bulk PAP-UiO and, for comparison, on dimethyl 4,4′-(anthracene-9,10-diyl)dibenzoate provided evidence that the chemiluminescence originates from luminophores being part of the PAP-UiO, including the luminophores inside the crystals.     

Solvent-Vapor-Induced Reversible Single-Crystal-to-Single-Crystal Transformation of a Triphosphaazatriangulene-Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha-Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π-conjugated framework, which enables the stimuli-responsive reversible transformation of [Cu(HL)(DMSO)⋅(MeOH)]_n, a 3D-MOF that exhibits reversible sorption characteristics, into (H₃L⋅0.5 [Cu₂(OH)₄⋅6 H₂O] ⋅4 H₂O), a 1D-columnar assembled proton-conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10⁻³ S cm⁻¹ at 95 % relative humidity and 60 °C.     

Photophysics of Azobenzene Constrained in a UiO Metal–Organic Framework: Effects of Pressure,Solvation and Dynamic Disorder

Photophysical studies of chromophoric linkers in metal–organic frameworks (MOFs) are undertaken commonly in the context of sensing applications, in search of readily observable changes of optical properties in response to external stimuli. The advantages of the MOF construct as a platform for investigating fundamental photophysical behaviour have been somewhat overlooked. The linker framework offers a unique environment in which the chromophore is geometrically constrained and its structure can be determined crystallographically, but it exists in spatial isolation, unperturbed by inter-chromophore interactions. Furthermore, high-pressure studies enable the photophysical consequences of controlled, incremental changes in local environment or conformation to be observed and correlated with structural data. This approach is demonstrated in the present study of the trans-azobenzene chromophore, constrained in the form of the 4,4’-azobenzenedicarboxylate (abdc) linker, in a UiO topology framework. Previously unobserved effects of pressure-induced solvation and conformational distortion on the lowest energy, nπ* transition are reported, and interpreted the light of crystallographic data. It was found that trans-azobenzene remains non-fluorescent (with a quantum yield less than 10⁻⁴) despite the prevention of trans-cis isomerization by the constraining MOF structure. We propose that efficient non-radiative decay is mediated by the local, pedal-like twisting of the azo group that is evident as dynamic disorder in the crystal structure.     

High Ammonia Uptake of a Metal–Organic Framework Adsorbent in a Wide Pressure Range

Although numerous porous adsorbents have been investigated for NH₃ capture applications, these materials often exhibit insufficient NH₃ uptake, low NH₃ affinity at the ppm level, and poor chemical stability against wet NH₃ conditions. The NH₃ capture properties of M₂(dobpdc) complexes (M=Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, and Zn²⁺; dobpdc⁴⁻=4,4-dioxidobiphenyl-3,3-dicarboxylate) that contain open metal sites is presented. The NH₃ uptake of Mg₂(dobpdc) at 298 K was 23.9 mmol g⁻¹ at 1 bar and 8.25 mmol g⁻¹ at 570 ppm, which are record high capacities at both pressures among existing porous adsorbents. The structural stability of Mg₂(dobpdc) upon exposure to wet NH₃ was superior to that of the other M₂(dobpdc) and the frameworks tested. Overall, these results demonstrate that Mg₂(dobpdc) is a recyclable compound that exhibits significant NH₃ affinity and capacity, making it a promising candidate for real-world NH₃-capture applications.     

Imparting Multifunctionality by Utilizing Biporosity in a Zirconium-Based Metal–Organic Framework

In this work, we have synthesized nanocomposites made up of a metal–organic framework (MOF) and conducting polymers by polymerization of specialty monomers such as pyrrole (Py) and 3,4-ethylenedioxythiophene (EDOT) in the voids of a stable and biporous Zr-based MOF ( UiO-66 ). FTIR and Raman data confirmed the presence of polypyrrole ( PPy ) and poly3,4-ethylenedioxythiophene ( PEDOT ) in UiO-66-PPy and UiO-66-PEDOT nanocomposites, respectively, and PXRD data revealed successful retention of the structure of the MOF. HRTEM images showed successful incorporation of polymer fibers inside the voids of the framework. Owing to the intrinsic biporosity of UiO-66 , polymer chains were observed to selectively occupy only one of the voids. This resulted in a remarkable enhancement (million-fold) of the electrical conductivity while the nanocomposites retain 60–70 % of the porosity of the original MOF. These semiconducting yet significantly porous MOF nanocomposite systems exhibited ultralow thermal conductivity. Enhanced electrical conductivity with lowered thermal conductivity could qualify such MOF nanocomposites for thermoelectric applications.     

Properties of Single-Component Metal–Organic Framework Crystal-Glass Composites

The formation, and subsequent structural, thermal and adsorptive properties of single-component metal–organic framework crystal-glass composites (MOF-CGCs) are investigated. A series of novel materials exhibiting chemically identical glassy and crystalline phases within the same material were produced, where crystalline ZIF-62(Zn) was incorporated within an a_gZIF-62(Zn) matrix. X-ray diffraction showed that the crystalline phase was still present after heating to above the glass transition temperature of a_gZIF-62(Zn), and interfacial compatibility between the crystalline and glassy phases was investigated using a mixed-metal (ZIF-62(Co))_0.5(a_gZIF-62(Zn))_0.5 analogue. CO₂ gas adsorption measurements showed that the CO₂ uptakes of the MOF-CGCs were between those of the crystalline and glassy phases.     

