Realizing Textured Zinc Metal Anodes through Regulating Electrodeposition Current for Aqueous Zinc Batteries

Crystallography modulation of zinc (Zn) metal anode is promising to promote Zn reversibility in aqueous electrolytes, but efficiently constructing Zn with specific crystallographic texture remains challenging. Herein, we report a current-controlled electrodeposition strategy to texture the Zn electrodeposits in conventional aqueous electrolytes. Using the electrolytic cell with low-cost Zn(CH₃COO)₂ electrolyte and Cu substrate as a model system, the texture of as-deposited Zn gradually transforms from (101) to (002) crystal plane as increasing the current density from 20 to 80 mA cm⁻². Moreover, the high current accelerates the Zn nucleation rate with abundant nuclei, enabling uniform deposition. The (002) texture permits stronger resistance to dendrite growth and interfacial side reactions than the (101) texture. The resultant (002)-textured Zn electrode achieves deep cycling stability and supports the stable operation of full batteries with conventional V/Mn-based oxide cathodes.     

From Zinc Clusters to One-Dimensional Crystals on Quasi-Free Sustained Substrates

By using the Amsterdam density functional (ADF) program based on first-principles, we have in detail investigated the Zn _n (n = 2–20) clusters, several series of stacked structures, and the growth mechanism of zinc nanorods on silicone oil surfaces, which are isotropic, and can be generally considered as quasi-free sustained substrates. For the Zn _n (n = 2–20) clusters, some new ground-state structures are found. The additional boundary atoms can enhance the stability of the stacked structures containing unit cells. The structures from the transverse array of the unit cells on (002) crystal plane are more stable than those stacked along the [002] direction as atomic number increases. The transverse arrayed structures can grow along the [002] direction. However, there is an atomic dislocation between the (002) crystal planes. In fact, the dislocation forms its one side surface of (101). By means of a single point SCF calculation in the ADF program, the adsorption energies per atom on the (101) and (002) crystal planes are calculated. According to the Boltzmann distribution probability law, the adsorption probability on the (101) plane is larger than that on the (002) plane, and the ratio between them is about 24–900. This shows that the Zn nanorods grow preferentially along the [110] direction on the (101) planes. These are in good agreement with our experimental findings.     

Growth and Electronic Properties of Ag Nanoparticles on Reduced CeO2-x(111) Films

Ag nanoparticles grown on reduced CeO_2-x thin films have been studied by X-ray photoelec-tron spectroscopy and resonant photoelectron spectroscopy of the valence band to understand the effect of oxygen vacancies in the CeO_2-x thin films on the growth and interfacial elec-tronic properties of Ag. Ag grows as three-dimensional particles on the CeO_2-x(111) surface at 300 K. Compared to the fully oxidized ceria substrate surface, Ag favors the growth of smaller particles with a larger particle density on the reduced ceria substrate surface, which can be attributed to the nucleation of Ag on oxygen vacancies. The binding energy of Ag3d increases when the Ag particle size decreases, which is mainly attributed to the final-state screening. The interfacial interaction between Ag and CeO_2-x(111) is weak. The resonant enhancement of the 4f level of Ce³⁺ species in RPES indicates a partial Ce⁴⁺→Ce³⁺ re-duction after Ag deposited on reduced ceria surface. The sintering temperature of Ag on CeO_1.85(111) surface during annealing is a little higher than that of Ag on CeO₂(111) surface, indicating that Ag nanoparticles are more stable on the reduced ceria surface.     

An Ultrathin Inorganic Molecular Crystal Interfacial Layer for Stable Zn Anode

Zn metal anode suffers from dendrite growth and side reactions during cycling, significantly deteriorating the lifespan of aqueous Zn metal batteries. Herein, we introduced an ultrathin and ultra-flat Sb₂O₃ molecular crystal layer to stabilize Zn anode. The in situ optical and atomic force microscopes observations show that such a 10 nm Sb₂O₃ thin layer could ensure uniform under-layer Zn deposition with suppressed tip growth effect, while the traditional WO₃ layer undergoes an uncontrolled up-layer Zn deposition. The superior regulation capability is attributed to the good electronic-blocking ability and low Zn affinity of the molecular crystal layer, free of dangling bonds. Electrochemical tests exhibit Sb₂O₃ layer can significantly improve the cycle life of Zn anode from 72 h to 2800 h, in contrast to the 900 h of much thicker WO₃ even in 100 nm. This research opens up the application of inorganic molecular crystals as the interfacial layer of Zn anode.     

