Probing the Local Reaction Environment During High Turnover Carbon Dioxide Reduction with Ag-Based Gas Diffusion Electrodes

Discerning the influence of electrochemical reactions on the electrode microenvironment is an unavoidable topic for electrochemical reactions that involve the production of OH⁻ and the consumption of water. That is particularly true for the carbon dioxide reduction reaction (CO₂RR), which together with the competing hydrogen evolution reaction (HER) exert changes in the local OH⁻ and H₂O activity that in turn can possibly affect activity, stability, and selectivity of the CO₂RR. We determine the local OH⁻ and H₂O activity in close proximity to a CO₂-converting Ag-based gas diffusion electrode (GDE) with product analysis using gas chromatography. A Pt nanosensor is positioned in the vicinity of the working GDE using shear-force-based scanning electrochemical microscopy (SECM) approach curves, which allows monitoring changes invoked by reactions proceeding within an otherwise inaccessible porous GDE by potentiodynamic measurements at the Pt-tip nanosensor. We show that high turnover HER/CO₂RR at a GDE lead to modulations of the alkalinity of the local electrolyte, that resemble a 16 m KOH solution, variations that are in turn linked to the reaction selectivity.     

Breaking K+ Concentration Limit on Cu Nanoneedles for Acidic Electrocatalytic CO2 Reduction to Multi-Carbon Products

Electrocatalytic CO₂ reduction reaction (CO₂RR) to multi-carbon products (C₂₊) in acidic electrolyte is one of the most advanced routes for tackling our current climate and energy crisis. However, the competing hydrogen evolution reaction (HER) and the poor selectivity towards the valuable C₂₊ products are the major obstacles for the upscaling of these technologies. High local potassium ions (K⁺) concentration at the cathode's surface can inhibit proton-diffusion and accelerate the desirable carbon-carbon (C−C) coupling process. However, the solubility limit of potassium salts in bulk solution constrains the maximum achievable K⁺ concentration at the reaction sites and thus the overall acidic CO₂RR performance of most electrocatalysts. In this work, we demonstrate that Cu nanoneedles induce ultrahigh local K⁺ concentrations (4.22 M) – thus breaking the K⁺ solubility limit (3.5 M) – which enables a highly efficient CO₂RR in 3 M KCl at pH=1. As a result, a Faradaic efficiency of 90.69±2.15 % for C₂₊ (FE_C2+) can be achieved at 1400 mA.cm⁻², simultaneous with a single pass carbon efficiency (SPCE) of 25.49±0.82 % at a CO₂ flow rate of 7 sccm.     

Selective CO2 Electroreduction to Ethylene and Multicarbon Alcohols via Electrolyte‐Driven Nanostructuring

Production of multicarbon products (C₂₊) from CO₂ electroreduction reaction (CO₂RR) is highly desirable for storing renewable energy and reducing carbon emission. The electrochemical synthesis of CO₂RR catalysts that are highly selective for C₂₊ products via electrolyte‐driven nanostructuring is presented. Nanostructured Cu catalysts synthesized in the presence of specific anions selectively convert CO₂ into ethylene and multicarbon alcohols in aqueous 0.1 m KHCO₃ solution, with the iodine‐modified catalyst displaying the highest Faradaic efficiency of 80 % and a partial geometric current density of ca. 31.2 mA cm^?2 for C₂₊ products at ?0.9 V vs. RHE. Operando X‐ray absorption spectroscopy and quasi in situ X‐ray photoelectron spectroscopy measurements revealed that the high C₂₊ selectivity of these nanostructured Cu catalysts can be attributed to the highly roughened surface morphology induced by the synthesis, presence of subsurface oxygen and Cu⁺ species, and the adsorbed halides.     