Photocatalytic Dehalogenative Deuteration of Halides over a Robust Metal–Organic Framework

Deuterium labelling of organic compounds is an important process in chemistry. We report the first example of photocatalytic dehalogenative deuteration of both arylhalides and alkylhalides (40 substrates) over a metal–organic framework, MFM-300(Cr), using CD₃CN as the deuterium source at room temperature. MFM-300(Cr) catalyses high deuterium incorporation and shows excellent tolerance to various functional groups. Synchrotron X-ray powder diffraction reveals the activation of halogenated substrates via confined binding within MFM-300(Cr). In situ electron paramagnetic resonance spectroscopy confirms the formation of carbon-based radicals as intermediates and reveals the reaction pathway. This protocol removes the use of precious-metal catalysts from state-of-the-art processes based upon direct hydrogen isotope exchange and shows high photocatalytic stability, thus enabling multiple catalytic cycles.     

Selective Formation of Polyaniline Confined in the Nanopores of a Metal–Organic Framework for Supercapacitors

In this study, a strategy that can result in the polyaniline (PANI) solely confined within the nanopores of a metal–organic framework (MOF) without forming obvious bulk PANI between MOF crystals is developed. A water-stable zirconium-based MOF, UiO-66-NH₂, is selected as the MOF material. The polymerization of aniline is initiated in the acidic suspension of UiO-66-NH₂ nanocrystals in the presence of excess poly(sodium 4-styrenesulfonate) (PSS). Since the pore size of UiO-66-NH₂ is too small to enable the insertion of the bulky PSS, the quick formation of pore-confined solid PANI and the slower formation of well dispersed PANI:PSS occur within the MOF crystals and in the bulk solution, respectively. By taking advantage of the resulting homogeneous PANI:PSS polymer solution, the bulk PANI:PSS can be removed from the PANI/UiO-66-NH₂ solid by successive washing the sample with fresh acidic solutions through centrifugation. As this is the first time reporting the PANI solely confined in the pores of a MOF, as a demonstration, the obtained PANI/UiO-66-NH₂ composite material is applied as the electrode material for supercapacitors. The PANI/UiO-66-NH₂ thin films exhibit a pseudocapacitive electrochemical characteristic, and their resulting electrochemical activity and charge-storage capacities are remarkably higher than those of the bulk PANI thin films.     

A General Preparation of Solid Solution-Oxide Heterojunction Photocatalysts through Metal–Organic Framework Transformation Induced Pre-nucleation

Solid solution-oxide heterostructures combine the advantages of solid solution and heterojunction materials to improve electronic structure and optical properties by metal doping, and enhance charge separation and transfer in semiconductor photocatalysts by creating a built-in electric field. Nevertheless, the effective design and synthesis of these materials remains a significant challenge. Here, we develop a generally applicable strategy that leverages the transformable properties of metal–organic frameworks (MOFs) to prepare solid solution-oxide heterojunctions with controllable structural and chemical compositions. The process consists of three main steps. First, MOFs with different topological structures and metal centers are transformed, accompanied by pre-nucleation of a metal oxide. Second, solid solution is prepared through calcination of the transformed MOFs. Finally, a heterojunction is formed by combining solid solution with another metal oxide group through endogenous overflow. DFT calculations and study on carrier dynamics show that the structure of the material effectively prevents electrons from returning to the bulk phase, exhibiting superior photocatalytic reduction performance of CO₂. This study is expected to promote the controllable synthesis and research of MOF-derived heterojunctions.     

Atomistic Insight Into the Host–Guest Interaction of a Photoresponsive Metal–Organic Framework

Photoresponsive functional materials have gained increasing attention due to their externally tunable properties. Molecular switches embedded in these materials enable the control of phenomena at the atomic level by light. Metal–organic frameworks (MOFs) provide a versatile platform to immobilize these photoresponsive units within defined molecular environments to optimize the intended functionality. For the application of these photoresponsive MOFs (pho-MOFs), it is crucial to understand the influence of the switching state on the host–guest interaction. Therefore, we present a detailed insight into the impact of molecular switching on the intermolecular interactions. By performing atomistic simulations, we revealed that due to different interactions of the guest molecules with the two isomeric states of an azobenzene-functionalized MOF, both the adsorption sites and the orientation of the molecules within the pores are modulated. By shedding light on the host–guest interaction, our study highlights the unique potential of pho-MOFs to tailor molecular interaction by light.     

A Spiderweb-Like Metal–Organic Framework Multifunctional Foam

Processing metal–organic frameworks (MOFs) into hierarchical macroscopic materials can greatly extend their practical applications. However, current strategies suffer from severe aggregation of MOFs and limited tuning of the hierarchical porous network. Now, a strategy is presented that can simultaneously tune the MOF loading, composition, spatial distribution, and confinement within various bio-originated macroscopic supports, as well as control the accessibility, robustness, and formability of the support itself. This method enables the good dispersion of individual MOF nanoparticles on a spiderweb-like network within each macrovoid even at high loadings (up to 86 wt %), ensuring the foam pores are highly accessible for excellent adsorption and catalytic capacity. Additionally, this approach allows the direct pre-incorporation of other functional components into the framework. This strategy provides precise control over the properties of both the hierarchical support and MOF.     

Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient-wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr-based MIL-101 while retaining the crystal framework, morphology, and high stability of MIL-101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL-101, more affinity sites for CO₂ are created in the resulting CB6@MIL-101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.