Bifunctional Interphase with Target-Distributed Desolvation Sites and Directionally Depositional Ion Flux for Sustainable Zinc Anode

Aqueous zinc batteries (AZBs) feature high safety and low cost, but intricate anodic side reactions and dendrite growth severely restrict their commercialization. Herein, ethylenediaminetetraacetic acid (EDTA) grafted metal organic framework (MOF-E) is proposed as a dually-functional anodic interphase for sustainable Zn anode. Specifically, the target-distributed EDTA serves as an ion-trapped tentacle to accelerate the desolvation and ionic transport by powerful chemical coordination, while the MOFs offer suitable ionic channels to induce oriented deposition. As a result, MOF-E interphase fundamentally suppresses side reactions and guides horizontally arranged Zn deposition with (002) preferred orientations. The Zn|MOF-E@Cu cell exhibits a markedly improved Coulombic efficiency of 99.7 % over 2500 cycles, and the MOF-E@Zn|KVOH (KV₁₂O_30-y ⋅ nH₂O) cell yields a steady circulation of 5000 cycles@90.47 % at 8 A g⁻¹.     

高择优锌-镍合金电沉积的现场ECSTM研究

采用"二步包封"法制备了性能良好的电化学STM针尖.以此为基础采用ECSTM现场研究了工艺条件下HOPG上高择优锌-镍合金的电沉积过程.研究结果表明这种高择优沉积层以侧向生长方式生长,而表面上电化学活性差的晶面构成了晶体生长过程的保留面,从而进一步形成了与基底表面方向一致的高择优沉积层,X射线研究表明这一择优面为(100)晶面.     

Molecular dynamics simulation of the crystal nucleation behavior of a single chain touching a substrate surface

Molecular dynamics simulation has been used in exploring the crystal nucleation behaviour of a single chain touching a substrate surface. It shows that a polyethylene chain (980 CH₂) changed its overall shape from an isotropic coil to an oriented one in the case of touching a substrate surface of amorphous carbons at 300 K. Most repeats of the chain were aligned and ordered in a zigzag package. Surprisingly, the direction of the package is not parallel to the plane of the substrate, but almost perpendicular to it. This is in accordance with experimental observations.     

Liquid-phase Reductive Deposition as Novel Preparation Method for Highly Dispersive Nickel Catalysts

We have been developing the selective deposition method onto TiO₂ nanoparticles, named as the liquid-phase selective-deposition method, where TiO₂ plays a role of formation center of Ni nanoparticles as well as protection from the aggregative growth of the particles. The concept of this method is to well disperse and stabilize Ni nanoparticles on TiO₂ surface by specific adsorption of Ni precursory complexes and then heterogeneous nucleation on the adsorption sites. The particle size was decreased with increasing the amount of Zn added, thus the catalytically active Ni surface area was increased. The selective deposition onto TiO₂ surface and addition of Zn to the nanoparticle promoted the catalytic activity of Ni–Zn nanoparticle, e.g. the catalytic activity of Ni–Zn/TiO₂ was ca. 10 times higher than that of the unsupported Ni nanoparticles. Ni in the nanocomposite was assigned as metallic, although their surface was oxidized under the atmospheric condition, but Zn and B were deposited as their oxide.     

Reversible Zn Metal Anodes Enabled by Trace Amounts of Underpotential Deposition Initiators

Routine electrolyte additives are not effective enough for uniform zinc (Zn) deposition, because they are hard to proactively guide atomic-level Zn deposition. Here, based on underpotential deposition (UPD), we propose an “escort effect” of electrolyte additives for uniform Zn deposition at the atomic level. With nickel ion (Ni²⁺) additives, we found that metallic Ni deposits preferentially and triggers the UPD of Zn on Ni. This facilitates firm nucleation and uniform growth of Zn while suppressing side reactions. Besides, Ni dissolves back into the electrolyte after Zn stripping with no influence on interfacial charge transfer resistance. Consequently, the optimized cell operates for over 900 h at 1 mA cm⁻² (more than 4 times longer than the blank one). Moreover, the universality of “escort effect” is identified by using Cr³⁺ and Co²⁺ additives. This work would inspire a wide range of atomic-level principles by controlling interfacial electrochemistry for various metal batteries.     