The Functionality of Surface Hydroxy Groups on the Selectivity and Activity of Carbon Dioxide Reduction over Cuprous Oxide in Aqueous Solutions

Carbon dioxide (CO₂) reduction in aqueous solutions is an attractive strategy for carbon capture and utilization. Cuprous oxide (Cu₂O) is a promising catalyst for CO₂ reduction as it can convert CO₂ into valuable hydrocarbons and suppress the side hydrogen evolution reaction (HER). However, the nature of the active sites in Cu₂O remains under debate because of the complex surface structure of Cu₂O under reducing conditions, leading to limited guidance in designing improved Cu₂O catalysts. This paper describes the functionality of surface‐bonded hydroxy groups on partially reduced Cu₂O(111) for the CO₂ reduction reaction (CO₂RR) by combined density functional theory (DFT) calculations and experimental studies. We find that the surface hydroxy groups play a crucial role in the CO₂RR and HER, and a moderate coverage of hydroxy groups is optimal for promotion of the CO₂RR and suppression of the HER simultaneously. Electronic structure analysis indicates that the charge transfer from hydroxy groups to coordination‐unsaturated Cu (Cu_CUS) sites stabilizes surface‐adsorbed COOH*, which is a key intermediate during the CO₂RR. Moreover, the CO₂RR was evaluated over Cu₂O octahedral catalysts with {111} facets and different surface coverages of hydroxy groups, which demonstrates that Cu₂O octahedra with moderate coverage of hydroxy groups can indeed enhance the CO₂RR and suppress the HER.     

CO\begin{document}$ _{2} $\end{document} Reduction on Metal-Doped SnO\begin{document}$ _{2} $\end{document}(110) Surface Catalysts: Manipulating the Product by Changing the Ratio of Sn:O

The electrocatalytic carbon dioxide reduction reaction (CO₂RR) producing HCOOH and CO is one of the most promising approaches for storing renewable electricity as chemical energy in fuels. SnO₂ is a good catalyst for CO₂-to-HCOOH or CO₂-to-CO conversion, with different crystal planes participating the catalytic process. Among them, (110) surface SnO₂ is very stable and easy to synthesisze. By changing the ratio of Sn: O for SnO₂(110), we have two typical SnO₂ thin films: fully oxidized (stoichiometric) and partially reduced. In this work, we are concerned with different metals (Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, Os, Ir, Pt, and Au)-doped SnO₂(110) with different activity and selectivity for CO₂RR. All these changes are manipulated by adjusting the ratio of Sn: O in (110) surface. The results show that stochiometric and reduced Cu/Ag doped SnO₂(110) have different selectivity for CO₂RR. More specifically, stochiometric Cu/Ag-doped SnO₂(110) tends to generate CO(g). Meanwhile, the reduced surface tends to generate HCOOH(g). Moreover, we also considered the competitive hydrogen evolution reaction (HER). The catalysts SnO₂(110) doped by Ru, Rh, Pd, Os, Ir, and Pt have high activity for HER, and others are good catalysts for CO₂RR.     

An Interfacial View of Cation Effects on Electrocatalysis Systems

The identity of alkali metal cations in the electrolyte of electrocatalysis systems has been recently introduced as a crucial factor to tailor the kinetics and Faradaic efficiency of many electrocatalytic reactions. In this Minireview, we have summarized the recent advances in the molecular-level understanding of cation effects on relevant electrocatalytic processes such as hydrogen evolution (HER), oxygen evolution (OER), and CO₂ electroreduction (CO₂RR) reactions. The discussion covers the effects of electrolyte cations on interfacial electric fields, structural organization of interfacial water molecules, blocking the catalytic active sites, stabilization or destabilization of intermediates, and interfacial pHs. These cation-induced interfacial phenomena have been reported to impact the performance (activity, selectivity, and stability) of electrochemical reactions collaboratively or independently. We describe that although there is almost a general agreement on the relationship between the size of alkali cations and the activities of HER, OER, and CO₂RR, however, the mechanism by which the performance of these electrocatalytic reactions is influenced by alkali metal cations is still in debate.     

Polyoxometalate-based electron transfer modulation for efficient electrocatalytic carbon dioxide reduction

The electrocatalytic carbon dioxide (CO₂) reduction reaction (CO₂RR) involves a variety of electron transfer pathways, resulting in poor reaction selectivity, limiting its use to meet future energy requirements. Polyoxometalates (POMs) can both store and release multiple electrons in the electrochemical process, and this is expected to be an ideal “electron switch” to match with catalytically active species, realize electron transfer modulation and promote the activity and selectivity of the electrocatalytic CO₂RR. Herein, we report a series of new POM-based manganese-carbonyl (MnL) composite CO₂ reduction electrocatalysts, whereby SiW₁₂–MnL exhibits the most remarkable activity and selectivity for CO₂RR to CO, resulting in an increase in the faradaic efficiency (FE) from 65% (MnL) to a record-value of 95% in aqueous electrolyte. A series of control electrochemical experiments, photoluminescence spectroscopy (PL), transient photovoltage (TPV) experiments, and density functional theory (DFT) calculations revealed that POMs act as electronic regulators to control the electron transfer process from POM to MnL units during the electrochemical reaction, enhancing the selectivity of the CO₂RR to CO and depressing the competitive hydrogen evolution reaction (HER). This work demonstrates the significance of electron transfer modulation in the CO₂RR and suggests a new idea for the design of efficient electrocatalysts towards CO₂RR.

Polyoxometalates as electron regulators to promote the carbonyl manganese (MnL) electrocatalyst for highly efficient CO₂ reduction in aqueous electrolyte.     

Bipyridine‐Assisted Assembly of Au Nanoparticles on Cu Nanowires To Enhance the Electrochemical Reduction of CO2

We report a new strategy to prepare a composite catalyst for highly efficient electrochemical CO₂ reduction reaction (CO₂RR). The composite catalyst is made by anchoring Au nanoparticles on Cu nanowires via 4,4′‐bipyridine (bipy). The Au‐bipy‐Cu composite catalyzes the CO₂RR in 0.1 m KHCO₃ with a total Faradaic efficiency (FE) reaching 90.6 % at ?0.9 V to provide C‐products, among which CH₃CHO (25 % FE) dominates the liquid product (HCOO^?, CH₃CHO, and CH₃COO^?) distribution (75 %). The enhanced CO₂RR catalysis demonstrated by Au‐bipy‐Cu originates from its synergistic Au (CO₂ to CO) and Cu (CO to C‐products) catalysis which is further promoted by bipy. The Au‐bipy‐Cu composite represents a new catalyst system for effective CO₂RR conversion to C‐products.     

Circumventing the scaling relationship on bimetallic monolayer electrocatalysts for selective CO2 reduction

Electrochemical conversion of CO₂ into value-added chemicals continues to draw interest in renewable energy applications. Although many metal catalysts are active in the CO₂ reduction reaction (CO₂RR), their reactivity and selectivity are nonetheless hindered by the competing hydrogen evolution reaction (HER). The competition of the HER and CO₂RR stems from the energy scaling relationship between their reaction intermediates. Herein, we predict that bimetallic monolayer electrocatalysts (BMEs) – a monolayer of transition metals on top of extended metal substrates – could produce dual-functional active sites that circumvent the scaling relationship between the adsorption energies of HER and CO₂RR intermediates. The antibonding interaction between the adsorbed H and the metal substrate is revealed to be responsible for circumventing the scaling relationship. Based on extensive density functional theory (DFT) calculations, we identify 11 BMEs which are highly active and selective toward the formation of formic acid with a much suppressed HER. The H–substrate antibonding interaction also leads to superior CO₂RR performance on monolayer-coated penta-twinned nanowires.

Dual-functional active sites are designed to circumvent the scaling relationship between the HER and CO₂RR on bimetallic monolayer electrocatalysts.     

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO₂ reduction reaction (CO₂RR) over Cu catalysts exhibits enormous potential for efficiently converting CO₂ to ethylene (C₂H₄). However, achieving high C₂H₄ selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO₂RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO₂ reduction to C₂H₄ products. An excellent Faraday efficiency (FE) of 63.6 % on C₂H₄ with a current density of 497.2 mA cm⁻² in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH₄. The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cu^δ+ during the CO₂RR. Furthermore, theoretical calculations demonstrate that the Cu^δ+/Cu⁰ interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C₂H₄ production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO₂ reduction to value-added chemicals.     