Materials Discovery and Crystal Growth of Zeolite A Type Zeolitic–Imidazolate Frameworks Revealed by Atomic Force Microscopy

A new zeolitic–imidazolate framework (ZIF), [Zn(imidazolate)_2?x(benzimidazolate)_x], that has the zeolite A (LTA) framework topology and contains relatively inexpensive organic linkers has been revealed using in situ atomic force microscopy. The new material was grown on the structure‐directing surface of [Zn(imidazolate)_1.5(5‐chlorobenzimidazolate)_0.5] (ZIF‐76) crystals, a metal–organic framework (MOF) that also possesses the LTA framework topology. The crystal growth processes for both [Zn(imidazolate)_2?x(benzimidazolate)_x] and ZIF‐76 were observed using in situ atomic force microscopy; it is the first time the growth process of a nanoporous material with the complex zeolite A (LTA) framework topology has been monitored temporally at the nanoscale. The results reveal the crystal growth mechanisms and possible surface terminations on the {100} and {111} facets of the materials under low supersaturation conditions. Surface growth of these structurally complex materials was found to proceed through both “birth‐and‐spread” and spiral crystal‐growth mechanisms, with the former occurring through the nucleation and spreading of metastable and stable sub‐layers reliant on the presence of non‐framework species to bridge the framework during formation. These results support the notion that the latter process may be a general mechanism of surface crystal growth applicable to numerous crystalline nanoporous materials of differing complexity and demonstrate that the methodology of seeded crystal growth can be used to discover previously unobtainable ZIFs and MOFs with desirable framework compositions.     

In situ STM study of zinc electrodeposition on Au(111) from the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethylsulfonate

The electrodeposition of Zn on Au(111) was investigated with cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) in the air and water stable ionic liquid 1-ethyl-3-methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) with a Zn(TfO)₂ concentration of 0.2 M. It has been found that the structure [EMIm]TfO/Au(111) is very complex. Furthermore, the addition of Zn(TfO)₂ changes the interfacial structure significantly. The first STM-probed Zn islands appear at +0.3 V, and their growth leads to the formation of a thin zinc layer. A bulk deposition of Zn is obtained with in situ STM at ?0.1 V. Furthermore, in situ STM reveals that the deposition of Zn is accompanied by the formation of Au-Zn surface alloys.     

Engineering Fluorine-rich Double Protective Layer on Zn Anode for Highly Reversible Aqueous Zinc-ion Batteries

The high thermodynamic instability and side reactions of Zn-metal anode (ZMA), especially at high current densities, greatly impede the commercialization of aqueous zinc-ion batteries (AZIBs). Herein, a fluorine-rich double protective layer strategy is proposed to obtain the high reversibility of AZIBs through the introduction of a versatile tetradecafluorononane-1,9-diol (TDFND) additive in aqueous electrolyte. TDFND molecule with large adsorption energy (−1.51 eV) preferentially absorbs on the Zn anode surface to form a Zn(OR)₂⁻ (R=−CH₂−(CF₂)₇−CH₂−) cross-linking complex network, which balances space electric field and controls the Zn²⁺ ion flux, thus enabling the uniform and compact deposition of Zn (002) crystal planes. Meanwhile, TDFND with low Lowest unoccupied molecular orbital (LUMO, 0.10 eV) energy level is priorly decomposed to regulate the interfacial chemistry of ZMA by building a ZnF₂-rich solid electrode/electrolyte interface (SEI) layer. It is found that a 14 nm-thick SEI layer delivers excellent structural integrity to suppress parasitic reactions by blocking the direct contact of active water and ZMA. Consequently, the Zn electrode exhibits a superior cycling life over 430 h at 10 mA cm⁻² and a high average Coulombic efficiency of 99.8 % at 5 mA cm⁻². Furthermore, a 68 mAh pouch cell delivers 80.3 % capacity retention for 1000 cycles.     