Dynamic Changes in the Structure,Chemical State and Catalytic Selectivity of Cu Nanocubes during CO2 Electroreduction: Size and Support Effects

In situ and operando spectroscopic and microscopic methods were used to gain insight into the correlation between the structure, chemical state, and reactivity of size‐ and shape‐controlled ligand‐free Cu nanocubes during CO₂ electroreduction (CO₂RR). Dynamic changes in the morphology and composition of Cu cubes supported on carbon were monitored under potential control through electrochemical atomic force microscopy, X‐ray absorption fine‐structure spectroscopy and X‐ray photoelectron spectroscopy. Under reaction conditions, the roughening of the nanocube surface, disappearance of the (100) facets, formation of pores, loss of Cu and reduction of CuO_x species observed were found to lead to a suppression of the selectivity for multi‐carbon products (i.e. C₂H₄ and ethanol) versus CH₄. A comparison with Cu cubes supported on Cu foils revealed an enhanced morphological stability and persistence of Cu^I species under CO₂RR in the former samples. Both factors are held responsible for the higher C₂/C₁ product ratio observed for the Cu cubes/Cu as compared to Cu cubes/C. Our findings highlight the importance of the structure of the active nanocatalyst but also its interaction with the underlying substrate in CO₂RR selectivity.     

Dynamic Changes in the Structure,Chemical State and Catalytic Selectivity of Cu Nanocubes during CO2 Electroreduction: Size and Support Effects

In situ and operando spectroscopic and microscopic methods were used to gain insight into the correlation between the structure, chemical state, and reactivity of size‐ and shape‐controlled ligand‐free Cu nanocubes during CO₂ electroreduction (CO₂RR). Dynamic changes in the morphology and composition of Cu cubes supported on carbon were monitored under potential control through electrochemical atomic force microscopy, X‐ray absorption fine‐structure spectroscopy and X‐ray photoelectron spectroscopy. Under reaction conditions, the roughening of the nanocube surface, disappearance of the (100) facets, formation of pores, loss of Cu and reduction of CuO_x species observed were found to lead to a suppression of the selectivity for multi‐carbon products (i.e. C₂H₄ and ethanol) versus CH₄. A comparison with Cu cubes supported on Cu foils revealed an enhanced morphological stability and persistence of Cu^I species under CO₂RR in the former samples. Both factors are held responsible for the higher C₂/C₁ product ratio observed for the Cu cubes/Cu as compared to Cu cubes/C. Our findings highlight the importance of the structure of the active nanocatalyst but also its interaction with the underlying substrate in CO₂RR selectivity.     

Effect of pore diameter and length on electrochemical CO2 reduction reaction at nanoporous gold catalysts

In this work, we employ differential electrochemical mass spectrometry (DEMS) to track the real-time evolution of CO at nanoporous gold (NpAu) catalysts with varying pore parameters (diameter and length) during the electrochemical CO₂ reduction reaction (CO₂RR). We show that due to the increase in the local pH with increasing catalyst roughness, NpAu catalysts suppress the bicarbonate-mediated hydrogen evolution reaction (HER) compared to a flat Au electrode. Additionally, the geometric current density for CO₂RR increases with the roughness of NpAu catalysts, which we attribute to the increased availability of active sites at NpAu catalysts. Together, the enhancement of CO₂RR and the suppression of competing HER results in a drastic increase in the faradaic selectivity for CO₂RR with increasing pore length and decreasing pore diameter, reaching near 100% faradaic efficiency for CO in the most extreme case. Interestingly, unlike the geometric current density, the specific current density for CO₂RR has a more complicated relation with the roughness of the NpAu catalysts. We show that this is due to the presence of ohmic drop effects along the length of the porous channels. These ohmic drop effects render the pores partially electrocatalytically inactive and hence, they play an important role in tuning the CO₂RR activity on nanoporous catalysts.

In this work, we employ differential electrochemical mass spectrometry (DEMS) to track the real-time evolution of CO at nanoporous gold (NpAu) catalysts with varying pore parameters (diameter and length) during the electrochemical CO₂ reduction reaction (CO₂RR).     

Molecular Engineering of Cation Solvation Structure for Highly Selective Carbon Dioxide Electroreduction

Balancing the activation of H₂O is crucial for highly selective CO₂ electroreduction (CO₂RR), as the protonation steps of CO₂RR require fast H₂O dissociation kinetics, while suppressing hydrogen evolution (HER) demands slow H₂O reduction. We herein proposed one molecular engineering strategy to regulate the H₂O activation using aprotic organic small molecules with high Gutmann donor number as a solvation shell regulator. These organic molecules occupy the first solvation shell of K⁺ and accumulate in the electrical double layer, decreasing the H₂O density at the interface and the relative content of proton suppliers (free and coordinated H₂O), suppressing the HER. The adsorbed H₂O was stabilized via the second sphere effect and its dissociation was promoted by weakening the O−H bond, which accelerates the subsequent *CO₂ protonation kinetics and reduces the energy barrier. In the model electrolyte containing 5 M dimethyl sulfoxide (DMSO) as an additive (KCl-DMSO-5), the highest CO selectivity over Ag foil increased to 99.2 %, with FE_CO higher than 90.0 % within −0.75 to −1.15 V (vs. RHE). This molecular engineering strategy for cation solvation shell can be extended to other metal electrodes, such as Zn and Sn, and organic molecules like N,N-dimethylformamide.     

Organic Additive-derived Films on Cu Electrodes Promote Electrochemical CO2 Reduction to C2+ Products Under Strongly Acidic Conditions

Electrochemical CO₂ reduction (CO₂R) at low pH is desired for high CO₂ utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO₂R at low pH. Herein we report an alternative approach to selective CO₂R (>70 % Faradaic efficiency for C₂₊ products, FE_C2+) at low pH (pH 2; H₃PO₄/KH₂PO₄) and low potassium concentration ([K⁺]=0.1 M) using organic film-modified polycrystalline copper (Modified-Cu). Such an electrode effectively mitigates HER due to attenuated proton transport. Modified-Cu still achieves high FE_C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H₃PO₄ (pH≈1) at low [K⁺] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.     

Recent advances in single atom catalysts for the electrochemical carbon dioxide reduction reaction

The electrochemical carbon dioxide reduction reaction (CO₂RR) offers a promising solution to mitigate carbon emission and at the same time generate valuable carbonaceous chemicals/fuels. Single atom catalysts (SACs) are encouraging to catalyze the electrochemical CO₂RR due to the tunable electronic structure of the central metal atoms, which can regulate the adsorption energy of reactants and reaction intermediates. Moreover, SACs form a bridge between homogeneous and heterogeneous catalysts, providing an ideal platform to explore the reaction mechanism of electrochemical reactions. In this review, we first discuss the strategies for promoting the CO₂RR performance, including suppression of the hydrogen evolution reaction (HER), generation of C₁ products and formation of C₂₊ products. Then, we summarize the recent developments in regulating the structure of SACs toward the CO₂RR based on the above aspects. Finally, several issues regarding the development of SACs for the CO₂RR are raised and possible solutions are provided.

The electrochemical carbon dioxide reduction reaction (CO₂RR) offers a promising solution to mitigate carbon emission and at the same time generate valuable carbonaceous chemicals/fuels.     

An Artificial Electrode/Electrolyte Interface for CO2 Electroreduction by Cation Surfactant Self-Assembly

In this work, an artificial electrode/electrolyte (E/E) interface, made by coating the electrode surface with a quaternary ammonium cation (R₄N⁺) surfactant, was successfully developed, leading to a change in the CO₂ reduction reaction (CO₂RR) pathway. This artificial E/E interface, with high CO₂ permeability, promotes CO₂ transportation and hydrogenation, as well as suppresses the hydrogen evolution reaction (HER). Linear and branched surfactants facilitated formic acid and CO production, respectively. Molecular dynamics simulations show that the artificial interface provided a facile CO₂ diffusion pathway. Moreover, density-functional theory (DFT) calculations revealed the stabilization of the key intermediate, OCHO*, through interactions with R₄N⁺. This strategy might also be applicable to other electrocatalytic reactions where gas consumption is involved.     