光催化合成金属Ag纳米颗粒的生长机制——晶核密度控制的生长模式转换

利用AgNO3水溶液,通过严格控制TiO2薄膜的化学活性,系统研究了在TiO2表面光催化合成金属Ag纳米颗粒的生长行为。研究发现,光催化合成金属Ag纳米颗粒存在着两个完全不同的生长机制,分别对应着金属Ag纳米颗粒的各向同性和各向异性生长。当溶液浓度较低时,Ostwald熟化(OR)机制主导着金属Ag纳米颗粒的长大过程;当溶液浓度较高时,取向附生(OA)机制决定着金属Ag纳米颗粒长大成纳米片。原位消光光谱分析表明,OR机制和OA机制生长的前期具有相近消光特征,决定金属Ag纳米颗粒生长模式的关键是AgNO3溶液的浓度,更准确地说是金属Ag初级晶核的局域密度。在此基础上提出了有关光催化合成金属Ag纳米颗粒的生长模型。     

光催化合成金属Ag纳米颗粒的生长机制——晶核密度控制的生长模式转换

利用AgNO₃水溶液,通过严格控制TiO₂薄膜的化学活性,系统研究了在TiO₂表面光催化合成金属Ag纳米颗粒的生长行为。研究发现,光催化合成金属Ag纳米颗粒存在着两个完全不同的生长机制,分别对应着金属Ag纳米颗粒的各向同性和各向异性生长。当溶液浓度较低时,Ostwald熟化（OR）机制主导着金属Ag纳米颗粒的长大过程;当溶液浓度较高时,取向附生（OA）机制决定着金属Ag纳米颗粒长大成纳米片。原位消光光谱分析表明,OR机制和OA机制生长的前期具有相近消光特征,决定金属Ag纳米颗粒生长模式的关键是AgNO₃溶液的浓度,更准确地说是金属Ag初级晶核的局域密度。在此基础上提出了有关光催化合成金属Ag纳米颗粒的生长模型。     

Oriented SrFe12O19 thin films prepared by chemical solution deposition

Thin films of SrFe₁₂O₁₉ (SrM) were prepared from a solution of iron and strontium alkoxides through the chemical solution deposition method on both amorphous (glassy SiO₂), and single crystal substrates (Si(100), Si(111), Ag(111), Al₂O₃(001), MgO(111), MgAl₂O₄(111), SrTiO₃(111)) substrates. The process of crystallization was investigated by means of powder diffraction, atomic force microscopy and scanning electron microscopy. Magnetization measurements, ferromagnetic and nuclear magnetic resonance were used for evaluation of anisotropy in the films. Whilst amorphous substrates enabled growth of randomly oriented SrM phase, use of single crystal substrates resulted in samples with different degree of oriented growth. The most pronounced oriented growth was observed on SrTiO₃(111). A detailed inspection revealed that growth of SrM phase starts through the breakup of initially continuous film into isolated grains with expressive shape anisotropy and hexagonal habit. A continuous film with epitaxial relations to the substrate was produced by repeating recoating and annealing.     

The combination of fluctuation-assisted crystallization and interface-assisted crystallization in a crystalline/crystalline blend of poly(ethylene oxide) and poly(ε-caprolactone)

The nucleation and crystallization of poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL) in the PEO/PCL blends have been investigated by means of optical microscopy (OM) and differential scanning calorimetry (DSC). During the isothermal or nonisothermal crystallization process, when the adjacent PEO is in the molten state, PCL nucleation preferentially occurs at the PEO and PCL interface; after the crystallization of the adjacent PEO, much more PCL nuclei form on the surface of the PEO crystal. However, PEO crystallizes normally and no interfacial nucleation occurs in the blend. The concentration fluctuation caused by liquid–liquid phase separation (LLPS) induces the motion of PEO and PCL chains through interdiffusion and possible orientation of chain segments. The oriented PEO chain segments can assist PCL nucleation, and the heterogeneous nucleation ability of PEO increases with the orientation of PEO chains. Oriented PCL chain segments have no heterogeneous nucleation ability on PEO. It is postulated that the interfacial nucleation of PCL in the PEO/PCL blend follows the combination of “fluctuation-assisted crystallization” and “interface-assisted crystallization” mechanisms.

Large‐Area Plasmonic Substrate of Silver‐Coated Iron Oxide Nanorod Arrays for Plasmon‐Enhanced Spectroscopy

One‐dimensional iron oxide materials fabricated on conducting glass substrates and their unique properties make these nanostructures promising candidates for a wide range of applications. Herein, vertically oriented α‐Fe₂O₃ nanorod arrays synthesized under hydrothermal conditions over a large area are described, as an active platform for surface‐enhanced resonance Raman scattering (SERRS) and surface‐enhanced fluorescence (SEF). From scanning electron microscopy images the formation of a homogeneous distribution of vertically oriented rods in a large area is confirmed. For activating the localized surface plasmon resonances, which are responsible for SERRS and SEF, a 6 nm layer of Ag is deposited onto the α‐Fe₂O₃ nanorod arrays by physical vapor deposition to form Ag islands.     

Zincophilic Electrode Interphase with Appended Proton Reservoir Ability Stabilizes Zn Metal Anodes

The rampant dendrites and hydrogen evolution reaction (HER) resulting from the turbulent interfacial evolution at the anode/electrolyte are the main culprits of short lifespan and low Coulombic efficiency of Zn metal batteries. In this work, a versatile protective coating with excellent zincophilic and amphoteric features is constructed on the surface of Zn metal (ZP@Zn) as dendrite-free anodes. This kind of protective coating possesses the advantages of reversible proton storage and rapid desolvation kinetics, thereby mitigating the HER and facilitating homogeneous nucleation concomitantly. Furthermore, the space charge polarization effect promotes charge redistribution to achieve uniform Zn deposition. Accordingly, the ZP@Zn symmetric cell manifests excellent reversibility at an ultrahigh cumulative plating capacity of 4700 mAh cm⁻² and stable cycling at 80 % depth of discharge (DOD). The ZP@Zn//V₆O₁₃ pouch cell also reveals superior cycling stability with a high capacity of 326.6 mAh g⁻¹.     

Bio-Inspired Polyanionic Electrolytes for Highly Stable Zinc-Ion Batteries

For zinc-ion batteries (ZIBs), the non-uniform Zn plating/stripping results in a high polarization and low Coulombic efficiency (CE), hindering the large-scale application of ZIBs. Here, inspired by biomass seaweed plants, an anionic polyelectrolyte alginate acid (SA) was used to initiate the in situ formation of the high-performance solid electrolyte interphase (SEI) layer on the Zn anode. Attribute to the anionic groups of −COO⁻, the affinity of Zn²⁺ ions to alginate acid induces a well-aligned accelerating channel for uniform plating. This SEI regulates the desolvation structure of Zn²⁺ and facilitates the formation of compact Zn (002) crystal planes. Even under high depth of discharge conditions (DOD), the SA-coated Zn anode still maintains a stable Zn stripping/plating behavior with a low potential difference (0.114 V). According to the classical nucleation theory, the nucleation energy for SA-coated Zn is 97 % less than that of bare Zn, resulting in a faster nucleation rate. The Zn||Cu cell assembled with the SA-coated electrode exhibits an outstanding average CE of 99.8 % over 1,400 cycles. The design is successfully demonstrated in pouch cells, where the SA-coated Zn exhibits capacity retention of 96.9 % compared to 59.1 % for bare Zn anode, even under the high cathode mass loading (>10 mg/cm²).     

Electrical-Conductive/Insulating Bi-Functional Layers for Stable Zn Metal Anode

Zinc-ion batteries are regarded as an extremely promising candidate for large-scale energy storage equipment due to the inexpensive ingredients and high safety. However, dendrite growth and side reactions occur in the Zn anode, which lead to exceedingly low coulombic efficiency (CE) and poor cycling stability. In this work, we propose a strategy of a conductive/insulating bi-functional coating layer (CIBL) for stable Zn metal anodes. Porous Ag nanowires (NWs) coating as a conductive layer effectively reduces the nuclear barrier and contains Zn²⁺ deposition in a certain space. Polyimide (PI) coatings as insulating layer implement a shunting effect on Zn²⁺, which could reduce the differential concentration on the Zn surface and induce uniform deposition of Zn²⁺. Therefore, the CIBL−Zn//CIBL−Zn battery achieves stable plating/stripping of over 1300 h at 1 mA cm⁻². The CE of CIBL−Zn//CIBL−Zn battery maintains at 99.2 % even after 1000 cycles. Moreover, the CIBL−Zn//V₂O₅ battery exhibits a capacity of nearly 289.2 mA h g⁻¹ at 5 A g⁻¹ after 3000 cycles and no sign of capacity degradation is found, which further demonstrate the feasibility of this strategy in practical application.