In Situ Reconstruction of a Hierarchical Sn‐Cu/SnOx Core/Shell Catalyst for High‐Performance CO2 Electroreduction

The electrochemical CO₂ reduction reaction (CO₂RR) to give C₁ (formate and CO) products is one of the most techno‐economically achievable strategies for alleviating CO₂ emissions. Now, it is demonstrated that the SnO_x shell in Sn_2.7Cu catalyst with a hierarchical Sn‐Cu core can be reconstructed in situ under cathodic potentials of CO₂RR. The resulting Sn_2.7Cu catalyst achieves a high current density of 406.7±14.4 mA cm^?2 with C₁ Faradaic efficiency of 98.0±0.9 % at ?0.70 V vs. RHE, and remains stable at 243.1±19.2 mA cm^?2 with a C₁ Faradaic efficiency of 99.0±0.5 % for 40 h at ?0.55 V vs. RHE. DFT calculations indicate that the reconstructed Sn/SnO_x interface facilitates formic acid production by optimizing binding of the reaction intermediate HCOO* while promotes Faradaic efficiency of C₁ products by suppressing the competitive hydrogen evolution reaction, resulting in high Faradaic efficiency, current density, and stability of CO₂RR at low overpotentials.     

Sulfur Changes the Electrochemical CO2 Reduction Pathway over Cu Electrocatalysts

Electrochemical CO₂ reduction to value-added chemicals or fuels offers a promising approach to reduce carbon emissions and alleviate energy shortage. Cu-based electrocatalysts have been widely reported as capable of reducing CO₂ to produce a variety of multicarbon products (e.g., ethylene and ethanol). In this work, we develop sulfur-doped Cu₂O electrocatalysts, which instead can electrochemically reduce CO₂ to almost exclusively formate. We show that a dynamic equilibrium of S exists at the Cu₂O-electrolyte interface, and S-doped Cu₂O undergoes in situ surface reconstruction to generate active S-adsorbed metallic Cu sites during the CO₂ reduction reaction (CO₂RR). Density functional theory (DFT) calculations together with in situ infrared absorption spectroscopy measurements show that the S-adsorbed metallic Cu surface can not only promote the formation of the *OCHO intermediate but also greatly suppress *H and *COOH adsorption, thus facilitating CO₂-to-formate conversion during the electrochemical CO₂RR.     

Regulating Efficient and Selective Single-atom Catalysts for Electrocatalytic CO2 Reduction

Anchoring transition metal (TM) atoms on suitable substrates to form single-atom catalysts (SACs) is a novel approach to constructing electrocatalysts. Graphdiyne with sp−sp² hybridized carbon atoms and uniformly distributed pores have been considered as a potential carbon material for supporting metal atoms in a variety of catalytic processes. Herein, density functional theory (DFT) calculations were performed to study the single TM atom anchoring on graphdiyne (TM₁−GDY, TM=Sc, Ti, V, Cr, Mn, Co and Cu) as the catalysts for CO₂ reduction. After anchoring metal atoms on GDY, the catalytic activity of TM₁−GDY (TM=Mn, Co and Cu) for CO₂ reduction reaction (CO₂RR) are significantly improved comparing with the pristine GDY. Among the studied TM₁−GDY, Cu₁−GDY shows excellent electrocatalytic activity for CO₂ reduction for which the product is HCOOH and the limiting potential (U_L) is −0.16 V. Mn₁−GDY and Co₁−GDY exhibit superior catalytic selectivity for CO₂ reduction to CH₄ with U_L of −0.62 and −0.34 V, respectively. The hydrogen evolution reaction (HER) by TM₁−GDY (TM=Mn, Co and Cu) occurs on carbon atoms, while the active sites of CO₂RR are the transition metal atoms . The present work is expected to provide a solid theoretical basis for CO₂ conversion into valuable hydrocarbons.